Lenovo monitor connected to Mac mini

I have a Lenovo LI2223s monitor connected to Mac mini - and works fine when from full start up.  But when has been in 'sleep' mode overnight, does not display any longer upon wake-up.  Is there something I can do to correct this problem? (waking the monitor does bring up a very very dim light there somewhere - but general appearance of monitor is blank - mini is no longer sleeping)

OS X: When your Mac doesn't sleep or wake - Apple Support
Mac mini 2014 won't wake monitor via HDMI
The above also applies to other monitor connections

Similar Messages

  • I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

    I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

    Well, I really would love the new unreleased mac pro however , I'm not sure of the expected cost , Everyone speculates from $3,000 to $8,000, in which I may have to wait a while to purchase.
    To the point .... I want fully functional thunderbolt ports to be on the current mac pro's .... wonder if anyone had workarounds yet?...  or could I chain the the current mac pro to a mac mini to make that happen?

  • Can I connect 2 monitors to a Mac Mini?

    I am thinking of buying a Mac Mini for an art installation project and will need to connect two monitors to it. Please can someone let me know if I can connect more than 1 monitor to a Mac mini. Can they be 19" monitors or must they be smaller resolution? Do they have to be of a particular specification? Any recommendations? Thanks very much.

    A simple splitter would theoretically support anything up to the mini's maximum resolution, but in practice it depends on the actual displays being used as the whether the mini correctly identifies the devices and offers the correct range of resolution options. Some juggling (such as disconnecting one display while the system boots or wakes from sleep) can help, but it really does depend on the display(s) as to whether the mini behaves correctly via a splitter of this sort.
    The Matrox device is technically far better because it presents itself to the mini as a single display, but of course it limits maximum resolution across both screens, and thus isn't really all that attractive a proposition unless 15" LCDs are to be used rather than anything larger.
    The USB-based device seems to offer the best of both worlds - or at least will offer the best of both worlds when released with tried and tested Mac drivers. It's not all that clear why Mac drivers have been slow in coming for these devices when they have been around for Windows for some time now, and a number of manufacturers had pre-announced Mac versions as much as a year ago. At the general price of $99 or so, a USB adaptor would provide a reasonably low cost and (importantly) flexible way to add a second display.... if such a device can be currently had!
    The forgoing is the reason the 'yes' answer is not the short one!

  • HT5219 I would like to use my iMac 7,1 as a monitor for my Mac mini 2012. Is that possible and if yes, what type of cable connection do I need? Thank you.

    I would like to use my iMac 7,1 as a monitor for my Mac mini 2012. Is that possible and if yes, what type of cable connection do I need? Thank you.

    No. Your iMac only has DVI video connection. You would need an iMac with Thunderbolt.

  • Can I use My Ibook G4 as a Second Monitor For My Mac Mini G4

    Hi
    I wonderd if theres any way of being able to use my 14'' Ibook G4 as a second monitor for my Mac Mini G4? I already have a Samsung SyncMaster 913n. Is there any way of doing this by firewire using both monitors, if not what cables would I need?
    Thanks

    There is a application called Synergy which you may find useful. It allows the keyboard, mouse and clipboard to be shared across computers, and even different operating systems. It's not strictly what you have asked for as each computer still runs it's applications (and operating system) separately, meaning you can not drag windows between the screens, but by allowing you to copy and paste between the computers, and seamlessly slide your mouse and keyboard input between them you may get the effect you desire. Oh, and it is free and open-source, so why not give it a whirl?
    You will need to connect the machines with a TCP/IP network, which can be done either with an ethernet patch cable, or alternatively as you suggest, using FireWire - these two articles may assist you in setting that up: IP over FireWire in Panther and Tiger.
    As a point of note, a commercial program, MaxiVista allows exactly what you are looking for under Microsoft Windows.
    Hope that helps.
    Jason

  • Can i run two monitors on a mac mini?

    I'm wondering if I can run a 5 year old cinema display and a cheap flat screen monitor on a mac mini. Someone at Apple said yes but someone at a Mac store said no.

    OK, I am a musician also and I just purchased a Mac Mini (late 2010 version).  So I can tell you with out a doubt that it has support for 2 monitors of any kind.  If your cinema display has the Apple ADC connector it is going to be tough. Some people use the displayport to dvi adaptor connected to a DVI to ADC adaptor and plug and claim to have it working. I have NO IDEA how it would.
    The MINI comes with this adaptor:
    Mini-DVI to DVI-D Adapter Cable for Apple Mac
    http://www.amazon.com/Mini-DVI-DVI-D-Adapter-Cable-Apple/dp/B002TIU34Y/ref=sr_1_ 8?s=electronics&ie=UTF8&qid=1307469596&sr=1-8
    FOR ALL OTHERS:
    Apple - Video adapter - mini-DVI (M) - DVI-D (F)
    http://www.amazon.com/Apple-Video-adapter-mini-DVI-DVI-D/dp/B000EHSN9Y/ref=sr_1_ 4?ie=UTF8&s=electronics&qid=1307470096&sr=1-4
    HDMI-to-DVI Video Cable
    http://www.amazon.com/SPDIF-Component-Ypbpr-Converter-v1-3b/dp/B002SFT3ZI
    Mini Displayport to VGA Cable Adapter for Apple Macbook, Macbook Pro, iMac, Macbook Air, and Mac Mini
    http://www.amazon.com/Displayport-Cable-Adapter-Apple-Macbook/dp/B002HU39BS/ref= dp_cp_ob_e_title_2
    Mini-DVI to DVI-D Adapter Cable for Apple Mac
    http://www.amazon.com/Mini-DVI-DVI-D-Adapter-Cable-Apple/dp/B002TIU34Y/ref=sr_1_ 8?s=electronics&ie=UTF8&qid=1307469596&sr=1-8

  • I want to connect a Mac mini to a Samsung 40", Whats the best way to do this?

    I want to connect a Mac mini to a Samsung 40" LED tv to use as the monitor, whats the best way of doing this?

    Understand that there is one HDMI port on your TV that is specifically designated for PC connectivity. The order that the TV or Mini are powered on may determine your results. For your specific TV model, check buyer reviews on Amazon or elsewhere that can include optimum TV/Computer settings adjustment for improved viewing results.

  • Can't see pages in Iweb when no monitor connected to mac

    ...Sounds obvious I guess, but basicaly this is my problem.
    I have a mac mini and I connect to it using logmein via my laptop. It works a treat. However when I open I web i can see all my websites but the pages just display as blank.
    If i connect a monitor to the mac mini and connect via logmein it displays fine.
    Is this some little bug or something? causes me a few problems so a solution would be great.

    Yes is on the mini, the laptop is windows, i just use the laptop to connect to the mini.
    The domain file is located in the correct place. I can see all my sites on the left, but as I highlight a page it just displays black.
    If i attach a monitor it displays fine (even with the monitor powered off)
    I thought it may be the logmein software but the same occurs using vnc.

  • What do I need to connect my Mac Mini to a TV using the S-video jack?

    Radio Shack didn't have anything in the store and suggested
    that what I needed (something with an S-video connector
    at the adapter end and a co-ax/F-connector at the TV end)
    would cost $100.
    What should I be looking for? I'd like the option to connect
    my Mac Mini to a TV (with enough resolution to read text,
    which isn't the case with a video-RCA cable), especially in
    a hotel room (using the Mac Mini as a laptop!).

    The DVI to video adapter
    <http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/6454000/wo/jP1F dznaaoNs2dPRALa1K0FqrB2/3.0.21.1.0.8.25.7.11.2.3>
    will give best results using the S-Video. Next best is composite video. If your TV set does not have either of these, you will need a RF modulator to connect to the TV antenna connector. For best results get a modulator that takes S-video. It should cost a lot less than $100.00 Radio Shack has one for $25
    <http://www.radioshack.com/product/index.jsp?productId=2103095&cp=&origkw=rfmodulator&kw=rfmodulator&parentPage=search>
    No matter what connection you use, a standard TV will not give you better than 640 x 480 resolution, so it will always be hard to read small text.

  • How do i connect my mac mini to a kvm switch using the hdmi to dvi adapter?

    I want to connect my Mac Mini using the HDMI to DVI adapter to a KVM switch cable. I have an Iogear KVM switch. The cable from the KVM switch has a male VGA end connection. I have been trying to determine the right adapter to connect the female DVI connection to the male VGA connector. I will be using the Mac mini and a PC running through the KVM switch. This is doable as the iogear switch is compatible with both a PC and a Mac. Any ideas out there? Thank you.

    You would need to get  HDMI or DVI to VGA CONVERTER, not a simple adopter. The converter requires USP connection for power. HDMI is only digital while VGA is analogue.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16812699001&nm_mc=EMC-IGNEFL 070414&cm_mmc=EMC-IGNEFL070414-_-EMC-070414-Index-_-AudioVideoSplitters-_-126990 01-L019B
    If your MIni has a mini displayport or Thunderbolt port yu can get a les expensive mini displayport to VGA afopter.

  • When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via minidisplay port. Anybody knows how to fix this?

    When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via the minidisplay port. Anybody knows how to fix this?

    Was just on the phone with Apple about this.
    The solution was as follows for me anyway...
    Go to your Finder
    Choose the Go Menu
    Choose Computer
    Choose your Macintosh Hard Drive
    Choose your "Library" Folder
    Choose the "Preferences" Folder
    There should be a folder called "Audio"
    Move that whole folder to the trash
    Empty the Trash
    Restart from the Apple Menu
    When you are back up and running;
         Choose System Preferences from the Apple Menu
         Choose Sound
          In the output tab you should now be able to make the HDMI "Sticky"
          Enjoy your sound over HDMI and no more dirty knees or broken backs unplugging the desktop speakers!
    Mac Mini 2011 2.5Ghz 8 GB of RAM - Planar 17" VGA via display port adapter and Samsung 26" LCD TV via HDMI

  • Connecting my Mac Mini DVI video output to Dell W3706MC LCD TV VGA Input

    I tried connecting my mac mini to the Dell W3706MC LCD TV VGA input but it wanted me to change the resolution of the mac to 1360 x 768 at 60 Hz. I did that but it still would not display the video. I tried my PC laptop and that worked fine with different resolutions. So I know that there is nothing wrong with the TV. Did anyone experience this same problem?
    Any help would be great.
    Thanks,
    Karl

    I'm confused about your comment "it wanted me to change the resolution of the mac to 1360 x 768 at 60 Hz." I presume the way this was communicated was through a dialog box, correct? But if you could see a dialog box, that means you had a working screen at one point, correct? Why don't you just run at that resolution?

  • Trying to connect 2010 Mac mini to alba hd tv but can't get it to work, any theories?

    Trying to connect 2010 Mac mini to alba hd tv but can't get it to work, any theories?

    Welcome to the Apple Community.
    The iPad 1 is only able to do basic AirPlay, many providers of programming have blocked their apps from working with AirPlay.

  • Can i use iCloud for connecting a mac mini with a macbook?

    I want to know if the connection between mac mini and a macbook is possible.
    Or do i have to use an i phone as well?

    Welcome to the Apple Community.
    You can sync calendars, contacts and mail between computers.
    Documents requires mobile versions of iWork to work, but If you want to upload documents that aren't for use with iOS devices this User Tip might be of interest.

  • Can i have multiple monitor with my mac mini ?

    Can i have multiple monitor with my mac mini like i do with my PC ?  2 differents screens.. not mirror.

    There's lots of Mac Mini models since 2006 or so. What do you have?
    Most support two monitors but how you do it is different depending on model.
    Put this phrase into Google
            dual monitors, mac mini
    and you'll come up with the solution needed based on which MM you have.

Maybe you are looking for

  • Adding working day as a holiday in calendar without affecting stock orders

    It was very recently decided by the SA government that this coming Wednesday, 18th May, will be a Public Holiday (PH) due to national elections. Itu2019s just been highlighted by the business now that this day is currently still set as a Production d

  • My pc won't reconize my blackberry 32 g playbook

    iam try to access my files on my playbook from my pc and it say undevice error 43 how do i fix this

  • Cell service working on open box Verizon iPad without setting it up

    Bought an open box Verizon iPad 3.  Went through set up but not enter an Id or credit card for cell service.  But cell service is working, and I can't log into the account with any of my ids.  Any thoughts on what's going on?

  • Xml chart graph

    hi all Is it possible to declare two different axis ranges for two BARS ( lines) in CHART BAR GRAPH I mean for ex X Axis for BAR1(BAR1 (LINE) is COLUMN A output) Y Axis for BAR2(BAR2 (LINE) is COLUMN B output). in chart graph. Edited by: maddy on Nov

  • **GMAIL** Problems anyone?

    I keep having this issue. I have my gmail account linked (properly) through the iPhone, as most do. When I recieve an email in my inbox, I will open it without a problem. Since most of us figured out by now that we can't recieve picture messages thro