Lenovo K330B driver help

I recently installed Windows 7 64bit. However, I need a Ethernet Controller, a Network Controller, a PCI Simple Communications Controller and an SM Bus Controller. Can somebody link me to a safe website where I can download these drivers? I can't seem to find them on the Lenovo site.

Welcome to the Lenovo Community !
The link below is for the available drivers from Lenovo for your model. Just select your operating system in the top box for the correct driver listing.......
https://support.lenovo.com/us/en/products/desktops-and-all-in-ones/ideacentre-k-series-desktops/idea...
Don't forget to install the Chipset Driver. That one needs to be installed first so that the operating system can correctly identify the rest of the installed hardware for their driver installation.
P.S. The SM bus controller will be included with the chipset driver.
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Similar Messages

X1 Carbon wont wake up on time after Lenovo PM Driver installed (windows 8)

Hello!
Recently I have installed latest Lenovo PM Driver on my X1 Carbon 34xx series.
I use Task Scheduler to wake up my pc on certain time (from stand by)
After I have installed latest Lenovo PM Driver, PC wont wake up.
1. I did not touch anything in my task in Task Scheduler. However, I checked it.
Task runs from ADMIN account.
Runs whether user loged on or not - checked
Highest priviledges - checked
wake the computer to run this task - checked
2. In windows Power Options "Wake up timers" are ENABLED for ALL power plans (on battery/ac power).
Hibernation is disabled, only standby
3. When I run
POWERCFG /WAKETIMERS
it SHOWS scheduled wake timer correctly!!!!!!!!!!!!
But computer does not wake up on time....
How can I fix this problem?
Thanks!

In fact I am not absolutely sure that PM Driver is causing this proble, because recently I have updated at the same time:
1. BIOS
2. Chipset Drivers
3. PM Driver
(all the latest versions from lenovo site)
And after these updates, wake up function stopped working... (
May be the "resume on RTC alarm" was suddenly disabled somewhere in BIOS? How can I get it back? (lenovo BIOS is very limited, it has no such option). I also have tried to "Load BIOS defaults" - but no success...

What are the files in Lenovo "Q" drive for?

My T400 laptop came with 1 huge C partition of ~280gb, another 19gb taken by this lenovo Q drive which is only 5gb filled. I'm thinking of re-partitioning my drive, and am wondering what might happen if i format the Q partition. There are only 2 folders inside, "showroom" and "SWTOOLS". Any idea what they are used for?

If you attempt delete the Q partition from within Vista - AFTER YOU MAKE YOUR PRODUCT RECOVERY MEDIA - Vista will offer to add the freed space to the C partition. The deletetion attempt should offer to burn the media for you. You don't need any 3rd party tools.
Z..
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Lenovo U410 Urgent Help Will Not Turn On

Hello,
Firstly i would like to thank anyone reading this post and taking the time out of their day to try and help my problem.
I have a Lenovo U410 Ultrabook i've had my Laptop for around 1-2 years now and i have kept it in a very good condition there have been no issues with it. About 1 Week ago i was using my laptop left my room for about 30 minutes to have a shower and upon returning i saw that my Laptop was not charging i unplugged the charger from the laptop and place it back in nothing happened. so i turned off my laptop and unplugged the charger from the wall socket. since then i have not been able to turn my laptop back on i have tried but the led's flash twice when i tried to turn it back on. i have changed the fuse in my charger about 3 times with new fuses all 3AMP required and there is no difference at first i thought it was a problem with the charger but now im thinking otherwise and i'm quite worried. After searching around the internet for a fix i have pressed the power button for 30 seconds and the leds blinked 3 times and after trying various methods to turn it back on it has not been succesful i have even uplugged the battery and plugged it back in after removing the back cover. i have no warranty left as it expired and i was not able to renew it. if you have had any experience with similiar problems or any suggestions i would be very interested to hear what you think the next step for me would be. i dont have much money to invest into this laptop but i am prepared to spend some money if need be.
Thank you for reading my extremely long post,
Your's faithfully
Lenovo U410 Urgent Help Will Not Turn On
Akash Desai

Dear Evanacoleman
Welcome in Lenovo Community
Kindly contact the below support to check your machine at one of our service centers so that the technical team there can decide if this is a miss use case or not
Let me know
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Disk utility tells me to start my computer with my osx disk, then repair the hard drive , help???

disk utility tells me to start my computer with my osx disk, then repair the hard drive , help???

Hi prkrgrp,
I'm sorry, I'm a bit unclear on the exact nature of your question. If you are having issues starting up from your original Install Disk and running Disk Utility to repair your hard drive, you may find the information and steps outlined in the following articles helpful:
Using Disk Utility to verify or repair disks - Apple Support
Resolve startup issues and perform disk maintenance with Disk Utility and fsck - Apple Support
Regards,
- Brenden

Windows 7 x64 on G6230 driver help(camdriver)

we just installed x64 windows seven on our lenovo g230 but we're having problems installing the camera drivers and energy management...we used the vista cd driver that came along with the unit(all the drivers work well except those two)
need help in here T_T..i also downloaded vista drivers on Lenovo but still doesnt work..hope someone help me in this..

we have the same problem but worsst... graphics drivers not complete, printer driver and bluetooth having problems.............. pleassssssssssssse neeeeeeeeeddddddddddddd help

Lenovo Tablet 2 Installation Problems - Help would be GREATLY appreciated as Lenovo WILL NOT HELP.

Hi everyone. I've been pulling my hair out with this and I'm just about at my breaking point after 15 some hours of messing with this but I thought I would give it one last shot.
I have a Lenovo Tablet 2 that originally came with Windows 8 and later was upgraded via the store to 8.1. When I went to do a complete format and re-install it asked me for media. This product does not come with media. I figured the worst thing was that I would have to go the long way and install Windows without the recovery partition and reinstall all the drivers manually. Boy was I wrong. I booted to my UEFI enabled USB Windows 8.1 installer stick which was created using the new Mediacreationtool that Microsoft released to make either an ISO or USB stick. Knowing this is UEFI only (more on that later), I downloaded the ISO and created the USB stick using RUFUS. That booted fine and i blew away all the partitions and started the install. Install goes fine until the very last step and says "windows could not update the computer's boot configuration". The end. Game over. I can't get past this. I've tried the following:
1. Created a DaRT disc and did a complete clean of the drive
2. tried a Windows 10 Disc - same thing
3. Tried to edit the BCD using bcdedit command (more on that later) and nothing.
I've probably done a half dozen other random things and I'm still back at the same position here. The big issue with this device is that it is 32BIT UEFI only BIOS. Terrible to work with because everything considers UEFI to be a 64bit only function so there isn't much that I can even get to boot.
Back to BCD Edit. Anything I try to do just gives me the result of "The boot configuration data store could not be opened. The volume for a file has been externally altered so that the opened file is no longer valid.". I cannot createstore, edit the store, or do anything with it.
Again, i'm at wits end here. I contacted Lenovo and it's out of warranty so they told me to pound sand. I asked them just for a recovery media which every device should come with and **bleep** the OEMs for not doing that aymore and they told me to go pound the same mound of sand. Help would be GREATLY appreciated. This thing is slowly walking it's way to the trash can. It's a mental thing at this point now and I have to get this working. Please help. Thank you.

Yup, we had to do a clean install and same issue nothing will work after a stock clean install of windows 8.1 pro or 8 pro or 8n or 8.1n or any 8-1 for that mater we tried 6 loads with same issue on the IO file for the atom CPU Chipset...When you try to download the drivers from there site for the IO drivers and install it stop there and does not work with there Leveno drivers and if out of warentee they do not even care if there own leveno drivers for 8.1 do not work with 8.1 for the IO drivers on Leveno download site...When we called Microsoft they even sugest getting another tablet from another better supported MFG. WOW I own 4 Leveno products and almost got a new tablet a few nights ago but will not get any more leveno products till I research the issues they have with stock roms! Reinstalls should be much more friendly and updates should be listed correctly on the web site...They do not say it is a ported win8.0 frankinstien windows load when you buy their tablet. But they should say it is kinda windows 8.0 almost and that only there usb key will let you reaload the hack-up windows the tablet needs.

Lenovo T520 Debugging Help

I recently wiped the HDD of my T520 and installed Arch from scratch from a thumb drive (side note: it's been a while since I did a fresh install and I found the new method really great). About a week later (2 days ago), I ran a system update (-Syu) and updated several packages, linux among them. Seeing that, I rebooted. After seeing the BIOS stuff and selecting to boot to Arch (I don't have it auto-select, even though I only have one partition), the screen goes black and nothing ever happens. The Wifi light turns on, but the HDD read light doesn't. I booted from my install media and tried to see if the systemd journal said anything helpful, but the logs look like they never picked up after rebooting after my latest update. My next thought was the chroot and run another system update. I updated linux again, but still no boot. During both updates, the output indicated that new image creation was successful.
Any ideas on how to begin debugging this?
FWIW, I'm using efibootmgr to boot and I see that it has had issues with kernel upgrades in the past (https://bbs.archlinux.org/viewtopic.php?id=156670&p=1), but this machine never had 3.6 or 3.7 on it (the earliest still in the cache is 3.10.3 and the latest is 3.10.7; I've never cleared the cache).

After 5 days of frustrations of how to try to identify the cause of "AC plugged in but not charging" message.My Lenovo 3000V100 has suddenly started recharging.At one moment it recharges up to 99% and stops recharging, at times it just shows 3 % remaining and stops recharging and now its showing 100% fully charged.
I dont understand this, whats a turn around to this?
Also, are there any drivers for download -IntelWin DVD drivers for this 3000V100 running on Windows Vista/media drivers.My hard disk was formatted, and i never created any recovery disc.I have at least re-installed few other drivers though.

LENOVO T400 BSOD help

it has been like 2 month since I got this laptop, and I just got a BSOD twice today, which said,
DRIVER_IRQL_NOT_LESS_OR_EQUAL
0x000000D1
and some other numbers. Any help on this? also I do ont know why, but sometimes when i start the cpu, it will freeze once it gets to desktop.

I don't know what your stock drive is, and what the pins might be.
Lacking that here's some idle speculation:
Those pins aren't power pins. They may be for jumpers that can force the SATA mode. Or something. Their absence on your new drive should not be a problem.
It's general practice with StinkPads to clone with the source drive in the external enclosure, and the target in the laptop. Otherwise problems ensue. I don't have personal experience.
[edit] Well, sort of. I do this by saving an Acronis backup image to an external HD (not a bad idea generally, IMNSHO) then restoring that to a new drive installed in the laptop.
Maybe reverse your setup and try again?
[another edit] You may find this writeup useful: Hard Drive Clonewars - Klonkrieg der Festplatten
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Lenovo G570 Need Help

Hello friends
I am installing windows 7 ultimate on my Lenovo g570 but its doest detect the CD ROM so I decided to install using my computer. So I remove the had disk and connect it to my computer and I install successfully but when I connect the HD with Laptop "it boot up to starting windows then it crash with blue screen" and I don't have any backup or anything
please tell me what to do

hi samsfs01,
Welcome to the Lenovo Community.
If your cd/dvd drive is not working, the alternate way to install Windows 7 is by creating a bootable Windows 7 USB Flash Drive. - check here - http://tinyurl.com/q7m5v2 - for step by step guide A probable reason why you got a bluescreen from the post above is because it's trying to read the machine information where you installed Windows and when you put it on a different PC, the machine information got changed (this normally happens if the two machines are not identical).
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Twist - Lenovo Device Driver Failure

Twist 3347 running 8.1
Encountered this problem in device drivers after noticing my smartphone wouldnt connect... (mtp device driver not loading)
HID Sensor Collection
DDP UMDF Driver
Lenovo Settings
Lenovo Settings Camera Audio
Lenovo Setting Power
Ive tried using the latest settings dependency package 2.2.0.26
Ive disabled, uninstalled, reinstalled, the drivers. Tried a system restore point. and no further details on the forums although this problem seems to pop up from time to time. It seems there is a conflict with the dependency package.
Ive tried reinstalling both Lenovo dependency package 1.6.25 AND lenovo setting dependency package 2.2.026 to no avail. I am trying to avoid a system refresh as I will have to install EVERYTHING. Sooo... help?

Update 7-23-2014
I ran a system refresh. Before updating all windows files after refresh, made a note that HID Sensor Collection and Lenovo Settings, Lenovo Settings Power only showed up in Device Manager with issues.
Did a complete windows update and upgrade to 8.1 via the app store.
When going into the Lenovo Settings app it asked me to download the latest files (dependency.exe)
No change to device driver errors.
I went through Lenovo support pages and manually selected Lenovo Settings Dependency Package for Windows 8.1 (32-bit, 64-bit), n15sd27w.exe
Upon restart, HID Sensor Collection, DDP UMDF Driver, Lenovo Settings, Lenovo Settings Camera Audio, Lenovo Setting Power error reappeared in Device Manager.
It seems to me the system has some issue with the dependency packages installed. I have used:
settingsdependency.exe
settingsdependencytp.exe
n15sd26w.exe
n15sd27w.exe
Please advise.

Lenovo pci card help please

hello all
please can someone help me i have a lenovo H330 decktop pc 2/3 years old
it has 2 x 2.0 usb ports in front i want to replace with usb 3.0 pci card is it possable
or will i have to replace ports at rear instead
also were would be the cheapest place to buy amerzon or maplins ?
also what one do i need to buy ?
thank you paul

hi Paul,
Welcome to the Lenovo Forums.
Looking at the IdeaCentre H330 specs, the machine natively supports USB 2.0 only so you cannot replace the front USB ports with USB 3.0. However, you're still be able to add a USB 3.0 port by getting a PCIe x1 USB 3.0 card.
- Link to picture
If you're planning to use more than 3 USB 3.0 devices at the same time, you will need:
1. A USB 3.0 PCIe x1 card (like this item).
Note:
The card requires a 5V external power. If there's no available molex connector on the machine, you will need to use the 5V 4 Pin Male Power Connector and set it up as shown in this picture. After setting it up, load up the cd and install the driver.
2. (Optional) For convenience, you can add a USB 3.0 Extension Cable.
I'm not familiar with amerzon or maplins but you can try getting these on amazon or a local retailer.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

[U310] Lenovo AOAC driver for WIN7_64

I got unknown device after reinstall WIN7_64.
Hardware IDs:
ACPI\AOA2011
*AOA2011
Search in forum, I found the driver for WIN81 at here.
http://mobilesupport.lenovo.com/us/en/downloads/DS038117
But while installing get warning of unknown publisher:
After that the unknown device is gone but I still get "yellow triangle sign with !" insystem device(see pic below):
"Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
Could anyone help where is the AOAC drive for WIN7_64?
thanks in advance!
Signature on work

Hello, i have exactly the same problem. did you find any solution? Thanks a lot in advance!

T530 Lenovo Ultranav driver issues

Hi everybody, I've had my T530 for a week or so now and really don't have any complaints. However I have been experiencing one software issue. I run Windows 8 Pro, and use two finger scrolling with the Lenovo UltraNav drivers, and whenever the system is under load, scrolling stops working for the touchpad, and for the UltraNav..
Has anybody else experienced this on other Lenovo systems? Lenovo really needs to fix their touchpad drivers, I've never had this issue on other systems before...

Hi, Blueraydude
I would recommend trying to download and install the Synaptics driver. Synaptics is the company that makes UltraNav, so you shouldn't see any loss of functionality, and it may work better for you. It can be found here.
Hope it helps,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Web-Cam does not work on Lenovo G480, PLEAS HELP!!

Hello,
I have a Lenovo G480 (20165), and my built-in Web-Cam is not working.
When I enable it by pressing Fn+Esc the little light by the Web-Cam turns on, then shuts off after a second.
So I downloaded the Lenovo Easy Capture, and when I open the software, I get a message saying "Failed To Open Camera".
And when I turn on my laptop, the little light comes on for a short moment, then the light shuts off.
I don't know what to do, It's a brand-new laptop and I've never been able to get the Web-Cam to work, not even on Skype.
I would REALLY appreciate the help. Thank you!

Have you installed camera drivers from the us support site? Try reinstalling them
Win 7
http://download.lenovo.com/consumer/mobiles/0qca12ww.exe
http://download.lenovo.com/consumer/mobiles/0lca12ww.exe
Win 8
http://download.lenovo.com/consumer/mobiles/0qca08w8.exe
http://download.lenovo.com/consumer/mobiles/0lca11w8.exe
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

Lenovo K330B driver help

Similar Messages

Maybe you are looking for