Lenovo Ideapad S10

I thought I may as well start a s10 thread as there seems to be a thread for every other netbook.  I just received mine and I will post anything relevant to the s10 on arch here.  Perhaps others have arch on s10 comments.
Last edited by webbrewer (2009-01-26 05:26:24)

webbrewer wrote:Also, the volume buttons (Fn-Left and Fn-Right) need to have keybinding to work.  I have not messed with those yet.
Put something like
snip
in your ~/.Xmodmap file, then you can map the XF86Audio* keys to the correct functions in your window manager.  This may not be necessary in all window managers but I had to do this before fluxbox would recognize the keypresses.
[b]EDIT:  This seems to only be necessary in flux for whatever reason.  I'm back to my normal dwm and this messed the keybinds up, so I'll remove them from this thread until I do some further experimenting.
I also found that 866 what the best framebuffer resolution the same way you did
Instead of configuring in xorg.conf, I used hotplugging and an excerpt from a forum post to get the mousepad working correctly.  I still have no xorg.conf.  I will edit this post with the fdi file I used for the trackpad when I have my s10 with me.
I've tested the webcam, the linux-uvc-svn-all package in the aur works fine for me.  The mic on the other hand looks like it needs a newer version of alsa -- http://www.linlap.com/wiki/lenovo+ideapad+s10 reports that .18a worked in ubuntu and the current package available in arch is .18.  Alsa has release .19 and I quickly rebuilt the package to see if it would fix my problem but I had no luck.  I probably need to rebuild more packages as well.
I have not tested the card reader but I plan on testing that when I get home tonight.
Last edited by rson451 (2009-01-30 00:36:58)

Similar Messages

  • No Webcam on my Lenovo Ideapad S10 - Please Help

    Hi
    I own a Lenovo Ideapad S10 with Windows XP. 
    When I bought the computer, the inbuilt webcam was working perfectly. Then, all of a sudden, the webcam somehow disappeared. 
    When I press Fn + Esc, it says the Webcam is not installed. 
    I read all the forum posts and tried to down load the Easy Cam Driver for S10 with Windows XP. No Driver shows up for the Camera (http://consumersupport.lenovo.com/us/en/DriversDow​nloads/drivers_list.aspx?CategoryID=43)
    Can someone please help me ?
    Cheers
    Mihir

    un-install drivers, restart your computer and re-install camera drivers for couple of times.
    if it doesn't work, perform clean windows installation otherwise contact local support center.

  • [Lenovo IdeaPad S10-3t] Waking up from suspend not working properly

    Hi,
    I'm having some issues with getting suspend to work on my S10-3t. I tried pm-utils and the s2ram script (with about any combination of options as my machine is not on the whitelist) and always get the same behaviour: Suspending seems to succeed but waking up takes about 5 minutes.
    I tried using pm-suspend under ubuntu 10.10, works flawlessly out of the box, so it *can* be done.. somehow.
    Apparently this was a kernel related issue in older versions of ubuntu too, I couldn't quite figure out how they fixed it though (https://bugs.launchpad.net/ubuntu/+sour … bug/598664).
    I tailed the pm-suspend.log and kernel.log through one suspend/wake up cycle, here's the output:
    pm-suspend.log:
    bash-4.1$ date;sudo tail -f /var/log/pm-suspend.log
    Sun Oct 24 20:27:47 CEST 2010
    Password:
    Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
    /usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
    /usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
    /usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
    Sun Oct 24 20:25:36 CEST 2010: Finished.
    tail: /var/log/pm-suspend.log: file truncated
    Initial commandline parameters:
    Sun Oct 24 20:29:08 CEST 2010: Running hooks for suspend.
    Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
    Linux netarch.haselwarter.org 2.6.35-ARCH #1 SMP PREEMPT Wed Sep 29 07:17:20 UTC 2010 i686 Intel(R) Atom(TM) CPU N470 @ 1.83GHz GenuineIntel GNU/Linux
    Module Size Used by
    cpufreq_ondemand 6971 2
    btusb 9745 0
    hid_cando 2611 0
    bluetooth 44753 1 btusb
    rfkill 12854 1 bluetooth
    usbhid 33564 0
    hid 60400 2 hid_cando,usbhid
    uvcvideo 53488 0
    videodev 39124 1 uvcvideo
    v4l1_compat 13562 2 uvcvideo,videodev
    joydev 7503 0
    snd_seq_dummy 1079 0
    snd_seq_oss 25072 0
    snd_seq_midi_event 4496 1 snd_seq_oss
    snd_seq 41752 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_seq_device 4369 3 snd_seq_dummy,snd_seq_oss,snd_seq
    snd_hda_codec_conexant 26292 1
    snd_pcm_oss 33662 0
    i915 267072 2
    snd_mixer_oss 14686 1 snd_pcm_oss
    snd_hda_intel 19020 0
    snd_hda_codec 67274 2 snd_hda_codec_conexant,snd_hda_intel
    drm_kms_helper 22043 1 i915
    drm 134132 3 i915,drm_kms_helper
    snd_hwdep 4764 1 snd_hda_codec
    snd_pcm 58308 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
    lib80211_crypt_tkip 7521 0
    uhci_hcd 19251 0
    snd_timer 15423 2 snd_seq,snd_pcm
    broadcom 5201 0
    i2c_algo_bit 4407 1 i915
    ehci_hcd 32860 0
    snd 43283 11 snd_seq_oss,snd_seq,snd_seq_device,snd_hda_codec_conexant,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
    soundcore 5025 1 snd
    video 15889 1 i915
    wl 1943997 0
    tg3 115656 0
    usbcore 121737 6 btusb,usbhid,uvcvideo,uhci_hcd,ehci_hcd
    output 1448 1 video
    snd_page_alloc 5981 2 snd_hda_intel,snd_pcm
    intel_agp 24510 2 i915
    wmi 5962 0
    battery 7879 0
    i2c_i801 7426 0
    ac 2329 0
    i2c_core 15599 6 videodev,i915,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
    psmouse 51529 0
    evdev 6820 9
    libphy 14543 2 broadcom,tg3
    lib80211 3158 2 lib80211_crypt_tkip,wl
    agpgart 23520 2 drm,intel_agp
    sg 20932 0
    thermal 9786 0
    coretemp 4665 0
    button 3746 1 i915
    serio_raw 3566 0
    acpi_cpufreq 5157 1
    freq_table 1999 2 cpufreq_ondemand,acpi_cpufreq
    processor 25126 3 acpi_cpufreq
    mperf 979 1 acpi_cpufreq
    rtc_cmos 7746 0
    rtc_core 11831 1 rtc_cmos
    rtc_lib 1494 1 rtc_core
    ext4 282610 1
    mbcache 4290 1 ext4
    jbd2 58396 1 ext4
    crc16 1053 1 ext4
    sd_mod 26768 3
    ahci 17813 0
    libahci 16174 3 ahci
    libata 140771 2 ahci,libahci
    scsi_mod 105888 3 sg,sd_mod,libata
    total used free shared buffers cached
    Mem: 2053592 233156 1820436 0 24724 102332
    -/+ buffers/cache: 106100 1947492
    Swap: 1952764 0 1952764
    /usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
    /usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
    /usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/01laptop-mode suspend suspend:
    /usr/lib/pm-utils/sleep.d/01laptop-mode suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend:
    /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
    /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend:
    Having NetworkManager put all interaces to sleep...Done.
    /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
    /usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
    /usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/91wicd suspend suspend:
    Unable to connect to wicd daemon - is it running?
    /usr/lib/pm-utils/sleep.d/91wicd suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
    /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
    /usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
    Kernel modesetting video driver detected, not using quirks.
    /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
    /usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
    Sun Oct 24 20:29:10 CEST 2010: performing suspend
    Switching from vt7 to vt1
    fbcon fb0 state 1
    fbcon fb0 state 0
    switching back to vt7
    Sun Oct 24 20:34:40 CEST 2010: Awake.
    Sun Oct 24 20:34:40 CEST 2010: Running hooks for resume
    Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:
    /usr/lib/pm-utils/sleep.d/99video resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:
    /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:
    /usr/lib/pm-utils/sleep.d/95led resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:
    /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/91wicd resume suspend:
    Unable to connect to wicd daemon - is it running?
    /usr/lib/pm-utils/sleep.d/91wicd resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:
    /usr/lib/pm-utils/sleep.d/90clock resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
    Reloaded unloaded modules.
    /usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend:
    Having NetworkManager wake interfaces back up...Done.
    /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend:
    /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/11netcfg resume suspend:
    /usr/lib/pm-utils/sleep.d/11netcfg resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/01laptop-mode resume suspend:
    tail: /var/log/pm-suspend.log: file truncated
    Laptop mode
    tail: /var/log/pm-suspend.log: file truncated
    enabled, not active
    Error for wireless request "Set Power Management" (8B2C) :
    SET failed on device eth0 ; Operation not supported.
    tail: /var/log/pm-suspend.log: file truncated
    Failed.
    /usr/lib/pm-utils/sleep.d/01laptop-mode resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
    /usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
    /usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
    /usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
    Sun Oct 24 20:34:44 CEST 2010: Finished.
    kernel.log:
    bash-4.1$ sudo tail -f /var/log/kernel.log
    Password:
    Oct 24 20:27:15 netarch kernel: input: Cando Corporation Cando 10.1 Multi Touch Panel with Controller as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input9
    Oct 24 20:27:15 netarch kernel: cando-touch 0003:2087:0A01.0001: input,hidraw0: USB HID v1.11 Device [Cando Corporation Cando 10.1 Multi Touch Panel with Controller] on usb-0000:00:1d.1-1/input0
    Oct 24 20:27:15 netarch kernel: EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
    Oct 24 20:27:15 netarch kernel: EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
    Oct 24 20:27:15 netarch kernel: Adding 1952764k swap on /dev/sda2. Priority:-1 extents:1 across:1952764k
    Oct 24 20:27:16 netarch kernel: tg3 0000:05:00.0: irq 45 for MSI/MSI-X
    Oct 24 20:27:16 netarch kernel: tg3 0000:05:00.0: eth0: Link is down
    Oct 24 20:27:17 netarch kernel: CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
    Oct 24 20:27:18 netarch kernel: tg3 0000:05:00.0: eth0: Link is down
    Oct 24 20:27:19 netarch kernel: WARNING! power/level is deprecated; use power/control instead
    Oct 24 20:29:08 netarch kernel: CE: hpet increased min_delta_ns to 7500 nsec
    Oct 24 20:29:08 netarch kernel: ata1.00: configured for UDMA/100
    Oct 24 20:29:08 netarch kernel: ata1: EH complete
    Oct 24 20:29:08 netarch kernel: EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
    Oct 24 20:34:40 netarch kernel: PM: Syncing filesystems ... done.
    Oct 24 20:34:40 netarch kernel: PM: Preparing system for mem sleep
    Oct 24 20:34:40 netarch kernel: Freezing user space processes ... (elapsed 0.01 seconds) done.
    Oct 24 20:34:40 netarch kernel: Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
    Oct 24 20:34:40 netarch kernel: PM: Entering mem sleep
    Oct 24 20:34:40 netarch kernel: Suspending console(s) (use no_console_suspend to debug)
    Oct 24 20:34:40 netarch kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
    Oct 24 20:34:40 netarch kernel: sd 0:0:0:0: [sda] Stopping disk
    Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: PCI INT A disabled
    Oct 24 20:34:40 netarch kernel: ehci_hcd 0000:00:1d.7: PCI INT A disabled
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.3: PCI INT D disabled
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.2: PCI INT C disabled
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
    Oct 24 20:34:40 netarch kernel: tg3 0000:05:00.0: PME# enabled
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
    Oct 24 20:34:40 netarch kernel: HDA Intel 0000:00:1b.0: PCI INT A disabled
    Oct 24 20:34:40 netarch kernel: ACPI handle has no context!
    Oct 24 20:34:40 netarch kernel: PM: suspend of devices complete after 429.517 msecs
    Oct 24 20:34:40 netarch kernel: PM: late suspend of devices complete after 13.649 msecs
    Oct 24 20:34:40 netarch kernel: ACPI: Preparing to enter system sleep state S3
    Oct 24 20:34:40 netarch kernel: PM: Saving platform NVS memory
    Oct 24 20:34:40 netarch kernel: Disabling non-boot CPUs ...
    Oct 24 20:34:40 netarch kernel: CPU 1 is now offline
    Oct 24 20:34:40 netarch kernel: SMP alternatives: switching to UP code
    Oct 24 20:34:40 netarch kernel: Extended CMOS year: 2000
    Oct 24 20:34:40 netarch kernel: Back to C!
    Oct 24 20:34:40 netarch kernel: PM: Restoring platform NVS memory
    Oct 24 20:34:40 netarch kernel: CPU0: Thermal monitoring handled by SMI
    Oct 24 20:34:40 netarch kernel: Extended CMOS year: 2000
    Oct 24 20:34:40 netarch kernel: Enabling non-boot CPUs ...
    Oct 24 20:34:40 netarch kernel: SMP alternatives: switching to SMP code
    Oct 24 20:34:40 netarch kernel: Booting Node 0 Processor 1 APIC 0x1
    Oct 24 20:34:40 netarch kernel: Initializing CPU#1
    Oct 24 20:34:40 netarch kernel: CPU1 is up
    Oct 24 20:34:40 netarch kernel: ACPI: Waking up from system sleep state S3
    Oct 24 20:34:40 netarch kernel: ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20100428/evregion-474)
    Oct 24 20:34:40 netarch kernel: ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.DSLD] (Node f7025600), AE_TIME
    Oct 24 20:34:40 netarch kernel: ACPI Error (psparse-0537): Method parse/execution failed [\_WAK] (Node f7024768), AE_TIME
    Oct 24 20:34:40 netarch kernel: ACPI Exception: AE_TIME, During Method _WAK (20100428/hwsleep-601)
    Oct 24 20:34:40 netarch kernel: i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
    Oct 24 20:34:40 netarch kernel: HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
    Oct 24 20:34:40 netarch kernel: HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100102)
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010b)
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x80118001)
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf010f010)
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020)
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40207)
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x80318021)
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf020f020)
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030)
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
    Oct 24 20:34:40 netarch kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
    Oct 24 20:34:40 netarch kernel: pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
    Oct 24 20:34:40 netarch kernel: pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
    Oct 24 20:34:40 netarch kernel: ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a)
    Oct 24 20:34:40 netarch kernel: ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
    Oct 24 20:34:40 netarch kernel: tg3 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
    Oct 24 20:34:40 netarch kernel: tg3 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x40100506)
    Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
    Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0200004)
    Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
    Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106)
    Oct 24 20:34:40 netarch kernel: PM: early resume of devices complete after 2.675 msecs
    Oct 24 20:34:40 netarch kernel: i915 0000:00:02.0: setting latency timer to 64
    Oct 24 20:34:40 netarch kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    Oct 24 20:34:40 netarch kernel: HDA Intel 0000:00:1b.0: setting latency timer to 64
    Oct 24 20:34:40 netarch kernel: HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
    Oct 24 20:34:40 netarch kernel: usb usb2: root hub lost power or was reset
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
    Oct 24 20:34:40 netarch kernel: usb usb3: root hub lost power or was reset
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
    Oct 24 20:34:40 netarch kernel: usb usb4: root hub lost power or was reset
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.3: setting latency timer to 64
    Oct 24 20:34:40 netarch kernel: usb usb5: root hub lost power or was reset
    Oct 24 20:34:40 netarch kernel: ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Oct 24 20:34:40 netarch kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
    Oct 24 20:34:40 netarch kernel: pci 0000:00:1e.0: setting latency timer to 64
    Oct 24 20:34:40 netarch kernel: ahci 0000:00:1f.2: setting latency timer to 64
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
    Oct 24 20:34:40 netarch kernel: tg3 0000:05:00.0: PME# disabled
    Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: setting latency timer to 64
    Oct 24 20:34:40 netarch kernel: sd 0:0:0:0: [sda] Starting disk
    Oct 24 20:34:40 netarch kernel: ata2: SATA link down (SStatus 0 SControl 300)
    Oct 24 20:34:40 netarch kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Oct 24 20:34:40 netarch kernel: usb 3-2: reset full speed USB device using uhci_hcd and address 3
    Oct 24 20:34:40 netarch kernel: atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    Oct 24 20:34:40 netarch kernel: atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    Oct 24 20:34:40 netarch kernel: btusb 3-2:1.0: no reset_resume for driver btusb?
    Oct 24 20:34:40 netarch kernel: btusb 3-2:1.1: no reset_resume for driver btusb?
    Oct 24 20:34:40 netarch kernel: usb 1-8: reset high speed USB device using ehci_hcd and address 4
    Oct 24 20:34:40 netarch kernel: ata1.00: configured for UDMA/100
    Oct 24 20:34:40 netarch kernel: atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    Oct 24 20:34:40 netarch kernel: atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    Oct 24 20:34:40 netarch kernel: usb 3-1: reset full speed USB device using uhci_hcd and address 2
    Oct 24 20:34:40 netarch kernel: atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    Oct 24 20:34:40 netarch kernel: atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    Oct 24 20:34:40 netarch kernel: PM: resume of devices complete after 996.313 msecs
    Oct 24 20:34:40 netarch kernel: PM: Finishing wakeup.
    Oct 24 20:34:40 netarch kernel: Restarting tasks ...
    Oct 24 20:34:40 netarch kernel: atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    Oct 24 20:34:40 netarch kernel: atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    Oct 24 20:34:40 netarch kernel: done.
    Oct 24 20:34:40 netarch kernel: video LNXVIDEO:00: Restoring backlight state
    Oct 24 20:34:40 netarch kernel: atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    Oct 24 20:34:40 netarch kernel: atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    Oct 24 20:34:40 netarch kernel: atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    Oct 24 20:34:40 netarch kernel: atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    Oct 24 20:34:40 netarch kernel: tg3 0000:05:00.0: eth0: Link is down
    Oct 24 20:34:41 netarch kernel: tg3 0000:05:00.0: eth0: Link is down
    Oct 24 20:34:43 netarch kernel: ata1.00: configured for UDMA/100
    Oct 24 20:34:43 netarch kernel: ata1: EH complete
    Oct 24 20:34:44 netarch kernel: EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
    dmesg:
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.35-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Sep 29 07:17:20 UTC 2010
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
    BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
    BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
    BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007f5d0000 (usable)
    BIOS-e820: 000000007f5d0000 - 000000007f5e0000 (ACPI data)
    BIOS-e820: 000000007f5e0000 - 000000007f5e3000 (ACPI NVS)
    BIOS-e820: 000000007f5e3000 - 0000000080000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    DMI 2.5 present.
    e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
    e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    last_pfn = 0x7f5d0 max_arch_pfn = 0x100000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-D3FFF write-protect
    D4000-DFFFF uncachable
    E0000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000 mask 080000000 write-back
    1 base 07F600000 mask 0FFE00000 uncachable
    2 base 07F800000 mask 0FF800000 uncachable
    3 disabled
    4 disabled
    5 disabled
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
    Scanning 1 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000001000 (reserved)
    modified: 0000000000001000 - 0000000000002000 (usable)
    modified: 0000000000002000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009dc00 (usable)
    modified: 000000000009dc00 - 00000000000a0000 (reserved)
    modified: 00000000000d2000 - 00000000000d4000 (reserved)
    modified: 00000000000dc000 - 00000000000e0000 (reserved)
    modified: 00000000000e4000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 000000007f5d0000 (usable)
    modified: 000000007f5d0000 - 000000007f5e0000 (ACPI data)
    modified: 000000007f5e0000 - 000000007f5e3000 (ACPI NVS)
    modified: 000000007f5e3000 - 0000000080000000 (reserved)
    modified: 00000000e0000000 - 00000000f0000000 (reserved)
    modified: 00000000fec00000 - 00000000fec10000 (reserved)
    modified: 00000000fee00000 - 00000000fee01000 (reserved)
    modified: 00000000ff000000 - 0000000100000000 (reserved)
    initial memory mapped : 0 - 01800000
    found SMP MP-table at [c00f7cb0] f7cb0
    init_memory_mapping: 0000000000000000-00000000377fe000
    0000000000 - 0000400000 page 4k
    0000400000 - 0037400000 page 2M
    0037400000 - 00377fe000 page 4k
    kernel direct mapping tables up to 377fe000 @ 15000-1a000
    RAMDISK: 37e2a000 - 37ff0000
    Allocated new RAMDISK: 00100000 - 002c5f93
    Move RAMDISK from 0000000037e2a000 - 0000000037feff92 to 00100000 - 002c5f92
    ACPI: RSDP 000f7c80 00024 (v04 PTLTD )
    ACPI: XSDT 7f5d72d4 00074 (v01 LENOVO CB-01 06040000 LTP 00000000)
    ACPI: FACP 7f5dfc60 000F4 (v03 LENOVO CB-01 06040000 PTL 00000002)
    ACPI: DSDT 7f5d846a 07782 (v01 LENOVO CB-01 06040000 MSFT 03000000)
    ACPI: FACS 7f5e2fc0 00040
    ACPI: TCPA 7f5dfd54 00032 (v01 Phoeni x 06040000 TL 00000000)
    ACPI: MCFG 7f5dfd86 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
    ACPI: HPET 7f5dfdc2 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
    ACPI: APIC 7f5dfdfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
    ACPI: BOOT 7f5dfe62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    ACPI: SLIC 7f5dfe8a 00176 (v01 LENOVO CB-01 06040000 LTP 00000000)
    ACPI: SSDT 7f5d78ca 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
    ACPI: SSDT 7f5d7824 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
    ACPI: SSDT 7f5d7348 004DC (v02 PmRef CpuPm 00003000 INTL 20050624)
    ACPI: Local APIC address 0xfee00000
    1149MB HIGHMEM available.
    887MB LOWMEM available.
    mapped low ram: 0 - 377fe000
    low ram: 0 - 377fe000
    Zone PFN ranges:
    DMA 0x00000001 -> 0x00001000
    Normal 0x00001000 -> 0x000377fe
    HighMem 0x000377fe -> 0x0007f5d0
    Movable zone start PFN for each node
    early_node_map[3] active PFN ranges
    0: 0x00000001 -> 0x00000002
    0: 0x00000010 -> 0x0000009d
    0: 0x00000100 -> 0x0007f5d0
    On node 0 totalpages: 521566
    free_area_init_node: node 0, pgdat c1418ac0, node_mem_map c157b020
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3950 pages, LIFO batch:0
    Normal zone: 1744 pages used for memmap
    Normal zone: 221486 pages, LIFO batch:31
    HighMem zone: 2300 pages used for memmap
    HighMem zone: 292054 pages, LIFO batch:31
    Using APIC driver default
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0xffffffff base: 0xfed00000
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 40
    early_res array is doubled to 64 at [16000 - 167ff]
    PM: Registered nosave memory: 0000000000002000 - 0000000000010000
    PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
    PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
    PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
    PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
    PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    PERCPU: Embedded 14 pages/cpu @c2800000 s34880 r0 d22464 u2097152
    pcpu-alloc: s34880 r0 d22464 u2097152 alloc=1*4194304
    pcpu-alloc: [0] 0 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517490
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/sda5
    PID hash table entries: 4096 (order: 2, 16384 bytes)
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    allocated 10433580 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Subtract (53 early reservations)
    #1 [0000001000 - 0000002000] EX TRAMPOLINE
    #2 [0001000000 - 0001572184] TEXT DATA BSS
    #3 [0001573000 - 000157921c] BRK
    #4 [00000f7cc0 - 0000100000] BIOS reserved
    #5 [00000f7cb0 - 00000f7cc0] MP-table mpf
    #6 [000009dc00 - 000009e071] BIOS reserved
    #7 [000009e199 - 00000f7cb0] BIOS reserved
    #8 [000009e071 - 000009e199] MP-table mpc
    #9 [0000010000 - 0000011000] TRAMPOLINE
    #10 [0000011000 - 0000015000] ACPI WAKEUP
    #11 [0000015000 - 0000016000] PGTABLE
    #12 [0000100000 - 00002c6000] NEW RAMDISK
    #13 [000157a000 - 000157b000] BOOTMEM
    #14 [000157b000 - 000256b000] BOOTMEM
    #15 [00015721c0 - 00015721c4] BOOTMEM
    #16 [0001572200 - 00015722c0] BOOTMEM
    #17 [00015722c0 - 0001572314] BOOTMEM
    #18 [000256b000 - 000256e000] BOOTMEM
    #19 [0001572340 - 00015723ac] BOOTMEM
    #20 [000256e000 - 0002574000] BOOTMEM
    #21 [00015723c0 - 00015723e5] BOOTMEM
    #22 [0001572400 - 0001572427] BOOTMEM
    #23 [0001572440 - 0001572600] BOOTMEM
    #24 [0001572600 - 0001572640] BOOTMEM
    #25 [0001572640 - 0001572680] BOOTMEM
    #26 [0001572680 - 00015726c0] BOOTMEM
    #27 [00015726c0 - 0001572700] BOOTMEM
    #28 [0001572700 - 0001572740] BOOTMEM
    #29 [0001572740 - 0001572780] BOOTMEM
    #30 [0001572780 - 00015727c0] BOOTMEM
    #31 [00015727c0 - 0001572800] BOOTMEM
    #32 [0001572800 - 0001572840] BOOTMEM
    #33 [0001572840 - 0001572880] BOOTMEM
    #34 [0001572880 - 00015728c0] BOOTMEM
    #35 [00015728c0 - 0001572900] BOOTMEM
    #36 [0001572900 - 0001572940] BOOTMEM
    #37 [0001572940 - 0001572950] BOOTMEM
    #38 [0001572980 - 0001572990] BOOTMEM
    #39 [00015729c0 - 00015729ea] BOOTMEM
    #40 [0001572a00 - 0001572a2a] BOOTMEM
    #41 [0002800000 - 000280e000] BOOTMEM
    #42 [0002a00000 - 0002a0e000] BOOTMEM
    #43 [0001572a40 - 0001572a44] BOOTMEM
    #44 [0001572a80 - 0001572a84] BOOTMEM
    #45 [0001572ac0 - 0001572ac8] BOOTMEM
    #46 [0001572b00 - 0001572b08] BOOTMEM
    #47 [0001572b40 - 0001572be8] BOOTMEM
    #48 [0001572c00 - 0001572c68] BOOTMEM
    #49 [0002574000 - 0002578000] BOOTMEM
    #50 [0002578000 - 00025f8000] BOOTMEM
    #51 [00025f8000 - 0002638000] BOOTMEM
    #52 [0002a0e000 - 000340142c] BOOTMEM
    Initializing HighMem for node 0 (000377fe:0007f5d0)
    Memory: 2051364k/2086720k available (2986k kernel code, 34900k reserved, 1238k data, 412k init, 1177416k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc1421000 - 0xc1488000 ( 412 kB)
    .data : 0xc12eaacc - 0xc1420340 (1238 kB)
    .text : 0xc1000000 - 0xc12eaacc (2986 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
    NR_IRQS:512
    Extended CMOS year: 2000
    Console: colour VGA+ 80x25
    console [tty0] enabled
    hpet clockevent registered
    Fast TSC calibration using PIT
    Detected 1828.625 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 3658.63 BogoMIPS (lpj=6095416)
    pid_max: default: 32768 minimum: 301
    Security Framework initialized
    Mount-cache hash table entries: 512
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    Initializing cgroup subsys blkio
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 5 MCE banks
    CPU0: Thermal monitoring enabled (TM1)
    using mwait in idle threads.
    Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
    ... version: 3
    ... bit width: 40
    ... generic registers: 2
    ... value mask: 000000ffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 3
    ... event mask: 0000000700000003
    ACPI: Core revision 20100428
    Enabling APIC mode: Flat. Using 1 I/O APICs
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Atom(TM) CPU N470 @ 1.83GHz stepping 0a
    Booting Node 0, Processors #1 Ok.
    Initializing CPU#1
    Brought up 2 CPUs
    Total of 2 processors activated (7317.54 BogoMIPS).
    devtmpfs: initialized
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xe0000000-0xe10fffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xe10fffff] reserved in E820
    PCI: Using MMCONFIG for extended config space
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: SSDT 7f5d8193 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
    ACPI: SSDT 7f5d7b29 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
    ACPI: SSDT 7f5d8396 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
    ACPI: SSDT 7f5d810e 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
    ACPI: No dock devices found.
    PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701f390), AE_ALREADY_EXISTS
    ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
    ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xf7ffffff]
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xfdff]
    pci 0000:00:02.0: reg 10: [mem 0xf0300000-0xf037ffff]
    pci 0000:00:02.0: reg 14: [io 0x18e8-0x18ef]
    pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
    pci 0000:00:02.0: reg 1c: [mem 0xf0000000-0xf00fffff]
    pci 0000:00:02.1: reg 10: [mem 0xf0380000-0xf03fffff]
    pci 0000:00:1b.0: reg 10: [mem 0xf0400000-0xf0403fff 64bit]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
    pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
    pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
    pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
    pci 0000:00:1d.7: reg 10: [mem 0xf0604000-0xf06043ff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.2: reg 10: [io 0x18e0-0x18e7]
    pci 0000:00:1f.2: reg 14: [io 0x18d4-0x18d7]
    pci 0000:00:1f.2: reg 18: [io 0x18d8-0x18df]
    pci 0000:00:1f.2: reg 1c: [io 0x18d0-0x18d3]
    pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18cf]
    pci 0000:00:1f.2: reg 24: [mem 0xf0604400-0xf06047ff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf]
    pci 0000:05:00.0: reg 10: [mem 0xf0100000-0xf010ffff 64bit]
    pci 0000:05:00.0: PME# supported from D3hot D3cold
    pci 0000:05:00.0: PME# disabled
    pci 0000:00:1c.0: PCI bridge to [bus 05-05]
    pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
    pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:07:00.0: reg 10: [mem 0xf0200000-0xf0203fff 64bit]
    pci 0000:07:00.0: supports D1 D2
    pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
    pci 0000:07:00.0: PME# disabled
    pci 0000:00:1c.1: PCI bridge to [bus 07-07]
    pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf02fffff]
    pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:1e.0: PCI bridge to [bus 11-11] (subtractive decode)
    pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x80000000-0xf7ffffff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff] (subtractive decode)
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701f390), AE_ALREADY_EXISTS
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    HEST: Table is not found!
    vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    reserve RAM buffer: 0000000000002000 - 000000000000ffff
    reserve RAM buffer: 000000000009dc00 - 000000000009ffff
    reserve RAM buffer: 000000007f5d0000 - 000000007fffffff
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    Switching to clocksource tsc
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:01: [io 0x0800-0x080f] has been reserved
    system 00:01: [io 0x1000-0x107f] has been reserved
    system 00:01: [io 0x1180-0x11bf] has been reserved
    system 00:01: [io 0x04d0-0x04d1] has been reserved
    system 00:01: [io 0xfe00] has been reserved
    system 00:01: [io 0x0700-0x070f] has been reserved
    system 00:01: [io 0x164e-0x174c] has been reserved
    system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
    system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
    system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
    pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
    pci 0000:00:1c.1: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
    pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
    pci 0000:00:1c.0: PCI bridge to [bus 05-05]
    pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
    pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
    pci 0000:00:1c.1: PCI bridge to [bus 07-07]
    pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf02fffff]
    pci 0000:00:1c.1: bridge window [mem 0x80200000-0x803fffff 64bit pref]
    pci 0000:00:1e.0: PCI bridge to [bus 11-11]
    pci 0000:00:1e.0: bridge window [io disabled]
    pci 0000:00:1e.0: bridge window [mem disabled]
    pci 0000:00:1e.0: bridge window [mem pref disabled]
    pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: enabling device (0000 -> 0003)
    pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:00: resource 6 [mem 0x000d4000-0x000d7fff]
    pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff]
    pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff]
    pci_bus 0000:00: resource 9 [mem 0x80000000-0xf7ffffff]
    pci_bus 0000:00: resource 10 [io 0x0d00-0xfdff]
    pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
    pci_bus 0000:05: resource 1 [mem 0xf0100000-0xf01fffff]
    pci_bus 0000:05: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
    pci_bus 0000:07: resource 0 [io 0x3000-0x3fff]
    pci_bus 0000:07: resource 1 [mem 0xf0200000-0xf02fffff]
    pci_bus 0000:07: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
    pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:11: resource 6 [mem 0x000d4000-0x000d7fff]
    pci_bus 0000:11: resource 7 [mem 0x000d8000-0x000dbfff]
    pci_bus 0000:11: resource 8 [mem 0x000e0000-0x000e3fff]
    pci_bus 0000:11: resource 9 [mem 0x80000000-0xf7ffffff]
    pci_bus 0000:11: resource 10 [io 0x0d00-0xfdff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    UDP hash table entries: 512 (order: 2, 16384 bytes)
    UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    NET: Registered protocol family 1
    pci 0000:00:02.0: Boot video device
    PCI: CLS 32 bytes, default 64
    Unpacking initramfs...
    Freeing initrd memory: 1816k freed
    Simple Boot Flag at 0x36 set to 0x1
    apm: BIOS not found.
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1287944823.419:1): initialized
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1710
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pcieport 0000:00:1c.0: setting latency timer to 64
    pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    pcieport 0000:00:1c.1: setting latency timer to 64
    pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    ERST: Table is not found!
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    i8042.c: Detected active multiplexing controller, rev 1.1.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    PM: Resume from disk failed.
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 412k freed
    udev[38]: starting version 162
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    SCSI subsystem initialized
    atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    libata version 3.00 loaded.
    ahci 0000:00:1f.2: version 3.0
    ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
    ahci: SSS flag set, parallel bus scan disabled
    ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part
    ahci 0000:00:1f.2: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    ata1: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604500 irq 42
    ata2: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604580 irq 42
    ata3: DUMMY
    ata4: DUMMY
    atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ATA-8: ST9250315AS, 0010LVM1, max UDMA/100
    ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata1.00: configured for UDMA/100
    scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0010 PQ: 0 ANSI: 5
    ata2: SATA link down (SStatus 0 SControl 300)
    sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4 sda5
    sd 0:0:0:0: [sda] Attached SCSI disk
    PM: Marking nosave pages: 0000000000002000 - 0000000000010000
    PM: Marking nosave pages: 000000000009d000 - 0000000000100000
    PM: Basic memory bitmaps created
    PM: Basic memory bitmaps freed
    EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    rtc_cmos 00:05: RTC can wake from S4
    rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    udev[734]: starting version 162
    ACPI: acpi_idle registered with cpuidle
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    Marking TSC unstable due to TSC halts in idle
    Switching to clocksource hpet
    input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input1
    ACPI: Power Button [PWRB]
    input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
    coretemp coretemp.0: Unable to read TjMax from CPU.
    coretemp coretemp.0: Using relative temperature scale!
    ACPI: Lid Switch [LID]
    ------------[ cut here ]------------
    WARNING: at fs/proc/generic.c:583 proc_register+0xf8/0x1e0()
    Hardware name: 20040M18
    proc_dir_entry 'power/PWRB' already registered
    Modules linked in: coretemp button(+) serio_raw acpi_cpufreq freq_table processor mperf rtc_cmos rtc_core rtc_lib ext4 mbcache jbd2 crc16 sd_mod ahci libahci libata scsi_mod
    Pid: 1097, comm: modprobe Not tainted 2.6.35-ARCH #1
    Call Trace:
    [<c10439bd>] warn_slowpath_common+0x6d/0xa0
    [<c113e648>] ? proc_register+0xf8/0x1e0
    [<c113e648>] ? proc_register+0xf8/0x1e0
    [<c1043a6e>] warn_slowpath_fmt+0x2e/0x30
    [<c113e648>] proc_register+0xf8/0x1e0
    [<c113eca3>] proc_mkdir_mode+0x33/0x50
    [<c113eccf>] proc_mkdir+0xf/0x20
    [<f82af453>] acpi_button_add+0x21b/0x387 [button]
    [<c11cc665>] acpi_device_probe+0x3a/0xf4
    [<c121eae7>] driver_probe_device+0x77/0x180
    [<c121ec69>] __driver_attach+0x79/0x80
    [<c121dcb3>] bus_for_each_dev+0x43/0x70
    [<c121e839>] driver_attach+0x19/0x20
    [<c121ebf0>] ? __driver_attach+0x0/0x80
    [<c121e3ed>] bus_add_driver+0xbd/0x2e0
    [<c11cc59b>] ? acpi_device_remove+0x0/0x90
    [<c121ee65>] driver_register+0x65/0x110
    [<c113eca3>] ? proc_mkdir_mode+0x33/0x50
    [<c11ccd53>] acpi_bus_register_driver+0x3a/0x3c
    [<f82b202b>] acpi_button_init+0x2b/0x4a [button]
    [<c100120d>] do_one_initcall+0x2d/0x190
    [<f82b2000>] ? acpi_button_init+0x0/0x4a [button]
    [<c107892b>] sys_init_module+0x9b/0x1e0
    [<c10f4f8f>] ? sys_close+0x6f/0xc0
    [<c100379f>] sysenter_do_call+0x12/0x28
    ---[ end trace 475801f928d07a3d ]---
    input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:01/input/input3
    ACPI: Power Button [PWRB]
    input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
    ACPI: Sleep Button [SLPB]
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    ACPI: Power Button [PWRF]
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [TZ01] (60 C)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    lib80211: common routines for IEEE802.11 drivers
    lib80211_crypt: registered algorithm 'NULL'
    atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    Linux agpgart interface v0.103
    i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ACPI: AC Adapter [ACAD] (on-line)
    wl: module license 'Mixed/Proprietary' taints kernel.
    Disabling lock debugging due to kernel taint
    ACPI: WMI: Mapper loaded
    atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
    agpgart-intel 0000:00:00.0: detected 8188K stolen memory
    agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    tg3.c:v3.110 (April 9, 2010)
    tg3 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    tg3 0000:05:00.0: setting latency timer to 64
    wl 0000:07:00.0: enabling device (0104 -> 0106)
    wl 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    wl 0000:07:00.0: setting latency timer to 64
    ACPI: Battery Slot [BAT1] (battery present)
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1d.7: using broken periodic workaround
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0604000
    tg3 mdio bus: probed
    tg3 0000:05:00.0: eth1: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address c8:0a:a9:3b:be:4d
    tg3 0000:05:00.0: eth1: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=500:01)
    tg3 0000:05:00.0: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
    tg3 0000:05:00.0: eth1: dma_rwctrl[76180000] dma_mask[64-bit]
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1d.3: setting latency timer to 64
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
    lib80211_crypt: registered algorithm 'TKIP'
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    eth0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.60.48.36
    udev[757]: renamed network interface eth1 to eth1-eth0
    udev[756]: renamed network interface eth0 to wlan0
    udev[757]: renamed network interface eth1-eth0 to eth0
    [drm] Initialized drm 1.1.0 20060810
    HDA Intel 0000:00:1b.0: enabling device (0104 -> 0106)
    HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    usb 1-8: new high speed USB device using ehci_hcd and address 4
    i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    i915 0000:00:02.0: setting latency timer to 64
    i915 0000:00:02.0: irq 44 for MSI/MSI-X
    [drm] set up 7M of stolen space
    Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xa40000/0x4a0500
    input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
    usb 3-1: new full speed USB device using uhci_hcd and address 2
    [drm] initialized overlay support
    Linux video capture interface: v2.00
    uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b1a1)
    input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input7
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v0.1.0)
    usb 3-2: new full speed USB device using uhci_hcd and address 3
    usbcore: registered new interface driver hiddev
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    Console: switching to colour frame buffer device 128x37
    fb0: inteldrmfb frame buffer device
    drm: registered panic notifier
    Slow work thread pool: Starting up
    Slow work thread pool: Ready
    ACPI Warning: _BQC returned an invalid level (20100428/video-640)
    acpi device:03: registered as cooling_device2
    input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
    ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    Bluetooth: Core ver 2.15
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: Generic Bluetooth USB driver ver 0.6
    usbcore: registered new interface driver btusb
    input: Cando Corporation Cando 10.1 Multi Touch Panel with Controller as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input9
    cando-touch 0003:2087:0A01.0001: input,hidraw0: USB HID v1.11 Device [Cando Corporation Cando 10.1 Multi Touch Panel with Controller] on usb-0000:00:1d.1-1/input0
    EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
    EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
    Adding 1952764k swap on /dev/sda2. Priority:-1 extents:1 across:1952764k
    tg3 0000:05:00.0: irq 45 for MSI/MSI-X
    tg3 0000:05:00.0: eth0: Link is down
    CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
    tg3 0000:05:00.0: eth0: Link is down
    WARNING! power/level is deprecated; use power/control instead
    CE: hpet increased min_delta_ns to 7500 nsec
    ata1.00: configured for UDMA/100
    ata1: EH complete
    EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
    PM: Syncing filesystems ... done.
    PM: Preparing system for mem sleep
    Freezing user space processes ... (elapsed 0.01 seconds) done.
    Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
    PM: Entering mem sleep
    Suspending console(s) (use no_console_suspend to debug)
    sd 0:0:0:0: [sda] Synchronizing SCSI cache
    sd 0:0:0:0: [sda] Stopping disk
    wl 0000:07:00.0: PCI INT A disabled
    ehci_hcd 0000:00:1d.7: PCI INT A disabled
    uhci_hcd 0000:00:1d.3: PCI INT D disabled
    uhci_hcd 0000:00:1d.2: PCI INT C disabled
    uhci_hcd 0000:00:1d.1: PCI INT B disabled
    uhci_hcd 0000:00:1d.0: PCI INT A disabled
    tg3 0000:05:00.0: PME# enabled
    pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
    HDA Intel 0000:00:1b.0: PCI INT A disabled
    ACPI handle has no context!
    PM: suspend of devices complete after 429.517 msecs
    PM: late suspend of devices complete after 13.649 msecs
    ACPI: Preparing to enter system sleep state S3
    PM: Saving platform NVS memory
    Disabling non-boot CPUs ...
    CPU 1 is now offline
    SMP alternatives: switching to UP code
    Extended CMOS year: 2000
    Back to C!
    PM: Restoring platform NVS memory
    CPU0: Thermal monitoring handled by SMI
    Extended CMOS year: 2000
    Enabling non-boot CPUs ...
    SMP alternatives: switching to SMP code
    Booting Node 0 Processor 1 APIC 0x1
    Initializing CPU#1
    CPU1 is up
    ACPI: Waking up from system sleep state S3
    ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20100428/evregion-474)
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.DSLD] (Node f7025600), AE_TIME
    ACPI Error (psparse-0537): Method parse/execution failed [\_WAK] (Node f7024768), AE_TIME
    ACPI Exception: AE_TIME, During Method _WAK (20100428/hwsleep-601)
    i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
    HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
    HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100102)
    pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010b)
    pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x80118001)
    pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf010f010)
    pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020)
    pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
    pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40207)
    pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x80318021)
    pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf020f020)
    pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030)
    pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
    pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
    uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
    uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
    uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
    ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
    pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
    pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
    ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a)
    ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
    tg3 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
    tg3 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x40100506)
    wl 0000:07:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
    wl 0000:07:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0200004)
    wl 0000:07:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
    wl 0000:07:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106)
    PM: early resume of devices complete after 2.675 msecs
    i915 0000:00:02.0: setting latency timer to 64
    HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    usb usb2: root hub lost power or was reset
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    usb usb3: root hub lost power or was reset
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    usb usb4: root hub lost power or was reset
    uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1d.3: setting latency timer to 64
    usb usb5: root hub lost power or was reset
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    ahci 0000:00:1f.2: setting latency timer to 64
    pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
    tg3 0000:05:00.0: PME# disabled
    wl 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    wl 0000:07:00.0: setting latency timer to 64
    sd 0:0:0:0: [sda] Starting disk
    ata2: SATA link down (SStatus 0 SControl 300)
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    usb 3-2: reset full speed USB device using uhci_hcd and address 3
    atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    btusb 3-2:1.0: no reset_resume for driver btusb?
    btusb 3-2:1.1: no reset_resume for driver btusb?
    usb 1-8: reset high speed USB device using ehci_hcd and address 4
    ata1.00: configured for UDMA/100
    atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    usb 3-1: reset full speed USB device using uhci_hcd and address 2
    atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    PM: resume of devices complete after 996.313 msecs
    PM: Finishing wakeup.
    Restarting tasks ...
    atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    done

    korpenkraxar wrote:
    Try this with a kernel 3.X version:
    hpet=disable highres=off nohz=off
    I have been trying to resolve the issue of suspend failing to resume on me Lenovo s10-3 (not the touch screen) for what seems an aeon.
    A profound thank you to you all.
    hpet=disable highres=off nohz=off
    Works!
    I now have no indication lights showing when the machine is suspended? But finally I can close the lid and reopen to resume - fantastic, this machine may finally see some more use.
    I am running Linux Mint Debian Edition (LMDE) running Gnome 3 with 3 series kernels (presently liquorix 3.4.0-4.dmz.1-liquorix-686)

  • How can I install Windows XP on my Lenovo IdeaPad S10-2 with all partitions deleted?

    Lenovo Masters:
    Good day to you all.
    I would like to ask how can I install WinXP in my S10 (no DVD drive)?  First, I want to share that I committed the mistake of using it without any anti-virus software installed.  As a result, it bugged down.  Now in my attempt to reformat it and make it as fresh as day one, I followed the steps on how to make a bootable USB drive.  I was not aware that this unit is only compatible with WinXP (I tried to upgrade to Win7).  And in the process, I deleted both partitions of the HDD.. Now I'm receiving the message "windows was not able to detect a hard drive.. blah.. blah.." dead end for me..
    Can anyone grant me his/her generosity and enlighten me on what to do? Badly need help.. Thanks! 

    you should format the partitions, i think, you haven't done it so, windows can't detect any harddisk installed or your harddisk is dead.
    try to format the disk by using windows installation ( usb ) and try to install again.
    also, check if you see your hdd under bios ( press f2 to load bios, then check bios order )
    ordering recovery discs won't help you due to you don't have any dvd-rom. i suggest you to call lenovo support line and ship your laptop back to service to reset your harddisk to its default.
    ( lenovo may charge you )

  • Lenovo IdeaPad S10-2 3g manager doesn't have a options for "UMTS only" like other 3G modem

    Hi,
    Problem: If you receive more signals 2G, 3G and 2G signal is stronger like 3G, then modem always use 2G signal for connection. But I don't like it. I want to use 3G signal, but I must all times manualy select 3G from list and this is very disturbing.
    Is there maybe some solution for this problem?
    Brane

    It might be the same GOBI model but different Vendor ID and Product ID. I've personally seen the VID/PID of the Ericsson and Huawei modems posted in the other thread so it's safe to say that they will work with the S10-3T. However, finding where to buy those exact modems can be a problem. I would guess it will only be available at the Lenovo site soon.

  • HELP! Problem after updating BIOS of my Lenovo ideapad S10-3S

    I'm hoping somebody will help me out of this nightmare. Cause i'm searching and searching across the net for an answer for this the whole day and i didn't find any accurate solutions for this.
    Well to start, i just updated my laptop's BIOS two days ago because i just saw on lenovo's website that there is an update file for the BIOS and I rapidly DL it and installed as per instruction, it was running fine after that but i just noticed that the system start up and even shutdown takes centuries to finish. Then i turned it on sleep having the screen facedown to the keyboard, and noticeably the 4 indicator lights are still lighted up for approximately 5mins before the laptop totally turned to sleep mode. Then I turned it on at the evening and voila! It is not booting up to the log in screen, it just gives me a background wallpaper for the log in screen without the avatar box and password in put box. After the BIOS screen loads, it offers me two options:
    (1) Launch Startup Repair [recommended as it says]
    (2) Start windows normally
    I tried both but still having the same result. And one option that i tried is to reformat the laptop instead because onekey recovery is also not a dependable solution. But lo and behold!!! It also stuck into a part where it says "starting up the setup".
    I really don't know what to do now!!! Please Lenovo team help me! I'm kinda smash the screen here! Its just that BIOS update is the Major update in my laptop after 4yrs of purchase. Help!

    Hi buddy,
    This stop code means you are using a wrong SATA controller driver. For XP installation you have to integrate the SATA driver before you can install XP. There are a lot of threads about this problem here in forum.
    For Intel chipset you have to download Intel Storage Manager from official Toshiba website and follow the instructions here to reinstall Windows with correct SATA drivers:
    http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm
    Alternative follow the instructions posted by peterk_1. Setting IDE mode instead AHCI in BIOS will also help :)

  • How to change win 7 k to english in my ideapad s10-3

    recently i bought a lenovo ideapad s10-3 netbook from korea( but  i am not korean originally ), it is all good but there is created one problem for me that while i first opened it, at that time i all changed its language and place to us english and us, but it didn't appear in english when it went inside it came in korean language which  i don't understand  , so plzzzz help me
    1. how to change it in english version?
    2. is it possible to change without going to its service centre?
    3. should i pay money for it?
    4. can i do it directly from internet?
    5. how long does it take?
    plz reply me as soon as possible , i'm unable to use my ideapad s10-3 netbook until you help me

    unless you have the ultimate and enterprise version of the win 7, then you can't change the menu system language,  without having to purchase an English edition of the win 7 OS. 
    You will have to purchase a separate retail copy of Win 7 to install on your ideapad. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Ideapad S10-3 black screen, won't boot

    Hello, every body.
    I have a lenovo ideapad s10-3. Right now it is black screen and won't boot, but power works.
    I disassembled it, and just left CPU, graphics card, and RAM. Power works, and fan starts rotating and stops. I leave it running, i can feel CPU and Graphics Card hot.
    Before this problem(black screen and won't boot) happened. sometime it can boot, somtimes it does not and black screen. Sometime after trying several time (force ti shutdown, restart power on), it boots and goes to be normal. Right now it won't work anymore.
    At the left-bottom of laptop, there are 4 flash lights, the former 3 are working fine, and the last (4th. there is small arrow (two sides) in the center of cylinder, what does it mean?) does not flash. If it flashes fine, the computer works well, if not, won't work. 
    I clean the RAM fingerpin, won't work. Tried to connect with external screen, won't work. Remove BIOS battery, won't work. I tried another Hard Drive and RAM seperately, it does not work.
    I did try this solution (How to fix Graphics Card in Lenovo R61 ), but it does not work for my computer.
    I can press power button to force the laptop shut down, it looks like the motherboard has no problem
    What is going on my laptop. Please help me of this trouble. Thanks a lot.
    Happy Christmas and New Year.

    Hi,
    1) Yeah, somehow OS X has been messed up enough that it can't finish loading. What else have you done with it lately? When I went through my machine fiddling with Quicktime in the system Library folders, I ended up where you are.
    2) I don't think you can fix it from the OF prompt. I had a daily backup of my drive, and so I was able to boot off of that. You can boot back into OS 9 though, by holding down the Option key after a cold boot's chime.
    4) I'd say it's worth fixing. Beats plunking down $500 or more on a new machine.
    HTH,
    ~FifthWheel

  • Motherboard for IdeaPad S10

    Hi, Looking to buy, motherboard for Lenovo IdeaPad S10. model Motherboard: DA0FL1MB6F0
    Solved!
    Go to Solution.

    http://cgi.ebay.com/Lenovo-IdeaPad-S10-Motherboard-da0fl1mb6f0-31fl1mb00n0-/140465776112?pt=Motherbo...

  • IdeaPad S10-3 broken hinge

    The right plastic hinge of my S10-3 laptop broke off for no reason. I always close my netbook properly and always take good care of it. This netbook has been with me for almost 2 years already. What would happen if I didn't repair my laptop right away? Is there a way to repair it without spending too much, I mean it's just a hinge. I read from other forums that repairing that part could cost approximately $300.
    Solved!
    Go to Solution.

    hi unbeatable.
    Welcome to the Lenovo Forums.
    If you hear squeaky sound when you open your LCD screen or you feel that the left / right hinges are getting loose then I recommend you have it serviced as it can damage the bottom platic if left unrepaired.
    You can get spare here:
    Lenovo Ideapad S10-3 Left and Right Hinge Set
    And you can follow this diassembly guide or this video as a reference. If you're not comfortable opening the laptop, you can have it service at a local computer repair store.
    Note:
    Use ESD protection and be careful in diassembling your PC as it has parts that are easily breakable.
    Hope this helps.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Is this the Right Forum for Ideapad S10?

    Is this the correct forum for the Ideapad S10?  If not, just where would be appropriate?
    Have been waiting to get a Wind, when I saw the announcement on this beauty.  Would like to find out if pre-orders will be available.  Searching Lenovo.com shows absolutely nothing on the S10.  Here's a link to some info:
    http://gizmodo.com/5032618/lenovos-ideapad-s10-ultra+portable-notebook-pc-gets-official-due-in-septe...
    Ordered a Ruby Red Ideapad S10 on 8-19 to join my HP iPAQ 211, 6257c, and dv9000

    Welcome to the forum!  Yes, this is the ideaPad board.
    The ideaPad S10 announcement is at http://www.lenovo.com/news/us/en/2008/08/netbook.html
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Jane
    2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
    I am not a Lenovo Employee.
    I AM one of those crazy ThinkPad zealots!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

  • Where can i find the multimedia touch screen software for ideapad-s10-3t

    i have and ideapad-s10-3t and i had to format it but now im looking for all the software from lenovo that came with it like the multimedia that work with the touchscreen i alredy finde the  directshare veryface verytouth 

    Hi and welcome...
     these drivers S10-3t  available at download...
    some software isnt offered to download...
    regards KalvinKlein
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • IdeaPad S10 w/ 1GB Memory

    Hi. I would order the S10 right now, since I need a new ultraportable laptop for college, which starts next week. But 512MB of memory is kind of limited for me.
    So, I'd like to know when will the S10 with 1GB memory be available for purchase online on lenovo.com.
    I'd appreciate any helpful information.
    Thank you.
    Message Edited by JR_M on 08-21-2008 02:38 AM

    Lenovo Official Announcement
    Executive Summary: October
    Pricing and Availability4
    The IdeaPad S10 netbook PC will be available beginning in early October, and prices start at $399. The IdeaPad S10 netbook will be available through leading retailers, Lenovo business partners and www.lenovo.com. 

  • Fixing IdeaPad S10-3

    Hi Everyone, I am trying to fix a small Ideapad S10-3 laptop for a young girl to use, it has win 7 on, but none of the hotkeys seem to work as I thought they might, it seems to me that there is Lenovo software not installed to drive the laptop functions. Also the wireless card seems to not be working, as the light bottom left is not coming on..
    Any ideas?
    Thanks
    Justine
    Solved!
    Go to Solution.

    you're welcome.
    i'm not deeply familiar with the S-series, but please have a look at the following:
    http://consumerdl.lenovo.cdn20.com/UserFiles/UserGuide/en/User%27s%20guides%20and%20manuals/S10-3/Le...
    are you referring to the items marked 6 and 7 in the picture on page 1? if so, those are defined on page 2 as the OneKey Rescue system button and the Quick Start button, respectively. it qualifies that the buttons operate if the feature has been installed. there are also sections in the pdf that describe the functions in greater detail.
    regards.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • Ideapad S10-3 Webcam Problem with Windows XP

    Hi folks,
    I own a Ideapad S10-3 shipped with Windows 7 Starter.
    Because Windows XP is much faster on this machine, I installed Windows XP Professional SP3.
    After Installation I downloaded all S10-3 Windows XP drivers available at the lenovo site for S10-3.
    No installations problems so far, the webcam was working and recognized as Lenovo EasyCamera
    Vendor ID: 5986 Product ID: 0190 Rev: 1409. Driver Provider is displayed as "Vimicro"
    After a few days using the netbook, one day i started windows and the new hardware found wizard started and recognized a new USB Video device and installed the UVC driver from Windows. This "new" device has Vendor ID: 0ac8 and Product ID: 3450 Rev: 0130. The old webcam with the old IDs isnt shown anymore in the device manager. (only if you set var "devmgr_show_nonpresent_devices=1" and enable "show hidden devices")
    When i try to use the webcam the light beside the webcam turns on, but no picture is displayed. No matter which program i try, the webcam isnt working anymore.
    Because of the different device ID it isnt possible to install the lenovo webcam driver, but basically the webcam should work with the UVC driver provided by windows. I find it totaly strange that the webcam is showing up suddenly with a different device id.
    When windows is running theres an process VM322_STI.exe running, its part of the Webcam driver and gets installed.
    This is the second S10-3 Netbook on which i have this problem, i returned the first one because of this problem.
    Is someone here, who is also using the S10-3 with XP or has an similar problem ?
    EDIT: I read about the firmware update problems/issues with the old S10 models, but theres no Firmware on the S10-3 website i think, so i didn't think that i accidently flashed a wrong firmware to this webcam. I only used the Device manager to install the webcam driver. Or is it possible that the firmware is included in the driver package?
    regards
    RaiHei

    IT's working again... very strange ... the driver on the lenovo site for this webcam seems faulty, i uninstalled it, and after the reboot the old cam with the old device id is back in the device manager ... i now use the uvc driver and NEVER install the lenovo driver again... just because of the driver i returned my first s10-3 .
    Also very interersting: After the cam didnt work in Windows XP anymore, i recovered the original Win7Starter from an complete hdd image (which i made before installing win XP) and in Win7 the cam wasn't working too. Because of that i never thought that it was a driver problem, because the driver and windows xp was deleted when i recovered the original win7.
    so my recommendation: DO NOT install the lenovo driver, let Windows XP use its own UVC driver.

Maybe you are looking for

  • Making the local social media notifications available as feeds in sap C4C

    Hello Experts, we have a requirement of making our local notification centre available on feeds tab on SAP C4C. My approach is to go with a custom BO and bring the data from the Social media site and store it in C4C and display it. Its just a thought

  • Mac Mini crashing once a day.

    Here's the latest report: Interval Since Last Panic Report:  7234617 sec Panics Since Last Report:          10 Anonymous UUID:                    FF591C54-FC9D-4EBB-98E6-45B639D22A95 Thu Mar 29 23:06:27 2012 panic(cpu 0 caller 0x29a3a1): trying to in

  • Connect to the internet to access Siri while watching a video.

    I'm having a problem watching iTunes purchased tv shows on my wifi iPad Mini. At various points, Siri pops up (totally on her own) with a message to access the internet, to connect to Siri. If I touch the screen, it goes away and the film starts. Thi

  • Deleting anchored frames

    Hello all, What happens with a linked list of objects when I use the Delete method on one of these objects ? The FrameMaker Scripting Guide does not say much about this, nor does the FDK reference guide. I have tried the following but it does not wor

  • How to invoke a bean in WLS from a servlet in JWS

              Hi,           I have an application where in i am invoking an EJB in WLS from a servlet in JWS.Could any one give me the correct steps to approach this problem.Till now i was using WLS as webserver itself.can i use the same t3 protocol in m