Lenovo K1 rebooting at lenovo screen - Please HELP!!
After OTA update, K1 does not go beyond lenovo screen, keeps rebooting.
Assuming some files might have been corrupted, tried the "rooting method" . I have tried different method of rooting - eg. windoze, k1-v2 etc. All of them shows it goes thru formatting, then uploading some files, no errors. Then it reboots. And same thing happens, it keeps rebooting after at the lenovo screen.
Can some one please help trouble shooting this K1. What am I doing wrong? What else can be tried?
Really appreciate any help and suggestiom.
Thanks in advance.
I used my new K1 for couple of weeks which I bought in December 2011. After last update it worked for a day or two and then suddenly it went to the loop of restarting at Lenovo/Nividia logos. Not moving any further.
I bought my unit from US but unfortunately its in another place now, so I contacted local Lenovo Support. Its almost getting 3 weeks and they didnt open a trouble ticket yet. Such a hopeless product and service.
Similar Messages
-
my iphone 4 turned off and now it won't turn back on I've tried charging it and plugging it into my computer but it's still a blank screen. please help me.
Intel-based Macs: Resetting the System Management Controller (SMC)
-
To open “Java Preferences,” you need to install a Java runtime, but you are not connected to the Internet. I have tried links that people have put on other discussions but all i get is a black screen please help!!
Try this link, warning, it's straight to download mode:
http://support.apple.com/downloads/DL1421/en_US/JavaForMacOSX10.7.dmg -
Choppy video on big screens PLEASE HELP!
I've noticed that the videos that I have exported from CS3 are very smooth when played on a computer screen and average size tv screen, but are very choppy if played on a large TV or projected on the wall. Is there a way to remedy this? Please help!
Drew.I think I figured out the issue. Thanks for all your advice. I'll repost if I have any other problems.
Drew.
Date: Wed, 24 Jun 2009 10:24:22 -0600
From: [email protected]
To: [email protected]
Subject: Choppy video on big screens PLEASE HELP!
Drew,
How is the large-screen projector connected, via a set-top DVD player to it, or by a computer connected to it? If it's via a set-top player, is it the same one used for the small-screen TV, or a different one? What is the make and model of the set-top player(s)?
Also, what DVD media was used, and what was the burn speed used to create the DVD? Was this authored in Encore, or with some other authoring application?
Good luck,
Hunt
> -
I tried updating my iPod touch 4th gen and now the screen is bright blue or flashing white and black lines.ive tried the whole home and power button thing but it only brings up the apple icons then goes back to the blue or other screen.please help?
This has worked for some others.
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod touch 4g turned off and when i try to turn it on it says its not charged. so i charge it and the apple screen comes up but stays frozen like that for a really long time, and then it just goes back to the "needs to be charged" screen. please help!
- First try resetting the iPOd. Nothing will be lost.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
-Next connect to a computer and restore the iPod if theiPod appears in iTunes.
- Next see if placing he iPod in recovery mode will allow iTunes to see the iPod so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
im running XP with all firewalls and pop up blockers off. Ive tried using chrome, firefox, and IE. no download starts and im redirected to the thank you screen, please help!!!!!!!!!!!!!!! Ive read all related articles, aswers and solutions but cant seem to get tunes to download?
Ive tried from my PC, and ive tried from another which runs Vista. Both pc's were tried using firefox, IE and chrome,and both had firewalls off and pop-ups allowed completely (I basically turned off all security). I checked for 3rd party software which could also cause "blocks" but all 3rd party software were eliminated. I even tried stopping and restarting windows installer in "computer management; services, services". Still no luck..... This is the first time that ive struggled downloading Itunes. The reason im trying to download itunes is because im attempting to restore my iphone 4.....
-
When I try to copy paste my app freezes and returns to the home screen please help.
Try resetting ...
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that didn't help, tap Settings > General > Reset > Reset All Settings
Then restart your iPhone. -
I was updating my iPad air and in the middle of update it suddently cannot reconnect to my computer and it has the iTunes logo with a plug picture on a black screen, PLEASE HELP!!!! I did try steps from http://support.apple.com/kb/HT1808?viewlocale=en_US - IT DOES'N WORK!
Yes, that is your only option.Yes. You have to restore.
Try the following if you have difficulty restoring.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
i brought an iphone 4 factory unlock and it is linked with an icloud id of previous owner, i dont even know id of icloud , 1 week ago i restore my iphone 4 n got stuck in activation screen, please help me out please?
If you are trying to activate an iPad or iPhone and it is asking for the original owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. No must contact the original owner to get permission to use the device. If you cannot contact the original owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.
-
Ipod Touch Stuck on the Apple reboot screen, please help!
Ok, So I was using my ipod touch. Actually I was downloading something as well as deleting some pictures of my ipod.
Eventually it froze up so I had to put it on reboot mode. So after about half an hour I started to notice that it had lasted way longer than usual, however I let it continue for another hour until the battery ran out. Even after the battery ran out and I plugged it into my computer it stays on the apple screen and therefore my iTunes refuses to recognize my iPod.
What can I Do?
P.S.
At times it acts like it is ab out to finally fix itself yet it just goes to black and then back to the apple screen.
I even left it charging all night and it was still in the same screeen. The only time it changes is to show me that it is out of battery
Message was edited by: whowillsaveyouI have that exact same problem! However in my case I was trying to update my apps at my friends' house and suddenly my ipod touch rebooted and now I can't touch it because it reboots every time it goes to the 'unlock' page. Please if anyone can help..please please help.
-
How to fix A6000 plus reboot loop issue? - Please help
Hi Lenovo Team, Now after couple of days with sudden reboot issue. Not my phone totally useless with roboot loop. Not able to reset to factory settings. Please help me.
Hi GeeD, thanks for helping me here.
Now that I can use the "LaCie Firmware Updater" I can see my devices in the updater and that they needed some updates (I don't know how I worked all this time without those updates).
But when I tried to update my "LaCie d2 Quadra v3" and "LaCie d2 Quadra" conected them separately, or both conected at the same time, I can't update any hard disk because an error.
Here are some pics of the sequence of the windows:
And when I do it connecting both disks, but updating just the "LaCie d2 Quadra":
I already write to LaCie, hoping to get an answer. But of course I would be thanksfull for any comment by you.
Thanks again. -
I tried to install the new update for minecraft pocket edition then all of a sudden it won't load ! It said "waiting" for almost an hour ! Nothing will load :( , then I tried to delete the app and re- install it , still the same problem :( . I turned my iPad off and on then restarted it still no hope ! . I thought it was just the app so I tried installing another 1 but it had the same problem . I was going to reboot it but that would mean loosing my stuff so I tried to back it up using iCloud but when I tapped "back up now " it won't load either !! Please help , I'll appreciate it loads thanks you !!
Rebooting will not make you lose any content. Rebooting is when you hold the home button and the sleep button down at the same time until the Apple logo appears on the screen.
You can these suggestions. One might work for you.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream. -
Q10 stuck at reboot after software update - PLEASE HELP
Hello
I was checking for software updates for my Q10 yesterday and was informed that there is a new update
I clicked on download and install, and it asked me to reboot when it was done. After that it loaded very slowly until it reached 99% 6 hours later and it remained like that for 12 hours
What I did this morning was remove the battery and sim card and I reinserted the battery, the same thing happened again and it is moving very very slowly
Can you please help?? I would rather find away in which I do not loose my BBM contacts since I have not backed up my phone...are the contacts stored on my blackberry ID or will I loose them if I reset the phone?
Thank you very muchIt finally powered on after 3 battery pulls, but now it does not make or receive calls (((
Everytime I connect it to blackberry link it says software update available, so I clicked on install, it said downloading update and then nothing happens, the download bar becomes full then nothing changes
I also tried to reload device software, i got a message saying checking repair software and it stayed like that for 3 hours then the device rebooted but nothing happened at all
I even tried redoing the software update from the phone itself 3 times, everytime it would say update successful but the phone would still not make or receive calls
Please help I dont know what to do....could the problem with blackberry link be that im using it on a mac??
I appreciate your help -
i recently installed windows 7(ultimate) on my 13 inch macbook pro.Everything was installed correcly and window also workd correctly in the first run,but when i shutdown the mac and booted again after some time it showd blank and screen. PLEASE help me to fix it.
Adam HH wrote:
I'm actually having this same problem with a macbook air running windows 8 CP. Exact same issue. I can't try your solution because I have no USB devices plugged in. Can you suggest anything else?
Thanks!
You are not having the same problem, the OP's problem was caused by USB devices which you do not have.
I suggest you start your own thread (as this is marked solved not many will look at it)
Maybe you are looking for
-
Vendor.Balance.Carry.Forward.With.SCATT
Can anybody enumerate the steps to carry forward balances of Vendors 1. Without SCATT, TCode would be preferred here. 2.With SCATT. Thanks.
-
Calendar Settings reset after reboot
Hi, Could anybody please check if you have the same issue on your phone? Sony Calendar resets settings after reboot. For example, if I set "Week starts on" = "Monday" and reboot the phone, this settings will be back to "Sunday" (which is the default)
-
HOW CAN I IMPORT TEXT FROM MICROSOFT WORD TO THE WEB PAGE?
HOW CAN I IMPORT TEXT FROM MICROSOFT WORD TO THE WEB PAGE?
-
IMac starts up (from shutdown) every day at midnight
I've probably accidentally fiddled with something, but could anybody give me any reasons why my computer starts itself up from a shut down state at 00:00 every day? It's getting quite annoying. :-D
-
Missing File Messages / iWeb adding -1 to files names
I am trying to create a website using iWeb '09 but I am have an issue with missing file messages. I created the site without an issue. Opened it up the following day and immediately received missing file messages for almost all pages on the site. iWe