Lenovo ideapad yoga 13 pci data acqusition and signal processing center for problem for windows 8

Link to picture
hi everyone,
find original w8 cd and then i installed, when i was installing
i deleted all recovery and other partition, i did not think what can i do,
but then i activated windows and installed all driver, but i taking
after all drivers it stayed
2''unknown devices''
and when i rebooted, it says, usb device not recognized'' and also
''pci data acquisition and signal processing center'' devices problem for windows 8. and touchscreen not working.
i read related for w7 same problem, but what i will do now ?
thanks.
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

hi adilsefaersan,
Welcome to Lenovo Community Forums!
By opening your Device Manager right click on one unknown device and choose properties,
>On the properties windows Click on the Details Tab, on the property drop down Choose hadware IDs
> then copy the value and post back here whats on the Value pane
Do it for all those unknown Device and Post here the Value of the hardware ids
also can you share your Windows Version and bit type so we'll knwo the correct download page for you
Thanks and Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Z600 workstation missing pci data acquisition and signal processing controller driver

I just installed Win7 Pro x86 on my Z600 workstation. It was an upgrade from WinXP Pro. In Device Manager I am missing the driver for the PCI Data Acquisition and Signal Processing Controller and Hardlock USB 1.02. Can someone assist me in finding these drivers. I looked on the Support/Drivers page for this model but couldn't find anything.
This question was solved.
View Solution.

Hi,
You might get better assistance on the HP Enterprise Business Forum since you have a professional worktsation.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

PCI Data Acquisition and Signal Processing Controller driver

I've installed win 8.1x64 on my HP Probook 450 G2 but I am missing the PCI Data Acquisition and Signal Processing Controller driver.
Can you please help?
Thanks,
Leontina
This question was solved.
View Solution.

Hi:
Please see if installing the Intel Chipset driver installs that device.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng&ProdId=816

Pci data acquisition and signal processing controller -Device software not installed

My pc shows me ,the driver software for pci data acquisition and signal processing controller is not installed on my Device manager.
Please suggest me a suitable solution.

No its not working , Give me an alternate solution.

E5-571 PCI Data Acquisition and Signal Processing Controller & SM Bus Controller

I upgraded from Windows 8.1 to Windows 10. Windows Update says that it is up-to-date. Windows Devices Manager shows a problem with two devices: PCI Data Acquisition and Signal Processing ControllerSM Bus Controller What are these devices and where do I locate the drivers for them?

That should do it. I've been pleasantly surprised by how well older drivers are working in Windows 10. I had to install Vista 64bit drivers for an ATI video card (the latest working drivers for the card) and they actually worked!

Driver needed for PCI Data Acquisition and Signal Processing Controller of HP 15- r247tu

Install the Windows 10 Intel IMEI Intel Management Engine Interface (MEI) Driverhttp://ftp.hp.com/pub/softpaq/sp69501-70000/sp69593.exe The latest version of the Intel chipset driverhttp://ftp.hp.com/pub/softpaq/sp69501-70000/sp69575.exe All Windows 10 drivers available from HP are at the following link.http://support.hp.com/us-en/drivers/selfservice/HP-15-Notebook-PC-series/7486447/model/7693973#Z7_3054ICK0KGTE30AQO5O3KA30R1

Hi: Try the chipset driver directly from Intel...the second file is the auto install file. https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility- If that driver does not install the PCI Data Acquisition and Signal Processing Controller, which the chipset driver should install, download the first file listed above (zip file). Unzip and extract the contents to its folder. Go to the device manager and click on the above device needing the driver. Click on the driver tab. Click on Update driver. Select the Browse my computer for driver software option, and browse to the unzipped driver folder. Make sure the Include Subfolders box is checked, and see if the driver installs that way. Then reboot.

Re: Device Manager - Other Device "PCI Data Acquisition and Signal Processing Controller"

I have the same problem and I am not good at PC
Can you show me , in detail , of where can I download that driver please?
Solved!
Go to Solution.

in that case, let's start over.
what OS are you using? is this under a clean installation of windows or a factory installation from lenovo? what device is missing a driver? what lead you to think you needed the above driver?
please be as specific as possible.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

T450s - pci data acquisition and signal processing controller

I am installing a fresh build of win 8.1 and I cannot seem to find this driver. Anyone know what this is?

please install Intel Chipset driver. I fixed mine with it!
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng&ProdId=816

Lenovo 14 20DM correct driver for 'Data Acquisition and Signal Processing Controller'

Hi Everyone, I am the happy owner of a new Yoga 14 20DM. A few days ago I made the decision to upgrade to Windows 10. Whilst the upgrade went smoothly I did have to install a number of drivers manually. At the moment I am stuck on trying to install the 'PCI Data Acquisition and Signal Processing Controller' (as shown below). I have tried right clicking on the device then selecting Properties > Driver (tab) > Update Driver > Search automatically for updated driver software, however doing so only shows the screen capture below! Furthermore I have searched the Lenovo support page for a suitable driver however none is available! http://support.lenovo.com/au/en/products/laptops-and-netbooks/thinkpad-yoga-series-laptops/thinkpad-yoga-14/20dm?TabName Finally I have also installed, and run, 'System Update 5' the software program available from Lenovo. However it was not able to install a correct driver for this device. I have done a little searching on this topic, and have read a couple of stories about people installing an incorrect driver for this device, and then experiencing blue screens! Can anybody suggest how I can go about locating and installing the correct driver for this device? Any help will be greatly appreciated. Kind Regards, Davo

Hi Ingemann, Ultimately I decided on the newest version of the Intel Chipset Device Software (INF Update Utility), which at this time (on the Intel website) is version 10.0.27. https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility- Interestingly enough I was presented with the message below when I ran this executable. I selected Downgrade (with some trepidation), and after rebooting was pleasantly surprised to see that the troubled device was missing from the list. I can only assume that this means the correct drivers were installed. Thanks you very much for your help. Kind Regards, David

Driver missing - PCIe Data Acquisition and Signal .....

Hello, i recently used Boot Camp to install Windows XP on my 2010 15" Macbook Pro.
All the drivers are working (so far) and i haven't encountered many problems.
However, there is one thing bugging me:
When i go into Device Manager in Windows, and look down the list of installed/uninstalled devices, there is a device called "PCIe Data Acquisition and Signal Processing Controller" which has no driver installed.
I'm PC savvy, but i have never seen this before. My guess is that one of the motherboard drivers is missing, and Boot Camp installer doesn't include that driver?
Has anyone seen/resolved this, and if so, how?
Thanks.
Kaj.

Okay, will do.
Thanks.
Also i wonder if you could help with another problem?
http://discussions.apple.com/thread.jspa?threadID=2758766&tstart=0

Lenovo Ideapad Yoga 13 Recovery Issues

I'm very disappointed from Lenovo for producing Laptop without complete recovery solution.
I mistakely formated the hard drive of Lenovo IdeaPad Yoga 13, so I lost the recovery, so I called Contact Centre and they pointed me to Jumbo Electronics Company in Abu Dhabi of which are aotherized to do services for Lenovo. I went to them to save time, and get my laptop back to the initial state of which I bought, instead of getting the original state of how I bought the laptop which was:
1. Windows 8.1 Single Language.
2. All Drivers are Installed.
3. At Start-Up, I should be getting to put in my sync account while it's preparing windows for first use.
I got the following:
1. Windows 8 Single Language installed. (Not 8.1)
2. Drivers are installed.
3. Recovery is supposed to be back.
4. Local User Account "Lenovo" was created.
OK, Skip it, it's fine. I thought about trying to do recovery to make sure of the recovery working before I do back up of it, here is what I got:
1. Windows 8 Single Language Installed (Not 8.1)
2. Not all drivers are installed (For ex. Wireless Driver which is very important for this laptop since no LAN no other connection except wireless)
So I thought they gave me the non-original recovery because of the missing drivers which was not believable to me.
I contacted "Service Centre for IdeaPad Within UAE" ended up telling me that that was the original copy of the Recovery and Yes, it does not Install the Wireless Drivers! And that he himself tried it at his side and confirms it!
Can somebody explain to me how come that I paid for recovery to recover the laptop to the initial state and I did not get the real initial state of the laptop?
How come at the service centre they don't tell me "Warning" about the wireless and that I have to download and back-up the drivers before doing the recovery of the laptop?
How come actually Lenovo produces a laptop with recovery missing drivers?
VERY DISAPPOINTING! VERY ANGRY AT LENOVO! If I CAN RETURN THE LAPTOP AND BUY FROM DIFFERENT BRAND, I WOULD DO SO!
BIOS FEATURES ARE POOR NO BOOTING FROM SD CARD AVAILABLE!
WIRELESS IS POOR IN QUALITY WHILE ITS THE ONLY AND MAIN CONNECTION FOR THE LAPTOP!
Simply you are SELLING half Quality Products, WORST RECOVERY SOLUTIONS EVER! AND EXPENSIVE FOR NOTHING!
VERY DISAPPOINTED AT LENOVO PRODUCTS FROM THE FIRST IMPRESSION OF LENOVO IDEAPAD YOGA 13!

I have the same problem. If I continually power cycle the machine (either via CTRL-ALT-DEL or the switch) combined with either plugging or unplugging it from power I can eventually get it to boot up. No idea how to fix it yet. I noticed that the fan doesnt seem to be running when it doesn't boot and it is almost like it has to "warm up" or something before it will boot to the hard drive. Any fixes would be greatly appreciated.

Lenovo IdeaPad Yoga 13-Broken Screen

Hi guys,i bought a Lenovo IdeaPad Yoga 13.Now the screen is broken and it is in the touch screen mode.How do l disable the touch screen?
Please help.

Device Manager > Human Interface Devices > HID-compliant touch screen > Disable

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

Data logger and online processing application

Dear All
My application should include both data logging and online processing threads which are synchronized. I already implemented that by means of something we call "Ring buffer" which is an array containing the data and when the data stream reach its end it start over again from first index. It works almost well but sometimes it seems that my "timed loop" which is my processing thread is a little bit ahead of my data logger thread and it makes some distortion on data stream in processing thread but of course not in data logger.
Since this type of application is very classic, we should have a kind of general prototype (example) for its implementation which provides fully synchronization between processing and logger threads so I was wondering if somebody knows where I should look into?
Best regards
Afshin

Hello Afshin,
Have a look at Software Circular Buffer in LabVIEW and Software Circular Buffer Reference Library for Multi-Channel Data Acquisition.
The latter comes with an example.
Regards,
Eirikur Runarsson
Platinum Applications Engineer
NI Denmark

My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.     Can not load the Organizer from the icon at the bottom

My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.
Can not load the Organizer from the icon at the bottom of Editor screen, from the icon on the MacBook Air dock (OS 10.10.2), nor from the file in applications located with Finder.
I have tried without success to access Organizer after turning off and on the scanner, turning off and on the computer, loading a fresh copy of PSE12 from the CD, and restoring default preferences. I have searched on line for other options but not found any.
Can you help me?

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Lenovo ideapad yoga 13 pci data acqusition and signal processing center for problem for windows 8

Similar Messages

Maybe you are looking for