Lenovo K3 note USB Charge Slow

Hi All, I have detected problem in Lenovo k3 note is that USB Charing is very slow in one hour only 5% is charged. So may i know what is the solution for that ? Regards,Paresh

My new k3 note has some charging problem. It charges very slow. It took aroung 5 hours to charge. Why is it so? Is there any phone problem?

Similar Messages

  • E7 USB Charging does not work when keyboard is loc...

    I have noticed that if the usb cable is connected when the E7 keyboard is locked, the phone does not charge.
    Is this a bug or an "undocumented feature"?
    Solved!
    Go to Solution.

    Just tested it on mine it charges without problems, btw I checked it by connecting to a PC in Ovi suite mode. I presume you face same problem using wall charger and PC USB charging. Restore it to factory settings and check(*#7780#), worth giving a shot. If it doesn't help take it to a Nokia care center.
    If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

  • My ipod touch 3rd gen doesnt work on usb charger but on dock it says "Charging is not supported with this device" How do I fix it?

    I'm taking it in to get it looked at but will they cover this? And is there a way to fix it before I take it in. I'm still under the 1 year warranty plan. My friend said that they might exchange it. It's a 64GB and I use it for a lot of things like my picture, music, contacts, and email. It's got scratches on the back but other wise its ok the screen isn't cracked or scratched.
    I have a usb charger for it but when I plug it into the PC or my wall charger it won't charge. It just says  "Charging is not supported with this device". It even says that sometimes when it's not charging. But it works on a dock station like my clock or radio.
    Also my home buttom won't work unless I press down real hard. This scares me because I'm afraid I wil persss it too hard and break it even more.
    Please help.

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar                          

  • IPod Touch 4g USB Charging Cable(s!) Not Working. Went through 5 in a year.

    I've had my 8 gb iPod Touch 4g since November 12th, 2010. I bought it from Target (so its not covered under warranty anymore) love it and use it for many hours every day, but there is a problem with the USB charging cables.
    When I got my iPod, it came with the standard Apple charging cable. That cable worked for a few months (maybe... 3?) and all of a sudden stopped working. When I used my friends cord, it worked perfectly fine. She had the same exact model and cord as I did. I ended up just buying a replacement cord, thinking that this was just a fluke or whatever. No such deal. I purchased a third party cord from amazon, and it worked for a few months again. (Let me note that I also got a car and wall charger with it, those work perfectly fine to this day.) Once again, all of a sudden it broke. And again, I tried a friend's cord and it worked fine.
    I ended up buying a third and fourth cords, which was also third party, and after that broke, I was fed up and went to the Genius Bar for an appointment. I explained my problem, and they made an appointment with me. Eventually, they just said to buy another cord, this time Apple brand. I did, and it has been working fine up until tonight, when it just stopped charging.
    When I say that the cords broke, I mean that all of a sudden they would stop charging my iPod, no matter where I plugged it in. (computer, wall, car, etc.) It would/will only charge if I bent it a very certain way, and then I would need to hold it there, which I obviously can't do for hours. (;
    I would take this apple cord back now, since I believe there is a warranty (although, I need to double check that when I can get to the papers.) if it weren't for the fact that, from use, the coating/white plastic of the actual cord has split and you can see a few of the wires. I will have to double-check if this is covered, though because of the outside appearance, I doubt that they would take it back. This has not happened with any of the other cords, however.
    What should I do? Would restoring help this problem? I have been contemplating the idea for a while, but having to re-download/etc all of my apps, music, etc., is not the most appealing idea to me.. I have reset a few things a while back, though I cannot remember what they are, sadly.
    Currently, my iPod is running iOS 5, as I just updated it about a month or so ago. Before that, it was running what the iPod touch 4g originally came with... I believe it was 4.2.1?
    I really love my iPod, but am fed up with having to buy cords every few months, as I have gone through four or five in just a year.

    I think stevejobsfan has misunderstood your problem.
    You specifically state that in one case you can see the inner cord and wires of the lead. So, either - you are mis-handling the cord or a pet is chewing it. So, if you don't have a pet - it's you.
    When you remove the cord from the iPod (or from the other end of it) you should handle by the plug, not the cord itself. If you pull the cord you are straining the connection between the cord and the plug and that will eventually cause that connection to break.
    If this had happened to just one cord, maybe it's the cord. If it happened to several of the same make from the same source, perhaps it may have been a faulty batch. But for it to happen five times, with cords from different sources and different manufacturers - everything points to the cord being handled too roughly.
    Buy another cord - but in future, remove it by gripping the plug and not by pulling on the cord. This applies to any cord or lead, including mains powered devices. If you have any other cords for any other product, I suggest you check them for damage because damaged cords can be a fire risk and create a risk of electric shock. Mains voltage can kill.
    Another thought; if you wrap cords - including headphone leads - around anything (such as the charger itself), wrap it loosely. A tight wrap also strains the cord to plug connection.
    Message was edited by: the fiend

  • Even genuine iphone 5 usb charging cable does not work for an year?

    I have bought an iphone 5 last year. With it, came the  original apple genuine iphone 5 lightning USB cable. It did not last for half year. I had to buy another original apple iphone 5 similar cable and it was gone within 3 months. I dont understand is it cable manufacturing problem? is apply selling fake cables? It is really annoying and I am really angry that such a reputed company cant give/ provide proper long lasting cables.
    My experience with these two genuine cables was that after some months of  usage, i used to observe even if its plugged it would not charge, or if you push it hard its charging. Firstly, I never keep my phone charging all time. Then how the hack can the charging cable die? or problem arise. I bought the phone and the charging cables when I was germany. I had to buy a 20 euro local companys USB charging cable after above two stopped working with no signs of damage. I have also tried cleaning the charging jack or socket where cable is inserted. It did not help. This local charging cable started to torn out automatically and it got fully damaged, Now I am in India, I bought another cable of 10 euros and it is just two days, it would not charge again.
    I am really furious now whether you use original or local USB cables they dont last for even a week? what the ****?
    Do I need to really pay for those portable charger with a big price tag, that my problem will be solved? very very upset. I never have any complaint with the phone, but the charging catastrophies, really ****** me off. I think of going back to other mobile brands like samsung or nokia where there is never a charging issue or battery drainage issue once you charge its goes for days or it  is also expensive buy a nokia or samsung charger if lose it or break it. but for iphones its really bugging situation and not just me many people around the world are having sick problem with iphone brand with charging ISSUES.
    APPLE PLEASE SORT THE PROBLEM OR SELL the PORTABLE IPHONE CHARGERS (WIRELESS) CHEAPER so that we dont have to use these silly little lightning cables. or I fear my APPLE I PHONE 5 is not genuine or its FAKE.
    PLEASE HELP>

    Look closely at the way you handle the cables. I have never had any cable, Apple or third-party, fail on me.

  • Ipod shuffle 4th generation device not shown on itunes, not charging. Seeing red light when connecting to USB charger for a few seconds, then nothing. How to fix this?

    My ipod shuffle 4th generation was working fine for a few months. My son then bit the USB charger. I bought a new USB charger, but the shuffle is not charging and not showing up under the devices in itunes. It also doesn't appear in my windows under my computer. Just to note. I also have a new ipod touch. I am able to charge that fine on the same computer using the USB charger. The device (Ipod touch) does show up in windows and in itunes. The shuffle doesn't show in either place.
    I have tried to use the apple support page. I went through each step. I made all of my USB drives not shut down, I had my computer on all night to try and charge the shuffle. All I see is a red light that appears on the shuffle for a few seconds when I first connect the USB charger to the computer. Then, nothing. Since this was working a bit ago, I don't think that I have a defective shuffle. The USB charger is brand new, I just picked it up yesterday from the apple store. I have the short one, and the longer cable as well.
    Any help that you might be able to give to me would be much appreciated. My daughter is missing listening to her music. Thanks!

    Instead of "charger," you should call it the "USB cable" to avoid confusion.  When started reading your post, I was thinking, how can your son break a USB power adapter (the "charger" that plugs into a wall socket) by biting it...
    Since you got the product with the two USB cables at the Apple Store, you have the right replacement (some third-party replacements are for the 2nd gen shuffle and do not work with the 4th gen shuffle).  Make sure you are completely inserting the plug into the headphones jack.  The fit may be tighter than expected, since the connectors are new.
    http://support.apple.com/kb/TS3572
    If you tried both of those cables, it would be unlikely that you got two faulty cables in one package.  If a new USB device has been added to the computer between the time it worked with the old cable and now, there could be a problem on the USB bus (such as not enough power or a device conflict). 
    As a test, you should shut down (power off) the computer and disconnect all USB devices (including any hub), except for standard keyboard and mouse (if used).  Do this to reset the shuffle
    http://support.apple.com/kb/ht1655
    Start up computer, run iTunes, and connect the shuffle by itself to a direct USB port on the computer.

  • HT1476 when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device.   But when i use a gigaware (radioshack brand) usb charger, no error msg.  Why?

    when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device.   But when i use a gigaware (radioshack brand) usb charger, no error msg.  Why?

    - Try restoring the iPod, first from backup and then try to factory settings/new iPod to rule out a software problem.
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and broken or cracked plastic.
    - Could you have damaged something when you took the iPod apart and replaced the Home button?

  • USB Charger Works With BF's iTouch But Not With Mine?!

    Hello! My apologies for this being a bit long even though the problem is pretty straight-forward:
    Both my boyfriend and myself have the iPod Touch 4 G. I bought mine a few months ago and bought his for a Valentine's Day present for him on Feb 14th of this year. So about a week and a half ago or so. So, the problem is with charging them. I have a Powerline dual usb wall/car charger that's been working fine for about three years. It will charge my tablet PC and it will also charge my boyfriend's iTouch. It will not, however, charge my iTouch. I can charge my iTouch through the computer or through our wifi router's usb port but as soon as I plug it into our wall charger: zip. If I plug it into the wall charger while the iTouch is turned completely off the iTouch will boot up instantly after being connected to the wall charger but it won't charge at all. Anyone have any suggestions?
    Maybe I will just have to get a new wall charger for my iTouch. I really need one as I am going to be staying with my grandmother for the month of March and she has no computer or anything for me to charge my devices on other than the wall socket. It's just odd that my wall charger will charge my boyfriend's iTouch and mine will boot up when connected to it, but it won't charge it at all. Thank you for reading this and hopefully providing me with a workable solution. Oh, yeah, forgot to mention; I reset and restored my iTouch and tried it again. No luck. At least it's charging via other means; computer/wifi router, but I'd like to find out why the wall charger is only charging one of our iTouches.
    I have tried resetting the device and I have also tried restoring it to factory settings and starting from scratch. I have tried other usb iPod usb cord/plugs, (we have three; one's mine, one's for my boyfriend's iTouch and one's left over from an upgraded iPod), and I have tried plugging the charger into different wall sockets. Like I said; it will charge the boyfriend's iPod fine and my iPod will boot up from complete shut down when plugged into the wall charger but it won't start charging.
    Thanks!
    ~Ami E. Bowen

    I am replying to my own question because this is how it was solved, for me at least. Since I was still within my 1-year warrenty I simply took my iPod Touch down to our local Apple Retail store and they traded me the faulty one for a brand new one. I went home, plugged it in to all the chargers one by one and every one works fine with the new one. So, if you have this problem, too, and are within your warrenty, I'd suggest going to your local Apple Retail Center and trading the old/faulty iPod for a new/better one.
    ~Ami E. Bowen

  • Since upgrade to IOS 10.9 and associated iTunes 11.1.3, I can no longer WiFi sync iPad (IOS 7.0.3) nor iPhone (IOS 6.1.3).  USB connection is required.  Formerly I could sync both devices without locating them physically (not necessarily charging).

    Since upgrade to OS 10.9 and associated iTunes 11.1.3, I can no longer WiFi sync iPad (IOS 7.0.3) nor iPhone (IOS 6.1.3).  USB connection is required.  Formerly I could sync both devices without locating them physically (not necessarily charging).  I have restarted both devices, turned off and on "Sync with this iPad/iPhone over WIFI" and restarted WiFi.  WiFi is operating (iPad has no SIM).  What next?

    I'm also affected by this bug in exactly the same way as you.
    Some users have had success by closing iTunes, enetering (on OS 10.9) settings --> network --> edit locations, then create a new location with the same wifi/network settings. Then restarting iTunes.
    Others have had some success by editing settings --> iCloud --> de-selecting keychain
    neither of these fixes have worked for me.
    It appears that the iPad can "see" iTunes running on my iMac because when I open settings --> general --> 'iTunes wifi sync', "sync now" is greyed out if iTunes is not running. When iTunes is started, "sync now" is enabled but just doesn't work. Nor does the iPad appear in iTunes.

  • IPhone 3GS is working but not will charge and connect to usb?

    pc case front usb cables from the mainboard on the firewire (1394) was inserted into the output. iphone usb port on front when installed, restart. iphone is running, but little battery left. I installed the usb port for charging. (Pc rear of the chassis). itune iphone did not recognize. did not start charging. I bought iPhone to factory settings. the battery is over. Now, when I connect the charger, iphone opens. Apple is coming. After a while it freezes. after some time starts again. does not charge. usb does not work.
    please help.

    Hi there, sounds like the LCD is dead. If it is under warrenty take it to your local Apple store to get it evaluated for replacement. Sorry for the bad news, hope it helps!

  • IPad Not Charging w/ 10 watt non-Apple USB charger

    Yes, I've read that the iPad requires a 10 watt charger.  I have the original iPad 10W USB charger, and also a high quality 10W USB charger that came with my HP TouchPad. When using the TouchPad charger - which is rated for 5V @ 2A (10W) the iPad says "Not Charging." 
    Why is that?  The TouchPad charger works perfectly with every other USB-powered device I own: hard drives, cameras, phones, TouchPad, etc. The cable works fine with the Apple OEM iPad charger; but stops working when connected to the non-Apple-OEM 10 watt charger.  Does the OEM charger send a signal  that tells the iPad to charge?  Dell power adapters do this (annoyingly).  Does Apple do it too?  I haven't seen any disclosure of such signals from Apple.
    Why does the iPad fail to charge when presented with the proper voltage and current specs?  Does the iPad require only Apple-branded chargers?

    Bsanders, I've had the EXACT same experience you describe using as you note a very high quality HP Touchpad 10W, 5V USB charger, whether I use the Apple or a 3rd party cable.  Despite what Nathan says, I have also had the same experience ("Not Charging" message) using other 3rd party, same voltage if lower wattage, USB chargers that Nathan suggests should work.  Only my Apple charger will work and give a prompt charge and there is no specification reason the 10W HP USB charger shouldn't.  I am not cutting a cost corner here, rather, I prefer the HP charger design as superior (smaller, same power, smaller interchangeable/twist-on international supply prongs, packs better, black color).  I strongly suspect there IS some type of proprietary signal or cabling involved to push users to Apple chargers only.  I would ask Nathan to dig a bit deeper for an explanation or workaround.   Thanks

  • HT3964 hello on my MBP telling my its not charging but it this taking charger slow

    hello on my MBP telling my its not charging but it this taking charger slow

    It won't pass 10.3.
    What does this mean?
    I figured it out. Thanks!!!
    What did you figure out? How about posting how you resolved it?

  • Lenovo G50 NOT plugged in, but 'charging'.

    I just bought a new Lenovo G50 about a month ago. The only strange problem I have picked up in the last 2 weeks, is that even when my notebook is NOT plugged into the charger, it still indicates that it is charging from an incompatible power source. Where my previous notebook, warned me on 10% battery left, my new Lenovo does not, because it is under the impression that it is 'Charging'.
    The battery life is not really affected and when plugged in, it charges the battery normally.
    Can anyone help me with a solution, before I take it back to my supplier. I know simple fixes like this can take up to WEEKS if I have to take it in.
    Thank you in advanced.

    hi dentonbronkhors,
    Welcome to Lenovo Community Forums!
    Can you try these steps:
      Open Device Manager and look Under Batteries, Right click and uninstall the item Named Microsoft SCPI compliant control method battery.
      Shut the computer down instead of doing a restart like the computer ask.
      Now Remove the Battery and Unplug the Ac adapter, Hold the poer button down for at least 10 sec.
      Turn the computer back on and See if that resolves the issue.
    Let us know your findings
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Hi,my iphone 5 is not getting charged,but i can connect to itunes in usb.but when i put for charging it is is saying this accessory may not be supported,please help

    my iphone5 is not getting charged,but if i connect to my computer via usb i can use itunes and other all functions.normally if i connect it is charging battery also,but now it is not charging .it is saying this accessory may not be supported and the cable iam using orginal apple cable, alsoiam loosing my battery percentage.please help me

    Hello beenafromgbr,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Troubleshooting iPhone, iPad, and iPod touch accessories.
    http://support.apple.com/kb/ts2634
    Best of luck,
    Mario

  • How not to charge the iphone via USB

    I was wondering if it is possible not the charge the iphone while it is plugged to the USB port of my laptop. I am just asking that as sometimes I just want to add new songs/apps without actually charging my iphone via the USB port as I prefer to do it once the battery is at 10% .
    Many thanks in advance for your help/advices.
    Regards
    Alberto

    In a word, no.
    There is no harm with charging a lithium based battery more frequently and when at any battery level and without having to charge the battery to 100% when doing so.

Maybe you are looking for

  • Unable to Create a Dataset

    Hello! I am unable to create a dataset (type dataset) for a report in Visual Studio 2012. My Type dataset is a Stored Procedure. This same report with same Proc was developed successfully using a report builder. What do I do to make it work using SSR

  • JAX-WS Client hangs thread

    Hello I have a web application which consumes a remote web service, it has been in live use for more than a year. The web service consumed is part of an off the shelf application which fails approx 6 times a year. When it fails, the GlassFish server

  • Copy and paste - can't copy parts of a SMS message

     I'm getting really frustrated with the copy part of copy/paste within a SMS. In the SMS - If I tap on any number or word = nothing happens (if nothing is underlined), If I tap on a number underlined = I get the option to phone or skype?? If I double

  • My Itunes errors when I try to pull it up

    Okay its been going on for a month now, whenever I try to open itunes this comes up, "The instruction at 0x003f001c referanced memory at 0x003f001c. The memory could not be written" I dont know what that means. Ive tried re-installing the program lik

  • Raising Domain Functional / Forest Functional Levels

    Hi guys, I've upgraded my AD servers to Windows 2012 and have removed all the Windows 2003 servers in my network. However, I wish to implement fine grained password policy. However, my Forest and Domain Functional levels are still at 2003. The minimu