Lenovo Ideapad s10e Keeps Restarting after Splash Screen

Hey, my Lenovo s10e perpetually restarts after the Lenovo splash screen. The blinking cursor comes up for 5 seconds and then the computer restarts again. F1 for system bios or F8 for safe mode do not work. Taking out battery/AC and holding power button for 40 secs also yields no results.
Computer had been working fine, when inexplicably the virtual memory shot up and the paging file had to be increased. Tried to shut down the computer but it wasn't responding, so I did so manually. I have not been able to get the computer to boot up properly since.
I spoke with Lenovo on the phone and they said it was a motherboard issue, and the computer had to be sent in. Was wondering if anyone had some other possible solutions before I'm forced to ship it out.
All the best,
Andom

Hey thanks for the reply.
Unfortunately, One Key Recovery does not do anything: splash screen and blinking cursor come up before restarting again. I also wouldn't want to do anything that makes me lose my data.
Lenovo support said they would be able to fix it without reformatting HD, so I guess I'll have to go that option...unfortunately, max estimate is $575.

Similar Messages

  • App builder keeps hanging after splash screen images added

    After I upload all my splash screens for SD and HD, I cannot proceed to the next screen.
    There are green checks next to HD and SD, and all looks good.
    I have not uploaded any fonts as there is no HTML in the app.
    I have deleted and re-downloaded the app builder and still get the same behavior.

    The problem was that one of the images had a resolution of 72.09 instead of an even 72. after I changed it it worked. Thanks.

  • Ipod touch 4th gen needed a new screen and sleep/wake switch.  So, I replace them.  I was able to get to settings and do "erase all content and settings".  I am not able to totally shut this device off as it keeps restarting after a few seconds.

    Ipod touch 4th gen needed a new screen and sleep/wake switch.  So, I replace them.  I was able to get to settings and do "erase all content and settings".  I am not able to totally shut this device off as it keeps restarting after a few seconds.  I have used itunes to restore and also recover.  Device will actually shut off and stay shut off if I leave it connected to the computer.  The moment I unplug (3 seconds) the apple logo appears, it boots, unlock screen appears, I can unlock and operate normally, unplugged or not.  Just cant get it to completely shut down unplugged.  Any thoughts?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
      - If still not successful that usually indicates a hardware problem. Maybe you installed a bad component or damaged something during the repair/replacement.
    Apple will not help since you worked on the iPod yourself.

  • Lenovo ideapad S10e Motherboard

    Hi,
    Any body knows from where i can buy a motherboard( system board) for my Lenovo ideapad S10e?

    Hi and welcome...
    with battery ?
    or plugged in ?
    Try the old hint remove powerplug remove battery press start for approximately 30 seconds..
    insert powerplug press powerbutton ...
    insert battery ..
    hope that works
    sincerely KalvinKlein
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • Computer keeps restarting after installing windows 8

    Can you help my computer keeps restarting after I installed Windows 8?  I have the minidump file zipped

    We do need the actual DMP file as it contains the only record of the sequence of events leading up
    to the crash, what drivers were loaded, and what was responsible.
    You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.
    If you are overclocking stop.  (chances are if you dont know if you are, you are not)a
    To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.
    The procedure:
    * Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
    * Zip up the copy.
    * Attach the ZIP archive to your post using the "paperclip" (file attachments) button. (if available on  your site, MS doesnt have this)
     *Please upload them to a file sharing service like Skydrive or"Rapidshare" and put a link to them in your reply.
    Link for how to  upload below.
    http://www.wikihow.com/Use-SkyDrive
    To ensure minidumps are enabled:
    * Go to Start, in the Search Box type: sysdm.cpl, press Enter.
    * Under the Advanced tab, click on the Startup and Recovery Settings... button.
    * Ensure that Automatically restart is unchecked.
    * Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
    * Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
    * OK your way out.
    * Reboot if changes have been made.
    Please also run MSinfo32 and upload the output as well.
    To run MSinfo32 please go to start>run>MSinfo32
    Go to "file" "save" and upload the saved file with the DMPS
    (Instructions for XP, Vista, Win 7, Win 8)
    System specs are often useful so include whatever you know
    Dyami & Wanikiya ...Team ZigZag.

  • Some games to not continue after splash screen.

    I've already asked it on answers.microsoft.com but didn't get any reply. So, thought I would ask here.
    What I've tried:
    App troubleshooter
    sfc /scannow
    Answers in http://superuser.com/questions/562188/windows-8-metro-apps-wont-load
    also, I've tried some technet links but in vain.
    I've installed two games - Sonic Dash and Despicable Me 2:Minion Rush. Both of these games to not work after splash screen and they get minimized.
    I've checked the event log and found this
    Activation of app SegaNetworksInc.56538047DFC80_as33fap47kd3c!App failed with error: The remote procedure call failed. See the Microsoft-Windows-TWinUI/Operational
    log for additional information.
    And full details here
    Faulting application name: Template.exe, version: 2.0.0.0, time stamp: 0x5492b318
    Faulting module name: combase.dll, version: 6.3.9600.17031, time stamp: 0x53086d7c
    Exception code: 0xc000027b
    Fault offset: 0x000fb152
    Faulting process id: 0x1418
    Faulting application start time: 0x01d0227a62078008
    Faulting application path: C:\Program Files\WindowsApps\SegaNetworksInc.56538047DFC80_2.0.0.0_x86__as33fap47kd3c\Template.exe
    Faulting module path: C:\WINDOWS\SYSTEM32\combase.dll
    Report Id: 9fbff746-8e6d-11e4-a383-c0cb38d6092f
    Faulting package full name: SegaNetworksInc.56538047DFC80_2.0.0.0_x86__as33fap47kd3c
    Faulting package-relative application ID: App
    Apparently it has something to do with remote procedure call. When I open the other game, I get same errors as the above, the only thing which has changed being name of the app.
    Graphics shouldn't be a problem since these games have ALREADY run once, but not now, and I have other heavy-graphic games like Asphalt 8 Airborne which still WORKS.
    I've also tried re-installing but in vain, duh. Looking for help badly. I'd appreciate any help.

    Sorry. Those two links too didn't work. I did all that was instructed in them. However I really appreciate your effort in solving my problem.
    I checked the event log in the path which you asked me to and got this
    Activation of the app SegaNetworksInc.56538047DFC80_as33fap47kd3c!App for the Windows.Launch contract failed with error: The remote procedure call failed..
    And a detailed view
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name="Microsoft-Windows-Immersive-Shell" Guid="{315A8872-923E-4EA2-9889-33CD4754BF64}" />
    <EventID>5961</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>5961</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-28T04:44:28.735933800Z" />
    <EventRecordID>71148</EventRecordID>
    <Correlation />
    <Execution ProcessID="1060" ThreadID="5520" />
    <Channel>Microsoft-Windows-TWinUI/Operational</Channel>
    <Computer>Amit</Computer>
    <Security UserID="S-1-5-21-66860032-2800664797-2745505841-1010" />
    </System>
    - <EventData>
    <Data Name="AppId">SegaNetworksInc.56538047DFC80_as33fap47kd3c!App</Data>
    <Data Name="ContractId">Windows.Launch</Data>
    <Data Name="ErrorCode">-2147023170</Data>
    </EventData>
    </Event>
    Can the error log be of some help?

  • Lightroom CC will not open after splash screen. Adobe suggested fixes don't work. Can't find a damn phone number to call them.

    Adobe fixes do not work. Can't find a tech phone number.

    Robert,
    I'm sorry you are having troubles. Did you try both option one and two in this link:
    Lightroom doesn't launch or quits automatically after splash screen
    If those don't work, feel free to go to the contact us page and then click the "Still need help? Contact us." button for support.
    Pattie

  • FIM Sync service keeps restarting after being disabled

    Hi - We are deploying the SharePoint User Profile Store connector and I have followed all the steps here:
    http://technet.microsoft.com/en-us/library/dn511003(v=ws.10).aspx
    However the FIM Sync service keeps enabling and restarting itself - can't see anything in the event logs except a Evt ID: 2001 - Service was started successfully
    What is starting this service? How can I stop so that it remains in the disabled state?
    Thanks
    J

    Hi,
    Based on your description, my understanding is that you want to disable the FIM Sync service, but FIM Sync service keeps restarting after being disabled.
    I suggest you start the FIM Sync service again and stop it, then disable it.
    You shouldn't need to start those services manually - SharePoint will do everything itself when you start the User Profile Sync service in Central Administration.
    Restarted the User Profile Synchronization Service in Central Administration.(Central Administration -> System Settings -> Manage services on server -> User Profile Synchronization Service.)
    Stop the FIM Sync service and then disable it.
    Here are two links, you can use as a reference:
    http://serverfault.com/questions/147738/not-able-to-start-forefront-identity-manager-service
    Best Regards,
    Lisa Chen
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact 
    [email protected]

  • My iPhone 6 keep restarting after I open a few apps!!!!!

    My iPhone 6 keep restarting after I open a few apps!!! Sometimes during a call

    Hi kaiserleung,
    Thank you for using Apple Support Communities.
    Please see the information in the article below on troubleshooting this issue where your iPhone is unexpectedly restarting.
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
    Cheers,
    Alex H.

  • Iphone keep restarting after 60 seconds

    I need help for iphone keep restarting after 60 seconds, when I update ios 5.0.1 (9A405), how to overcome these problems

    Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
    If this does not help, setting it back to factory settings would be the next step:
    Use iTunes to restore your iOS device to factory settings - Apple Support

  • Finder froze, restarted. Now keeps restarting after boot.

    Hi!
    The title pretty says it all.
    Finder froze completly, and I forced a restart. After the restart it keeps restarting AFTER boot. By that I mean after getting into the desktop.
    Any ideas?
    Tried a few things my self, but it just keeps restarting..
    Got a Mac mini, can the macbook somehow boot from that? I just need the data from the harddrive!

    I could not find anything the direction I was going. OK, you can start from your DVD. What happens if you just click install? If you are able to install, then your would be installing Sno over Sno, as if doing an upgrade install, in an attempt to fix your Sno installation. In principle, your files, users, apps, and settings would not be affected. But,before trying this sort of install, you will need to resolve the issue of what sort of backup you have. Most importantly you may have important unbacked up files. If so, then you might be better off going to a data recovery specialist before trying to reinstall Sno over Sno.

  • My iphone 4 keeps restarting after i changed the battery

    my iphone 4 keeps restarting after i changed the battery and its every few minutes please help!

    my iphone 4 keeps restarting after i changed the battery and its every few minutes please help!

  • T400 keeps restarting after being re-imaged with Ghost

    I built an XP image with the recovery disks from Lenovo.
    Now I'm trying to dump this image on to other T400's that are straight out of the box and after the image is done loading the laptop will just keep restarting.
    Please help.
    Configuration:
    - hard drive is set to ACHI (defualt)
    - did a full disk image when dumping down.
    I don't get a flashing cursor or error message the laptop will just restart aftee the Lenovo Screen.

    ashaikh, welcome to the forum,
    how did you create the image? Did you capture the 4 boot blocks using the -IB switch?
    There is a tip, a bit old and you can ignore the part about setting the predesktop area to disabled, but it should hopefully help you.
    Partition does not boot after being restored with Norton Ghost
    The title may also not seem to be 100% relevant. The important part is the -IB switch - See this thread.
    Hope this helps
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • ML keeps restarting after installation! HELP!

    I have installed ML and after the installation, it keeps restarting itself. Sometimes it will make it to the desktop and other times will just restart when at grey screen. I have rebooted to disk utility using CMD+R and verified and repaired permission and it still did not help the problem. Now I have booted in safe mode, and it says my software is 10.8 (ML). The update does not show up in my app store, what is the next step to reinstalling ML or any other ideas

    So under the four options it gives me, pick the reinstall OS X option? Also, could you explain the Archive part in more detail as I have never had to do anything like this before. Thanks

  • Macbook keeps restarting after ram and mountain lion upgrade

    I installed an 8gb ram from OWC to my macbook (late 2008 aluminum body model) and upgraded to mountain lion after having leopard for years. I decided to erase the hard disk completely and upgrade to snow leopard and then download the mountain lion software. I had installed the new 8Gb ram on leopard before any of the two upgrades. Ever since I had the upgrade the computer restarts randomly and takes me to a grey screen saying than an error ocurred. It mostly happens when watching netflix or any other type of streaming video. I tried using chrome and firefox and it only helped for a little bit. I had to take my macbook to my local apple store to get it checked and apparently the ram was not positioned correctly. After they "positioned correctly" the computer worked fine. But now a few hours later I'm back at my apartment and the computer keeps restarting. Please help me with the issue.

    <Deleted>

Maybe you are looking for