Lenovo k900 battery won't get update

I did checked out the thread before and tried the tricks. But it not working. any other suggestion ? Please help ... the battery life wont get updated really annoying me

@monpolystar,
Discussion regarding that via link below.
http://forums.lenovo.com/t5/Lenovo-Phones/Lenovo-K900-Battery-Life-Update-Problem-Lenovo-Power/td-p/...
*Non Lenovo employee*
I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

Similar Messages

Windows 8.1 Won't get updates in audit mode.

I just installed Windows 8.1 in a Hyper-V virtual machine. The release version that was distributed through msdn not the preview. I enter audit mode as soon as I can, so there have been no changes or customization applied to the install prior to entering
audit mode. I start up windows update to search for new updates. The status is displayed as "Checking for updates..." "Most recent check for updates: Never." "Updates were installed: Never." The status never changes from "Checking
for updates...". I have even left it running over night and it still says "Checking for updates...". There is never any error message or failure. Network connectivity is functional. I have attempted an install on a physical machine as well with
the same result. If instead of entering audit mode a proceed through setting up windows and a user account, updates will work just fine. There should be an update to defender as well as an update to ie11.
I considered the possibility of a corrupt download so I compared the sha-1 hash to what is listed on the msdn download page and it does match.

Quoted from http://social.technet.microsoft.com/Forums/en-US/afc7f693-f742-402f-b513-063989b79c2f/windows-81-enterprise-windows-updates?forum=w8itproinstall.
Emphasis added.
Thank You for sharing the logs. I was able to reproduce the issue in my virtual environment. To understand more about this behavior, I engaged the Product Group and I have been informed that
this behavior is By Design. WU uses the OOBEComplete() Windows API call to determine whether OOBE is in progress or not, and if so, it will not perform automatic or UI update searches. HRESULT code 0x8024a008 is the WU error code WU_E_AU_OOBE_IN_PROGRESS.
WU automatic and UI updates won’t run while Setup reports that OOBE is still in progress. This is to prevent automatic updates from causing a system reboot during OOBE, which is – needless to say – a Very Bad Thing. This problem has always existed. Unfortunately,
when the computer is in Sysprep audit mode, Setup will report to WU that OOBE is in progress even though it might not actually be so. This is the reason that updates from WU UIs are blocked in audit mode.
I was having the same exact issue when creating an updated WDS image for deployment to select end-users for testing. At first, I thought I was doing something wrong. This process--having a VM boot into audit mode so that it can be fully updated
with Windows Updates along with new and updated third-party applications so to become the baseline/template for deployment--has worked wonderfully since the Vista days. And it worked perfectly with Windows 8. Why did Microsoft choose to deprecate
the functionality is beyond me.
Its bad enough there is so very little traction in the corporate/Gov't world for Windows 8/8.1. Now it seems that Microsoft, once again, is hades bent on destroying all that was good with Windows.
This is to prevent automatic updates from causing a system reboot during OOBE, which is – needless to say – a Very Bad Thing.
So this was a problem? Really? I don't ever recall that happening to me or ever reading about such an issue. Even if this "issue" was a problem, why not just add another switch to the sysprep command to allow admins to specify
the allowance of updates. Something like like sysprep /oobe /audit /AllowUpdates? Is that too hard or too much to ask?
So now with the current Windows-won't-update-in-audit-mode default, if I chose to deploy over 200 Windows 8.1 Enterprise clients, I now have to have ALL 200 machines contact Microsoft Update or my internal WSUS (or push via Shavlik) for updates. Regardless
of which method is used, the result is that 200 COMPUTERS must consume valuable network bandwidth for updates. Not to mention there is always several machines that never act right. Instead of having 200
identically configured machines, I end up with 200 similarly configured machines.
Exactly who is making these decisions? Has anyone experienced the OOBE update issue that Microsoft claims is such a problem?
So disappointing.

My computer, OS Vista 32 bit, clock won't get updated with internet sync system

by the time I use, internet time setting --> update now
I get below errot;
An error occurred while windows was was synchronizing with time.windows.com. I have tried all the options and still get the error.
This has made my computer time wrong.
How can I fix this?

Hi,
Do you need further assistances on this issue by now?
If yes, please feel free to let us know.
Have a nice day!
Amy

Lenovo solution center won't install update

Hi,
I've got a rather high spec Lenovo Thinkpad Yoga, which I love. However, the Lenovo Solution Center keeps popping up saying "A new version of Lenovo Solution Center is available. Do you want to update now? <Update now> <Later>
When I click on update now, it downloads the ~35mb download for "2.4.002", but then doesn't install it. I'm concluding it doesn't install it by the fact that it remains on 2.2.002, the next day it'll ask me to download it again, and it does nothing after completing the download that would indicate that it has indeed updated the software.
I'm running Windows 8.1
According to the splash screen for Lenovo Solution Center, it is currently on version 2.2.002, revision 17630.
Thanks!
Andrew

I know this is an old post but for anyone else having this problem...
Once you download the update via Lenovo Solution Center and it doesn't automatically install:
1. Close the Lenovo Solution Center
2. Go to the folder "C:\Users\<username>\AppData\Roaming\LSC\Local Store"
3. Right-Click on the LSCSetup64.exe file (or whatever your LSCSetupXX.exe file is) an choose "Run as Administrator".
Be sure to check the date of the LSCSetupXX.exe file to make sure it is current so you know it is what you just downloaded.
This will install the new version.
Once complete, open the Lenovo Solution Center as normal.
Enjoy!
Frank

HP dv5000 battery won't get charged

I got myself a brand new battery for dv5000, but it will not get charged at all. I tried swapping batteries with a friend whose battery works fine in his HP dv5000 laptop... my friend's battery also refuses to get charged in my laptop.
Any help?

I got myself a brand new battery for dv5000, but it will not get charged at all. I tried swapping batteries with a friend whose battery works fine in his HP dv5000 laptop... my friend's battery also refuses to get charged in my laptop.
Any help?

Not happy that our 2 3G's won't get update, like my iPad, iMacs, Apple TV2

Common! I don't want to be left out! make it available for our 3G's!

I think what modular was trying to get across is that the last major update to the 3G made many of them run extremely slowly and prompted many complaints.
Further upgrades are likely to cause even greater issues, therefore Apple is probably doing you a favour by keeping your phone in it's best possible condition.
Upgrading from my 3G was the best thing I ever did- I really hope my iP4 doesn't end up going down the same path...
jm

Battery Won't Charge & Can't Update OSX Beyond 10.4.6

I'm a relatively new Macbook user, so any insight would be helpful.
Here's my plight:
My battery won't charge, so I called AppleCare and they told me to download the latest FIRMWARE for the battery. (This is after re-setting the battery, and pressing the button located on the BACK of the battery, hoping to get the three-or-four green lights... I'm getting nothing).
I came here and downloaded a battery fix/update - the problem is that the battery fix requires my OS to be 10.4.8.... I have 10.4.6... And I can't log onto the internet (another 'fun' issue) through my Macbook in order to download anything beyond 10.4.6....
So, now, I downloaded 10.4.7 from the apple website, off my Windoze PC, yet when I try to load 10.4.7 on my Macbook, the set-up goes through the motions, then STOPS after I ACCEPT the terms, and tells me that I don't have a (I'm paraphrasing) proper HD to store the updated version.
No more than two months ago I had to get a new HD (after only having my MacBook for six months) and I'm not looking to get another one...
Since the root of my issues stem from me not being able to upgrade... Any thoughts on how to upgrade, even though I can't connect my Macbook to the net?
MacBook Mac OS X (10.4.6)

bump #2

Just updated my iPhone 4 to iOS 7.1.2, and my phone won't get service

So I just went through the new software update, and since my phone has restarted it won't get service. A "Waiting for activation - this may take some time" message popped up after the reset, but nothing else. All I see is "Searching...".
I've never had this issue after an update, and I'm wondering if anyone else had this issue. Usually an activation would happen instantly, so I'm not sure what the issue is or how long I have to wait. Any help would be appreciated!

freeride65 wrote:
Same problem for me, ios 7.1.2 and Iphone 4 works for two day until the battery goes off. After recharged at 100% my iphone wont work. "No service" and no voice and no internet. Tried everything, but doesn't work. Apple think what you do next time, and proceed to patch this problem otherwise no more Iphone, Android instead.
Simone
We user in this user to user technical forum - don't care if you switch to a different phone, there is no Apple here to read this.
What did your phone carrier say when you contacted them about your cellular data issue?

Do I need to do a total reset on my 3gs so that it won't keep updating every time it gets near my 4gs?

Do I need to do a total reset on my 3gs so that it won't keep updating every time it gets near my 4gs? I've created a separate ID to use with the 3gs already.
Help...
Thanks!

delores a wrote:
Do I need to do a total reset on my 3gs so that it won't keep updating every time it gets near my 4gs?
It has nothing to do with "getting near: the other iPhone.
They are using the same AppleID for iCloud.
On the 3GS, Setttings > icCloud, delete the iCloud account and turn it on using the new AppleID.
Whatever I have changed on my 4S...notes, apps..etc.
Settings > iTunes & App stores.
Tap your ApleID, sign out then sign in with new AppleID.

The iPod touch 5 battery won't charge, the iPod battery gets hot and doesn't turn on... What is wrong? Can photos and data be retrieved?

The iPod touch 5 battery won't charge, the iPod battery gets hot and doesn't turn on... What is wrong? Can photos and data be retrieved?

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store. I suspect a hardware problem due to the hotness. If iTunes can't see the iPod then uor only hope if to contact a data recovery company for getting data off the iPod. If you have an iPod backup you can restore another iPod, iPhone or iPad from the backup to get the data that was in the backup
Apple Retail Store - Genius Bar

TS3059 My question is i was updating a game it got update half then due to low battery my iphone get switch of now i am trying to update my game is not geting update so what should i do pls tell me ..?

My question is i was updating a game it got update half then due to low battery my iphone get switch of now i am trying to update my game is not geting update so what should i do pls tell me ..?

See: Resolve iOS update and restore errors - Apple Support
That error usually means that your computer antivirus is blocking the update.
It can also mean that your phone was jailbroken, or your computer was used to jailbreak some iOS device in the past.

Iphoto won't open, says not latest version, yet ran software updates and version didn't get updated. what's wrong?

iphoto won't open, says not latest version, yet ran software updates and version didn't get updated. what's wrong?

Hi,
This happened to me with Lion (10.7.4). Here's what I did;
1). Download and install the 9.1 Update http://support.apple.com/kb/DL1322
2). Download and install the 9.3 Update http://support.apple.com/kb/DL1545
Hope this helps.

HT4623 While updating to ios7, it won't get past "updating iCloud settings"

While installing ios7 to my iPhone 4S, it won't get past "updating iCloud settings."

Did you lose your WiFI connection? Try updating via iTunes on your computer.

Iphone 5 poor battery since iOS 8 updated Apple need to get this sorted as if ur on Internet on fone for 20 mins or so battery goes down very quickly and no it's not my battery I have 3 iphone 5 doing same

Iphone 5 poor battery since iOS 8 updated Apple need to get this sorted as if ur on Internet on fone for 20 mins or so battery goes down very quickly and no it's not my battery I have 3 iphone 5 doing same Apple take note there's millions of people that need there done not to fully charge it then it goes flat within a hour and thats with a new battery fitted aswell

brianbrew wrote:
Apple take note there's millions of people that need there done not to fully charge it then it goes flat within a hour and thats with a new battery fitted aswell
Take note that in the TOS that you agreed to when you joined the community that this is a user to user forum, and Apple does not participate. If you want Apple to take note of something, then you need to use the feedback page HERE, and click on the appropriate link.

Ultrabay battery won't switch to main battery and results in sudden shutdown.

Hi,
I just changed my windows 7 32 bit to 64 but version. The power manager version is 3.66 and driver version 1.64, bios version is LENOVO 7UET93WW (3.23 , 12/15/2011). The ultrabay battery drains to zero and won't switch to main battery, which leads to a sudden shutdown without any warning. In windows 7 32 bit version, I don't have such problem. It's annoying. My computer is T400 7147 CTO.
Thanks!
chicagot400

Hi I have the exact same problem. I have a T400 2764 CTO. Changes I have recently made (past 2 weeks): I upgraded to Windows 7 64, added a PC Card media reader, added an express card USB 3.0, a Samsung 256 GB SSD and the Ultra Bay Battery. Everything was working great... both batteries recognized, ran Lenovo Update... Have everything...
Well the battery meter recognizes both batteries (a 4-cell and a 3-cell), combines their life, but it drains the 3-cell first to ZERO... and isn't bright enough to figure out how to switch before abruptly dropping power to the system.
Hopefully like the ATI switchable graphics that had bugs for ages this battery issue eventually gets fixed. Let me know if you figure out any solution. AND LENOVO, if you are reading, try and set it up so that the 2 battery usage maximizes the life of both batteries with whatever controller you put together.
Thanks.
- Tom

Lenovo k900 battery won't get update

Similar Messages

Maybe you are looking for