Lenovo k910 Blocked on lenovo Logo

Hi everyone !
First of all i would like to apologize for my english is a bit rusty i need your help please , i received my lenovo k910 yesterday worked perfectly i rooted it and put gapps everything was fine until LENOVO told me : hey there is an update to do , i tought cool let's do it ! so i did then when he ask me for reboot i did too and now the phone is blocked on Lenovo logo with for those who do.........please if any idea or solution will be really appreciate because i can't find anything for this problem. Many thank's in advance
ps: usb drivers for lenovo installed but phone is not recongnize well after the update and the problem .
Yesterday when working nice phone was recongnized. If i could solve this problem first i think i can reflash it again with a multilinguage rom

Press combination of Power + Volume down button after a vibration release the power button keep holding the Volume button its should entering the recovery mode.. good luck. 

Similar Messages

  • Lenovo K910 Stuck on Lenovo logo

    I have lenovo with recovery and oryginal software(4.2.2). Today I want to enter to recovery CWM. I restart phone and make mistake. Instead to push volume+ I pushed volume+ and volume- together. Now i stuck on lenovo logo, i try diffrent combination of buttons but still I have logo of lenovo. What shuld I do ?

    Press combination of Power + Volume down button after a vibration release the power button keep holding the Volume button its should entering the recovery mode.. good luck. 

  • LENOVO G50-30 stuck at lenovo logo and cant even enter bios

    Hello
    I yust got my lenovo G50-30 and wanted to install win 7 on it. after the first BsoD I went to bios and changed the AHCI to legacy mode. Got the same BsoD.  After that I changed the Os mode from win 8 to win 7 ... loaded the factory default settings and putted from AHCI to legacy mode again.
    After that the laptop turns on, but it stucks at lenovo logo. I cant access the bios anymore to make any other changes. If I insert a win7 instalation disc, it start to spin but with no sucess. also cant acess the boot options anymore.
    Any help greatly apreciated

    I suggest removing battery and AC, holding the power button for more than 15 seconds to reset the BIOS back to default settings then see if the issue remains.
    Make sure to post the results.
    Good luck.

  • Ideacenter K430 wont boot, hangs on "Lenovo" logo

    a couple of weeks ago I installed windows 7 64 bit, thought I had most of the drivers installed.. everything was working fine.
    today I tried to plug in a USB memory stick and find that my USB drivers were not installed, no biggie, so I go to Lenovo's website, download the proper drivers, install them, "Windows needs to reboot for changes to take effect", Okay, so I let it reboot.
    Now it just hangs on bootup at the "Lenovo" logo.....  tried rebooting again, same thing...  **bleep**?
    I tried F1, F2, F8, F9 at boot, nothing happens, just sits at "Lenovo" logo...
    so, what do I do now?

    unplug the usb device then remove the plug lead from the pc, hit the power button a couple of times then reconnect the power and try again
    Thx dave
    yoga 2, lenovo b540
    3 custom gaming pc systems

  • G500 stuck on lenovo logo

    g500 stuck on lenovo logo intermittently sometimes boot to windows sometimes stops on lenovo logo bios updated 

    Hey computerworld,
    It could be some device that is connected to the USB port of your laptop or the broken USB port itself. Try to disconnect any USB connected device like mouse and try to boot up. If it does not help, remove the battery from laptop and try again. Let me know what happened.
    Microsoft Certified IT Professional (MCITP)

  • Lenovo H500s stuck at Lenovo logo boot loop

    I've never had an easy use with this PC eversince I purchased it. It first rejected Windows 7 to be installed due to BIOS incompatibility which I had been warned before. I flashed the new BIOS version shared across the forum that worked for some people, it worked for me too.
     
    Then just yesterday when I turned it on, it went into Lenovo logo for few seconds then restarted. It kept repeating the boot loop before I ran the power down to shut it completely. Already ran a system diagnose but found nothing. This already occurred before when I had to perform a windows fresh reinstallation for a constant fix, it runs normally for couple of weeks till yesterday when the problem came back.
     
    Any ideas on what to do in this situation ?

    Hi Warnbroom,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing issue with system stuck at Lenovo logo in your Lenovo H500s laptop.
    Try to remove the hard drive(HDD) and check for the issue if the system is able to boot to BIOS.
    Hope this helps. Do post back if issue persists!
    Best regards,   
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Table Yoga 10 stuck at Lenovo logo.

    I tried to recover it by pressing the Power+Volume button, it showed a chinese menu which I choose the second option with 2 "M"s it rebooted after like 5 seconds and stuck again in the same Lenovo logo, I'm kind of lost, any help would be appreciated. 

    Hi Warnbroom,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing issue with system stuck at Lenovo logo in your Lenovo H500s laptop.
    Try to remove the hard drive(HDD) and check for the issue if the system is able to boot to BIOS.
    Hope this helps. Do post back if issue persists!
    Best regards,   
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • At power ON only LENOVO logo

    I read some other posts and tried unplugging the hard drive and pressing F1 and got to the BIOS. Reattached HD and only logo and could not get to BIOS.  Deattached HD and now can not get to BIOS. No beeps just logo.  Any ideas?

    No answers for me but others are having the same problem: Lenovo G500 black screen (lenovo logo)

  • A1000 displaying LENOVO logo ONLY during power ON then switches OFF again

    When pressing power button, LENOVO logo displays then turns OFF again.
    Recovery mode wont show when pressing POWER+VOL UP.
    POWER+VOL DOWN shows LENOVO logo with message "Factory mode" then turns OFF again.
    Done soft and hard reset using the reset button but still no avail.
    PLEASE HELP.

    Unable to Update or Restore..?
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Take your time... Pay particular attention to Steps 3 and 4
    Note:
    Some users have reported as many as 8 or 9 attempts were necessary before success.

  • Please help. stuck at Lenovo logo

    I bought the IdeaPad K1. Three weeks back. it was with 3.1 honeycomb. It use to freez i told my friend and he followed some website and downloded OTA updates and installed one of them went well. Today they added some new update , he tried and now the tablet gets stuck at Lenovo logo and goes infinit restarts...

    I have the same problem after I wake up one night. Now my k1 stuck on infiniti loop to reboot.  Can someone from Lenovo help?

  • Black screen after stuck in lenovo logo

    When I was shutting my computer down, the lights and the power didn't turn off so I forced it to shutdown. The next day I tried booting it up, and I was stuck in the lenovo logo for a while. When the lenovo sign is gone the screen is.just black no log in option whatsoever. My.laptop is the lenovo u410

    hi pezza1979,
    Welcome to the Forums.
    Your issue might be similar to this thread.
    Can you try the following:
    1. Follow this guide on how to enable Legacy Safe Mode
    2. When done, try to boot the machine in Safe Mode. If everything's working fine on Safe Mode, perform a clean boot and observe the machine in normal mode.
    If same problem, try to disable graphics switching:
    3. Boot into the BIOS by pressing F2 on bootup or by pressing the OneKey Recovery button > BIOS Setup
    4. In the BIOS, navigate to the Configuration Tab and set Switchable Graphics to UMA Only.
    - LInk to picture
    Let me know how it goes.
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • [LENOVE G460] Stuck at Lenovo Logo Screen when a Boot-able USB plugged in

    The subject says it all.
    I was thinking of doing a Live Install of a Linux Distribution using a Bootable USB.
    So I plugged the Boot-able USB and then Power the Laptopn ON and then press F2 to enter the BIOS SETUP
    But even after a few minutes the screen doesn't even budge from the Lenovo Logo... It just says "Entering Setup..."
    First I thought something was wrong with my Boot-able USB so I checked it by using another laptop and TADA!!!! I managed to enter the bios setup screen, change the boot order and then start the Linux Installation without any problem.
    And then I decided to do it again on the Lenovo G460 and then... The same Stuck at The Lenovo Logo Screen happened again.
    Could Anyone shed some light on this problem?
    Thanks XD

    Hi Warnbroom,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing issue with system stuck at Lenovo logo in your Lenovo H500s laptop.
    Try to remove the hard drive(HDD) and check for the issue if the system is able to boot to BIOS.
    Hope this helps. Do post back if issue persists!
    Best regards,   
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo G500 black screen (lenovo logo)

    Hello,  I have lenovo g 500 (laptop) and everything was fine until today when start my laptop i see black screen with lenovo logo (white color) link: imgur.com/tzWMuwII have tired to remove the battery with/without power cord but still same.  Lenovo G500Model name: 20236 Thanks for help! 

    Lenovo tech support is similar to Microsofts.Pretty useless. Even when you pay each money for help they point the finger at each other. If it was not so disgusting it would be laughable. At some point i hope a tech center is hit with a power outage that last a few decades so people will **bleep** can the garbage you sell and go else where. I repair computers for people daily. Most are failry stright foward problems.Unless its a Lenovo.Then its a nightmare. No wonder the local business people refuse to even take one in to work on.Of course writing this will do zero.About the same as spending money on Lenovo products and support

  • T440s sometimes only boots to Lenovo logo

    I have had my T440s for a few months it has always exhibited the following issue.
    When powering up it will sometimes (about 1 in 10) only get as far as the Lenovo logo, I then have to power it off and on and all is fine.
    I recently enabled diagnostic boot to see if any errors were being reported but it seems to hang before it even gets as far as the diagnostics.
    Over than that the machine seems absolutely fine.
    It should be noted that it is being used on an Ultradock with 2 monitors & external USB DVD but I cannot see how that could be the issue.

    Hi Baz8755,
    Welcome to Lenovo Community!
    As per your query we understood that you are facing the issue with No Boot on ThinkPad T440s.
    This kind of problem occurs if there is an issue with software or with system hardware.
    Remove the entire external device (USB HDD, USB pen-drive, USB DVD drive, USB Kb/Mouse) and check it once.
    Remove the system from the docking station and go to BIOS and check what is selected in BOOT option, it should be system HDD as first boot. If the issue persist after undocking then you have to check with scanning the HDD drive, please use “Lenovo Diagnose tool” from Lenovo support site and install it to check if there is an issue with the drive.
    Below is the link to enter the downloads page and download latest application accordingly, please click on "Select Product" then in "QUICK PATH" enter the MTM no. select the exact model.
    http://support.lenovo.com/en_US/downloads/default.page#
    Hope this helps!
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Won't go past the lenovo logo

    hi, I was wondering why my Lenovo a369i does'nt go past the Lenovo For those who do logo... can someone please tell me what happened to my phone... please help... 

    When you are at the Lenovo logo, try pressing all three buttons (power, volume up and down). It will display a menu, and do factory reset

Maybe you are looking for