Lenovo Ideapad S405 availability in Australia
Hi guys, Just wondering if anyone knows if/when the Ideapad S405 will be available in Australia. It looks like a really nice balance between performance/mobility/price but I can't seem to find any estimated release date. Thanks in advance! :3
Hi
Welcome to the community.
As you need information regarding availability of Ideapad S405, please contact the lenovo pre-sales department and there the available representative will assist you .
Regards,
Sameer
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!
Similar Messages
-
My ideapad s405 is not booting up. I have tried removing battery and disconnecting power cord, holding down power button for 10 seconds and reconnecting just the power cord. This does not work, only a Lenovo name is showing on display, this has been like this for 24+ hours so far without any change.
DW,
I've replied on some of your other threads - we'll try to make further suggestions here, but you may also want to contact service. I think you indicate it just fell out of warranty. We can look into the situation and see what can be done.
So, the system is hung on the Lenovo screen every time you start up correct?
If you press F1 can you get into BIOS?
Can you press F12 to get a boot device list? If so, is the HDD shown? If the boot device list comes up, then maybe the system board is OK and if the HDD is not shown, then perhaps that is the problem. If you can't get the list, then maybe a probably with the system board.
I would also check your USB ports to see if any are broken. On some ThinkPads, if a port was broken and the plastic rectangular piece was broken out of it, the 4 pins left could wind up shorting out which would cause a hung on ThinkPad screen.
Let us know the outcome and perhaps the community can help you figure this out.
Best regards,
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Lenovo ideapad s405 touchpad mouse problem
Hi to all
I bought this laptop a week ago and I installed windows 8 pro edition
I have a problem: when I press a button in the keyboard I can't move the touchpad (so I can't use,for example,games because I can't move the the view of the character)
What can I do? There aren't problems when I push CTRL or ALT or buttons that don't write something.Thankshi Razorbacktrack,
Your issue might be similar to this thread.
If your PC came with a Synaptics Touchpad, can you try to:
1. Go to the Control Panel (large icon view) then > click Mouse > Device Settings tab > Settings
2. Under the Synaptics Settings, go to Pointing > Sensitivity > Palmcheck and set the palm sensitivity to minimum and test the game.
Spoiler (Highlight to read)
If you have an ELAN touchpad, try to:
3. Adjust the PalmTracking option under Additional Tab on the ELAN Smart Pad settings to the minimum (see spoiler)
4.If same problem, press WindowsKey+R then type appwiz.cpl. From the program list, uninstall lenovo pointing device, reboot.the PC and test (you can re-install this later by nagvigating to D:\Drivers\Touchpad).
Spoiler (Highlight to read)
Let me know your findings.
Cheers
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
[concluded] Enabling SLI (Lenovo Ideapad y500 / dual gt 650m)
final edit:
Apparently there is no support for sli on mobile nvidia gpu. Thank you ever so much Nvidia, you willf orever hold a special place in my heart..
I've miracously gotten everything else to work. Only thing left is enabling sli, which I haven't been able to.
As far as I know, I've follow the instruction to the letter, but all I get i a black screen and a log with no particular useful information that I can find:
[ 13.106]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 13.106] X Protocol Version 11, Revision 0
[ 13.106] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 13.106] Current Operating System: Linux zarchbook 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014 x86_64
[ 13.106] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet nomodeset rcutree.rcu_idle_gp_delay=1 loglevel=3
[ 13.106] Build Date: 14 April 2014 08:39:09AM
[ 13.106]
[ 13.106] Current version of pixman: 0.32.4
[ 13.106] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.106] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.107] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 31 17:50:00 2014
[ 13.108] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.108] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13.109] (==) ServerLayout "Layout0"
[ 13.109] (**) |-->Screen "Screen0" (0)
[ 13.109] (**) | |-->Monitor "Monitor0"
[ 13.110] (**) | |-->Device "Device0"
[ 13.110] (**) |-->Input Device "Keyboard0"
[ 13.110] (**) |-->Input Device "Mouse0"
[ 13.110] (**) Option "BlankTime" "0"
[ 13.110] (==) Automatically adding devices
[ 13.110] (==) Automatically enabling devices
[ 13.110] (==) Automatically adding GPU devices
[ 13.112] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 13.112] Entry deleted from font path.
[ 13.113] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 13.113] Entry deleted from font path.
[ 13.113] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 13.114] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 13.114] Entry deleted from font path.
[ 13.114] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 13.114] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 13.114] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.114] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 13.114] (WW) Disabling Keyboard0
[ 13.114] (WW) Disabling Mouse0
[ 13.114] (II) Loader magic: 0x804c80
[ 13.114] (II) Module ABI versions:
[ 13.114] X.Org ANSI C Emulation: 0.4
[ 13.114] X.Org Video Driver: 15.0
[ 13.114] X.Org XInput driver : 20.0
[ 13.114] X.Org Server Extension : 8.0
[ 13.114] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13.114] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 13.117] (--) PCI:*(0:1:0:0) 10de:0fd1:17aa:3972 rev 161, Mem @ 0xb3000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[ 13.117] (--) PCI: (0:2:0:0) 10de:0fd1:17aa:3972 rev 161, Mem @ 0xb2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[ 13.117] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 13.117] Initializing built-in extension Generic Event Extension
[ 13.117] Initializing built-in extension SHAPE
[ 13.117] Initializing built-in extension MIT-SHM
[ 13.117] Initializing built-in extension XInputExtension
[ 13.117] Initializing built-in extension XTEST
[ 13.117] Initializing built-in extension BIG-REQUESTS
[ 13.117] Initializing built-in extension SYNC
[ 13.117] Initializing built-in extension XKEYBOARD
[ 13.118] Initializing built-in extension XC-MISC
[ 13.118] Initializing built-in extension SECURITY
[ 13.118] Initializing built-in extension XINERAMA
[ 13.118] Initializing built-in extension XFIXES
[ 13.118] Initializing built-in extension RENDER
[ 13.118] Initializing built-in extension RANDR
[ 13.118] Initializing built-in extension COMPOSITE
[ 13.118] Initializing built-in extension DAMAGE
[ 13.118] Initializing built-in extension MIT-SCREEN-SAVER
[ 13.118] Initializing built-in extension DOUBLE-BUFFER
[ 13.118] Initializing built-in extension RECORD
[ 13.118] Initializing built-in extension DPMS
[ 13.118] Initializing built-in extension Present
[ 13.118] Initializing built-in extension DRI3
[ 13.118] Initializing built-in extension X-Resource
[ 13.118] Initializing built-in extension XVideo
[ 13.118] Initializing built-in extension XVideo-MotionCompensation
[ 13.118] Initializing built-in extension XFree86-VidModeExtension
[ 13.118] Initializing built-in extension XFree86-DGA
[ 13.119] Initializing built-in extension XFree86-DRI
[ 13.119] Initializing built-in extension DRI2
[ 13.119] (II) LoadModule: "glx"
[ 13.121] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.212] (II) Module glx: vendor="NVIDIA Corporation"
[ 13.212] compiled for 4.0.2, module version = 1.0.0
[ 13.212] Module class: X.Org Server Extension
[ 13.212] (II) NVIDIA GLX Module 337.19 Tue Apr 29 19:48:33 PDT 2014
[ 13.212] Loading extension GLX
[ 13.212] (II) LoadModule: "nvidia"
[ 13.212] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 13.219] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 13.219] compiled for 4.0.2, module version = 1.0.0
[ 13.219] Module class: X.Org Video Driver
[ 13.220] (II) NVIDIA dlloader X Driver 337.19 Tue Apr 29 19:22:36 PDT 2014
[ 13.220] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 13.220] (++) using VT number 1
[ 13.221] (II) Loading sub module "fb"
[ 13.221] (II) LoadModule: "fb"
[ 13.221] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 13.222] (II) Module fb: vendor="X.Org Foundation"
[ 13.222] compiled for 1.15.1, module version = 1.0.0
[ 13.222] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.222] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 13.222] (II) Loading sub module "wfb"
[ 13.222] (II) LoadModule: "wfb"
[ 13.222] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 13.223] (II) Module wfb: vendor="X.Org Foundation"
[ 13.223] compiled for 1.15.1, module version = 1.0.0
[ 13.223] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.223] (II) Loading sub module "ramdac"
[ 13.224] (II) LoadModule: "ramdac"
[ 13.224] (II) Module "ramdac" already built-in
[ 13.237] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 13.237] (==) NVIDIA(0): RGB weight 888
[ 13.237] (==) NVIDIA(0): Default visual is TrueColor
[ 13.237] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 13.238] (**) NVIDIA(0): Option "NoLogo" "True"
[ 13.238] (**) NVIDIA(0): Option "SLI" "Auto"
[ 13.238] (**) NVIDIA(0): Option "ModeValidation" "AllowNonEdidModes"
[ 13.238] (**) NVIDIA(0): NVIDIA SLI auto-select rendering option.
[ 13.238] (**) NVIDIA(0): Option "UseEDID" "FALSE"
[ 13.238] (**) NVIDIA(0): Option "MetaModes" "1920x1080_60 +0+0 { ForceFullCompositionPipeline = On }"
[ 13.238] (**) NVIDIA(0): Enabling 2D acceleration
[ 13.238] (**) NVIDIA(0): Ignoring EDIDs
[ 17.131] (WW) NVIDIA(GPU-0): Failed to initialize the SLI configuration for the NVIDIA
[ 17.131] (WW) NVIDIA(GPU-0): graphics device PCI:1:0:0. Please see Chapter 29:
[ 17.131] (WW) NVIDIA(GPU-0): Configuring SLI and Multi-GPU FrameRendering in the README
[ 17.131] (WW) NVIDIA(GPU-0): for troubleshooting suggestions.
In the end, all that I can learn from this is that stuff don't work, not why or how to fix it. A bit annoying to be blunt.
I've been googling around for answers, but the closest thing I've come to an answer, and I do hope it isn't true, is that sli om mobile nvidia gpu is not supported under linux. I've been unable to confirm this.
I do hope you can help.
Best regards.
edit:
Just for kicks, here's my xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 337.19 (buildmeister@swio-display-x64-rhel04-03) Tue Apr 29 20:34:50 PDT 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "BlankTime" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 66.5 - 66.5
VertRefresh 59.9
ModeLine "1920x1080" 138.500 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync
Option "DPMS"
EndSection
Section "Device"
BusID "PCI:1:0:0"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "1920x1080_60 +0+0 { ForceFullCompositionPipeline = On }"
Option "NoLogo" "True"
Option "ModeValidation" "AllowNonEdidModes"
Option "UseEDID" "FALSE"
Option "SLI" "Auto"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Ya, it's a mess, but nothing particular wrong with is that I can see.
edit2:
Just in case some information is lagging, here is the nvidia compiled bug report in it's entirety:
Start of NVIDIA bug report log file. Please include this file, along
with a detailed description of your problem, when reporting a graphics
driver bug via the NVIDIA Linux forum (see devtalk.nvidia.com)
or by sending email to '[email protected]'.
nvidia-bug-report.sh Version: 17818519
Date: lør maj 31 21:11:50 CEST 2014
uname: Linux zarchbook 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014 x86_64 GNU/Linux
command line flags:
*** /etc/issue
*** ls: -rw-r--r-- 1 root root 20 2013-05-31 20:40:23.000000000 +0200 /etc/issue
Arch Linux \r (\l)
*** /var/log/nvidia-installer.log does not exist
*** /var/log/Xorg.0.log
*** ls: -rw-r--r-- 1 root zacariaz 7488 2014-05-31 21:10:38.492892729 +0200 /var/log/Xorg.0.log
[ 11.874]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 11.874] X Protocol Version 11, Revision 0
[ 11.874] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 11.875] Current Operating System: Linux zarchbook 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014 x86_64
[ 11.875] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet nomodeset rcutree.rcu_idle_gp_delay=1 loglevel=3
[ 11.875] Build Date: 14 April 2014 08:39:09AM
[ 11.875]
[ 11.875] Current version of pixman: 0.32.4
[ 11.875] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.875] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.875] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 31 21:10:34 2014
[ 11.877] (==) Using config file: "/etc/X11/xorg.conf"
[ 11.877] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 11.878] (==) ServerLayout "Layout0"
[ 11.878] (**) |-->Screen "Screen0" (0)
[ 11.878] (**) | |-->Monitor "Monitor0"
[ 11.878] (**) | |-->Device "Device0"
[ 11.878] (**) |-->Input Device "Keyboard0"
[ 11.878] (**) |-->Input Device "Mouse0"
[ 11.878] (**) Option "BlankTime" "0"
[ 11.878] (==) Automatically adding devices
[ 11.878] (==) Automatically enabling devices
[ 11.878] (==) Automatically adding GPU devices
[ 11.881] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 11.881] Entry deleted from font path.
[ 11.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 11.882] Entry deleted from font path.
[ 11.882] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 11.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 11.882] Entry deleted from font path.
[ 11.882] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 11.882] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 11.882] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11.882] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 11.882] (WW) Disabling Keyboard0
[ 11.882] (WW) Disabling Mouse0
[ 11.882] (II) Loader magic: 0x804c80
[ 11.882] (II) Module ABI versions:
[ 11.882] X.Org ANSI C Emulation: 0.4
[ 11.882] X.Org Video Driver: 15.0
[ 11.882] X.Org XInput driver : 20.0
[ 11.882] X.Org Server Extension : 8.0
[ 11.883] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 11.883] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 11.885] (--) PCI:*(0:1:0:0) 10de:0fd1:17aa:3972 rev 161, Mem @ 0xb3000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[ 11.885] (--) PCI: (0:2:0:0) 10de:0fd1:17aa:3972 rev 161, Mem @ 0xb2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[ 11.885] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 11.886] Initializing built-in extension Generic Event Extension
[ 11.886] Initializing built-in extension SHAPE
[ 11.886] Initializing built-in extension MIT-SHM
[ 11.886] Initializing built-in extension XInputExtension
[ 11.886] Initializing built-in extension XTEST
[ 11.886] Initializing built-in extension BIG-REQUESTS
[ 11.886] Initializing built-in extension SYNC
[ 11.886] Initializing built-in extension XKEYBOARD
[ 11.886] Initializing built-in extension XC-MISC
[ 11.886] Initializing built-in extension SECURITY
[ 11.886] Initializing built-in extension XINERAMA
[ 11.886] Initializing built-in extension XFIXES
[ 11.886] Initializing built-in extension RENDER
[ 11.886] Initializing built-in extension RANDR
[ 11.886] Initializing built-in extension COMPOSITE
[ 11.886] Initializing built-in extension DAMAGE
[ 11.886] Initializing built-in extension MIT-SCREEN-SAVER
[ 11.886] Initializing built-in extension DOUBLE-BUFFER
[ 11.887] Initializing built-in extension RECORD
[ 11.887] Initializing built-in extension DPMS
[ 11.887] Initializing built-in extension Present
[ 11.887] Initializing built-in extension DRI3
[ 11.887] Initializing built-in extension X-Resource
[ 11.887] Initializing built-in extension XVideo
[ 11.887] Initializing built-in extension XVideo-MotionCompensation
[ 11.887] Initializing built-in extension XFree86-VidModeExtension
[ 11.887] Initializing built-in extension XFree86-DGA
[ 11.887] Initializing built-in extension XFree86-DRI
[ 11.887] Initializing built-in extension DRI2
[ 11.887] (II) LoadModule: "glx"
[ 11.889] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11.978] (II) Module glx: vendor="NVIDIA Corporation"
[ 11.978] compiled for 4.0.2, module version = 1.0.0
[ 11.978] Module class: X.Org Server Extension
[ 11.978] (II) NVIDIA GLX Module 337.19 Tue Apr 29 19:48:33 PDT 2014
[ 11.979] Loading extension GLX
[ 11.979] (II) LoadModule: "nvidia"
[ 11.979] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 11.986] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 11.986] compiled for 4.0.2, module version = 1.0.0
[ 11.986] Module class: X.Org Video Driver
[ 11.986] (II) NVIDIA dlloader X Driver 337.19 Tue Apr 29 19:22:36 PDT 2014
[ 11.986] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 11.987] (++) using VT number 1
[ 11.988] (II) Loading sub module "fb"
[ 11.988] (II) LoadModule: "fb"
[ 11.988] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 11.989] (II) Module fb: vendor="X.Org Foundation"
[ 11.989] compiled for 1.15.1, module version = 1.0.0
[ 11.989] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.989] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 11.989] (II) Loading sub module "wfb"
[ 11.989] (II) LoadModule: "wfb"
[ 11.989] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 11.990] (II) Module wfb: vendor="X.Org Foundation"
[ 11.990] compiled for 1.15.1, module version = 1.0.0
[ 11.990] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.990] (II) Loading sub module "ramdac"
[ 11.990] (II) LoadModule: "ramdac"
[ 11.990] (II) Module "ramdac" already built-in
[ 12.004] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 12.004] (==) NVIDIA(0): RGB weight 888
[ 12.004] (==) NVIDIA(0): Default visual is TrueColor
[ 12.004] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 12.004] (**) NVIDIA(0): Option "NoLogo" "True"
[ 12.004] (**) NVIDIA(0): Option "SLI" "Auto"
[ 12.004] (**) NVIDIA(0): Option "ModeValidation" "AllowNonEdidModes"
[ 12.004] (**) NVIDIA(0): NVIDIA SLI auto-select rendering option.
[ 12.004] (**) NVIDIA(0): Option "UseEDID" "FALSE"
[ 12.004] (**) NVIDIA(0): Option "MetaModes" "1920x1080_60 +0+0 { ForceFullCompositionPipeline = On }"
[ 12.004] (**) NVIDIA(0): Enabling 2D acceleration
[ 12.004] (**) NVIDIA(0): Ignoring EDIDs
[ 15.847] (WW) NVIDIA(GPU-0): Failed to initialize the SLI configuration for the NVIDIA
[ 15.847] (WW) NVIDIA(GPU-0): graphics device PCI:1:0:0. Please see Chapter 29:
[ 15.847] (WW) NVIDIA(GPU-0): Configuring SLI and Multi-GPU FrameRendering in the README
[ 15.847] (WW) NVIDIA(GPU-0): for troubleshooting suggestions.
*** /etc/X11/xorg.conf
*** ls: -rw-r--r-- 1 root root 1733 2014-05-31 21:10:12.876322985 +0200 /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 337.19 (buildmeister@swio-display-x64-rhel04-03) Tue Apr 29 20:34:50 PDT 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "BlankTime" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 66.5 - 66.5
VertRefresh 59.9
ModeLine "1920x1080" 138.500 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync
Option "DPMS"
EndSection
Section "Device"
BusID "PCI:1:0:0"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "1920x1080_60 +0+0 { ForceFullCompositionPipeline = On }"
Option "NoLogo" "True"
Option "ModeValidation" "AllowNonEdidModes"
Option "UseEDID" "FALSE"
Option "SLI" "Auto"
SubSection "Display"
Depth 24
EndSubSection
EndSection
*** /etc/X11/xorg.conf.d/10-evdev.conf
*** ls: -rw-r--r-- 1 root root 1099 2014-04-14 10:40:04.000000000 +0200 /etc/X11/xorg.conf.d/10-evdev.conf
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev tablet catchall"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
*** /etc/X11/xorg.conf.d/10-keyboard.conf
*** ls: -rw-r--r-- 1 root root 201 2014-05-07 20:02:13.920335503 +0200 /etc/X11/xorg.conf.d/10-keyboard.conf
Section "InputClass"
Identifier "system-keyboard"
MatchIsKeyboard "on"
Option "XkbLayout" "dk"
Option "XkbModel" "pc104"
Option "XkbVariant" "qwerty"
EndSection
*** /etc/X11/xorg.conf.d/10-quirks.conf
*** ls: -rw-r--r-- 1 root root 377 2014-04-14 10:40:06.000000000 +0200 /etc/X11/xorg.conf.d/10-quirks.conf
# Collection of quirks and blacklist/whitelists for specific devices.
# Accelerometer device, posts data through ABS_X/ABS_Y, making X unusable
# http://bugs.freedesktop.org/show_bug.cgi?id=22442
Section "InputClass"
Identifier "ThinkPad HDAPS accelerometer blacklist"
MatchProduct "ThinkPad HDAPS accelerometer data"
Option "Ignore" "on"
EndSection
*** /home/zacariaz/.nvidia-settings-rc
*** ls: -rw-r--r-- 1 zacariaz users 1982 2014-05-31 20:34:36.266975242 +0200 /home/zacariaz/.nvidia-settings-rc
# /home/zacariaz/.nvidia-settings-rc
# Configuration file for nvidia-settings - the NVIDIA X Server Settings utility
# Generated on Sat May 31 20:34:36 2014
# ConfigProperties:
RcFileLocale = C
ToolTips = Yes
DisplayStatusBar = Yes
SliderTextEntries = Yes
IncludeDisplayNameInConfigFile = No
ShowQuitDialog = Yes
UpdateRulesOnProfileNameChange = Yes
Timer = PowerMizer_Monitor_(GPU_1),Yes,1000
Timer = Thermal_Monitor_(GPU_1),Yes,1000
Timer = Memory_Used_(GPU_1),Yes,3000
Timer = Memory_Used_(GPU_0),Yes,3000
Timer = Thermal_Monitor_(GPU_0),Yes,1000
Timer = PowerMizer_Monitor_(GPU_0),Yes,1000
# Attributes:
0/SyncToVBlank=1
0/LogAniso=0
0/FSAA=0
0/TextureSharpen=0
0/TextureClamping=1
0/FXAA=0
0/AllowFlipping=1
0/FSAAAppControlled=1
0/LogAnisoAppControlled=1
0/OpenGLImageSettings=3
0/FSAAAppEnhanced=0
0/XVideoSyncToDisplayID=VGA-0
[DPY:VGA-0]/Dithering=0
[DPY:VGA-0]/DitheringMode=0
[DPY:VGA-0]/DitheringDepth=0
[DPY:VGA-0]/SynchronousPaletteUpdates=0
[DPY:LVDS-0]/Dithering=0
[DPY:LVDS-0]/DitheringMode=0
[DPY:LVDS-0]/DitheringDepth=0
[DPY:LVDS-0]/SynchronousPaletteUpdates=0
[DPY:HDMI-0]/Dithering=0
[DPY:HDMI-0]/DitheringMode=0
[DPY:HDMI-0]/DitheringDepth=0
[DPY:HDMI-0]/SynchronousPaletteUpdates=0
[DPY:VGA-0]/Dithering=0
[DPY:VGA-0]/DitheringMode=0
[DPY:VGA-0]/DitheringDepth=0
[DPY:VGA-0]/SynchronousPaletteUpdates=0
[DPY:LVDS-0]/RedBrightness=0.000000
[DPY:LVDS-0]/GreenBrightness=0.000000
[DPY:LVDS-0]/BlueBrightness=0.000000
[DPY:LVDS-0]/RedContrast=0.000000
[DPY:LVDS-0]/GreenContrast=0.000000
[DPY:LVDS-0]/BlueContrast=0.000000
[DPY:LVDS-0]/RedGamma=1.000000
[DPY:LVDS-0]/GreenGamma=1.000000
[DPY:LVDS-0]/BlueGamma=1.000000
[DPY:LVDS-0]/Dithering=0
[DPY:LVDS-0]/DitheringMode=0
[DPY:LVDS-0]/DitheringDepth=0
[DPY:LVDS-0]/DigitalVibrance=0
[DPY:LVDS-0]/ColorSpace=0
[DPY:LVDS-0]/ColorRange=0
[DPY:LVDS-0]/SynchronousPaletteUpdates=0
[DPY:HDMI-0]/Dithering=0
[DPY:HDMI-0]/DitheringMode=0
[DPY:HDMI-0]/DitheringDepth=0
[DPY:HDMI-0]/SynchronousPaletteUpdates=0
*** /usr/share/nvidia/nvidia-application-profiles-337.19-rc
*** ls: -rw-r--r-- 1 root root 2310 2014-05-20 14:28:33.000000000 +0200 /usr/share/nvidia/nvidia-application-profiles-337.19-rc
# Application profiles for the NVIDIA Linux graphics driver, version 337.19
# Last modified: Tue Apr 29 19:51:54 PDT 2014
# These profiles were provided by NVIDIA and should not be modified. If you
# wish to change the defaults provided here, you can override them by creating
# custom rules in /etc/nvidia/nvidia-application-profiles-rc (which will apply
# system-wide) or, for a given user, $HOME/.nv/nvidia-application-profiles-rc
# (which will apply to that particular user). See the "APPLICATION PROFILE
# SEARCH PATH" section of the NVIDIA Linux Graphics Driver README for more
# information.
"profiles" : [
"name" : "NonConformantBlitFramebufferScissor",
"settings" : [ "GLConformantBlitFramebufferScissor", false ]
"name" : "CL1C",
"settings" : [ "0x528ab3", 1 ]
"name" : "FA0",
"settings" : [ "10572898", 0 ]
"name" : "ExactGLESVersion",
"settings" : [ "ForceRequestedESVersion", 1 ]
"name" : "BGTE",
"settings" : [ "GLAppReturnOnlyBasicGlslType", 1 ]
"rules" : [
# Work around GNOME bug 690451 (see
# https://bugzilla.gnome.org/show_bug.cgi?id=690451)
"pattern" : {
"feature" : "dso",
"matches" : "libcogl.so"
"profile" : "NonConformantBlitFramebufferScissor"
{ "pattern" : "Maya2014", "profile" : "CL1C" },
{ "pattern" : "xsi", "profile" : "CL1C" },
{ "pattern" : "HoudiniFX", "profile" : "CL1C" },
{ "pattern" : "katana", "profile" : "CL1C" },
{ "pattern" : "Autodesk Mudbox 2014 64-bit", "profile" : "CL1C" },
{ "pattern" : "octane", "profile" : "CL1C" },
{ "pattern" : "Fusion64_6.4", "profile" : "CL1C" },
{ "pattern" : "Nuke7.0", "profile" : "CL1C" },
{ "pattern" : "vray.exe", "profile" : "CL1C" },
{ "pattern" : "vray.bin", "profile" : "CL1C" },
{ "pattern" : "kwin_gles", "profile" : "FA0" },
{ "pattern" : "kwin_gles", "profile" : "ExactGLESVersion" },
{ "pattern" : "heaven_x86", "profile" : "BGTE" },
{ "pattern" : "heaven_x64", "profile" : "BGTE" }
Skipping ldd output (glxinfo not found)
/sbin/lspci -d "10de:*" -v -xxx
01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 650M] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device 3972
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at b3000000 (32-bit, non-prefetchable) [size=16M]
Memory at a0000000 (64-bit, prefetchable) [size=256M]
Memory at b0000000 (64-bit, prefetchable) [size=32M]
I/O ports at 4000 [size=128]
Expansion ROM at b4080000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Capabilities: [900] #19
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia
00: de 10 d1 0f 07 00 10 00 a1 00 00 03 10 00 80 00
10: 00 00 00 b3 0c 00 00 a0 00 00 00 00 0c 00 00 b0
20: 00 00 00 00 01 40 00 00 00 00 00 00 aa 17 72 39
30: 00 00 f8 ff 60 00 00 00 00 00 00 00 00 01 00 00
40: aa 17 72 39 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 03 00 08 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 b4 02 00 e1 8d 2c 01
80: 30 29 00 00 03 3d 45 00 43 00 81 10 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 13 00 00 00
a0: 00 00 00 00 0e 00 00 00 03 00 01 00 00 00 00 00
b0: 00 00 00 00 09 00 14 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01:00.1 Audio device: NVIDIA Corporation GK107 HDMI Audio Controller (rev a1)
Subsystem: Lenovo Device 3977
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at b4000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00: de 10 1b 0e 06 00 10 00 a1 00 03 04 10 00 80 00
10: 00 00 00 b4 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 77 39
30: 00 00 00 00 60 00 00 00 00 00 00 00 00 02 00 00
40: aa 17 77 39 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 03 00 08 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 00 02 00 e1 8d 2c 01
80: 30 29 00 00 03 3d 45 00 43 00 81 10 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 13 00 00 00
a0: 00 00 00 00 0e 00 00 00 00 00 01 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
02:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 650M] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device 3972
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at b2000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at d0000000 (64-bit, prefetchable) [size=32M]
I/O ports at 3000 [size=128]
Expansion ROM at <ignored> [disabled]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Capabilities: [900] #19
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia
00: de 10 d1 0f 07 00 10 00 a1 00 00 03 10 00 00 00
10: 00 00 00 b2 0c 00 00 c0 00 00 00 00 0c 00 00 d0
20: 00 00 00 00 01 30 00 00 00 00 00 00 aa 17 72 39
30: 00 00 f8 ff 60 00 00 00 00 00 00 00 00 01 00 00
40: aa 17 72 39 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 03 00 08 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 b4 02 00 e1 8d 2c 01
80: 10 29 00 00 03 3d 45 01 43 00 82 10 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 13 00 00 00
a0: 00 00 00 00 0e 00 00 00 03 00 01 00 00 00 00 00
b0: 00 00 00 00 09 00 14 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
/sbin/lspci -d "10b5:*" -v -xxx
/sbin/lspci -t
-[0000:00]-+-00.0
+-01.0-[01]--+-00.0
| \-00.1
+-01.1-[02]----00.0
+-14.0
+-16.0
+-1a.0
+-1b.0
+-1c.0-[03]----00.0
+-1c.1-[04]----00.0
+-1c.3-[05]--+-00.0
| +-00.2
| +-00.3
| \-00.4
+-1d.0
+-1f.0
+-1f.2
\-1f.3
/sbin/lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09)
00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0155] (rev 09)
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04)
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04)
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4)
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4)
00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4)
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04)
00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04)
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04)
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK107M [GeForce GT 650M] [10de:0fd1] (rev a1)
01:00.1 Audio device [0403]: NVIDIA Corporation GK107 HDMI Audio Controller [10de:0e1b] (rev a1)
02:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK107M [GeForce GT 650M] [10de:0fd1] (rev a1)
03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8161 Gigabit Ethernet [1969:1091] (rev 10)
04:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 2230 [8086:0888] (rev c4)
05:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2392] (rev 30)
05:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2391] (rev 30)
05:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2393] (rev 30)
05:00.4 System peripheral [0880]: JMicron Technology Corp. xD Host Controller [197b:2394] (rev 30)
/sbin/lsusb
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 8087:07da Intel Corp.
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 04f2:b331 Chicony Electronics Co., Ltd
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Skipping dmidecode output (dmidecode not found)
/sbin/modinfo nvidia | grep vermagic
vermagic: 3.14.4-1-ARCH SMP preempt mod_unload modversions
Scanning kernel log files for NVRM messages:
/var/log/messages is not readable
/var/log/kernel.log is not readable
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14.4-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.0 20140507 (prerelease) (GCC) ) #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014
[ 0.000000] Command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet nomodeset rcutree.rcu_idle_gp_delay=1 loglevel=3
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000995affff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000995b0000-0x000000009a9affff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009a9b0000-0x000000009efbefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009efbf000-0x000000009f6befff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f6bf000-0x000000009f7befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f7bf000-0x000000009f7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009f7ff000-0x000000009f7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f800000-0x000000009fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x985ad018-0x985d3057] usable ==> usable
[ 0.000000] e820: update [mem 0x98586018-0x985ac057] usable ==> usable
[ 0.000000] e820: update [mem 0x98579018-0x98585057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000087fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000098579017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000098579018-0x0000000098585057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000098585058-0x0000000098586017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000098586018-0x00000000985ac057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000985ac058-0x00000000985ad017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000985ad018-0x00000000985d3057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000985d3058-0x00000000995affff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000995b0000-0x000000009a9affff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009a9b0000-0x000000009efbefff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009efbf000-0x000000009f6befff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009f6bf000-0x000000009f7befff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000009f7bf000-0x000000009f7fefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000009f7ff000-0x000000009f7fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009f800000-0x000000009fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000045effffff] usable
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x9f7fe000 ACPI 2.0=0x9f7fe014 SMBIOS=0x9f6bef98
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x000000000006f000) (0MB)
[ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000080000) (0MB)
[ 0.000000] efi: mem05: type=3, attr=0xf, range=[0x0000000000080000-0x0000000000082000) (0MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000082000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem07: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f5b000) (15MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000001f5b000-0x000000007f857000) (2008MB)
[ 0.000000] efi: mem11: type=2, attr=0xf, range=[0x000000007f857000-0x0000000080000000) (7MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000080000000-0x00000000979c0000) (377MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x00000000979c0000-0x00000000979e0000) (0MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x00000000979e0000-0x0000000097e62000) (4MB)
[ 0.000000] efi: mem15: type=1, attr=0xf, range=[0x0000000097e62000-0x000000009821b000) (3MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x000000009821b000-0x0000000098579000) (3MB)
[ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x0000000098579000-0x00000000985d4000) (0MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000985d4000-0x00000000995b0000) (15MB)
[ 0.000000] efi: mem19: type=0, attr=0xf, range=[0x00000000995b0000-0x000000009a9b0000) (20MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x000000009a9b0000-0x000000009a9b8000) (0MB)
[ 0.000000] efi: mem21: type=2, attr=0xf, range=[0x000000009a9b8000-0x000000009a9bb000) (0MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x000000009a9bb000-0x000000009a9bc000) (0MB)
[ 0.000000] efi: mem23: type=2, attr=0xf, range=[0x000000009a9bc000-0x000000009a9bd000) (0MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x000000009a9bd000-0x000000009a9be000) (0MB)
[ 0.000000] efi: mem25: type=2, attr=0xf, range=[0x000000009a9be000-0x000000009a9bf000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x000000009a9bf000-0x000000009aba8000) (1MB)
[ 0.000000] efi: mem27: type=1, attr=0xf, range=[0x000000009aba8000-0x000000009abbf000) (0MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x000000009abbf000-0x000000009af27000) (3MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x000000009af27000-0x000000009b063000) (1MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x000000009b063000-0x000000009b064000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x000000009b064000-0x000000009c9f3000) (25MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x000000009c9f3000-0x000000009c9fb000) (0MB)
[ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x000000009c9fb000-0x000000009ca11000) (0MB)
[ 0.000000] efi: mem34: type=7, attr=0xf, range=[0x000000009ca11000-0x000000009ca12000) (0MB)
[ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x000000009ca12000-0x000000009ca1d000) (0MB)
[ 0.000000] efi: mem36: type=7, attr=0xf, range=[0x000000009ca1d000-0x000000009ca1f000) (0MB)
[ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x000000009ca1f000-0x000000009ca21000) (0MB)
[ 0.000000] efi: mem38: type=7, attr=0xf, range=[0x000000009ca21000-0x000000009ca22000) (0MB)
[ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x000000009ca22000-0x000000009ca45000) (0MB)
[ 0.000000] efi: mem40: type=7, attr=0xf, range=[0x000000009ca45000-0x000000009ca47000) (0MB)
[ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x000000009ca47000-0x000000009cd81000) (3MB)
[ 0.000000] efi: mem42: type=7, attr=0xf, range=[0x000000009cd81000-0x000000009cd82000) (0MB)
[ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x000000009cd82000-0x000000009cfa7000) (2MB)
[ 0.000000] efi: mem44: type=7, attr=0xf, range=[0x000000009cfa7000-0x000000009cfa8000) (0MB)
[ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x000000009cfa8000-0x000000009cfbf000) (0MB)
[ 0.000000] efi: mem46: type=7, attr=0xf, range=[0x000000009cfbf000-0x000000009cfc5000) (0MB)
[ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x000000009cfc5000-0x000000009cfd0000) (0MB)
[ 0.000000] efi: mem48: type=7, attr=0xf, range=[0x000000009cfd0000-0x000000009cfd2000) (0MB)
[ 0.000000] efi: mem49: type=4, attr=0xf, range=[0x000000009cfd2000-0x000000009cfe9000) (0MB)
[ 0.000000] efi: mem50: type=7, attr=0xf, range=[0x000000009cfe9000-0x000000009cfea000) (0MB)
[ 0.000000] efi: mem51: type=4, attr=0xf, range=[0x000000009cfea000-0x000000009ebbf000) (27MB)
[ 0.000000] efi: mem52: type=7, attr=0xf, range=[0x000000009ebbf000-0x000000009ec3a000) (0MB)
[ 0.000000] efi: mem53: type=3, attr=0xf, range=[0x000000009ec3a000-0x000000009efbf000) (3MB)
[ 0.000000] efi: mem54: type=5, attr=0x800000000000000f, range=[0x000000009efbf000-0x000000009f04e000) (0MB)
[ 0.000000] efi: mem55: type=6, attr=0x800000000000000f, range=[0x000000009f04e000-0x000000009f050000) (0MB)
[ 0.000000] efi: mem56: type=5, attr=0x800000000000000f, range=[0x000000009f050000-0x000000009f066000) (0MB)
[ 0.000000] efi: mem57: type=6, attr=0x800000000000000f, range=[0x000000009f066000-0x000000009f067000) (0MB)
[ 0.000000] efi: mem58: type=5, attr=0x800000000000000f, range=[0x000000009f067000-0x000000009f07f000) (0MB)
[ 0.000000] efi: mem59: type=6, attr=0x800000000000000f, range=[0x000000009f07f000-0x000000009f080000) (0MB)
[ 0.000000] efi: mem60: type=5, attr=0x800000000000000f, range=[0x000000009f080000-0x000000009f08b000) (0MB)
[ 0.000000] efi: mem61: type=6, attr=0x800000000000000f, range=[0x000000009f08b000-0x000000009f08c000) (0MB)
[ 0.000000] efi: mem62: type=5, attr=0x800000000000000f, range=[0x000000009f08c000-0x000000009f091000) (0MB)
[ 0.000000] efi: mem63: type=6, attr=0x800000000000000f, range=[0x000000009f091000-0x000000009f092000) (0MB)
[ 0.000000] efi: mem64: type=5, attr=0x800000000000000f, range=[0x000000009f092000-0x000000009f0a0000) (0MB)
[ 0.000000] efi: mem65: type=6, attr=0x800000000000000f, range=[0x000000009f0a0000-0x000000009f0a1000) (0MB)
[ 0.000000] efi: mem66: type=5, attr=0x800000000000000f, range=[0x000000009f0a1000-0x000000009f0f2000) (0MB)
[ 0.000000] efi: mem67: type=6, attr=0x800000000000000f, range=[0x000000009f0f2000-0x000000009f137000) (0MB)
[ 0.000000] efi: mem68: type=5, attr=0x800000000000000f, range=[0x000000009f137000-0x000000009f1bf000) (0MB)
[ 0.000000] efi: mem69: type=6, attr=0x800000000000000f, range=[0x000000009f1bf000-0x000000009f2bf000) (1MB)
[ 0.000000] efi: mem70: type=0, attr=0xf, range=[0x000000009f2bf000-0x000000009f6bf000) (4MB)
[ 0.000000] efi: mem71: type=10, attr=0xf, range=[0x000000009f6bf000-0x000000009f7bf000) (1MB)
[ 0.000000] efi: mem72: type=9, attr=0xf, range=[0x000000009f7bf000-0x000000009f7ff000) (0MB)
[ 0.000000] efi: mem73: type=4, attr=0xf, range=[0x000000009f7ff000-0x000000009f800000) (0MB)
[ 0.000000] efi: mem74: type=7, attr=0xf, range=[0x0000000100000000-0x000000045f000000) (13808MB)
[ 0.000000] efi: mem75: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem76: type=0, attr=0x0, range=[0x000000009f800000-0x00000000a0000000) (8MB)
[ 0.000000] efi: mem77: type=11, attr=0x8000000000000001, range=[0x00000000f0000000-0x00000000f4000000) (64MB)
[ 0.000000] efi: mem78: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb04000) (0MB)
[ 0.000000] efi: mem79: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem80: type=11, attr=0x8000000000000001, range=[0x00000000fed10000-0x00000000fed1a000) (0MB)
[ 0.000000] efi: mem81: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem82: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem83: type=11, attr=0x8000000000000000, range=[0x00000000ffb80000-0x0000000100000000) (4MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20193/INVALID, BIOS 6BCN42WW(V2.02) 02/08/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x45f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 09F800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0FF800000 mask FFF800000 write-protect
[ 0.000000] 4 base 100000000 mask F00000000 write-back
[ 0.000000] 5 base 200000000 mask E00000000 write-back
[ 0.000000] 6 base 400000000 mask F80000000 write-back
[ 0.000000] 7 base 45F000000 mask FFF000000 uncachable
[ 0.000000] 8 base 460000000 mask FE0000000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x9f800 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
[ 0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
[ 0.000000] BRK [0x01b3b000, 0x01b3bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x45ee00000-0x45effffff]
[ 0.000000] [mem 0x45ee00000-0x45effffff] page 2M
[ 0.000000] BRK [0x01b3c000, 0x01b3cfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x45c000000-0x45edfffff]
[ 0.000000] [mem 0x45c000000-0x45edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x45bffffff]
[ 0.000000] [mem 0x400000000-0x45bffffff] page 2M
[ 0.000000] BRK [0x01b3d000, 0x01b3dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x995affff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x993fffff] page 2M
[ 0.000000] [mem 0x99400000-0x995affff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9a9b0000-0x9efbefff]
[ 0.000000] [mem 0x9a9b0000-0x9a9fffff] page 4k
[ 0.000000] [mem 0x9aa00000-0x9edfffff] page 2M
[ 0.000000] [mem 0x9ee00000-0x9efbefff] page 4k
[ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9f7ff000-0x9f7fffff]
[ 0.000000] [mem 0x9f7ff000-0x9f7fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x7f857000-0x7fffffff]
[ 0.000000] ACPI: RSDP 000000009f7fe014 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 000000009f7fe210 0000AC (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 000000009f7fa000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 000000009f7ed000 009D93 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 000000009f7bb000 000040
[ 0.000000] ACPI: SLIC 000000009f7fd000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 000000009f7fc000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 000000009f7fb000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 000000009f7f9000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 000000009f7f8000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 000000009f7f7000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009f7ec000 0006FE (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 000000009f7ea000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 000000009f7e5000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 000000009f7e4000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 000000009f7e2000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 000000009f7e1000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009f7e0000 000926 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009f7df000 000B22 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009f7dc000 0010F1 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BGRT 000000009f7de000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000045effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x45effffff]
[ 0.000000] NODE_DATA [mem 0x45efea000-0x45efeefff]
[ 0.000000] [ffffea0000000000-ffffea00117fffff] PMD -> [ffff88044e600000-ffff88045e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x45effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x995affff]
[ 0.000000] node 0: [mem 0x9a9b0000-0x9efbefff]
[ 0.000000] node 0: [mem 0x9f7ff000-0x9f7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x45effffff]
[ 0.000000] On node 0 totalpages: 4180807
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 24 pages reserved
[ 0.000000] DMA zone: 3975 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10031 pages used for memmap
[ 0.000000] DMA32 zone: 641984 pages, LIFO batch:31
[ 0.000000] Normal zone: 55232 pages used for memmap
[ 0.000000] Normal zone: 3534848 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x98579000-0x98579fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x98585000-0x98585fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x98586000-0x98586fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x985ac000-0x985acfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x985ad000-0x985adfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x985d3000-0x985d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x995b0000-0x9a9affff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9efbf000-0x9f6befff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f6bf000-0x9f7befff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f7bf000-0x9f7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f800000-0x9fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
[ 0.000000] e820: [mem 0xa0000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88045ec00000 s87040 r8192 d23552 u262144
[ 0.000000] pcpu-alloc: s87040 r8192 d23552 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4115456
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet nomodeset rcutree.rcu_idle_gp_delay=1 loglevel=3
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16292016K/16723228K available (5230K kernel code, 857K rwdata, 1632K rodata, 1120K init, 1288K bss, 431212K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.558 MHz processor
[ 0.000035] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.66 BogoMIPS (lpj=7981860)
[ 0.000037] pid_max: default: 32768 minimum: 301
[ 0.000044] ACPI: Core revision 20131218
[ 0.006081] ACPI: All ACPI Tables successfully acquired
[ 0.030009] Security Framework initialized
[ 0.030016] Yama: becoming mindful.
[ 0.031004] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.035068] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.036876] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.036893] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.037118] Initializing cgroup subsys memory
[ 0.037123] Initializing cgroup subsys devices
[ 0.037125] Initializing cgroup subsys freezer
[ 0.037126] Initializing cgroup subsys net_cls
[ 0.037127] Initializing cgroup subsys blkio
[ 0.037150] CPU: Physical Processor ID: 0
[ 0.037151] CPU: Processor Core ID: 0
[ 0.037156] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.037529] mce: CPU supports 9 MCE banks
[ 0.037542] CPU0: Thermal monitoring enabled (TM1)
[ 0.037553] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 2
[ 0.037649] Freeing SMP alternatives memory: 20K (ffffffff819f0000 - ffffffff819f5000)
[ 0.041198] ftrace: allocating 20029 entries in 79 pages
[ 0.050996] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.084028] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
[ 0.084036] TSC deadline timer enabled
[ 0.084045] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.084051] ... version: 3
[ 0.084052] ... bit width: 48
[ 0.084053] ... generic registers: 4
[ 0.084054] ... value mask: 0000ffffffffffff
[ 0.084055] ... max period: 0000ffffffffffff
[ 0.084056] ... fixed-purpose events: 3
[ 0.084057] ... event mask: 000000070000000f
[ 0.110826] x86: Booting SMP configuration:
[ 0.110828] .... node #0, CPUs: #1
[ 0.124613] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.131276] #2 #3 #4 #5 #6 #7
[ 0.246855] x86: Booted up 1 node, 8 CPUs
[ 0.246859] smpboot: Total of 8 processors activated (38328.30 BogoMIPS)
[ 0.254157] devtmpfs: initialized
[ 0.257424] PM: Registering ACPI NVS region [mem 0x9f6bf000-0x9f7befff] (1048576 bytes)
[ 0.258171] pinctrl core: initialized pinctrl subsystem
[ 0.258207] RTC time: 19:11:33, date: 05/31/14
[ 0.258239] NET: Registered protocol family 16
[ 0.258316] cpuidle: using governor ladder
[ 0.258318] cpuidle: using governor menu
[ 0.258361] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.258362] ACPI: bus type PCI registered
[ 0.258364] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.258425] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.258428] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.266014] PCI: Using configuration type 1 for base access
[ 0.266838] bio: create slab <bio-0> at 0
[ 0.266930] ACPI: Added _OSI(Module Device)
[ 0.266932] ACPI: Added _OSI(Processor Device)
[ 0.266933] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.266934] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.269731] ACPI: Executed 1 bTrilby wrote:
zacariaz wrote:* b u m p *
Do not do this.
If you want help, start providing relevant information beyond "it don't work". You say you followed the instructions ... which instructions? What steps did you take? It is clear from your xorg.conf that you did not follow the only instructions I could find in the archlinux wiki. Follow those instructions, and post the output of the relevant diagnostic or information-gathering steps included there.
Also if you have information which could be useful - such as which mobile devices/cards allegedly don't work - then share that. Don't keep us in the dark.
I should think that it's quite obvious that I've followed the wiki instruction, which basically is one line in xorg, as is the official nvidia instructions.
This is most likely a problem related specificlally to the gt 650m and/or the lenovo ideapad y500 (and perhaps derivatives thereof).
I do not believe I've left any information out.
Of course if I've done something wrong, I apologize and will do my best to avoid it in the future. As for the rest, I'd very much like to know which instructions I did not follow, as I've done all that I can think of and telling me that I haven't is hardly useful. As far as I aware, the wiki instructs you to ad two line in the xorg.conf, which I've done. I will of course read it again, hoping to figure out what I've apparently missed, though I've read it so many times already that I don't expect to learn anything. -
Lenovo Ideapad Yoga 13 Recovery Issues
I'm very disappointed from Lenovo for producing Laptop without complete recovery solution.
I mistakely formated the hard drive of Lenovo IdeaPad Yoga 13, so I lost the recovery, so I called Contact Centre and they pointed me to Jumbo Electronics Company in Abu Dhabi of which are aotherized to do services for Lenovo. I went to them to save time, and get my laptop back to the initial state of which I bought, instead of getting the original state of how I bought the laptop which was:
1. Windows 8.1 Single Language.
2. All Drivers are Installed.
3. At Start-Up, I should be getting to put in my sync account while it's preparing windows for first use.
I got the following:
1. Windows 8 Single Language installed. (Not 8.1)
2. Drivers are installed.
3. Recovery is supposed to be back.
4. Local User Account "Lenovo" was created.
OK, Skip it, it's fine. I thought about trying to do recovery to make sure of the recovery working before I do back up of it, here is what I got:
1. Windows 8 Single Language Installed (Not 8.1)
2. Not all drivers are installed (For ex. Wireless Driver which is very important for this laptop since no LAN no other connection except wireless)
So I thought they gave me the non-original recovery because of the missing drivers which was not believable to me.
I contacted "Service Centre for IdeaPad Within UAE" ended up telling me that that was the original copy of the Recovery and Yes, it does not Install the Wireless Drivers! And that he himself tried it at his side and confirms it!
Can somebody explain to me how come that I paid for recovery to recover the laptop to the initial state and I did not get the real initial state of the laptop?
How come at the service centre they don't tell me "Warning" about the wireless and that I have to download and back-up the drivers before doing the recovery of the laptop?
How come actually Lenovo produces a laptop with recovery missing drivers?
VERY DISAPPOINTING! VERY ANGRY AT LENOVO! If I CAN RETURN THE LAPTOP AND BUY FROM DIFFERENT BRAND, I WOULD DO SO!
BIOS FEATURES ARE POOR NO BOOTING FROM SD CARD AVAILABLE!
WIRELESS IS POOR IN QUALITY WHILE ITS THE ONLY AND MAIN CONNECTION FOR THE LAPTOP!
Simply you are SELLING half Quality Products, WORST RECOVERY SOLUTIONS EVER! AND EXPENSIVE FOR NOTHING!
VERY DISAPPOINTED AT LENOVO PRODUCTS FROM THE FIRST IMPRESSION OF LENOVO IDEAPAD YOGA 13!I have the same problem. If I continually power cycle the machine (either via CTRL-ALT-DEL or the switch) combined with either plugging or unplugging it from power I can eventually get it to boot up. No idea how to fix it yet. I noticed that the fan doesnt seem to be running when it doesn't boot and it is almost like it has to "warm up" or something before it will boot to the hard drive. Any fixes would be greatly appreciated.
-
Need help with installing Ubuntu on Lenovo Ideapad Z500.
I just bought a new Lenovo Ideapad Z500 yesterday. It came with Windows 8 pre-installed. Now, I also want to install Ubuntu over it. The disk is partitioned as follows:
Disk C: - 880 GB (approx)
Disk D: - 30 GB (approx) (I don't remember exact partition, as my laptop is currently at my home).
Then I thought, I would better re-partition the C drive into 1 or 2 small drives. So, I shrinked the C drive by going into "Disk Management", and then created 3 more partitions - 240 GB * 2, 300 GB * 1, and left the C drive with 100 GB space. I didn't modified the D drive.
Till then I didn't went through any infomation over internet. But, now when I went through this forum, I found out that my OKR won't work now, that I still have to confirm when I go home. So, now I'm worried. I scanned through so many post here, and no where found a way to install Ubuntu on Ideapad Z500.
I also read that it will be possible to run OKR, if I can re-store the partition to it's original. I think this can be done, since I just have to remove the volume I created, and allocate the memory back to C drive. And it will be back to original state, as I didn't modify D drive (correct me if am wrong, or if it can't happen).
So, the major question that I want to ask is, is there no way to partition my disk, and install Ubuntu in one of them.hi rohitjain-rj,
Welcome to the Lenovo Forums.
On a Z400 Touch running on Windows 8 preload, shrinking the the C-Drive under Disk Management and creating multiple partitions on the unallocated space and then reverting the partition back to original made the One Key Recovery work as normal - haven't tested this yet on the Z500 as there's no available unit but chances are, it may also work.
In installing Ubuntu, have you tried to install Ubuntu via Wubi ?
If Ubuntu doesn't start, boot into the BIOS (press the OKR button > select BIOS Setup Utility) and set the following:
Boot Tab
Boot Mode - Legacy Support
Boot Priority - Legacy First
Exit Tab
OS Optimized Defaults - Other OS
Regards.
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Lenovo Ideapad with no disc drive but i have Adobe Photoshop as a disc copy. Can i redeem it online?
I have a Lenovo IdeaPad but it has no disc drive and i have a copy of Adobe Photoshop Elements 10 (I found it just now) But it's a disc version and i cant find a redeem and download for it. What do i do/Where do i go?
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Lenovo Ideapad y550: shuts down when unplugged, wont start on battery. new battery did nothing.
Hello wonderful Lenovo user's and guru's! I have recieved a Lenovo Ideapad y550 from a pawn shop. I grabbed it because I knew this was a pretty good computer. I thought I could fix any problems it has and it would be just fine. =] So this laptop shuts down instantly if I unplug the power cord. Just dies, no time to do any saving or lights to blink. Just instant shutdown. Also when I try to power it on when its unplugged from the AC, it does nothing. Also shuts off in the middle of playing guild wars 2. No other games shut off on me. When I realized I had this problem, I ordered a new battery for my model of laptop. The new battery is doing the exact same thing as the other battery that was in it. It seems the computer has a fresh install of windows except with a .old folder in the C drive. So I am guessing someone did some sort of reformat or recover? the recovery was done through the Pawn Shop. It seems that it has windows 7 64 bit. Any help would be greatly appreciated!
Here is some useful information from my System Information file: -System Information-
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name *********
System Manufacturer LENOVO
System Model 4186
System Type x64-based PC
Processor Intel® Core™2 Duo CPU T6500 @ 2.10GHz, 2100 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date LENOVO 15CN35WW(V2.08), 3/15/2010
SMBIOS Version 2.5
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = “6.1.7601.17514”
User Name ********\Pawn One
Time Zone Mountain Standard Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 3.99 GB
Available Physical Memory 2.82 GB
Total Virtual Memory 7.99 GB
Available Virtual Memory 6.74 GB
Page File Space 3.99 GB
Page File C:\pagefile.sys -Display Information-
Name NVIDIA GeForce GT 240M
PNP Device ID PCI\VEN_10DE&DEV_0A34&SUBSYS_38FF17AA&REV_A2\4&68F560D&0&0008
Adapter Type GeForce GT 240M, NVIDIA compatible
Adapter Description NVIDIA GeForce GT 240M
Adapter RAM 1.00 GB (1,073,741,824 bytes)
Installed Drivers nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver Version 8.17.12.5896
INF File oem2.inf (Section046 section)
Color Planes Not Available
Color Table Entries 4294967296
Resolution 1366 × 768 × 60 hertz
Bits/Pixel 32
Memory Address 0xF4000000-0xF4FFFFFF
Memory Address 0xD0000000-0xDFFFFFFF
Memory Address 0xCE000000-0xCFFFFFFF
I/O Port 0×00002000-0×0000207F
IRQ Channel IRQ 16
I/O Port 0×000003B0-0×000003BB
I/O Port 0×000003C0-0×000003DF
Memory Address 0xA0000-0xBFFFF
Driver c:\windows\system32\drivers\nvlddmkm.sys (8.17.12.5896, 12.58 MB (13,187,176 bytes), 5/31/2011 7:27 PM) -Problem Devices-
Not Available ACPI\ENE0201\3&11583659&0 The drivers for this device are not installed.
Not Available ACPI\VPC2004\0 The drivers for this device are not installed. -
I thought I may as well start a s10 thread as there seems to be a thread for every other netbook. I just received mine and I will post anything relevant to the s10 on arch here. Perhaps others have arch on s10 comments.
Last edited by webbrewer (2009-01-26 05:26:24)webbrewer wrote:Also, the volume buttons (Fn-Left and Fn-Right) need to have keybinding to work. I have not messed with those yet.
Put something like
snip
in your ~/.Xmodmap file, then you can map the XF86Audio* keys to the correct functions in your window manager. This may not be necessary in all window managers but I had to do this before fluxbox would recognize the keypresses.
[b]EDIT: This seems to only be necessary in flux for whatever reason. I'm back to my normal dwm and this messed the keybinds up, so I'll remove them from this thread until I do some further experimenting.
I also found that 866 what the best framebuffer resolution the same way you did
Instead of configuring in xorg.conf, I used hotplugging and an excerpt from a forum post to get the mousepad working correctly. I still have no xorg.conf. I will edit this post with the fdi file I used for the trackpad when I have my s10 with me.
I've tested the webcam, the linux-uvc-svn-all package in the aur works fine for me. The mic on the other hand looks like it needs a newer version of alsa -- http://www.linlap.com/wiki/lenovo+ideapad+s10 reports that .18a worked in ubuntu and the current package available in arch is .18. Alsa has release .19 and I quickly rebuilt the package to see if it would fix my problem but I had no luck. I probably need to rebuild more packages as well.
I have not tested the card reader but I plan on testing that when I get home tonight.
Last edited by rson451 (2009-01-30 00:36:58) -
Ideapad S405 Touch Sensitive Mouse Buttons
Hi
I have recently bought an Ideapad S405.
I have noticed that the area for left and right mouse buttons is also touch sensitive.
Because of it the mouse moves a bit whenever I press the left or the right mouse button.
This is quite a bit irritating for me.
Any solutions ??
Regards
HiteshHi Hitesh,
Welcome to Lenovo Community!
I’m sorry to hear that the touchpad buttons are sensitive and move the cursor while the buttons are pressed. Hence, I would suggest you to change the settings of “Edge Motion Region” to resolve this issue. To perform this, please perform till the 3rd step from the below link and then click on Pointer Motion> Edge Motion Region>Then set the region so that it will not affect the touchpad buttons. Please let me know the findings:
How to access Touchpad Settings?
Do post us back if the issue persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Upgraded to Windows 10 on Lenovo Ideapad p400 touch, screen went dim
Hello,I just installed the free Windows 10 upgrade on my Lenovo Ideapad p400 touch last night. I woke up this morning and booted up my computer, and everything was fine until I attempted to change the brightness. When I tried to do this, my screen went very dim, and now I can't adjust the brightness (and I can't read my screen well, either). Normally, I would install/reinstall the video driver in order to fix this problem (recommended for other users with similar issues), but I currently do not see a Windows 10 version of the driver I need on the Lenovo website.I was wondering:a) if/when a new driver would be available to install (if that's the recommended solution)b) is there something else going on?c) Windows 10 allows you to revert back to Windows 8.1 within the first month of use. Should I just do this?d) Is the p400 touch capable of running Windows 10? Why or why not?Thank you!
Hello. I also have a Lenovo Ideapad p400 touch. Screen also went dim on me. In Windows 8.1 just uninstalling graphic's driver worked. It was Control Panel, Device Manager and then Display Adapters. That doesn't work with Windows 10. The other solution of rebooting and press the increase brightness key at the Lenovo logo somewhat works but it doesn't turn the brightness all the way up. So I found this worked for me: Go here: http://support.lenovo.com/us/en/products/laptops-and-netbooks/ideapad-p-series-laptops/ideapad-p400-touch-notebook/downloads/DS031547 And just download and reinstall the old graphics driver for Windows 8. That finally got me back to maximum brightness.
-
Ideapad S405 Windows 8 and OneKey NOVO Recovery Failure
I finished working on research at the cafe this afternoon on my Lenovo Ideapad 604, came home, powered up and it is stuck in this 'Windows 8 Recovery Loop' non-sense. Turn it on, automatic recovery starts, diagnoses, fails to start windows, asks to recover or shut down, click through the Windows recovery troubleshooting menus to get to the advanced options button in order to try to boot in safemode.
This is where things get messy. On troubleshoot menu (refresh, rest, advanced options screen) if you click any of these buttons the windows recovery program freezes solid. Attempts to use the NOVO button land you indefinitely on a blank blue screen. I'm guessing the hard drive has bad sectors (explaining the freezing recovery screen) and needs to be replaced.
I've owned this laptop for less than 6 months and have no complaints. This is the first 'issue' I've ran into. I'll call support/service and let everyone know how it goes.
Options:
1) Call service. They send me a magic box and fix it at Lenovo (happened in the past with my Y510 keyboard).
2) Someone out there knows a trick to fix this issue.
3) Nuke Windows 8 and NOVO. I have WIndows 7 pro 64bit that can be loaded onto a USB.
Ideapad S405 (2013)
Ideapad Y510 (2008 - 2013)
Solved!
Go to Solution.hi Firefly2462,
Thanks for Posting,
Since the issue is kind of in the middle of a Hardware(HDD) and Software (Windows Corrupted) Issue.
i would suggest to have the system repaired by Lenovo.
Definitely they would test the HDD in their repair center,
It is understandable that the Windows OS sometimes may fail or get corrupted but together with the Onekey recovery Partition to fail? Something might be wrong with the HDD where Both are saved,
You can try doing a test on the HDD on your own before sending the machine for repair,
If the HDD test result showed up OK then you can just ask for a disk To reinstall Windows since the OKR is not working I believe they would send you one.
If the HDD Tested bad then have it repaired and have the HDD replaced.
Regarding your Windows 7 OS you will need to have your Own Product Key for Windows 7 as the one used for your windows 8 will not be compatible.
Its fine to use your own OS like Windows 7 just make sure that the HDD is good maybe do a test after installing windows 7, also take note that some portion of your warranty may be voided by changing your Windows version.
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
I recently bought the IdeaPad S405 with an AMD A6 processor, and have a couple questions about it.
1. I have seen the Lenovo Quick Start technology touted online and even in the manual for my computer, but it doesn't seem to work, and I have not found any information or software about it. What's up with it?
2. I have read in a few places that it has an extra mSATA slot. Does that allow me to install an SSD alongside the HDD, or can I only insert an SSD if I remove the HDD?
3. I know that in the official documentation it says that the S405 is limited to 4GB of RAM, but is that official or just a way to prevent people from trying to upgrade it? There are a few single-card 8GB RAMs that would fit inside, but I'm reluctant to try it. Has anyone successfully done it, and if not, what is preventing it from happening? It's surely not software, as it ships with 64-bit Windows.
Thanks for your help!Hi WindyCityRockr,
I have a S400, but I think it will be the same... I've spoken with a guy who made RAM upgrade (from 4 to 8 gb) and he told me that his S400 support 8gb; in addition he also mountend a SSD in the m-sata slot, keeping the HDD in its place.
Hope to be helpfull.
Francesco -
Will Tablet case with combined keyboard work on Lenovo Ideapad A1 07
Hi All,
Sorry if anyone has asked before but couldn't find specific.
My wife has recently purchased a Lenovo Ideapad A1 07 for its size, a friend who has a small android tablet also recommended to her, to buy a tablet case with combined keyboard with USB connection from amazon. When received the connection obviously doesn't fit, so I started searching around web for an adapter for it, but I’m seeing conflicting info that the ideapad either does/doesn't support USB data transfer connection point, so before buying an adapter what is correct!.
Can anyone throw some light onto whether Lenovo will update the firmware to be able to use USB at any time or has anyone have a work around. Any help and advice to get this keyboard working would be grateful as the tablet is a great little device for her.
GazzatafIf you are patient, go through the reviews of a specific USB keyboard that was suggested as an addition for Lenovo A1 by Amazon: You will see that even though users have tried different cables and adapters, no A1 user has managed to get this working on his tablet.
This issue may be solved by a future upgrade (if any), which will enable the USB OTG feature of the microUSB port of the A1 tablet. Until then, nothing can be done in order to have any USB device identified and working with A1. I really hope that I make a mistake here and that someone will come up with a working soultion for this issue ... -
Problem with sound in lenovo ideapad u 350
I have a problem with the sound in a lenovo ideapad U 350. When i am speeking to skype or when am listening music from youtube the sound is going in mute but the sound icon in the mixer is going up and down with the green colour like the sound is on...can someone help me?
@unick,
Have you tried doing a factory restore? Did you have this issue when you first have the laptop? I understand you wrote that this issue came after 2 weeks? Is there any antivirus software which you have installed? Appreciate if you could try a factory recovery first if you haven't done so.
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD
Maybe you are looking for
-
Albums disappeared (Elements 11 under Windows 7) - how to search/retrieve?
Completely frustrated, started to rearrange my photos into Albums after the functionality to sort after file name was unexplainably abolished. After having arranged 5 albums over a number of days , all of them have disappeard after start of Elements
-
Hello all, I recently installed 10.6.8 on a new SSD via usb, and after testing it for about a month and adding a few apps and files, I dropped it into a 2006 macbook pro. Previously the mbp was running 10.4x. Now, with the drive installed, when the c
-
I have a ibook that I did a clean install on. I have loaded all my software on up to 10.4; however, when I try to do a software update to get to 10.4.11 the update stops just before completion, and says connection lost. I do not believe it is a conne
-
Can't Recover using RnR after installing Windows 7 SP1
After I install Windows 7 SP1 on Lenovo T61 machine (64-bit), I can't recover using RnR 4.3 as it seems that RnR doesn't perform anything when I chick Restore on RnR while Windows is running or when I click ThinkVantage button while the computer is s
-
I am having a problem printing from firefox. the print window pops up, i click print and then I get the spinning beachball. I am using 10.4.6. its a standalone eMac with three users on the computer. Here is the twist... The Administrator can print fr