Lenovo Ideapad z585, doesn't boot?
Hi, I've got quite an issue with my laptop.
So, I've had this laptop for a while, and it worked well enough, until yesterday. I had shut the lid to put it to sleep, like I always do, and came back a few hours later to find windows frozen. Like completely, no mouse movement, no indications that anything is going on, frozen.
So, I turn it off by holding the power button down for a few seconds, wait a minute, and turn it back on. It does its normal boot screen (Lenovo logo, with a circle of spinny dots near the bottom), but for much longer than it normally does, and then it goes to a boot menu.
Now, I've dealt with this kind of thing before (recently actually, on my main PC), and my first thought was somehow the bios screwed up. So, I go to the Lenovo website, only to find that their BIOS update/recovery is an exe.
To be run on the computer, inside of Windows.
What I had intended to do, was what I did to fix my main PC a bit ago: Make a USB MS-DOS boot stick, throw the BIOS update files on there, and boot from the stick (which worked). But, I don't know if that will work with an EXE, and I also don't know if this laptop will boot from it.
I had just recently re-installed a clean Windows 8.1, by the way, and I am almost certain I don't have a virus, because I have Win. Defender running (I know, I know), and this thing sees almost no action except note taking at my college and recording some gameplay through a capture card.
So, sorry for the wall of text here, but I could really use some help with this.
Thanks!
Solved!
Go to Solution.
Hi Jtpetch,
Welcome to the Forums
Is the system turning on, try to perform the power drain by disconnecting all the external devices connected to the system, shutdown the system and remove the battery and adapter. Now press and hold the power button for 30 seconds and check for the issue.
Hope this helps. Do post back if the issue persists!
Best regards,
Ashwin. S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!
Similar Messages
-
Lenovo Thinkpad T520 doesn't boot with GPT slices on FreeBSD 9-BETA3 - BIOS bug?
Hi!
I've bought a brand new Lenovo Thinkpad T520 laptop and decided to install FreeBSD 9 Beta 3 following this guide.
But when I rebooted the system, it simply doesn't boot (turns out to the BIOS boot menu).
It's even doesn't boot with default FreeBSD 9 UFS-on-GPT installation scheme through bsdInstaller
Changing BIOS (latest, 1.31) settings BIOS Startup->UEFI/Legacy Boot from "Both" to "Legacy only" has no effect. As FreeBSD AFAIK doesn't support UEFI boot, legacy boot should work picking up and starting pmbr (protected MBR record), but it doesn't.
However, FreeBSD 9 UFS-on-MBR installation (with mbr boot record and FreeBSD slice in MBR partition instead of GPT) works fine.
It seems to me that UEFI/Legacy Boot "Legacy" setting actually has no effect if 0xEE type Primary partition entry is present on disk.
First of all, has anyone installed Linux or FreeBSD with GPT partitioning scheme on latest Thinkpads?
And the second one, as I've saw similar problem on FreeBSD forum thread about T420s laptop I believe that this may be a bug in the BIOS. How can I fill the bugreport or send an e-mail to support or developers, as, obvious, phone support can consult only about Windows OS.Volker1 wrote:
I've got a suspicion that the Thinkpad bios/efi is not simply executing the first stage bootloader, but looking around on the GPT disk and then crapping its pants when it doesn't find Windows.
Right now I have a MBR-formatted harddisk in the ultrabay with the bootloader in the MBR. Once I get the bootloader off the MBR disk, I can easily continue to boot from my GPT-formatted SSD.
Yes, it seems that it's a BIOS bug at least on T520, T420s and W520 laptops. Even in "Legacy" mode first stage bootloader doesn't execute if partition type is 0xEE (GPT).
Hope Lenovo developers will fix it. They fixed something on BIOS 1.31
[Problem fixes]
- Fixed an issue where the computer might not be booted from bootloader program.
but it doesn't work for now. Pity. -
Hi,
I received my new Ideapad u450p some days ago.
The first thing I wanted to do was to get rid of this windows stuff.
So I deleted all partitions and installed Arch Linux.
Everything went fine until I rebootet my laptop.
After the Bios the screen turned black and I could only see a white cursor. Nothing happened after that.
So my bootloader doesn't load and the bios seems to try to access the deleted recovery partition.
Is there a way to avoid the bios doing this and just boot from my hdd?
Booting from cd and usb doesn't work either.
I also tried to flash my bios but I need the correct filename.
Shipping back my Lenovo is no option.
Please help me.smk wrote:
Hi,
I received my new Ideapad u450p some days ago.
The first thing I wanted to do was to get rid of this windows stuff.
So I deleted all partitions and installed Arch Linux.
Everything went fine until I rebootet my laptop.
After the Bios the screen turned black and I could only see a white cursor. Nothing happened after that.
So my bootloader doesn't load and the bios seems to try to access the deleted recovery partition.
Is there a way to avoid the bios doing this and just boot from my hdd?
Booting from cd and usb doesn't work either.
I also tried to flash my bios but I need the correct filename.
Shipping back my Lenovo is no option.
Please help me.
Take out the disk from the laptop and turn it on. If it works, the problem is the bootloader.
IPnaSh
First Spanish Community Guru - Colaborador ad honorem -
Lenovo ideapad z500 Extreme slow boot up
Hell my lenovo z500 ideapad takes 5-10 minute to boot up, but after working well. The system is fresh newer installed windows 7. I try windows 8 and 10 aswell but is same. I check the ram and hdd for any fault or error but all just fine. i really dont know whats wrong with it. Somebody can help me pls?
Hello,voI have exactly the same laptop (Z50-75 AMD FX-7500 with 8GB RAM and Seagate SSHD 1TB) and excatly the same problem. I have change the HD and install a new SSD (samsung evo 850) and the same problem.Also I try with a new install of win7 64 bits without AV and any drivers and nearly two minutes fot boot. With the original windows 8 was working fine.I suspect that this notebook works just fine with Windows 8 because of the bios, I do not want to upgrade the bios because in my other lenovo B30-50 I upgrade the bios and now I can not use windows 7 anymore. Very bad from lenovo. Juan
-
Ideapad K1 won't boot past Lenovo screen
HELP! My IdeaPad won't boot past the lenovo splash screen. Here's what happened...
It has an AOSP version of Android on it which has been running fine for over a year - never had a problem with it. Yesterday, I tried to awake it from sleep but nothing happened. So I held the power button down until it switched off. I then restarted it and got to the password screen. After entering my password it became unresponsive - it just stalled with the desktop screen on. I gave it 10 minutes but it never became responsive again.
I reset it by holding the power button again until it switched off then I switched it back on. It has never got past the Lenovo splash screen. I've tried booting it loads of times, giving it a full charge, taking the SD card out, giving it a rest, leaving it booting for the whole night...nothing has worked, same result.
I also tried connecting it to the computer and using NV-Flash to put a new image on. It seems to work okay but when it re-boots it still won't get paast the Lenovo splash screen.
I'm desperate for anyone to give me some hints and tips as to where to go from here. Any help would be greatly appreciated!Hi,
I am having a similar problem. My 3 month old ideapad u510 froze last night while surfing the internet. nothing worked as far as getting shutdown menu in windows 8 to even work (just froze), so pushed power button till it turned off. immediately afterward, tried to boot by pushing power button and it just stopped booting at lenovo screen.
i've tried to boot a few times since and sometimes i see progress thing (circle of lights...similar to status bar) going other times not. i am not sure what key it is but can get to bios screen sometimes too. was hoping there was safe mode boot in bios but doesn't appear anything thats useful so didn't change anything. it just doesn't boot to windows after exiting bios.
my hunch is that i need a bootdisk or sort. importantly, would like to avoid resetting or refreshing, etc.. until have opportunity to get data off harddrive if possible. some important stuff on there that need to get off first.
Help is very much appreciated.
Thanks,
J -
Lenovo Ideapad S410p Touch automatically switches to Boot Menu after being idle
Hi Everyone,
I would just like to share this little issue I have with this new laptop I bought - I got this Lenovo Ideapad S410p touch from the Lenovo branch in SM Cubao, Philippines. This issue seems to repeat when I let my laptop stay idle, it would automatically go to the boot menu. After choosing the option to boot from disk drive, or pressing ESC it just goes back to boot menu and not boot the OS. Then I would need to long press and hold the power button so I could turn it off then turn it back on. Have you guys ever had this issue? I keep getting this one and have been searching the internet/forums without fruition.
Hope devs from Lenovo take a look at this one. Laptop is about a month old and is already acting up.here are some of the pics of what it goes to when it's on idle
image removed due to serial number shown -
[concluded] Enabling SLI (Lenovo Ideapad y500 / dual gt 650m)
final edit:
Apparently there is no support for sli on mobile nvidia gpu. Thank you ever so much Nvidia, you willf orever hold a special place in my heart..
I've miracously gotten everything else to work. Only thing left is enabling sli, which I haven't been able to.
As far as I know, I've follow the instruction to the letter, but all I get i a black screen and a log with no particular useful information that I can find:
[ 13.106]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 13.106] X Protocol Version 11, Revision 0
[ 13.106] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 13.106] Current Operating System: Linux zarchbook 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014 x86_64
[ 13.106] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet nomodeset rcutree.rcu_idle_gp_delay=1 loglevel=3
[ 13.106] Build Date: 14 April 2014 08:39:09AM
[ 13.106]
[ 13.106] Current version of pixman: 0.32.4
[ 13.106] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.106] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.107] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 31 17:50:00 2014
[ 13.108] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.108] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13.109] (==) ServerLayout "Layout0"
[ 13.109] (**) |-->Screen "Screen0" (0)
[ 13.109] (**) | |-->Monitor "Monitor0"
[ 13.110] (**) | |-->Device "Device0"
[ 13.110] (**) |-->Input Device "Keyboard0"
[ 13.110] (**) |-->Input Device "Mouse0"
[ 13.110] (**) Option "BlankTime" "0"
[ 13.110] (==) Automatically adding devices
[ 13.110] (==) Automatically enabling devices
[ 13.110] (==) Automatically adding GPU devices
[ 13.112] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 13.112] Entry deleted from font path.
[ 13.113] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 13.113] Entry deleted from font path.
[ 13.113] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 13.114] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 13.114] Entry deleted from font path.
[ 13.114] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 13.114] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 13.114] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.114] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 13.114] (WW) Disabling Keyboard0
[ 13.114] (WW) Disabling Mouse0
[ 13.114] (II) Loader magic: 0x804c80
[ 13.114] (II) Module ABI versions:
[ 13.114] X.Org ANSI C Emulation: 0.4
[ 13.114] X.Org Video Driver: 15.0
[ 13.114] X.Org XInput driver : 20.0
[ 13.114] X.Org Server Extension : 8.0
[ 13.114] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13.114] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 13.117] (--) PCI:*(0:1:0:0) 10de:0fd1:17aa:3972 rev 161, Mem @ 0xb3000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[ 13.117] (--) PCI: (0:2:0:0) 10de:0fd1:17aa:3972 rev 161, Mem @ 0xb2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[ 13.117] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 13.117] Initializing built-in extension Generic Event Extension
[ 13.117] Initializing built-in extension SHAPE
[ 13.117] Initializing built-in extension MIT-SHM
[ 13.117] Initializing built-in extension XInputExtension
[ 13.117] Initializing built-in extension XTEST
[ 13.117] Initializing built-in extension BIG-REQUESTS
[ 13.117] Initializing built-in extension SYNC
[ 13.117] Initializing built-in extension XKEYBOARD
[ 13.118] Initializing built-in extension XC-MISC
[ 13.118] Initializing built-in extension SECURITY
[ 13.118] Initializing built-in extension XINERAMA
[ 13.118] Initializing built-in extension XFIXES
[ 13.118] Initializing built-in extension RENDER
[ 13.118] Initializing built-in extension RANDR
[ 13.118] Initializing built-in extension COMPOSITE
[ 13.118] Initializing built-in extension DAMAGE
[ 13.118] Initializing built-in extension MIT-SCREEN-SAVER
[ 13.118] Initializing built-in extension DOUBLE-BUFFER
[ 13.118] Initializing built-in extension RECORD
[ 13.118] Initializing built-in extension DPMS
[ 13.118] Initializing built-in extension Present
[ 13.118] Initializing built-in extension DRI3
[ 13.118] Initializing built-in extension X-Resource
[ 13.118] Initializing built-in extension XVideo
[ 13.118] Initializing built-in extension XVideo-MotionCompensation
[ 13.118] Initializing built-in extension XFree86-VidModeExtension
[ 13.118] Initializing built-in extension XFree86-DGA
[ 13.119] Initializing built-in extension XFree86-DRI
[ 13.119] Initializing built-in extension DRI2
[ 13.119] (II) LoadModule: "glx"
[ 13.121] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.212] (II) Module glx: vendor="NVIDIA Corporation"
[ 13.212] compiled for 4.0.2, module version = 1.0.0
[ 13.212] Module class: X.Org Server Extension
[ 13.212] (II) NVIDIA GLX Module 337.19 Tue Apr 29 19:48:33 PDT 2014
[ 13.212] Loading extension GLX
[ 13.212] (II) LoadModule: "nvidia"
[ 13.212] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 13.219] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 13.219] compiled for 4.0.2, module version = 1.0.0
[ 13.219] Module class: X.Org Video Driver
[ 13.220] (II) NVIDIA dlloader X Driver 337.19 Tue Apr 29 19:22:36 PDT 2014
[ 13.220] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 13.220] (++) using VT number 1
[ 13.221] (II) Loading sub module "fb"
[ 13.221] (II) LoadModule: "fb"
[ 13.221] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 13.222] (II) Module fb: vendor="X.Org Foundation"
[ 13.222] compiled for 1.15.1, module version = 1.0.0
[ 13.222] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.222] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 13.222] (II) Loading sub module "wfb"
[ 13.222] (II) LoadModule: "wfb"
[ 13.222] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 13.223] (II) Module wfb: vendor="X.Org Foundation"
[ 13.223] compiled for 1.15.1, module version = 1.0.0
[ 13.223] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.223] (II) Loading sub module "ramdac"
[ 13.224] (II) LoadModule: "ramdac"
[ 13.224] (II) Module "ramdac" already built-in
[ 13.237] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 13.237] (==) NVIDIA(0): RGB weight 888
[ 13.237] (==) NVIDIA(0): Default visual is TrueColor
[ 13.237] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 13.238] (**) NVIDIA(0): Option "NoLogo" "True"
[ 13.238] (**) NVIDIA(0): Option "SLI" "Auto"
[ 13.238] (**) NVIDIA(0): Option "ModeValidation" "AllowNonEdidModes"
[ 13.238] (**) NVIDIA(0): NVIDIA SLI auto-select rendering option.
[ 13.238] (**) NVIDIA(0): Option "UseEDID" "FALSE"
[ 13.238] (**) NVIDIA(0): Option "MetaModes" "1920x1080_60 +0+0 { ForceFullCompositionPipeline = On }"
[ 13.238] (**) NVIDIA(0): Enabling 2D acceleration
[ 13.238] (**) NVIDIA(0): Ignoring EDIDs
[ 17.131] (WW) NVIDIA(GPU-0): Failed to initialize the SLI configuration for the NVIDIA
[ 17.131] (WW) NVIDIA(GPU-0): graphics device PCI:1:0:0. Please see Chapter 29:
[ 17.131] (WW) NVIDIA(GPU-0): Configuring SLI and Multi-GPU FrameRendering in the README
[ 17.131] (WW) NVIDIA(GPU-0): for troubleshooting suggestions.
In the end, all that I can learn from this is that stuff don't work, not why or how to fix it. A bit annoying to be blunt.
I've been googling around for answers, but the closest thing I've come to an answer, and I do hope it isn't true, is that sli om mobile nvidia gpu is not supported under linux. I've been unable to confirm this.
I do hope you can help.
Best regards.
edit:
Just for kicks, here's my xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 337.19 (buildmeister@swio-display-x64-rhel04-03) Tue Apr 29 20:34:50 PDT 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "BlankTime" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 66.5 - 66.5
VertRefresh 59.9
ModeLine "1920x1080" 138.500 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync
Option "DPMS"
EndSection
Section "Device"
BusID "PCI:1:0:0"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "1920x1080_60 +0+0 { ForceFullCompositionPipeline = On }"
Option "NoLogo" "True"
Option "ModeValidation" "AllowNonEdidModes"
Option "UseEDID" "FALSE"
Option "SLI" "Auto"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Ya, it's a mess, but nothing particular wrong with is that I can see.
edit2:
Just in case some information is lagging, here is the nvidia compiled bug report in it's entirety:
Start of NVIDIA bug report log file. Please include this file, along
with a detailed description of your problem, when reporting a graphics
driver bug via the NVIDIA Linux forum (see devtalk.nvidia.com)
or by sending email to '[email protected]'.
nvidia-bug-report.sh Version: 17818519
Date: lør maj 31 21:11:50 CEST 2014
uname: Linux zarchbook 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014 x86_64 GNU/Linux
command line flags:
*** /etc/issue
*** ls: -rw-r--r-- 1 root root 20 2013-05-31 20:40:23.000000000 +0200 /etc/issue
Arch Linux \r (\l)
*** /var/log/nvidia-installer.log does not exist
*** /var/log/Xorg.0.log
*** ls: -rw-r--r-- 1 root zacariaz 7488 2014-05-31 21:10:38.492892729 +0200 /var/log/Xorg.0.log
[ 11.874]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 11.874] X Protocol Version 11, Revision 0
[ 11.874] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 11.875] Current Operating System: Linux zarchbook 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014 x86_64
[ 11.875] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet nomodeset rcutree.rcu_idle_gp_delay=1 loglevel=3
[ 11.875] Build Date: 14 April 2014 08:39:09AM
[ 11.875]
[ 11.875] Current version of pixman: 0.32.4
[ 11.875] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.875] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.875] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 31 21:10:34 2014
[ 11.877] (==) Using config file: "/etc/X11/xorg.conf"
[ 11.877] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 11.878] (==) ServerLayout "Layout0"
[ 11.878] (**) |-->Screen "Screen0" (0)
[ 11.878] (**) | |-->Monitor "Monitor0"
[ 11.878] (**) | |-->Device "Device0"
[ 11.878] (**) |-->Input Device "Keyboard0"
[ 11.878] (**) |-->Input Device "Mouse0"
[ 11.878] (**) Option "BlankTime" "0"
[ 11.878] (==) Automatically adding devices
[ 11.878] (==) Automatically enabling devices
[ 11.878] (==) Automatically adding GPU devices
[ 11.881] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 11.881] Entry deleted from font path.
[ 11.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 11.882] Entry deleted from font path.
[ 11.882] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 11.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 11.882] Entry deleted from font path.
[ 11.882] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 11.882] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 11.882] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11.882] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 11.882] (WW) Disabling Keyboard0
[ 11.882] (WW) Disabling Mouse0
[ 11.882] (II) Loader magic: 0x804c80
[ 11.882] (II) Module ABI versions:
[ 11.882] X.Org ANSI C Emulation: 0.4
[ 11.882] X.Org Video Driver: 15.0
[ 11.882] X.Org XInput driver : 20.0
[ 11.882] X.Org Server Extension : 8.0
[ 11.883] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 11.883] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 11.885] (--) PCI:*(0:1:0:0) 10de:0fd1:17aa:3972 rev 161, Mem @ 0xb3000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[ 11.885] (--) PCI: (0:2:0:0) 10de:0fd1:17aa:3972 rev 161, Mem @ 0xb2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[ 11.885] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 11.886] Initializing built-in extension Generic Event Extension
[ 11.886] Initializing built-in extension SHAPE
[ 11.886] Initializing built-in extension MIT-SHM
[ 11.886] Initializing built-in extension XInputExtension
[ 11.886] Initializing built-in extension XTEST
[ 11.886] Initializing built-in extension BIG-REQUESTS
[ 11.886] Initializing built-in extension SYNC
[ 11.886] Initializing built-in extension XKEYBOARD
[ 11.886] Initializing built-in extension XC-MISC
[ 11.886] Initializing built-in extension SECURITY
[ 11.886] Initializing built-in extension XINERAMA
[ 11.886] Initializing built-in extension XFIXES
[ 11.886] Initializing built-in extension RENDER
[ 11.886] Initializing built-in extension RANDR
[ 11.886] Initializing built-in extension COMPOSITE
[ 11.886] Initializing built-in extension DAMAGE
[ 11.886] Initializing built-in extension MIT-SCREEN-SAVER
[ 11.886] Initializing built-in extension DOUBLE-BUFFER
[ 11.887] Initializing built-in extension RECORD
[ 11.887] Initializing built-in extension DPMS
[ 11.887] Initializing built-in extension Present
[ 11.887] Initializing built-in extension DRI3
[ 11.887] Initializing built-in extension X-Resource
[ 11.887] Initializing built-in extension XVideo
[ 11.887] Initializing built-in extension XVideo-MotionCompensation
[ 11.887] Initializing built-in extension XFree86-VidModeExtension
[ 11.887] Initializing built-in extension XFree86-DGA
[ 11.887] Initializing built-in extension XFree86-DRI
[ 11.887] Initializing built-in extension DRI2
[ 11.887] (II) LoadModule: "glx"
[ 11.889] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11.978] (II) Module glx: vendor="NVIDIA Corporation"
[ 11.978] compiled for 4.0.2, module version = 1.0.0
[ 11.978] Module class: X.Org Server Extension
[ 11.978] (II) NVIDIA GLX Module 337.19 Tue Apr 29 19:48:33 PDT 2014
[ 11.979] Loading extension GLX
[ 11.979] (II) LoadModule: "nvidia"
[ 11.979] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 11.986] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 11.986] compiled for 4.0.2, module version = 1.0.0
[ 11.986] Module class: X.Org Video Driver
[ 11.986] (II) NVIDIA dlloader X Driver 337.19 Tue Apr 29 19:22:36 PDT 2014
[ 11.986] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 11.987] (++) using VT number 1
[ 11.988] (II) Loading sub module "fb"
[ 11.988] (II) LoadModule: "fb"
[ 11.988] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 11.989] (II) Module fb: vendor="X.Org Foundation"
[ 11.989] compiled for 1.15.1, module version = 1.0.0
[ 11.989] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.989] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 11.989] (II) Loading sub module "wfb"
[ 11.989] (II) LoadModule: "wfb"
[ 11.989] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 11.990] (II) Module wfb: vendor="X.Org Foundation"
[ 11.990] compiled for 1.15.1, module version = 1.0.0
[ 11.990] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.990] (II) Loading sub module "ramdac"
[ 11.990] (II) LoadModule: "ramdac"
[ 11.990] (II) Module "ramdac" already built-in
[ 12.004] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 12.004] (==) NVIDIA(0): RGB weight 888
[ 12.004] (==) NVIDIA(0): Default visual is TrueColor
[ 12.004] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 12.004] (**) NVIDIA(0): Option "NoLogo" "True"
[ 12.004] (**) NVIDIA(0): Option "SLI" "Auto"
[ 12.004] (**) NVIDIA(0): Option "ModeValidation" "AllowNonEdidModes"
[ 12.004] (**) NVIDIA(0): NVIDIA SLI auto-select rendering option.
[ 12.004] (**) NVIDIA(0): Option "UseEDID" "FALSE"
[ 12.004] (**) NVIDIA(0): Option "MetaModes" "1920x1080_60 +0+0 { ForceFullCompositionPipeline = On }"
[ 12.004] (**) NVIDIA(0): Enabling 2D acceleration
[ 12.004] (**) NVIDIA(0): Ignoring EDIDs
[ 15.847] (WW) NVIDIA(GPU-0): Failed to initialize the SLI configuration for the NVIDIA
[ 15.847] (WW) NVIDIA(GPU-0): graphics device PCI:1:0:0. Please see Chapter 29:
[ 15.847] (WW) NVIDIA(GPU-0): Configuring SLI and Multi-GPU FrameRendering in the README
[ 15.847] (WW) NVIDIA(GPU-0): for troubleshooting suggestions.
*** /etc/X11/xorg.conf
*** ls: -rw-r--r-- 1 root root 1733 2014-05-31 21:10:12.876322985 +0200 /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 337.19 (buildmeister@swio-display-x64-rhel04-03) Tue Apr 29 20:34:50 PDT 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "BlankTime" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 66.5 - 66.5
VertRefresh 59.9
ModeLine "1920x1080" 138.500 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync
Option "DPMS"
EndSection
Section "Device"
BusID "PCI:1:0:0"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "1920x1080_60 +0+0 { ForceFullCompositionPipeline = On }"
Option "NoLogo" "True"
Option "ModeValidation" "AllowNonEdidModes"
Option "UseEDID" "FALSE"
Option "SLI" "Auto"
SubSection "Display"
Depth 24
EndSubSection
EndSection
*** /etc/X11/xorg.conf.d/10-evdev.conf
*** ls: -rw-r--r-- 1 root root 1099 2014-04-14 10:40:04.000000000 +0200 /etc/X11/xorg.conf.d/10-evdev.conf
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev tablet catchall"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
*** /etc/X11/xorg.conf.d/10-keyboard.conf
*** ls: -rw-r--r-- 1 root root 201 2014-05-07 20:02:13.920335503 +0200 /etc/X11/xorg.conf.d/10-keyboard.conf
Section "InputClass"
Identifier "system-keyboard"
MatchIsKeyboard "on"
Option "XkbLayout" "dk"
Option "XkbModel" "pc104"
Option "XkbVariant" "qwerty"
EndSection
*** /etc/X11/xorg.conf.d/10-quirks.conf
*** ls: -rw-r--r-- 1 root root 377 2014-04-14 10:40:06.000000000 +0200 /etc/X11/xorg.conf.d/10-quirks.conf
# Collection of quirks and blacklist/whitelists for specific devices.
# Accelerometer device, posts data through ABS_X/ABS_Y, making X unusable
# http://bugs.freedesktop.org/show_bug.cgi?id=22442
Section "InputClass"
Identifier "ThinkPad HDAPS accelerometer blacklist"
MatchProduct "ThinkPad HDAPS accelerometer data"
Option "Ignore" "on"
EndSection
*** /home/zacariaz/.nvidia-settings-rc
*** ls: -rw-r--r-- 1 zacariaz users 1982 2014-05-31 20:34:36.266975242 +0200 /home/zacariaz/.nvidia-settings-rc
# /home/zacariaz/.nvidia-settings-rc
# Configuration file for nvidia-settings - the NVIDIA X Server Settings utility
# Generated on Sat May 31 20:34:36 2014
# ConfigProperties:
RcFileLocale = C
ToolTips = Yes
DisplayStatusBar = Yes
SliderTextEntries = Yes
IncludeDisplayNameInConfigFile = No
ShowQuitDialog = Yes
UpdateRulesOnProfileNameChange = Yes
Timer = PowerMizer_Monitor_(GPU_1),Yes,1000
Timer = Thermal_Monitor_(GPU_1),Yes,1000
Timer = Memory_Used_(GPU_1),Yes,3000
Timer = Memory_Used_(GPU_0),Yes,3000
Timer = Thermal_Monitor_(GPU_0),Yes,1000
Timer = PowerMizer_Monitor_(GPU_0),Yes,1000
# Attributes:
0/SyncToVBlank=1
0/LogAniso=0
0/FSAA=0
0/TextureSharpen=0
0/TextureClamping=1
0/FXAA=0
0/AllowFlipping=1
0/FSAAAppControlled=1
0/LogAnisoAppControlled=1
0/OpenGLImageSettings=3
0/FSAAAppEnhanced=0
0/XVideoSyncToDisplayID=VGA-0
[DPY:VGA-0]/Dithering=0
[DPY:VGA-0]/DitheringMode=0
[DPY:VGA-0]/DitheringDepth=0
[DPY:VGA-0]/SynchronousPaletteUpdates=0
[DPY:LVDS-0]/Dithering=0
[DPY:LVDS-0]/DitheringMode=0
[DPY:LVDS-0]/DitheringDepth=0
[DPY:LVDS-0]/SynchronousPaletteUpdates=0
[DPY:HDMI-0]/Dithering=0
[DPY:HDMI-0]/DitheringMode=0
[DPY:HDMI-0]/DitheringDepth=0
[DPY:HDMI-0]/SynchronousPaletteUpdates=0
[DPY:VGA-0]/Dithering=0
[DPY:VGA-0]/DitheringMode=0
[DPY:VGA-0]/DitheringDepth=0
[DPY:VGA-0]/SynchronousPaletteUpdates=0
[DPY:LVDS-0]/RedBrightness=0.000000
[DPY:LVDS-0]/GreenBrightness=0.000000
[DPY:LVDS-0]/BlueBrightness=0.000000
[DPY:LVDS-0]/RedContrast=0.000000
[DPY:LVDS-0]/GreenContrast=0.000000
[DPY:LVDS-0]/BlueContrast=0.000000
[DPY:LVDS-0]/RedGamma=1.000000
[DPY:LVDS-0]/GreenGamma=1.000000
[DPY:LVDS-0]/BlueGamma=1.000000
[DPY:LVDS-0]/Dithering=0
[DPY:LVDS-0]/DitheringMode=0
[DPY:LVDS-0]/DitheringDepth=0
[DPY:LVDS-0]/DigitalVibrance=0
[DPY:LVDS-0]/ColorSpace=0
[DPY:LVDS-0]/ColorRange=0
[DPY:LVDS-0]/SynchronousPaletteUpdates=0
[DPY:HDMI-0]/Dithering=0
[DPY:HDMI-0]/DitheringMode=0
[DPY:HDMI-0]/DitheringDepth=0
[DPY:HDMI-0]/SynchronousPaletteUpdates=0
*** /usr/share/nvidia/nvidia-application-profiles-337.19-rc
*** ls: -rw-r--r-- 1 root root 2310 2014-05-20 14:28:33.000000000 +0200 /usr/share/nvidia/nvidia-application-profiles-337.19-rc
# Application profiles for the NVIDIA Linux graphics driver, version 337.19
# Last modified: Tue Apr 29 19:51:54 PDT 2014
# These profiles were provided by NVIDIA and should not be modified. If you
# wish to change the defaults provided here, you can override them by creating
# custom rules in /etc/nvidia/nvidia-application-profiles-rc (which will apply
# system-wide) or, for a given user, $HOME/.nv/nvidia-application-profiles-rc
# (which will apply to that particular user). See the "APPLICATION PROFILE
# SEARCH PATH" section of the NVIDIA Linux Graphics Driver README for more
# information.
"profiles" : [
"name" : "NonConformantBlitFramebufferScissor",
"settings" : [ "GLConformantBlitFramebufferScissor", false ]
"name" : "CL1C",
"settings" : [ "0x528ab3", 1 ]
"name" : "FA0",
"settings" : [ "10572898", 0 ]
"name" : "ExactGLESVersion",
"settings" : [ "ForceRequestedESVersion", 1 ]
"name" : "BGTE",
"settings" : [ "GLAppReturnOnlyBasicGlslType", 1 ]
"rules" : [
# Work around GNOME bug 690451 (see
# https://bugzilla.gnome.org/show_bug.cgi?id=690451)
"pattern" : {
"feature" : "dso",
"matches" : "libcogl.so"
"profile" : "NonConformantBlitFramebufferScissor"
{ "pattern" : "Maya2014", "profile" : "CL1C" },
{ "pattern" : "xsi", "profile" : "CL1C" },
{ "pattern" : "HoudiniFX", "profile" : "CL1C" },
{ "pattern" : "katana", "profile" : "CL1C" },
{ "pattern" : "Autodesk Mudbox 2014 64-bit", "profile" : "CL1C" },
{ "pattern" : "octane", "profile" : "CL1C" },
{ "pattern" : "Fusion64_6.4", "profile" : "CL1C" },
{ "pattern" : "Nuke7.0", "profile" : "CL1C" },
{ "pattern" : "vray.exe", "profile" : "CL1C" },
{ "pattern" : "vray.bin", "profile" : "CL1C" },
{ "pattern" : "kwin_gles", "profile" : "FA0" },
{ "pattern" : "kwin_gles", "profile" : "ExactGLESVersion" },
{ "pattern" : "heaven_x86", "profile" : "BGTE" },
{ "pattern" : "heaven_x64", "profile" : "BGTE" }
Skipping ldd output (glxinfo not found)
/sbin/lspci -d "10de:*" -v -xxx
01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 650M] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device 3972
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at b3000000 (32-bit, non-prefetchable) [size=16M]
Memory at a0000000 (64-bit, prefetchable) [size=256M]
Memory at b0000000 (64-bit, prefetchable) [size=32M]
I/O ports at 4000 [size=128]
Expansion ROM at b4080000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Capabilities: [900] #19
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia
00: de 10 d1 0f 07 00 10 00 a1 00 00 03 10 00 80 00
10: 00 00 00 b3 0c 00 00 a0 00 00 00 00 0c 00 00 b0
20: 00 00 00 00 01 40 00 00 00 00 00 00 aa 17 72 39
30: 00 00 f8 ff 60 00 00 00 00 00 00 00 00 01 00 00
40: aa 17 72 39 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 03 00 08 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 b4 02 00 e1 8d 2c 01
80: 30 29 00 00 03 3d 45 00 43 00 81 10 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 13 00 00 00
a0: 00 00 00 00 0e 00 00 00 03 00 01 00 00 00 00 00
b0: 00 00 00 00 09 00 14 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01:00.1 Audio device: NVIDIA Corporation GK107 HDMI Audio Controller (rev a1)
Subsystem: Lenovo Device 3977
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at b4000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00: de 10 1b 0e 06 00 10 00 a1 00 03 04 10 00 80 00
10: 00 00 00 b4 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 77 39
30: 00 00 00 00 60 00 00 00 00 00 00 00 00 02 00 00
40: aa 17 77 39 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 03 00 08 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 00 02 00 e1 8d 2c 01
80: 30 29 00 00 03 3d 45 00 43 00 81 10 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 13 00 00 00
a0: 00 00 00 00 0e 00 00 00 00 00 01 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
02:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 650M] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device 3972
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at b2000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at d0000000 (64-bit, prefetchable) [size=32M]
I/O ports at 3000 [size=128]
Expansion ROM at <ignored> [disabled]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Capabilities: [900] #19
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia
00: de 10 d1 0f 07 00 10 00 a1 00 00 03 10 00 00 00
10: 00 00 00 b2 0c 00 00 c0 00 00 00 00 0c 00 00 d0
20: 00 00 00 00 01 30 00 00 00 00 00 00 aa 17 72 39
30: 00 00 f8 ff 60 00 00 00 00 00 00 00 00 01 00 00
40: aa 17 72 39 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 03 00 08 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 b4 02 00 e1 8d 2c 01
80: 10 29 00 00 03 3d 45 01 43 00 82 10 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 13 00 00 00
a0: 00 00 00 00 0e 00 00 00 03 00 01 00 00 00 00 00
b0: 00 00 00 00 09 00 14 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
/sbin/lspci -d "10b5:*" -v -xxx
/sbin/lspci -t
-[0000:00]-+-00.0
+-01.0-[01]--+-00.0
| \-00.1
+-01.1-[02]----00.0
+-14.0
+-16.0
+-1a.0
+-1b.0
+-1c.0-[03]----00.0
+-1c.1-[04]----00.0
+-1c.3-[05]--+-00.0
| +-00.2
| +-00.3
| \-00.4
+-1d.0
+-1f.0
+-1f.2
\-1f.3
/sbin/lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09)
00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0155] (rev 09)
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04)
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04)
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4)
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4)
00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4)
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04)
00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04)
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04)
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK107M [GeForce GT 650M] [10de:0fd1] (rev a1)
01:00.1 Audio device [0403]: NVIDIA Corporation GK107 HDMI Audio Controller [10de:0e1b] (rev a1)
02:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK107M [GeForce GT 650M] [10de:0fd1] (rev a1)
03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8161 Gigabit Ethernet [1969:1091] (rev 10)
04:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 2230 [8086:0888] (rev c4)
05:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2392] (rev 30)
05:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2391] (rev 30)
05:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2393] (rev 30)
05:00.4 System peripheral [0880]: JMicron Technology Corp. xD Host Controller [197b:2394] (rev 30)
/sbin/lsusb
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 8087:07da Intel Corp.
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 04f2:b331 Chicony Electronics Co., Ltd
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Skipping dmidecode output (dmidecode not found)
/sbin/modinfo nvidia | grep vermagic
vermagic: 3.14.4-1-ARCH SMP preempt mod_unload modversions
Scanning kernel log files for NVRM messages:
/var/log/messages is not readable
/var/log/kernel.log is not readable
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14.4-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.0 20140507 (prerelease) (GCC) ) #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014
[ 0.000000] Command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet nomodeset rcutree.rcu_idle_gp_delay=1 loglevel=3
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000995affff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000995b0000-0x000000009a9affff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009a9b0000-0x000000009efbefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009efbf000-0x000000009f6befff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f6bf000-0x000000009f7befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f7bf000-0x000000009f7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009f7ff000-0x000000009f7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f800000-0x000000009fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x985ad018-0x985d3057] usable ==> usable
[ 0.000000] e820: update [mem 0x98586018-0x985ac057] usable ==> usable
[ 0.000000] e820: update [mem 0x98579018-0x98585057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000087fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000098579017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000098579018-0x0000000098585057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000098585058-0x0000000098586017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000098586018-0x00000000985ac057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000985ac058-0x00000000985ad017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000985ad018-0x00000000985d3057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000985d3058-0x00000000995affff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000995b0000-0x000000009a9affff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009a9b0000-0x000000009efbefff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009efbf000-0x000000009f6befff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009f6bf000-0x000000009f7befff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000009f7bf000-0x000000009f7fefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000009f7ff000-0x000000009f7fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009f800000-0x000000009fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000045effffff] usable
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x9f7fe000 ACPI 2.0=0x9f7fe014 SMBIOS=0x9f6bef98
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x000000000006f000) (0MB)
[ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000080000) (0MB)
[ 0.000000] efi: mem05: type=3, attr=0xf, range=[0x0000000000080000-0x0000000000082000) (0MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000082000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem07: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f5b000) (15MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000001f5b000-0x000000007f857000) (2008MB)
[ 0.000000] efi: mem11: type=2, attr=0xf, range=[0x000000007f857000-0x0000000080000000) (7MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000080000000-0x00000000979c0000) (377MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x00000000979c0000-0x00000000979e0000) (0MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x00000000979e0000-0x0000000097e62000) (4MB)
[ 0.000000] efi: mem15: type=1, attr=0xf, range=[0x0000000097e62000-0x000000009821b000) (3MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x000000009821b000-0x0000000098579000) (3MB)
[ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x0000000098579000-0x00000000985d4000) (0MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000985d4000-0x00000000995b0000) (15MB)
[ 0.000000] efi: mem19: type=0, attr=0xf, range=[0x00000000995b0000-0x000000009a9b0000) (20MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x000000009a9b0000-0x000000009a9b8000) (0MB)
[ 0.000000] efi: mem21: type=2, attr=0xf, range=[0x000000009a9b8000-0x000000009a9bb000) (0MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x000000009a9bb000-0x000000009a9bc000) (0MB)
[ 0.000000] efi: mem23: type=2, attr=0xf, range=[0x000000009a9bc000-0x000000009a9bd000) (0MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x000000009a9bd000-0x000000009a9be000) (0MB)
[ 0.000000] efi: mem25: type=2, attr=0xf, range=[0x000000009a9be000-0x000000009a9bf000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x000000009a9bf000-0x000000009aba8000) (1MB)
[ 0.000000] efi: mem27: type=1, attr=0xf, range=[0x000000009aba8000-0x000000009abbf000) (0MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x000000009abbf000-0x000000009af27000) (3MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x000000009af27000-0x000000009b063000) (1MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x000000009b063000-0x000000009b064000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x000000009b064000-0x000000009c9f3000) (25MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x000000009c9f3000-0x000000009c9fb000) (0MB)
[ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x000000009c9fb000-0x000000009ca11000) (0MB)
[ 0.000000] efi: mem34: type=7, attr=0xf, range=[0x000000009ca11000-0x000000009ca12000) (0MB)
[ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x000000009ca12000-0x000000009ca1d000) (0MB)
[ 0.000000] efi: mem36: type=7, attr=0xf, range=[0x000000009ca1d000-0x000000009ca1f000) (0MB)
[ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x000000009ca1f000-0x000000009ca21000) (0MB)
[ 0.000000] efi: mem38: type=7, attr=0xf, range=[0x000000009ca21000-0x000000009ca22000) (0MB)
[ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x000000009ca22000-0x000000009ca45000) (0MB)
[ 0.000000] efi: mem40: type=7, attr=0xf, range=[0x000000009ca45000-0x000000009ca47000) (0MB)
[ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x000000009ca47000-0x000000009cd81000) (3MB)
[ 0.000000] efi: mem42: type=7, attr=0xf, range=[0x000000009cd81000-0x000000009cd82000) (0MB)
[ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x000000009cd82000-0x000000009cfa7000) (2MB)
[ 0.000000] efi: mem44: type=7, attr=0xf, range=[0x000000009cfa7000-0x000000009cfa8000) (0MB)
[ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x000000009cfa8000-0x000000009cfbf000) (0MB)
[ 0.000000] efi: mem46: type=7, attr=0xf, range=[0x000000009cfbf000-0x000000009cfc5000) (0MB)
[ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x000000009cfc5000-0x000000009cfd0000) (0MB)
[ 0.000000] efi: mem48: type=7, attr=0xf, range=[0x000000009cfd0000-0x000000009cfd2000) (0MB)
[ 0.000000] efi: mem49: type=4, attr=0xf, range=[0x000000009cfd2000-0x000000009cfe9000) (0MB)
[ 0.000000] efi: mem50: type=7, attr=0xf, range=[0x000000009cfe9000-0x000000009cfea000) (0MB)
[ 0.000000] efi: mem51: type=4, attr=0xf, range=[0x000000009cfea000-0x000000009ebbf000) (27MB)
[ 0.000000] efi: mem52: type=7, attr=0xf, range=[0x000000009ebbf000-0x000000009ec3a000) (0MB)
[ 0.000000] efi: mem53: type=3, attr=0xf, range=[0x000000009ec3a000-0x000000009efbf000) (3MB)
[ 0.000000] efi: mem54: type=5, attr=0x800000000000000f, range=[0x000000009efbf000-0x000000009f04e000) (0MB)
[ 0.000000] efi: mem55: type=6, attr=0x800000000000000f, range=[0x000000009f04e000-0x000000009f050000) (0MB)
[ 0.000000] efi: mem56: type=5, attr=0x800000000000000f, range=[0x000000009f050000-0x000000009f066000) (0MB)
[ 0.000000] efi: mem57: type=6, attr=0x800000000000000f, range=[0x000000009f066000-0x000000009f067000) (0MB)
[ 0.000000] efi: mem58: type=5, attr=0x800000000000000f, range=[0x000000009f067000-0x000000009f07f000) (0MB)
[ 0.000000] efi: mem59: type=6, attr=0x800000000000000f, range=[0x000000009f07f000-0x000000009f080000) (0MB)
[ 0.000000] efi: mem60: type=5, attr=0x800000000000000f, range=[0x000000009f080000-0x000000009f08b000) (0MB)
[ 0.000000] efi: mem61: type=6, attr=0x800000000000000f, range=[0x000000009f08b000-0x000000009f08c000) (0MB)
[ 0.000000] efi: mem62: type=5, attr=0x800000000000000f, range=[0x000000009f08c000-0x000000009f091000) (0MB)
[ 0.000000] efi: mem63: type=6, attr=0x800000000000000f, range=[0x000000009f091000-0x000000009f092000) (0MB)
[ 0.000000] efi: mem64: type=5, attr=0x800000000000000f, range=[0x000000009f092000-0x000000009f0a0000) (0MB)
[ 0.000000] efi: mem65: type=6, attr=0x800000000000000f, range=[0x000000009f0a0000-0x000000009f0a1000) (0MB)
[ 0.000000] efi: mem66: type=5, attr=0x800000000000000f, range=[0x000000009f0a1000-0x000000009f0f2000) (0MB)
[ 0.000000] efi: mem67: type=6, attr=0x800000000000000f, range=[0x000000009f0f2000-0x000000009f137000) (0MB)
[ 0.000000] efi: mem68: type=5, attr=0x800000000000000f, range=[0x000000009f137000-0x000000009f1bf000) (0MB)
[ 0.000000] efi: mem69: type=6, attr=0x800000000000000f, range=[0x000000009f1bf000-0x000000009f2bf000) (1MB)
[ 0.000000] efi: mem70: type=0, attr=0xf, range=[0x000000009f2bf000-0x000000009f6bf000) (4MB)
[ 0.000000] efi: mem71: type=10, attr=0xf, range=[0x000000009f6bf000-0x000000009f7bf000) (1MB)
[ 0.000000] efi: mem72: type=9, attr=0xf, range=[0x000000009f7bf000-0x000000009f7ff000) (0MB)
[ 0.000000] efi: mem73: type=4, attr=0xf, range=[0x000000009f7ff000-0x000000009f800000) (0MB)
[ 0.000000] efi: mem74: type=7, attr=0xf, range=[0x0000000100000000-0x000000045f000000) (13808MB)
[ 0.000000] efi: mem75: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem76: type=0, attr=0x0, range=[0x000000009f800000-0x00000000a0000000) (8MB)
[ 0.000000] efi: mem77: type=11, attr=0x8000000000000001, range=[0x00000000f0000000-0x00000000f4000000) (64MB)
[ 0.000000] efi: mem78: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb04000) (0MB)
[ 0.000000] efi: mem79: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem80: type=11, attr=0x8000000000000001, range=[0x00000000fed10000-0x00000000fed1a000) (0MB)
[ 0.000000] efi: mem81: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem82: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem83: type=11, attr=0x8000000000000000, range=[0x00000000ffb80000-0x0000000100000000) (4MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20193/INVALID, BIOS 6BCN42WW(V2.02) 02/08/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x45f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 09F800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0FF800000 mask FFF800000 write-protect
[ 0.000000] 4 base 100000000 mask F00000000 write-back
[ 0.000000] 5 base 200000000 mask E00000000 write-back
[ 0.000000] 6 base 400000000 mask F80000000 write-back
[ 0.000000] 7 base 45F000000 mask FFF000000 uncachable
[ 0.000000] 8 base 460000000 mask FE0000000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x9f800 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
[ 0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
[ 0.000000] BRK [0x01b3b000, 0x01b3bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x45ee00000-0x45effffff]
[ 0.000000] [mem 0x45ee00000-0x45effffff] page 2M
[ 0.000000] BRK [0x01b3c000, 0x01b3cfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x45c000000-0x45edfffff]
[ 0.000000] [mem 0x45c000000-0x45edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x45bffffff]
[ 0.000000] [mem 0x400000000-0x45bffffff] page 2M
[ 0.000000] BRK [0x01b3d000, 0x01b3dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x995affff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x993fffff] page 2M
[ 0.000000] [mem 0x99400000-0x995affff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9a9b0000-0x9efbefff]
[ 0.000000] [mem 0x9a9b0000-0x9a9fffff] page 4k
[ 0.000000] [mem 0x9aa00000-0x9edfffff] page 2M
[ 0.000000] [mem 0x9ee00000-0x9efbefff] page 4k
[ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9f7ff000-0x9f7fffff]
[ 0.000000] [mem 0x9f7ff000-0x9f7fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x7f857000-0x7fffffff]
[ 0.000000] ACPI: RSDP 000000009f7fe014 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 000000009f7fe210 0000AC (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 000000009f7fa000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 000000009f7ed000 009D93 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 000000009f7bb000 000040
[ 0.000000] ACPI: SLIC 000000009f7fd000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 000000009f7fc000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 000000009f7fb000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 000000009f7f9000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 000000009f7f8000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 000000009f7f7000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009f7ec000 0006FE (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 000000009f7ea000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 000000009f7e5000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 000000009f7e4000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 000000009f7e2000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 000000009f7e1000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009f7e0000 000926 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009f7df000 000B22 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009f7dc000 0010F1 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BGRT 000000009f7de000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000045effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x45effffff]
[ 0.000000] NODE_DATA [mem 0x45efea000-0x45efeefff]
[ 0.000000] [ffffea0000000000-ffffea00117fffff] PMD -> [ffff88044e600000-ffff88045e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x45effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x995affff]
[ 0.000000] node 0: [mem 0x9a9b0000-0x9efbefff]
[ 0.000000] node 0: [mem 0x9f7ff000-0x9f7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x45effffff]
[ 0.000000] On node 0 totalpages: 4180807
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 24 pages reserved
[ 0.000000] DMA zone: 3975 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10031 pages used for memmap
[ 0.000000] DMA32 zone: 641984 pages, LIFO batch:31
[ 0.000000] Normal zone: 55232 pages used for memmap
[ 0.000000] Normal zone: 3534848 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x98579000-0x98579fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x98585000-0x98585fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x98586000-0x98586fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x985ac000-0x985acfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x985ad000-0x985adfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x985d3000-0x985d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x995b0000-0x9a9affff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9efbf000-0x9f6befff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f6bf000-0x9f7befff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f7bf000-0x9f7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f800000-0x9fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
[ 0.000000] e820: [mem 0xa0000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88045ec00000 s87040 r8192 d23552 u262144
[ 0.000000] pcpu-alloc: s87040 r8192 d23552 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4115456
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet nomodeset rcutree.rcu_idle_gp_delay=1 loglevel=3
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16292016K/16723228K available (5230K kernel code, 857K rwdata, 1632K rodata, 1120K init, 1288K bss, 431212K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.558 MHz processor
[ 0.000035] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.66 BogoMIPS (lpj=7981860)
[ 0.000037] pid_max: default: 32768 minimum: 301
[ 0.000044] ACPI: Core revision 20131218
[ 0.006081] ACPI: All ACPI Tables successfully acquired
[ 0.030009] Security Framework initialized
[ 0.030016] Yama: becoming mindful.
[ 0.031004] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.035068] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.036876] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.036893] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.037118] Initializing cgroup subsys memory
[ 0.037123] Initializing cgroup subsys devices
[ 0.037125] Initializing cgroup subsys freezer
[ 0.037126] Initializing cgroup subsys net_cls
[ 0.037127] Initializing cgroup subsys blkio
[ 0.037150] CPU: Physical Processor ID: 0
[ 0.037151] CPU: Processor Core ID: 0
[ 0.037156] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.037529] mce: CPU supports 9 MCE banks
[ 0.037542] CPU0: Thermal monitoring enabled (TM1)
[ 0.037553] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 2
[ 0.037649] Freeing SMP alternatives memory: 20K (ffffffff819f0000 - ffffffff819f5000)
[ 0.041198] ftrace: allocating 20029 entries in 79 pages
[ 0.050996] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.084028] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
[ 0.084036] TSC deadline timer enabled
[ 0.084045] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.084051] ... version: 3
[ 0.084052] ... bit width: 48
[ 0.084053] ... generic registers: 4
[ 0.084054] ... value mask: 0000ffffffffffff
[ 0.084055] ... max period: 0000ffffffffffff
[ 0.084056] ... fixed-purpose events: 3
[ 0.084057] ... event mask: 000000070000000f
[ 0.110826] x86: Booting SMP configuration:
[ 0.110828] .... node #0, CPUs: #1
[ 0.124613] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.131276] #2 #3 #4 #5 #6 #7
[ 0.246855] x86: Booted up 1 node, 8 CPUs
[ 0.246859] smpboot: Total of 8 processors activated (38328.30 BogoMIPS)
[ 0.254157] devtmpfs: initialized
[ 0.257424] PM: Registering ACPI NVS region [mem 0x9f6bf000-0x9f7befff] (1048576 bytes)
[ 0.258171] pinctrl core: initialized pinctrl subsystem
[ 0.258207] RTC time: 19:11:33, date: 05/31/14
[ 0.258239] NET: Registered protocol family 16
[ 0.258316] cpuidle: using governor ladder
[ 0.258318] cpuidle: using governor menu
[ 0.258361] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.258362] ACPI: bus type PCI registered
[ 0.258364] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.258425] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.258428] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.266014] PCI: Using configuration type 1 for base access
[ 0.266838] bio: create slab <bio-0> at 0
[ 0.266930] ACPI: Added _OSI(Module Device)
[ 0.266932] ACPI: Added _OSI(Processor Device)
[ 0.266933] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.266934] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.269731] ACPI: Executed 1 bTrilby wrote:
zacariaz wrote:* b u m p *
Do not do this.
If you want help, start providing relevant information beyond "it don't work". You say you followed the instructions ... which instructions? What steps did you take? It is clear from your xorg.conf that you did not follow the only instructions I could find in the archlinux wiki. Follow those instructions, and post the output of the relevant diagnostic or information-gathering steps included there.
Also if you have information which could be useful - such as which mobile devices/cards allegedly don't work - then share that. Don't keep us in the dark.
I should think that it's quite obvious that I've followed the wiki instruction, which basically is one line in xorg, as is the official nvidia instructions.
This is most likely a problem related specificlally to the gt 650m and/or the lenovo ideapad y500 (and perhaps derivatives thereof).
I do not believe I've left any information out.
Of course if I've done something wrong, I apologize and will do my best to avoid it in the future. As for the rest, I'd very much like to know which instructions I did not follow, as I've done all that I can think of and telling me that I haven't is hardly useful. As far as I aware, the wiki instructs you to ad two line in the xorg.conf, which I've done. I will of course read it again, hoping to figure out what I've apparently missed, though I've read it so many times already that I don't expect to learn anything. -
Lenovo Ideapad Yoga 13 Recovery Issues
I'm very disappointed from Lenovo for producing Laptop without complete recovery solution.
I mistakely formated the hard drive of Lenovo IdeaPad Yoga 13, so I lost the recovery, so I called Contact Centre and they pointed me to Jumbo Electronics Company in Abu Dhabi of which are aotherized to do services for Lenovo. I went to them to save time, and get my laptop back to the initial state of which I bought, instead of getting the original state of how I bought the laptop which was:
1. Windows 8.1 Single Language.
2. All Drivers are Installed.
3. At Start-Up, I should be getting to put in my sync account while it's preparing windows for first use.
I got the following:
1. Windows 8 Single Language installed. (Not 8.1)
2. Drivers are installed.
3. Recovery is supposed to be back.
4. Local User Account "Lenovo" was created.
OK, Skip it, it's fine. I thought about trying to do recovery to make sure of the recovery working before I do back up of it, here is what I got:
1. Windows 8 Single Language Installed (Not 8.1)
2. Not all drivers are installed (For ex. Wireless Driver which is very important for this laptop since no LAN no other connection except wireless)
So I thought they gave me the non-original recovery because of the missing drivers which was not believable to me.
I contacted "Service Centre for IdeaPad Within UAE" ended up telling me that that was the original copy of the Recovery and Yes, it does not Install the Wireless Drivers! And that he himself tried it at his side and confirms it!
Can somebody explain to me how come that I paid for recovery to recover the laptop to the initial state and I did not get the real initial state of the laptop?
How come at the service centre they don't tell me "Warning" about the wireless and that I have to download and back-up the drivers before doing the recovery of the laptop?
How come actually Lenovo produces a laptop with recovery missing drivers?
VERY DISAPPOINTING! VERY ANGRY AT LENOVO! If I CAN RETURN THE LAPTOP AND BUY FROM DIFFERENT BRAND, I WOULD DO SO!
BIOS FEATURES ARE POOR NO BOOTING FROM SD CARD AVAILABLE!
WIRELESS IS POOR IN QUALITY WHILE ITS THE ONLY AND MAIN CONNECTION FOR THE LAPTOP!
Simply you are SELLING half Quality Products, WORST RECOVERY SOLUTIONS EVER! AND EXPENSIVE FOR NOTHING!
VERY DISAPPOINTED AT LENOVO PRODUCTS FROM THE FIRST IMPRESSION OF LENOVO IDEAPAD YOGA 13!I have the same problem. If I continually power cycle the machine (either via CTRL-ALT-DEL or the switch) combined with either plugging or unplugging it from power I can eventually get it to boot up. No idea how to fix it yet. I noticed that the fan doesnt seem to be running when it doesn't boot and it is almost like it has to "warm up" or something before it will boot to the hard drive. Any fixes would be greatly appreciated.
-
Installation of Lenovo IdeaPad U450p M23L4GE
I finally received my new Lenovo IdeaPad U450p M23L4GE.
When I tried to install Archlinux the partitioning didn't work.
The output of Auto-Prepare is "Device '/boot :32:ext2:+ swap:256:swap /:*:ext3' is not valid"
When I try to partition my disk manually I can't find the proper diskname.
/dev/sda-d nor /dev/hda-d work.
The directory /dev contains the following files/directories:
console
full
ide/
ieee1394/
input/
kmem
kmsg
loop/
mapper/
md/
md0 -> md/0
mem
misc/
null
port
ptmx
pts/
pty/
random
rd/
root.old -> rd/0
scsi/
shm/
tty
urandom
usb/
vc/
vcc/
video1394/
zero
Any suggestions?
Last edited by smk (2010-09-19 20:24:33)I solved the problem with a newer install disc
It's sda now.
I finished the installation succesfully and also installed grub.
But after the bios was started I can only see a white cursor and arch doesn't boot.
After some research it seems that my notebook doesn't boot properly without the recovery partition which I already deleted.
What can I do? I didn't create any recovery cds and the partition is gone.
Last edited by smk (2010-09-20 08:55:13) -
Need help with installing Ubuntu on Lenovo Ideapad Z500.
I just bought a new Lenovo Ideapad Z500 yesterday. It came with Windows 8 pre-installed. Now, I also want to install Ubuntu over it. The disk is partitioned as follows:
Disk C: - 880 GB (approx)
Disk D: - 30 GB (approx) (I don't remember exact partition, as my laptop is currently at my home).
Then I thought, I would better re-partition the C drive into 1 or 2 small drives. So, I shrinked the C drive by going into "Disk Management", and then created 3 more partitions - 240 GB * 2, 300 GB * 1, and left the C drive with 100 GB space. I didn't modified the D drive.
Till then I didn't went through any infomation over internet. But, now when I went through this forum, I found out that my OKR won't work now, that I still have to confirm when I go home. So, now I'm worried. I scanned through so many post here, and no where found a way to install Ubuntu on Ideapad Z500.
I also read that it will be possible to run OKR, if I can re-store the partition to it's original. I think this can be done, since I just have to remove the volume I created, and allocate the memory back to C drive. And it will be back to original state, as I didn't modify D drive (correct me if am wrong, or if it can't happen).
So, the major question that I want to ask is, is there no way to partition my disk, and install Ubuntu in one of them.hi rohitjain-rj,
Welcome to the Lenovo Forums.
On a Z400 Touch running on Windows 8 preload, shrinking the the C-Drive under Disk Management and creating multiple partitions on the unallocated space and then reverting the partition back to original made the One Key Recovery work as normal - haven't tested this yet on the Z500 as there's no available unit but chances are, it may also work.
In installing Ubuntu, have you tried to install Ubuntu via Wubi ?
If Ubuntu doesn't start, boot into the BIOS (press the OKR button > select BIOS Setup Utility) and set the following:
Boot Tab
Boot Mode - Legacy Support
Boot Priority - Legacy First
Exit Tab
OS Optimized Defaults - Other OS
Regards.
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Lenovo IdeaPad U410 - PowerButton Flashing LED
I have removed Battery and CMOS battery to trouble shoot this U410 which often will not POST.
If I plug in the AC power supply I press the power button very briefly it flashes on and off a few times.
Press to turn off then press again and it comes on and stays on, then it WILL POST and I get the expected:
CMOS battery failure
FI to continue, F2 to enter set up…..
F1 and it boots normally into Windows 7 but of course the date and time are way off…..
Can someone tell me what is happeneing when the Power Button LED flashes on and off?? Whatever it is..it is clearing the block to this thing POSTing..will always POST after this...That really doesn't indicate much of anything as there are no light error codes for your model. The light is just an indication that the machine is trying to boot up before shutting down.
You might try stripping all the hardware out of the laptop and then see if the boot up is any different with and without the CMOS battery installed. Remove the hard drive, optical drive, wireless card and bluetooth if it is installed. If you have more than one memory module try them one at a time and in different slots.
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance. -
Upgraded to Windows 10 on Lenovo Ideapad p400 touch, screen went dim
Hello,I just installed the free Windows 10 upgrade on my Lenovo Ideapad p400 touch last night. I woke up this morning and booted up my computer, and everything was fine until I attempted to change the brightness. When I tried to do this, my screen went very dim, and now I can't adjust the brightness (and I can't read my screen well, either). Normally, I would install/reinstall the video driver in order to fix this problem (recommended for other users with similar issues), but I currently do not see a Windows 10 version of the driver I need on the Lenovo website.I was wondering:a) if/when a new driver would be available to install (if that's the recommended solution)b) is there something else going on?c) Windows 10 allows you to revert back to Windows 8.1 within the first month of use. Should I just do this?d) Is the p400 touch capable of running Windows 10? Why or why not?Thank you!
Hello. I also have a Lenovo Ideapad p400 touch. Screen also went dim on me. In Windows 8.1 just uninstalling graphic's driver worked. It was Control Panel, Device Manager and then Display Adapters. That doesn't work with Windows 10. The other solution of rebooting and press the increase brightness key at the Lenovo logo somewhat works but it doesn't turn the brightness all the way up. So I found this worked for me: Go here: http://support.lenovo.com/us/en/products/laptops-and-netbooks/ideapad-p-series-laptops/ideapad-p400-touch-notebook/downloads/DS031547 And just download and reinstall the old graphics driver for Windows 8. That finally got me back to maximum brightness.
-
Lenovo ideapad s400 startup problem
i have lenovo ideapad s400 with windows7 was working good, but now its hanging Starting Windows please help
hi kuraysi,
Welcome to the Lenovo Forums.
Just to check, if you boot in Safe Mode, are you able to load Windows? If booting to Safe Mode works, perform a clean boot and observe. This will isolate any possible 3rd party software that might be inteferring with the Windows startup.
If that doesn't work and Windows is hanging up on the loading screen then we're probably looking at a corrupted Windows file or a bad hardware. In this case, you may need to:
1. Reload the system via the OneKey Recovery (note that all ways on the OS partition will be wiped)
2. If reloading Windows doesn't work or the machine freezes up then you're prolly looking at a bad hardware (possibly the HDD).
Let me know how it goes.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Problems with Lenovo Ideapad y510p
Hi, I got my new Lenovo Ideapad y510p for a month ago, and three weeks after it started acting wierd by having a slow startup and sometimes it just had black screen when it was starting up. Sometimes I have to hold down the power and try several times to turn on the computer. When it do start up, at the begining (after the lenovo logo) it makes some black screen switching (not sure if it correct way to describe it), and then it take ages for it to get on the login screen, and get on desktop, its like it doesn't have an SDD. Any help?
Solved!
Go to Solution.Hi Zenadbeg,
Welcome to Lenovo Community Forums!
I’m sorry to hear that your Y510p laptop is not working as expected and takes long time to boot into Windows, below are the steps to check and resolve the issue in the computer:
Remove the battery and any other peripheral device connected to the computer.
Hold the power button for 10-15 seconds and then connect only the AC Adapter and try to turn ON the computer.
If the issue persists even after performing Flee Power then resetting BIOS to its defaults should resolve the issue
To access the BIOS menu click the NOVO button which at the left-hand side of the computer next to AC power adapter jack.
Then to reset the BIOS to its defaults click on “F9” Key and select YES.
Now Click on “F10” Key to safe the changes that are done in BIOS, restart the computer and check if the issue is resolved.
Hope this helps!!!
Do post us back if the issue persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Will Tablet case with combined keyboard work on Lenovo Ideapad A1 07
Hi All,
Sorry if anyone has asked before but couldn't find specific.
My wife has recently purchased a Lenovo Ideapad A1 07 for its size, a friend who has a small android tablet also recommended to her, to buy a tablet case with combined keyboard with USB connection from amazon. When received the connection obviously doesn't fit, so I started searching around web for an adapter for it, but I’m seeing conflicting info that the ideapad either does/doesn't support USB data transfer connection point, so before buying an adapter what is correct!.
Can anyone throw some light onto whether Lenovo will update the firmware to be able to use USB at any time or has anyone have a work around. Any help and advice to get this keyboard working would be grateful as the tablet is a great little device for her.
GazzatafIf you are patient, go through the reviews of a specific USB keyboard that was suggested as an addition for Lenovo A1 by Amazon: You will see that even though users have tried different cables and adapters, no A1 user has managed to get this working on his tablet.
This issue may be solved by a future upgrade (if any), which will enable the USB OTG feature of the microUSB port of the A1 tablet. Until then, nothing can be done in order to have any USB device identified and working with A1. I really hope that I make a mistake here and that someone will come up with a working soultion for this issue ...
Maybe you are looking for
-
Hi Experts, Need a solution regarding broadcast. There were lot of packet loss when i tired to ping inside interface of firewall.And my entire network was down. When i checked in asdm there was DOS attack from particular ip on of internal server .
-
CS 5.5 Installation Issues on Mac
I have recently had to reinstall Lion 10.7.4 on my imac due a catastrophic failure. I am now reinstalling software and have had no problems except with CS 5.5. Illustrator and InDesign will not install but everything else (photoshop, bridge etc) are
-
Af:query : Delete duplicate records from results manually
Hi I have an ADF page with af:quey on a view object. I have created a viewcriteria to choose few attributes from the view object. The view object is created manually using a sql query, where the query has joins to various other tables (it has outer
-
Custom Fields notification header
Hi Everyone, I have a lot of custom fields that I want to add at the header level of a general notification. Is there any way that I can leverage the classification system to do that? Is it possible to create a custom class type or something and have
-
Hey guys, I've noticed a recent problem with my Mail.app program after disconnecting it from an external monitor while having the macbook in clamshell mode. I've got a screen recording I took that shows exactly what happens after I disconnect my moni