Lenovo Miix 2 11 wont recognize any SD cards

I have two Lenovo Miix 2 devices. One device will not read any SD cards. I have even tried formatting and using Miix SD cards from my working Miix and no luck.
Am I missing a driver? What is going on?
thanks
Mike

Greetings Rowan,
Questions:
If you open Macintosh HD > Applications > Image Capture and insert an SD card does it show up?
Does the same issue occur with multiple SD cards?
If you put an SD card in and go to Macintosh HD > Applications > Utilities > System Profiler > Card Reader do you see card information (as below) or just "Built in SD Card Reader":
Try:
Reset the SMC and then test: http://support.apple.com/kb/HT3964.
Reset the PRAM and then test: http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html.
Remove the contents of Macintosh HD > Library > Caches to the trash and restart the computer and test.
Assuming you are running 10.6.8 as your profile indicates, install the combo update and test: http://support.apple.com/kb/DL1399
Hope that helps.

Similar Messages

Neo4 Plat Wont recognize any keyboard!

Just put my computer together
msi neo4 plat
1 gig(2x512) pc4400 mushkin
ati x800xl
audigy2 zs
AMD 3200+ Venice
OCZ power stream 520
It boots but it gets stuck on the the "hit del to enter bios" screen. Only thing is it wont recognize any keyboard i hook up to it, usb or serial.
This is my first msi board, decided to go with it over what i usually get, asus, so far im pretty disapointed.
Is this board faulty?
HELP PLZ!

Quote from: delirious? on 16-June-05, 15:51:22
took it out and reset bios. still nothing.
This thing wont even make it past the "platinum" screen. If i reset the bios sometimes it will make it to post but it still need to get into bios and without a keyboard im sol.
really thinking about returning this thing and getting something else thats not msi.
I had about the same issue with my platinum neo4. It had the battery at 2.2V (measured) and the bios showed 1.2V for the battery.
I wasn't able to save bios settings (blank screen when I did) and returned it to the shop. They're still investigating and probably give me some feedback tomorrow. I still want the same MSI board because it ran very smooth for about a week and hope this issue will be solved somehow.

My iphone3gs wont read any sim card i put into it, is it the sim card reader? how do i fix it?

My iphone3gs wont read any sim card i put into it, is it the sim card reader? and how do i fix it? and yes the sim card matches the carrier

Possibly. Make an appointment at the genius bar and have them take a look at it.
If it was ever hacked to unlock it or jailbroken, it may now be permanently bricked.

No matter what i do, my iphone will not recognize any sim card that is put into the phone, and i have tried 3 different networks

No matter what i do, my iphone will not recognize any sim card that is put into the phone, and i have tried 3 different networks

Most likely the phone is locked to a carrier that you haven't tried yet.

Computer wont recognize any cd I put in it.

I have a M55-S3293 and the computer will not recognize any cd, Why?
[email protected]
pljames

heres a good test, turn on computer keep tapping f12 and boot menu will show
insert recovery media
choose cd/dvd press enter, if it loads recovery media outside windows you driver is functional only xp or vista has problem but if wont load media then your disc drive has problem it will be hardware and you need to get a new one

My mac wont recognize any of my devices

I have recently updated my phone from a 4 to iphone5 and was in the process of trying to transfer pics from old phone to mac. Now my mac will not recognize any of my devices finder, image capture, iphoto....it does however show up in itunes when plugged in. It has been really frustrating I just want to be able to import my pics from my old phone to iphoto and it is not recognizing any of the devices i plug in. Any help would be much appreciated.

You will likely get better responses by posting to one of the Mac forums.

Wont recognize any CD's

i upgraded my mac from OS X 10.2 to 10.4 and now the mac can't recognize any cd's. i tried games, music cd's, and dvd's, all of which worked before. i really need help!!

What happens when you try to boot normally?
What model Mac do you have. The model type can be found in the System Information.
It sounds like it might be a graphic card issue. If you're running Lion or later Boot into the Recovery volume (boot with the Command + R keys held down), select Disk Utility and repair both disk and disk permissions. Then try to reboot normally.

Itunes wont recognize any devices

Why doesn't itunes recognize any of my devices. This just started happening, never had a problem before.

hi Tkoz1960,
If you are having issues with iTunes not recognizing your devices on your Windows machine, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
- Brenden

Veer will not recognize any SIM card - Check SIM - SOS only

My phone will not recognize any sim... i tried a few and it just keeps saying check sim... i bypass the activation via devmode but i cannot get it to recognize the sim. I even went thru the trouble of using webos doctor and everything went well but still will not recognize my sims....
HELP ME PLEASE....
Post relates to: HP Veer p160una (AT&T)

If you're installing it correctly (see http://kb.hpwebos.com/wps/portal/kb2/common/article/43543_en.html#N10284), then I'd wager something is wrong with the phone and will need an exchange.

My dell latitude laptop wont recognize any ipods...

i tried using different cords and different usb ports but no use! i even tried diferent ipods....those including a 3rd and 4th generation nanos...it wont even charge...can any one help me?

Got the same problem. Basically you are raped by iTunes 8

Windows Vista wont recognize any generation Ipod. Not charging unless windows is booted off.

When I plug in any genration Ipod in windows, it dosent make the chime like other devices. Nothing is showing up in device manger, ITunes, or My computer. For all intsesive purpse it's like nothing is plugged in there. Also, it only charges when windows is turned off but power supply on. I tried 4 differnt cables and 3 differnt Ipods. A Touch, A Nanno, Classic, and a Shuffle. I have uninstalled and reinstalled Itunes. I made sure the power on the USB is set to on.
Any further help would be nice.
Thanks

ALso see:
iOS: Device not recognized in iTunes for Windows

4th gen ipod photo wont recognize any connection

I fully discharged my ipod recently when the battery was near dead. I went to plug it in this morning to charge/update it and my comp wouldnt recognize a new connection, nor would my ipod even get a charging status. I then used a wall adapter and its still nto charging. I cant get it to reset, power on, or show a charge icon. what do you think is wrong?

Have your tried to do a Reset?

UPDATED MY ITUNES NOW IT WONT RECOGNIZE ANY OF MY DEVICES. I FOLLOWED ALL THE STEPS TO FIX IT ON THIS SITE AND IT STILL DOESNT WORK.

I dont know why this doesnt work now. I updated to 11.1.3 on my windows laptop. I followed all the steps on other posts but it still doesnt work... HELP!

Welcome to the Verizon family irishlass82! I know how important it is to stay in touch and we'll make sure that you don't regret your decision! Before trading in your device, did you turn off iMessage? In effort to correct this issue, text the word STOP to 48369.
AshleyS_VZW
Follow us on Twitter @VZWSupport

Wont recognize any disk

So my roommate has a G4, only 2 years old. One day he opened it up and there was just the mac symbol on the screen. He put the install disk in and tried to reinstall the OS. However, when it came to the screen of where to install the software, there was no disk shown. It is like the hard drive just up an vanished like a **** in the wind. Help please!!

Quote from: Bas on 28-January-10, 01:07:42
Well I looked up your Raptor, this is what WD says:
Those 2 disks alone already draw ~5A @ 12V!!
My guess is you have about 14A total on the 12V lines (no you can't count them together)
So in my estimate that leave 9A for the rest to start....
For that videocard of yours you need a powersupply that can do >35A @ 12V single line to be sure it keeps working correctly, that is at least twice what you have now.
Please stop pushing the system, as that PSU of yours might explode and take the entire system with it....just happen to see one today in my office from a client and they started crying as everything was gone due to a PSU blowup. (parts even came loose of the pcb of the PSU!!)
Hmm I dont seem to find those figures on WD webpage but ok I trust you as this have been some of my concerns too when this fault happened.
Only thing I find about the powersupply to this videocard is that you need 400W PSU, so you say I would need a 700-800watts PSU for the system to run smoothly?? (not studied the amps/volts needed so much as I usually get more then I need, but since this is a build in somewhat desperation(due to many factors) maybe this went completely wrong )
EDIT: ok based on Amps/Volts I guess this should do it Corsair CX 400W about double amps on this one if not more.

My x41 2525-6nu wont recognize any 2.0 usb devices

whenever i plug in a usb 2.0 device it says "there are no high speed usb host controllers installed on this computer"

is it possible that you don't have USB 2.0? I'm not sure what X41's come with. I would have thought it would be 2.0, but maybe you only have USB 1.1, in which case I don't think you can fix this. If you do have 2.0, then it is a software issue (hopefully). Try plugging into a different port and see what it says
Message Edited by amace on 06-02-2008 11:50 AM
T61 15.4" T9300 (2.5GHz 6MB L2) Windows 7 Professional x64 4GB Memory, NVidia Quadro NVS 140M

Lenovo Miix 2 11 wont recognize any SD cards

Similar Messages

Maybe you are looking for