Lenovo K 900 --Battery charge indicator always shows 100 %

A strange issue after firmware upgrade in lenovo K 900 , When I charged to 100 % , the phone always shows 100 % charge . It is not getting updated and after using for 6-7 hrs the phone gets switched off without any notice . Now I can charge again and this time the battery charge indicator shows correctly . but again the same issue is seen if the phone is charged to 100 % .

Let it die all the way down, to recalibrate the battery, and then fully recharge. See if that helps.

Similar Messages

Dropped MacBook Pro i5 Mid 2012 Fan tries to spin but cuts out, Battery Charging Indicator light showing but cuts out

Good evening,
A few weeks ago i dropped my MacBook Pro (i5 Mid 2012) and it failed to turn on, battery had charge in it at the time.
When i press the power button nothing happens. I have also tried resetting the SMC, nothing happens.
Next i plugged in the mag safe charger, before i pressed the power button i saw the charging light come on for a second then cut out.
If i press the power buttong, nothing happens.
I opened the back of the machine and tried the above steps again to see what happened.
1. When i press the power button nothing happens.
2. When i plugged in the mag safe charger, before ti pressed the power button i see the fan starts to spin for maybe 2 seconds then stops. I hear the hard drive start to spin but that also stops at the same time, during this the front batter charging indicator light also illuminates, but also cuts out.
Its like when you attach the charger it wants to do something but stops everything after 2 seconds. I left it plugged in for maybe 1 min and its just repeated this action maybe 20 times.
At no stage when i press the power buttong, plugged in or not does it react.
I have taken out the hard drive and plugged into another manchine as an external drive and it works perfectly. Hard drive is no problem! From what i can see all connections are ok, and appear to be plugged in correctly, no burn marks or damage visible.
Logic board failure from impact?
Thanks,
Gary

Wouldn't this be better in the Macbook Pro forum than the Pages forum:
https://discussions.apple.com/community/notebooks/macbook_pro
Peter

OS v2.2 Battery indicator always shows full until device dies.

After I upgraded to version 2.2 of the OS on my iPhone 3G, my battery indicator is always showing 100% charge. After a full day of normal usage, the iPhone just died with a dead battery. I didn't even get the usual warning when the battery was at 20%.
Has anyone else experienced this problem?

That problem has been around for a while. If you now give it a full charge, you will (most likely) have solved the problem. It sort of fixes itself most of the time simply by running the phone down all the way, then recharging all the way.
It calibrates the charge measuring circuit.
Post back if it persists.

Battery Charging Indicator Light Is Out

I own a tangerine iBook, OS X 10.4 operating system.
For a year or so charging the battery while the power cord in has been a "fussy" project -- sometimes it wouldn't charge until I moved the "plug-in-to-the-computer" end of the cord out ever so slightly. I bought a new power cord, but that didn't change things.
I don't have internet at hom, so most days I take my laptop and power cord to the public library and use the library's WiFi to look for work. Yesterday I came home, plugged in the power cord, and no battery charging light. I "jiggled" the cord, got out the old power cord and tried that one, then I tried a different electrical outlet. No battery charging indicator light, and the battery is discharging while I use it with the power cord.
I'm assuming this is an electrical problem that I can't fix, but can anyone fix it? When the battery runs out, will the iBook keep running when plugged into an electircal outlet, or is the electricity not getting to where it need to be?
I've had problems with the battery not charging before, and once I was advised to reset something, but I've alway had the indicator light on, so now I don't know if power is getting to my computer.
I went to About This Computer, clicked on Power and saw this:
AC Charger Information:
AC Charger (Watts):    0
Connected:    No
Charging:    No
which looks like it doesn't think I'm connected to any power source.

Yes, if resetting the PMU doesn't work, it does sound like the DC-in board has failed.
It is not an easy repair (especially for someone who describes herself as "NonTech."
http://www.ifixit.com/Guide/Installing-iBook-G3-Clamshell-DC-In-Board/114/1
Not exactly cheap, either:
http://www.ifixit.com/iBook-Parts/iBook-Clamshell-DC-In-Board/IF149-023?utm_medi um=frame_module_bottom&utm_term=ibook_g3_clamshell&utm_source=ifixit_guide&utm_c ontent=related_products

Why my iphone4s not charging?always showing 1% even if i charge it whole day

Hi i really need help, my phone is not charging, there are times that it wasnt charging, its always showed 1% only even if i charge it whole day. but when i turn it off and let it rest for 1-2 days, and when i turn it on after resting it for 1-2 days it was fully charge or sometimes it is 97%. i bring it on the store where i bought it and use the warranty, they were saying that they cannot see any problem on my phone because they saw that it was charging. anyone could help me for this matter please? im a new iphone user and it was so disappointing that im encountering this problem for a short period of time.,i'm just using it for more than 5months only. i really appreciate if someone can hep me with this,, thank you very much...

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
I was experiencing a similar issue where the battery percentage was not updating on my device unless I reset or rebooted the device and it would not acknowledge being plugged in. The only thing that resolved for me was a restore as new.

Why is the battery charger indicator white

why is the battery charger indicator white
I am unable to send text messages

You're welcome.
You're not an idiot, as the only dumb questions are those not asked .

My mac wireless keyboard always shows 100-percent charge when its not

How do I allow my iMac to correctly show the battery level of my Mac wireless keyboard?
It always shows 100-percent, which is wrong most of the time.
It reads and shows my Mac wireless mouse battery level correctly.

It's a bug.

My iPad 3 always shows 100% battery

My iPad 3 always shows 100% battery and suddenly it gets off post complete discharge.

First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.

Magic Mouse battery always shows 100%

Since upgrading to Mac 10.6.7, The preference window for the magic mouse always shows 100%.
After installing MagicPrefs free drivers, (because Apples' sensitivity settings suck), MagicPrefs show
a more accurate level of 84%. What gives here Apple? Are you letting the competition beat you at
your own game? I'm getting disgusted with Apple's lack of support, fixes and updates to reported problems.

From my troubleshooting, it seems it's specific to the individual mouse.
I have two Magic Mice on my desk, one for a MB Pro and one for an iMac. The "trouble" Magic Mouse, which always shows "100%" AND frequently disconnects, did so in 10.6 and 10.7. on my MB Pro.
I thought maybe the Bluetooth module on my MB Pro was bunk--so I swapped mice and took the "stable" Magic Mouse on the iMac and paired it with my MB Pro--no problems. The "trouble" Magic Mouse, formerly on the MB Pro, now on the iMac--exhibits the exact same problems--it seems to be the specific mouse, not the OS or Bluetooth modules on either host computer. Hope this helps. I guess I'll be making a trip to the Apple Store to see if they can fix/replace my "trouble" Magic Mouse...

Macbook pro 17" 3g battery status indicator stuck on 100%

Battery status indicator stuck on 100% Worked normaly until today
resetting smc does not help
Battery Information:
Model Information:
Serial Number:          9G95201YS4M0A
Manufacturer:          DP
Device name:          bq20z951
Pack Lot Code:          0000
PCB Lot Code:          0000
Firmware Version:          0042
Hardware Revision:          0001
Cell Revision:          0119
Charge Information:
Charge remaining (mAh):          65262
Fully charged:          Yes
Charging:          No
Full charge capacity (mAh):          65262
Health Information:
Cycle count:          221
Condition:          Replace Now
Battery Installed:          Yes
Amperage (mA):          -1629
Voltage (mV):          8072

I closed the lid for about 10 minutes to do something and when I came back the status seemed to be working correctly (80%) and the health now seems normal. I made no other changes. I will keep an eye on it and post if it goes haywire again. Thanks for your help
Battery Information:
Model Information:
Serial Number:          9G95201YS4M0A
Manufacturer:          DP
Device name:          bq20z951
Pack Lot Code:          0000
PCB Lot Code:          0000
Firmware Version:          0042
Hardware Revision:          0001
Cell Revision:          0119
Charge Information:
Charge remaining (mAh):          9833
Fully charged:          No
Charging:          No
Full charge capacity (mAh):          12217
Health Information:
Cycle count:          221
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          -1550
Voltage (mV):          7930

My PSAPTEMP tablespace always show 100% Full or Used

Dear All ,
Using brtools my tablespace PSAPTEMP always show 100% full or Used, I extend 2 Gb size in PSAPTEMP tablespace but still no solution
Please guide me why it always shows 100% used and what is the performance impact on that
Regards
Shahid

Hello Shahid,
> Please guide me why it always shows 100% used and what is the performance impact on that
This is a normal behaviour in case of a temporary tablespace.
If you do sorts, hash-joins, etc. which can not be done in memory-only you allocate extents in the temporary tablespace. If you finish your query, that temporary extents will be marked as free but they still kept allocated. So over the uptime of your database your temporary tablespace will be filled by allocated (but marked as free) extents .. and so you will see it as "full". You can also check the current "real" usage of your temporary tablespace by the view V$TEMPSEG_USAGE:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/dynviews_2164.htm#i1421319
The temporary extents will be deallocated by a database shutdown or by a database start, if the database crashed before.
If you don't get any ORA-01652 by your query .. everything is fine.
Regards
Stefan

Battery charged indicator on iPhone vs iTunes

hey guys:
i'm curious if anyone else has noticed the same thing as i have. when i plug my iPhone into my computer to charge, i will see the battery full indicator on the iPhone before i see it on iTunes. (by full indicator, i mean the little plug icon in the battery meter at the upper right side of the screen.) i've left my iPhone charging a number of times, but iTunes will not show that the battery is fully charged.
Edit - while i was writing this, i looked at my iTunes to see if there were any new podcasts, and low and behold, the charging icon in iTunes changed to the little plug icon as well.
anyone have an idea why this is happening?
peace

Probably just a delay after the USB connection is established, just as my iPhone isn't immediately available in the iTunes source list the second after it is connected - there is a slight delay.
Nothing I've ever paid any attention to, and something I don't think you need to be concerned about.

Battery charge is not showing correctly in Lion

Hi Guys.
Quick question, my new macbook Mid 2010 laptop is not showing the correct charge, It is showing 96% charged and the MagSafe is showing Green.
I have reset the SMC and PRAM with no effect. do you think the battery needs replacing?
I did full discharge the battery and recharged it, it was charge to the full 100% and in system info it is saying that the battery is normal.
I shutdown the laptop and the next morning it is showing 96% again Magsafe connected and not charging.
Is this a Bug in Lion? or does the battery really need changing?
I am going to the Genius bar tomorrow at my Local Apple store for memory upgrade.
Thanks

well I never knew that!
Thanks again.

Battery Charging icon not showing up in iTunes

I have a brand new iPod Classic 120GB. My wife has an iPod Nano 3rd Gen 4GB. When she connects her Nano to my MacBook Pro (Leopard w/iTunes 8), she has a little battery charging icon next to the sync and eject icons in iTunes. However when i connect my iPod Classic 120GB i don't have it. I would assume my software would be identical OR newer. I have version 2.0 and she has version 1.1.3, both Mac formatted.
This isn't a major deal, but i kinda like that icon and i'm just curious why it's not showing with my newer one. I've try both her and my sync cables, both work fine and don't change a thing icon wise.

Looks like this issue is resolved in the latest Classic software update 2.0.1. I now have my battery charging icon.

Why doesn't my battery charging indicator shown during charging?

Hoping somebody can help. Ever since the install of IOS 6 when I plug in my iPad I hear the sound the when the attempt to charge is recognized. It the indicator no longer shows on the screen.
Thx

The charging indicator shows on my iPad running iOS 6.
Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off".

Lenovo K 900 --Battery charge indicator always shows 100 %

Similar Messages

Maybe you are looking for