Lenovo Ideapad U430 Touch - Strange click noise at turn on

Hi guyz,
i have ordered a Lenovo Ideapad U430 Touch 1 week ago and since the first start there is a strange noise -
If you press the power button it makes a short click noise - sounds like an electrical contact is not ok.
What do you mean should i send it back and get a new one?
BR,

Hi Sendhil,
Welcome to Lenovo Community Forums!
I'm sorry to hear about your situation. I have private messaged you the details. Please let me know after checking your PM inbox.
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • Lenovo laptop u430 Touch - strange UEFI boot problem

    Hello!! I'm Javier from Argentina. I'm having a strange boot problem with my Lenovo u430 Touch and Windows 8.1 x64 configured in UEFI.
    When I power on o restart the laptop It gets stuck at lenovo logo screen and i have to press a key from the keyboard to continue booting on Windows 8.1 x64. This is really annoying.
    No hdd activity.Trying to solve the problem I reset bios to default settings, I updated to last bios available and restored Windows 8.1 with OKR but i have no luck.
    To solve this problem I configured the laptop to use legacy support, but I would that someone can help me to use again my laptop with UEFI bios settings.
    Thanks, I will appreciate your help.Javier     

    Hi Sendhil,
    Welcome to Lenovo Community Forums!
    I'm sorry to hear about your situation. I have private messaged you the details. Please let me know after checking your PM inbox.
    Do post us back for further queries.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • PXE-E61: Media Test failure, Check cable in my Lenovo Ideapad U430 Touch.

    I have bought my U430 Touch last June, 2014. Recently i am getting the "PXE-E61: Media Test failure, Check cable" error while switching on my laptop. And it does not precede any farther for booting. I have tried disabling the “Network Boot” as well but no luck. It always stuck on the same black screen error. Can you please help me on this issue.

    https://forums.lenovo.com/t5/Lenovo-3000-and-Essential/PXE-E61-Media-Test-failure-Check-cable-Lenovo...
    if that one dont help other have said reinstalling windows helped as the next thing was a driver issue causing it to fail the check
    does your device have a nova button (next to power button very small button use this to turn on the device) if you do use this and there is a factory restore there
    Thx dave
    yoga 2, lenovo b540
    3 custom gaming pc systems

  • Repair Loop after Update, Lenovo Ideapad U430 Touch

    I restarted my computer this morning and it installed an update. When it rebooted, it said there was a problem and began a diagnosing/repair loop. It came up with several options, including restarting the computer (which I did multiple times) and resetting/repairing startup. Nothing worked and it just kept looping back to the original screen. I do not want to reset my entire computer and I do not remember when (or if) I ever saved a backup copy. I just purchased this computer in February and I desperately need it for school. Please let me know what I can do!

    hi Shreenith,
    Welcome to Lenovo Community Forums!
    Try Turning on the Computer and wait till you see any sign of Windows loading, this kicks in right after the Lenovo Screen.
        Hold the Power button down to force shutdown the system.
    Repeat this step until you get a Recovery environment.
       You could get this Screen and access the System Restore.
         If that did not help you can go for Refresh PC
    Let me know your findings
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Ideapad U430 Touch - Wlan Verbindung wird ständig unterbrochen

    Hallo Zusammen,Ich habe gestern das U430 Touchpad zugeschicht bekommen.Und seit dem ersten Hochfahren habe ich imense Probleme mit der Wlan Verbindung. Nach erflogreicher Verbindung mit meinem Router werde ich nach spätestens 1-2 min immer und immer wieder rausgeworfen. In der Symbolleiste sehe ich dann nur das Wlan Zeichen mit Ausrufezeichen oder das Wlan ist garnicht vorhanden.  Mir meinem Router ist alles in Ordnung. Meine anderen Geräte haben keine Unterbrechungen.Den letzten Treiber vom 23 Jul 2013 habe ich auch breits neu installiert. Kann mir jemand vielleicht helfen? Ich verzweifle gerade. Brauche einen funktionsfähigen Computer dringdend.  Technische Daten: Router: Fritzbox 7240 (Sicherheitstyp: WPA2 / AES) Rechner: U430 Touch mit Win8

    Hallo Donald145,
    vielen Dank für deine Anfrage.
    Gehe bitte einmal wie folgt vor um das Problem zu lösen:
    Sollte das Problem nach Änderung immer noch vorhanden sein, installiere bitte einmal den LENOVO Energy Manager neu.
    Das Tool findest du unter dem folgenden Link:
    http://mobilesupport.lenovo.com/de/de/products/laptops-and-netbooks/ideapad-u-series-laptops/ideapad-u430-touch-notebook
    LENOVO Energy Management Driver for Windows.
    Schönen Gruß, Marcel
     

  • WiDi on IdeaPad U430 touch

    Hello,
    I haven't get an answer from the lenovo support yet, but I am interested in the IdeaPad U430 touch and want to know, if there is WirelessDisplay on board.
    Thanx

    I have an IdeaPad U430 Touch and I am using WIDi on it. You should make sure you update to Windows 8.1 (if it is not preloaded) and run the Windows update to get the latest graphics and WiFi drivers. I am using it with ActionTec ScreenBeam Pro Wireless Display adapter and the Netgear PTV3000.
    The Intel website below has a tool that checks if your system has the latest drivers and updates it:
    http://supportkb.intel.com/wireless/wireless-display/templates/selfservice/intelwidi/#portal/1026/ar...

  • Ideapad U430 Touch - Verarbeitungsmängel - Reparaturdauer nicht tragbar

    Hallo zusammen,
    bisher war ich beruflich und privat immer sehr zufrieden mit Lenovo.
    BISHER. Denn nachdem ich mir im November vergangenen Jahres ein Ideapad U430 Touch zugelegt habe, welches exorbitante Verarbeitungsmängel (Große Spaltmaße, verzogenes Gehäuse, Kippeln beim Tippen usw.) hatte, habe ich den großen Fehler gemacht es einzuschicken.
    Es liegt nun seit ca. 3 Wochen bei MEDION und auch auf erneute Nachfrage hin, wie lange es noch dauern würde, wurde ich immer mit "Haben Sie noch Geduld" abgespeißt. Seit 2 Tagen kommt nicht mal mehr eine Antwort. Mir wurde anfangs versprochen, dass die Reparatur maximal 10 Kalendertage betragen würde. Danach waren es auf einmal 10 Arbeitstage, vor 2 Wochen waren es auf einmal 15 Arbeitstage. UNTRAGBAR für ein Produkt jenseits der 800€. 
    Hat jemand ebenfalls solche Erfahrungen machen müssen? Was soll ich noch tun? E-Mails sind raus, Hotline angerufen, aber langsam sehe ich es einfach nicht mehr ein für ein neues Produkt Service-Kosten zu übernehmen, die durch wiederholte Hotline anrufe auftreten.
    Danke für Eure Hilfe! 

    Hallo Imijan,
    vielen Dank für deine Anfrage und ein herzliches Willkommen in der lenovo-Community.
    Wir bedauern die unangenehmen Erfahrungen, die du mit unserem technischen Support gemacht hast.
    Wir möchten deinen Vorgang gern intern prüfen. Bitte teile uns hierzu per privater Nachricht deine Kundennummerr mit.
    Danke und schöne Grüße
    Michael

  • Installing Windows 7 on Ideapad U430 Touch

    I just recently got a Lenovo Ideapad U430, and I already don't like Windows 8, which came with it. I went to install Win7 x64 Professional today. I did what I usually do whenever I reinstall Windows: I downloaded the ISO from the Microsoft website, I burned it to a usb drive using the official Microsoft tool, and went into BIOS to boot from the flash drive. However, I am unsure about how to go about actually installing it. I ran into some trouble with the partitions, but was able to shrink the Windows 8 partition and create a new 210.9GB one for win7. Unfortunately, when I went to install 7, it said that the partition could not be used since its apparently a GPT styled partition. My dad tried formatting it and some other things, but it never worked. When he looked online, all he could find was issues regarding the USB drive not being UEFI or something; it was confusing.
    My main question is whether or not its fully safe to Windows 7 on this machine. That's the main reason wanted to keep Windows 8 on there, in case 7 didn't work. So... would it be ok to fully format the harddrive and install Windows 7 clean on it? I'm mainly concerned about driver compatability and whether or not messing with the partitions will mess up the laptop in some way.

    I'm not sure about your partition issue as I'm running 8.1 but you can use the generic Intel drivers for Windows 8.x or Windows 7, depending on the OS version you're running.
    You can find them here:
    http://intel.com/p/en_US/support/detect
    Lenovo drivers are old and have bugs that have since been fixed by Intel.

  • Strange clicking noise

    Hello all. I hope someone can help me with this question.
    I have a 30g ipod that is less than a year old. I believe I purchased it last October. It has started to make a strange clicking noise when I play music.
    I tend to use it alot since I can listen to music at work. I would say that it runs for about 9 hours a day. Most of the time when it is in use, it is hooked up directly to the speakers and the battery charger.
    Has anyone else had this happen? Does anyone know what the problem is?
    Thanks for your help.
    Dakota
      Windows XP  

    Hi Dakota!
    First, have you tried resetting your iPod? To reset an iPod:
    First, toggle your iPod's "Hold" switch back and forth a couple of times (leave it on the white side of the switch).
    Then, press and hold the Menu and Select (center) buttons together for 5-10 seconds.
    You might need to attempts this quite a few times. Also, if you connect your iPod to your computer or another power source while resetting, that can be more effective.
    If resetting doesn't help, then I would suggest that you try restoring your iPod in iTunes.
    For info on restoring, see this article about it:
    Restoring Fifth Generation iPod - (iPod with video)
    -Kylene

  • How to reformat lenovo ideapad s410p Touch (from windows 8 - windows 7)

    hi guys, pls somebody make a guide how to reformat lenovo ideapad s410p Touch . thanks

    You should be able to get Win 7 Pro 32, as it is listed here:
    LINK
    So speak to Lenovo indeed ...
    Disclaimer: While I do work for Lenovo Partner, all my contributions are my personal, non-official and not that of Lenovo or my employer.

  • Ideapad U430 Touch gibt störende Geräusche von sich

    Hallo,
    ich bin seit gestern stolzer Besitzer des Ideapads U430 Touch. Leider gibt das Notebook ein hochfrequentes unregelmäßiges Sirren bzw. Surren ab. Das Geräusch scheint seinen Ursprung ca. unter dem Power-Button zu haben. Es klingt so ähnlich wie das Geräusch einer arbeitenden Festplatte. Das schließe ich aber aus, da es zu laut ist und auch auftritt, wenn die Festplatte nicht arbeitet. Wenn ich die Displayhelligkeit ganz abdunkle oder auf maximale Helligkeit stelle, wird sirren etwas leiser. Ist der Bildschirm aus, ist auch das Sirren verschwunden. Das Geräusch tritt außerdem nur auf, wenn das Netzteil eingesteckt ist und der Akku nicht läd.
    Die Lautsprechen fangen außerdem schon bei mittlerer Lautstärke an stark zu verzerren.
    Die entspannte Benutzung des Notebooks ist in ruhiger Umgebung quasi nicht möglich. Ist eine Behebung des Problems nötig oder ist das Gerät ein Garantiefall?

    Hallo ntp,
    vielen Dank für Dein Feedback.
    Bitte wende Dich an unseren technischen Service, da das Geräusche aus dem Notebook nicht normal ist.
    Lüfter und HDD geben stetig Geräusche ab.
    Andere Geräusche sind nicht normal und der Sachverhalt sollte abgeklärt werden.
    Die Rufnummer vom Service lautet: 01805 / 366 869 (0,14 €/Min. aus dem dt. Festnetz,  Mobilfunk max. 0,42 €/Min. / Montag bis Freitag zwischen 9 und 18 Uhr)
    Schöne Grüße, Marcel
    → Wenn Du eine Lösung auf Deine Frage erhalten hast, markiere diese bitte als gelöst - Hilfreiche Beiträge verdienen Kudos. Zögere nicht Kudos zu vergeben.   

  • Upgraded to Windows 10 on Lenovo Ideapad p400 touch, screen went dim

    Hello,I just installed the free Windows 10 upgrade on my Lenovo Ideapad p400 touch last night.  I woke up this morning and booted up my computer, and everything was fine until I attempted to change the brightness.  When I tried to do this, my screen went very dim, and now I can't adjust the brightness (and I can't read my screen well, either).  Normally, I would install/reinstall the video driver in order to fix this problem (recommended for other users with similar issues), but I currently do not see a Windows 10 version of the driver I need on the Lenovo website.I was wondering:a) if/when a new driver would be available to install (if that's the recommended solution)b) is there something else going on?c) Windows 10 allows you to revert back to Windows 8.1 within the first month of use.  Should I just do this?d) Is the p400 touch capable of running Windows 10? Why or why not?Thank you!

    Hello.  I also have a Lenovo Ideapad p400 touch.  Screen also went dim on me. In Windows 8.1 just uninstalling graphic's driver worked.  It was Control Panel, Device Manager and then Display Adapters.  That doesn't work with Windows 10. The other solution of rebooting and press the increase brightness key at the Lenovo logo somewhat works but it doesn't turn the brightness all the way up. So I found this worked for me: Go here:  http://support.lenovo.com/us/en/products/laptops-and-netbooks/ideapad-p-series-laptops/ideapad-p400-touch-notebook/downloads/DS031547 And just download and reinstall the old graphics driver for Windows 8.  That finally got me back to maximum brightness.

  • Lenovo Ideapad S410p Touch automatica​lly switches to Boot Menu after being idle

    Hi Everyone,
    I would just like to share this little issue I have with this new laptop I bought - I got this Lenovo Ideapad S410p touch from the Lenovo branch in SM Cubao, Philippines. This issue seems to repeat when I let my laptop stay idle, it would automatically go to the boot menu. After choosing the option to boot from disk drive, or pressing ESC it just goes back to boot menu and not boot the OS. Then I would need to long press and hold the power button so I could turn it off then turn it back on. Have you guys ever had this issue? I keep getting this one and have been searching the internet/forums without fruition.
    Hope devs from Lenovo take a look at this one. Laptop is about a month old and is already acting up.

    here are some of the pics of what it goes to when it's on idle
    image removed due to serial number shown

  • My iMac makes strange clicking noises on the back of it

    It makes some random clicking noises on the back of my iMac that just irritates me alot. What is wrong with it? I purchased it like 2 months ago and I don't think it's a virus or anything. Can anyone help?
    Thank you

    Hello:
    I suggest you take the computer in for diagnosis.  Strange noises are not normal. 
    Incidentally, there are NO viruses that affect a Mac running OS X - NONE.
    Barry

  • Strange Clicking noise while starting Mac Book Pro Retina Display Late 2013

    Hello i´m very concerned about a clicking noise while starting  my mac, the sound comes from the left side, is the SSD producing  this noise ?, this machines are supposed to be very silent right? what do i do? how can claim a replacement?

    I too think it is related to body chemistry reacting with the metal or some other environmental condition. Sometimes I have fairly sewaty hands and I have corrosion on the edge of my top case. I don't really care about it. Its a tool and tools wear.
    I was told by an engineer that it is referred to as "rusty hands". I'm not sure if its high alkaline or acid, but the engineer told me I had rusty hands after I had been using a drill press for a couple of days. There was rust all over the chuck, and other parts of the drill where I had touched it.

Maybe you are looking for

  • Adobe Photoshop CS3

    Computer System Microsoft Window XP Home Edition Version 2002 Service Pack 2 Computer Intel (R) Pentium (R) D CPU 2.80GHz 2.79 GHz, 3.00 GB of Ram I am using Adobe Design Premium CS3, and it seem to always pop up the Help function after a while of us

  • TS3367 Imessage an error occurred during activation. Try again. error ipod touch?

    My ipod's imessage stopped working yesterday and it was going really slow anyway so i did a full reset to factory default and made a new apple i.d, The ipod when i try to log into facetime or Imessage states "an error occurred during activation. Try

  • Batch Change in Address Book

    I'd like to start a "smart group" for co-workers. I'd like to set it up so that if I add "contact" to notes, they will be added. But I already have 40 or so people I'd like to be in that group. Is there a way I can easily change all their cards to ha

  • 8.1.7 connectivity using database link

    I can't get my database link to work. It fails with ORA-12154: TNS:count not resolve service name I have set up an entry in tnsnames that allows me to successfully tnsping the target database and I can connect via SQL*Plus using user/password@service

  • Private interconnect fails

    hi, What happens if my Private interconnect fails (2 node RAC) due to some reason ? Thx.