Lenovo K920 Vibe Z2 Pro does not support OTG Disk?

Lenovo K920 Vibe Z2 Pro does not support OTG Disk?I try to plug an OTG Disk, and nothing happens..I try installing some OTG Helper Apps and still nothing happens..I'd rather to keep my not too often use data in my OTG Flashdisk, and only use in by plug it into my phone..Maybe there's any help with this OTG issue in my Lenovo K920?

Hi Rosennisha
I can assure you that the Lenovo K920 Vibe Z2 Pro fully supports OTG.You just have to plug it in...
Can you tell me your firmware build number?Settings>About phone>Version information>Software version number
Please make sure the USB stick you want to use is working properly(Maybe it needs to be formatted.Backup anything important first) or try a different USB stick.
Also please use a quality OTG cable.
I personally tested a 16GB 2.0 USB Stick/Drive on the K920 international version-->
Hope this helps.

Similar Messages

Cannot send emails from my corporate account with Smartphone Lenovo K920 (Vibe Z2 Pro)

Hi All,
I bought a Smartphone Lenovo K920 (Vibe Z2 Pro).
I have configured my hotmail account and everything is working perfectly.
But for my corporate email account (with IMAP Settings), incoming emails are ok but when I try to send emails, I get the message "email failed to send".
For information, I have used the same settings on my Android tablet and everyting is fine from this side.
Does someone has the same issue?
Thanks.

How to sync contacts and calendar with CloudMagic?
....Security must be blocking CloudMagic from accessing contacts&calendar.You're using contacts from the Gmail account I suppose.
Go to the Security app>Privacy Guard and set CloudMagic as ''Trusted'' or grant CloudMagic access to Personal information.
Then go to Settings>scroll down to Accounts and resync the Google and CloudMagic accounts.
Let me know how it goes.
Cheers
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Premiere Pro Does Not Support Audio-Only Capture For Some Formats, Such As HDV?

In the PPro CS 5.5 Help file under, "Recording audio", it says:
"Note: To capture an audio-only file from a digital video source, choose Audio from the Capture menu in the Logging pane of the Capture panel.
"Premiere Pro does not support audio-only capture for some formats, such as HDV."
I'm shooting in HDV and if I want to capture audio only, would I just need to switch my setting to DV?
The only thing is my Canon HV20's HDV audio is MPEG-1 Audio Layer 2, 16 bit, 48 kHz.
My DV setting is PCM audio, which I think is a better quality format, right?
Would there be any noticeable difference?
Thanks.

Capture your HDV material in the normal way and just drag audio only from the source monitor to the timeline.

The storage where the virtual hard disk is located does not support virtual disk sharing

Hi everyone,
I deployed 2 hyper v vitual machines a while ago, and i did that because I needed to test my current game Project, which is an
online game. However, i've had some problems with my Windows installation then I had to reset the pc by making it a refresh
install. I still have the hyper v virtual disks, but i cannot attach it to a new hyper-v virtual machine. it pops up this message:
"the storage
where the virtual hard disk is located does not support virtual disk sharing". I dont know anything about virtual machines, so I
didnt know I had to make the disk sharable. How can I force to attach the hard disk to a new hyper-v? I dont want to go t
hrough the whole proccess of installing the operating system all over again and updating it....
Any help is greatly appreciated!
Thanks in advance,
Romulo Romero

Hi MrDebugging,
>>
When I Try to add a SCSI Controller, and then I click browse to add a UNC I get this:
C:\Users\Public\Documents\Hyper-V\Virtual hard disks\ClienMachine.vhdx
but I tried placing in different location, and the same problem occurs!
By the way, Im not on a server , I am a domestic user and I am running it on my
Windows 8.1
According to the error message , it seems that it is not a permission issue .
The VM is Gen 1 or Gen2 ?
Generally the error message occurs when you enable "shared vhdx" on standalone/client hyper-v host :
Please try to attach the VHDx file to IDE controller if it is a Gen 1 virtual machine (because only the SCSI controller has the option "virtual hard disk sharing" and Gen 1 VM only can boot from IDE )
All in all , please do not use this feature without CSV or Scale-Out File Server with SMB 3.0 on file-based storage .
If it is not the case , please detail steps what you did .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Microphone settings (?) - Lenovo K920 Vibe Z2 Pro

Hello,
I am writing to you for a peculiar issue. I am using the phone for less than a month...and have not explored it yet fully...some time back, I bounced upon an option to change the microphone setting. I am unable to find that option again. Actually, when I am talking to someone one with this phone, the person on the other side is not able to hear me properly...so I thought of changing the mic. setting...but I am just not able to find it back.
Could you pls. help me with that.
Thank you very much,
bejoy

Hi Pat
The "Smart Sound Settings" are available for the K920 Vibe Z2 PRO.
Haven't had the chance to ''play'' with a S90 yet,and some settings are model and firmware build number dependent.
....If you discover any sound/voice or general conversation enhancements on the S90 please fell free to share them.Might help other S90 users.
Your opinions are always welcomed
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

My mac pro does not support boot camp (somehow)?

So for some reason every time I try and open the boot camp assistant I get this message "Boot camp assistant can not be used, This Mac does not support Boot Camp". I find this vary confusing as it should be able to (or so I assume as boot camp came pre installed). I don't Have a RAID set or even a RAID card for that matter. All the HD's are formatted to Mac OS Extended (Journaled). I'm not sure what else Im missing. I would consider using Parallels like on my macbook only that I'm trying to test out some rather graphic intensive games to see wether or not I want to build a gaming rig in the future, and virtual machines have this nasty habit of cutting my power in half.
Boot camp is 5.1.3
computer specs
Mac Pro (Mid 2010)
OSX 10.10.2
Processor: 2 x 2.66 GHz 6-Core Intel Xeon
Memory: 24 GB 1333 MHz DDR3 ECC
Graphics: NVIDIA GeForce GTX 680 2048 MB
4: 2 TB Hitachi HD's
Any help is much appreciated, thank you

I do not know if this will help:
Boot Camp Assistant cannot be use
Also try posting in the BootCamp forum
Boot Camp

Macbook pro does not support Final Cut Pro preview on external monitor?

I have been editing on Final Cut Pro from my imac for approx 1 year with an external monitor attached with no problems. I recently bought a macbook pro, for Final Cut Pro editing, and discovered that the monitor does not work. The Final Cut Pro preview on the external monitor freezes and in the preview pane of FCP it flick between two images.
I have been reading around some forums, and have seen a couple of people with the same problem.
Anyone have a suggestion on how to run the external monitor with FCP?
Thanks!

You have probably already done it but ensure you have updated the OS and Quicktime prior to attempting to instal Final Cut Studio.
I recently had a hard drive crash and after installing the new hard drive it would not read the OS installation disc. I ended up using an external drive case and installed the OS on the drive from a different Mac Book, then reinstalled the hard drive in the other Mac Book. Then it booted right up. I updated all the original software before attempting to install any additional software.
Everyone kept saying it wouldn't install due a possibly defective optical drive and I can't say why but it wasn't the drive. As soon as I had the system up and running again the optical drive functioned flawlessly.
I hope this helps you.

My MacBook Pro does not support Mountain Lion. How can I download Lion?

I was waiting to update my MacBook Pro until after Mountain Lion came out. It turns out my Mac is not supported. Is there a way to buy Lion? I can't seem to find it on the App store.

call 1-800-697-7753 or 1-800-676-2775 and ask for sales. After you pay the $29 they will send you a link with instructions on how to download it.

Acrobat 8 Pro does not support my scanner

I recently purchased a Xerox Phaser 6180MFP for use on a PC w/XP Pro SP3. When I scan a document from Acrobat 8 (File>Create PDF>From Scanner> I'm asked to save the document, after which the Twain Drive window appears. From here I can Preview the scan, BUT after clicking on Scan, and error window appears with the message: "The unit chosen is not supported."
On the other hand, I can successfully scan photos from Adobe PhotoShop Elements 6 with the same Phaser 6180MFP scanner.
Any suggestions?

Not sure how a network solves the problem. It might be of interest to those here what was determined to be the problem by tech support and the actual changes. Also, info about the scanner that puts it into the network category. I have no idea where a network comes in with a USB device.

Mac book pro does not support more than 1 firewire

I had trouble saving my projects to external hard drive. I met with a Pro at the apple store. Claim that while using a firewire to import a project...brand new Mac Book pro cannot support 2 firewires at a time. An error comes up. So I simply used a USB to my external hard drive. was told this is not recommended but what is alternative?...Is it true I cannot use 2 firewires at once?

Hello Mary,
I am reading between the lines, but it sounds like you want to connect a camcorder and an external firewire hard drive to your MacBook Pro at the same time ... and capture your video in FCE using the external hard drive as your capture scratch disk. Is this correct?
This can be done, and is done by many users, however SOME camcorders and SOME external firewire hard drives do not work very well together.
What make/model camcorder do you have, what make/model external hard drive(s) do you have?

HELP!!! Updating Lenovo K920 VIBE Z2 Pro

LINK TO IMAGE 1
LINK TO IMAGE 2
Anyone that could help would be much appreciated!! I live in New Zealand and ordered my K920 from China. I've had it for about four months now, it was working fine for the first few months, Google play store, Google services etc were all working fine but has now started to play up and do some really weird things and is becoming really hard to use. I've put it down to either a ROM problem or needing a system update but every time I go into settings>about phone and then go to touch 'system update' it comes up with a little window saying "Unfortunately, Settings has stopped" and it does that every single time and has done since day one that I have had it, does anyone have any suggestions?? Will attach pictures, would be so grateful for some tips as I love this phone so much!
Moderator note: Large image/s converted to link/s About Posting Pictures In The Forums

So is what your saying that nothing can be done about me not being able to update it at all?
If you're referring to OTA updating....No,you won't be able to OTA update with the current(custom/modified) firmware/ROM.
Hypothetically speaking if you were to OTA update your phone would revert(not downgrade) to the original stock Chinese firmware(NO Google services/not allowed in CN,only EN&CN ,a lot of Chinese apps... ).
.....to update it at all?
In way or another you'll always be dependent on custom firmwares,root acces,etc....
If you currently don't have any major bugs/issues I suggest to leave it as it is for the moment and consider flashing(at own risk) a new firmware when a stable Android 5(Lollipop) custom firmware comes out.As far as I know there isn't any stable K920 Android 5 firmware available ....yet.
Hope this helps.

Premiere Pro does not support the use of gtx780ti in the cc.

Premiere Pro and Media Encoder are not certified to the renderer.
If you have ever used a 780ti if you would let us know how cuda is available.

Ajedesign wrote:
Understood, but the GTX 780 Ti is the powerhouse of all GPU's and I bought two of them for that specific reason. I'm confused why you certify the normal 780 but not the Ti?
Andreas,
The team has limited resources, so there is not enough time to certify every possible GPU available to the public. That is why we deal with unsupported GPUs in a way so that you, the customer, can still use your unsupported GPU in our digital video products. If certification for this particular GPU is important to you, let the team know here: http://adobe.ly/ReportBug
When will your certification be ready?
We'll let you know. Unfortunately, we cannot announce this kind of info in advance.
Thanks,
Kevin

Lenovo K920 Vibe Z2 Pro language upgrade

What is the best way to upgrade the german language to the new K920?
Thank you!

You'll have to use it in English for the moment ... You can't add languages.
Later you can flash an international multilingual firmware, if any (not aware right now).
I don't know what the seller has told you but you'll probably get a Chinese firmware or a custom based on a Chinese firmware (including google services).
Sorry
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Lenovo K920 Vibe z2 pro Secure Zone

Hi,
Does anyone knows how to disable the Secure Zone as I can't find it in the settings?
Solved!
Go to Solution.

switch to secure zone, pull down the status bar, press and hold "secure zone" icon, enter secure zone settings screen.
Press menu key, and you can see a "delete secure zone" menu.

Citrix Worx Home Mail not working on k920 (Vibe z2 pro)

Hi,
I am experiencing some issues with the Citrix Worx Home app, which my (big international) company uses for accessing business e-mail from mobile phones.
As soon as I try to launch the Worx Mail app, it shows the error message "This device does not support encryption features required by the application" and quits immediatelly.
I already sent the bug report to the Citrix guys, but, there is a possibility this can not be resolved by them.
Anyone has a simillar experience?

Hello, I just purchased my Lenovo Vibe Z2 Pro. After charging it for 8 hours, I switched on the phone and there's an automatic firmware upadate to Lollipop. After the update, the phone is unable to restart. I cannot even access the factory reset/recovery mode. I sent it to the service centre and now they said they need to replace the board. What does it mean? Thank you.

Lenovo K920 Vibe Z2 Pro does not support OTG Disk?

Similar Messages

Maybe you are looking for