Lenovo N100 , 0689-A4U with Win 7. No driver for PCI Bus 5.

I just acquired a 3000 N100 With Win 7.    Device manager shows a flag on (2 each)  "Base System Device" .  Under the general tab, they are listed as PCI Bus 5, device 6, function 2 and function 3.
I have no audio and the Blue tooth is not functioning. Wireless is OK and the Blue tooth lamp is on and follows the wireless switch.
The Device manager says both the Blue tooth and the audio "high def audio" devices are working properly.  ????
Card bus is OK.
Every thing else works OK.
Does any one have an answer.
Thanks,
Gordon

For "Base System Device" Install Ricoh card reader driver
from THIS page.
For sound, try the Realtek Vista driver for your laptop.
For Blutooth, try Vista driver, both from THIS page.
May need Modem driver also.
Read instructions carefully on how to extract and run Setup file!
Do one at a time, and if the driver does not work,
un-install it.

Similar Messages

  • Win 7 x64 Driver for a 32bit CF Cardbus Adapter (x61)

    Does anyone know where I can get a Win 7 x64 driver for a 32bit CF cardbus adapter mounted in the Lenovo x61 internal multicard reader?
    I am running Win 7 x64 on a Lenovo X61 7675-CTO.  I have an Viking 32 Bit High Speed Compact Flash Cardbuss Adapter inserted in the internal multicard reader.  When I insert a CF card in the reader, I get  "Mass Storage Controller" and "drivers for this device are not installed" error indicators from the Windows Device Manager.   
    This configuration was working fine for me under Win XP x32.  I read the suggestion posted to another thread that one can downgrade to Win 7 x32, but I am hoping for a X64 solution.  I have already installed the "6iio10ww" Intel Matrix Storage Manager Driver for Windows 7 (64-bit).  The problem seems to be that Viking has not released a x64 driver for this product.  It seems Microsoft should have installed the proper driver during the OS install since this device was around before the Win 7 was introduced.
    Can anyone suggest a source for the proper driver or an alternative CF card cardbus adapter known to work with Win 7 x64 OS?

    Thanks!
    Apologies for now double-posting: new thread

  • How can i download win 8 64x driver for mac early 2011

    hi my friends
    how can i download win 8 64x driver for mac early 2011

    How did you download it? Did you download it from withing Boot Camp Assistant and save it in accordance with the instructions? How did you try to install it? You install the Windows Support software from within Windows. Did you read and follow the Boot Camp installation guide and help files?

  • HT1229 what is the best method for using a iphoto with an external hard drive for greater capacity?

    what is the best method for using a iphoto with an external hard drive for greater capacity?

    Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
    And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
    And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
    LN

  • Re: Satellite Z30-A with Win 8.1 - Driver update confusion

    Hello,
    I have a question regarding driver updates. Currently, Windows Update recommends me to update the audio driver (important) and the LAN driver (optional). Toshiba Service Station, however, doesnt offer new drivers for these devices.
    My question is whether I should install these updates (particularly the important one) or if they are not approved by Toshiba yet?
    Moreover, does anyone have a changelog for the new 3.8 Bios?
    Thanks!

    Thanks for the quick replies! I was just tempted because one of the updates was classified as "important", for whatever reason, which are normally those updates that should be installed (e.g. for security reasons). In fact you are right, I dont have any problems with my laptop.
    Sorry, forgot to state the model: Z30-A with Win 8.1
    Any ideas about the bios update?
    Thanks!

  • Apple LaserWriter 16/600 PS with Win 7 (64bit): Looking for driver software

    Hello,
    can anybody tell me where to find the driver software for the Apple LaserWriter 16/600 PS connected to my Windows PC running Windows 7 (64Bit). With Win XP there was no problem at all, the printer got connected via plug and play, whereas with Win 7 I can't get it to work.
    If there is no original WIN7 compatible driver version available, is there any other printer driver that could be used instead.
    Any help is very much appreciated.
    Best regards
    Jochen (Heidelberg/Germany)

    I'm testing to install hylafax in my computer with Windows 7 another option.
    Installing a PS printer http://yourmacguy.wordpress.com/2009/12/19/print-from-win7-to-macosx/

  • Touchsmart 600 - 1220SC - no win 8 x64 driver for Touch screen

    I cant get my Touchsmart 600 - 1220SC working with Win 8 enterprise X64.
    The pc is up and running but it cant find any drivers for the touchscreen.
    I have tried to remove the device and made a reboot - no difference.
    Win 8 is activated but still no drivers in windows update - not even as an optional download.
    Anybody know where to find the driver ?
    Regards 
    Peter

    Have you tried enabling all "Optional, Recommended, and Important updates" in Windows Update??? Activate Windows 8, reboot, enable all updates in Windows Update, and see if one exists.
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Result Sets with the Microsoft ODBC Driver for Oracle

    Howdy all.
    I have an Oracle database that I have migrated from MSSQL2K. My front end is mostly VB, and I have many (hundreds) DLL's that use ADO to access the database and execute stored procedures in the database. I cannot seem to get result sets from the Oracle procedures. I have tried passing a SYS_REFCURSOR as an IN OUT parameter, and I have tried returning a SYS_REFCURSOR in a function. The Microsoft ODBC Driver for Oracle does not seem to handle the ref cursors. If I use the Oracle ODBC driver, then ref cursors are handled sort of magically. Just like the result sets are in MSSQL with the SQL Server ODBC Driver.
    The question that I would like to pose to anybody willing to answer is this: Is there any way to use the Microsoft ODBC Driver for Oracle without changing the way I do the database access (using ADO connection/command/recordset objects)? I need the same DLL's to work on top of both MSSQL and Oracle.
    I know that what I want to do is possible using the Oracle ODBC driver, but this will take some major changes to some of my DB components. I am trying to stay away from this, but it looks like I am going to have to go that route - that is unless somebody wows me with a good answer to this post.
    wally

    As you are using Microsoft driver which works in XP and does not on Win 2003 you should post this on microsoft forum.

  • Win 8.1 driver for my MX870 printer

    Just got a new Dell with Windows 8.1. When I plugged in my MX870, Windows installed a driver. The driver for printing seems similar to the Canon original driver I got 2-3 years ago and installed on my old Dell running Vista.
    But, I don't see a Canon driver for scanning with the MX870. I do see the lame Windows Fax and Scanner applet, but that really is lame.
    I see that the Canon web page has a Windows 8 driver for the printer. So, always cautious about installing anything- I presume I should uninstall the driver that Windows 8.1 installed, then install the driver on the Canon web site?
    If so, should I install the driver with the printer NOT connected to the computer?
    thanks,
    Joe
    Solved!
    Go to Solution.

    Hi JoeZ,
    You don't have to uninstall the drivers that were already installed by Windows; you can just download and install the latest drivers for the printer from the Canon USA website.  Please click here to go to the Drivers and Software page for the PIXMA MX870.  Once on the initial download page for your model, please do the following:
    1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
    2. Next, please click on the red arrow next to the "RECOMMENDED FOR YOU" section and click the MP drivers file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
    Once you have downloaded the MP drivers file, please follow the steps above to also download the rest of the software for the printer, except in Step 2 you will want to click on the red arrow next to the word SOFTWARE to display and download the software.
    Hope this helps!
    This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Sql Exception on Testing Configuration with SQL Server JDBC driver for XA

    I have a requirement of analyzing the behavior of SQL Server JDBC data sources for XA transactions in our application.We have been using Non-XA drivers for both Oracle and SQL Server as we had no requirement for transactions spanning across multiple databases in past.I have setup and tested the XA driver for Oracle (Oracle Driver (Thin XA) for Instance Connections 9.0.1,9.2.0,10,11) in Weblogic 11g and its working perfectly for transactions spanning across two databases.No when I am trying to configure weblogic 11g R1 for Sql server JDBC driver to support XA transactions with driver details as follows,
    Server:Weblogic 11g R1
    Driver Type: MS Sql Server
    Database Driver :Oracle's MS SQL Server Driver(Type 4 XA) Version:7.0,2000,2005)
    Database:SQL Server 2005(Single Instance)
    and try to create a new data source and select "Test Configuration" and following error is thrown ,
    <Mar 17, 2011 4:49:49 PM GMT+05:30> <Error> <Console> <BEA-240003> <Console encountered the following error java.sql.SQLException: [OWLS][SQLServer JDBC Driver][SQLServer]xa_open (0) returns -3
    at weblogic.jdbc.sqlserverbase.BaseExceptions40.createAppropriateSQLExceptionInstance(Unknown Source)
    at weblogic.jdbc.sqlserverbase.BaseExceptions40.createSQLException(Unknown Source)
    at weblogic.jdbc.sqlserverbase.BaseExceptions.createException(Unknown Source)
    at weblogic.jdbc.sqlserverbase.BaseExceptions.getException(Unknown Source)
    at weblogic.jdbc.sqlserver.tds.TDSRequest.processErrorToken(Unknown Source)
    at weblogic.jdbc.sqlserver.tds.TDSRequest.processReplyToken(Unknown Source)
    at weblogic.jdbc.sqlserver.tds.TDSRPCRequest.processReplyToken(Unknown Source)
    at weblogic.jdbc.sqlserver.tds.TDSRequest.processReply(Unknown Source)
    at weblogic.jdbc.sqlserver.SQLServerImplStatement.getNextResultType(Unknown Source)
    at weblogic.jdbc.sqlserverbase.BaseStatement.commonTransitionToState(Unknown Source)
    at weblogic.jdbc.sqlserverbase.BaseStatement.postImplExecute(Unknown Source)
    at weblogic.jdbc.sqlserverbase.BasePreparedStatement.postImplExecute(Unknown Source)
    at weblogic.jdbc.sqlserverbase.BaseStatement.commonExecute(Unknown Source)
    at weblogic.jdbc.sqlserverbase.BaseStatement.executeUpdateInternal(Unknown Source)
    at weblogic.jdbc.sqlserverbase.BasePreparedStatement.executeUpdate(Unknown Source)
    at weblogic.jdbcx.sqlserver.SQLServerImplXAResource.executeXaRpc(Unknown Source)
    at weblogic.jdbcx.sqlserver.SQLServerImplXAResource.executeXaRpc(Unknown Source)
    at weblogic.jdbcx.sqlserver.SQLServerImplXAResource.open(Unknown Source)
    at weblogic.jdbcx.sqlserverbase.BaseXAConnection.init(Unknown Source)
    at weblogic.jdbcx.sqlserverbase.BaseXAConnection40.init(Unknown Source)
    at weblogic.jdbc.sqlserverbase.BaseClassCreatorForJDBC40.createXaConnection(Unknown Source)
    at weblogic.jdbcx.sqlserverbase.BaseXADataSource.getXAConnection(Unknown Source)
    at com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:550)
    at com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:450)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)
    at org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)
    at org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)
    at org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)
    at org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
    at org.apache.beehive.netui.pageflow.internal.FlowControllerAction.execute(FlowControllerAction.java:52)
    at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
    at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
    at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
    at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:64)
    at org.apache.beehive.netui.pageflow.interceptor.action.ActionInterceptor.wrapAction(ActionInterceptor.java:184)
    at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.invoke(ActionInterceptors.java:50)
    at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:58)
    at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:87)
    at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
    at com.bea.console.internal.ConsolePageFlowRequestProcessor.processActionPerform(ConsolePageFlowRequestProcessor.java:261)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
    at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
    at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
    at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
    at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
    at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
    at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
    at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
    at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
    at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686)
    at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.processActionInternal(ScopedContentCommonSupport.java:142)
    at com.bea.portlet.adapter.scopedcontent.PageFlowStubImpl.processAction(PageFlowStubImpl.java:106)
    at com.bea.portlet.adapter.NetuiActionHandler.raiseScopedAction(NetuiActionHandler.java:111)
    at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:181)
    at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:167)
    at com.bea.netuix.servlets.controls.content.NetuiContent.handlePostbackData(NetuiContent.java:225)
    at com.bea.netuix.nf.ControlLifecycle$2.visit(ControlLifecycle.java:180)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:324)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:130)
    at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
    at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
    at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
    at com.bea.netuix.nf.Lifecycle.runInbound(Lifecycle.java:184)
    at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:159)
    at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
    at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
    at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:199)
    at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:47)
    at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    I followed the instruction in weblogic jdbc drivers guide to configure the JTA Transactions to support XA on SQL Server machine and weblogic server which included,
    1.Copying sqljdbc.dll copied to SQL_Server_Root/bin directory from WL_HOME\server\lib.
    2.Copied instjdbc.sql to sql server machine and executed the script with following output,
    Changed database context to 'master'.
    Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
    Cannot drop the procedure 'xp_jdbc_open', because it does not exist or you do not have permission.
    Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
    Cannot drop the procedure 'xp_jdbc_open2', because it does not exist or you do not have permission.
    Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
    Cannot drop the procedure 'xp_jdbc_close', because it does not exist or you do not have permission.
    Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
    Cannot drop the procedure 'xp_jdbc_close2', because it does not exist or you do not have permission.
    Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
    Cannot drop the procedure 'xp_jdbc_start', because it does not exist or you do not have permission.
    Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
    Cannot drop the procedure 'xp_jdbc_start2', because it does not exist or you do not have permission.
    Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
    Cannot drop the procedure 'xp_jdbc_end', because it does not exist or you do not have permission.
    Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
    Cannot drop the procedure 'xp_jdbc_end2', because it does not exist or you do not have permission.
    Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
    Cannot drop the procedure 'xp_jdbc_prepare', because it does not exist or you do not have permission.
    Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
    Cannot drop the procedure 'xp_jdbc_prepare2', because it does not exist or you do not have permission.
    Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
    Cannot drop the procedure 'xp_jdbc_commit', because it does not exist or you do not have permission.
    Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
    Cannot drop the procedure 'xp_jdbc_commit2', because it does not exist or you do not have permission.
    Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
    Cannot drop the procedure 'xp_jdbc_rollback', because it does not exist or you do not have permission.
    Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
    Cannot drop the procedure 'xp_jdbc_rollback2', because it does not exist or you do not have permission.
    Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
    Cannot drop the procedure 'xp_jdbc_forget', because it does not exist or you do not have permission.
    Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
    Cannot drop the procedure 'xp_jdbc_forget2', because it does not exist or you do not have permission.
    Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
    Cannot drop the procedure 'xp_jdbc_recover', because it does not exist or you do not have permission.
    Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
    Cannot drop the procedure 'xp_jdbc_recover2', because it does not exist or you do not have permission.
    creating JDBC XA procedures
    instxa.sql completed successfully.
    3.Verified that MSDTC service is running on both SQL Server and weblogic machines with XA Transaction enabled and DTC option enabled for both inbound and outbound connections.
    4.Copied sqljdbc.jar (version 3.0 downloaded from msdn portal) to "C:\Oracle\Middleware\wlserver_10.3\server\ext\jdbc\sqlserver" directory and updated weblogic_classpth variable in commEnv.cmd file.
    set WEBLOGIC_CLASSPATH=%JAVA_HOME%\lib\tools.jar;%BEA_HOME%\utils\config\10.3\config-launch.jar;%WL_HOME%\server\lib\weblogic_sp.jar;%WL_HOME%\server\lib\weblogic.jar;%FEATURES_DIR%\weblogic.server.modules_10.3.2.0.jar;%WL_HOME%\server\lib\webservices.jar;%ANT_HOME%/lib/ant-all.jar;%ANT_CONTRIB%/lib/ant-contrib.jar;C:\Oracle\Middleware\wlserver_10.3\server\ext\jdbc\sqlserver\server\ext\jdbc\sqlserver\sqljdbc.jar
    Can some one please provide some input on whats causing this and any other steps needs to be followed to implement XA support using SQL Server JDBC driver.

    You seem to have done everything correctly and diligently. I would ask that you open
    an official support case.

  • Problem with a DDI Device driver for Solaris 8 and 9 on a Sun-Blade-1500

    The problem has to do with dma allocated memory and the little-endian format.
    When I copy blocks bigger than 256 bytes to the dma memory, using a uiomove() or bcopy(), the data after the first 32 bytes is swapped around over 8 bytes.
    The bcopy from a driver (stack) buffer into the dma virtual memory has the same affect.
    So it has to do with the kernel dma allocated memory and the endianess.
    When I set the byte order to big-endian inside the ddi_device_acc_attr the data seems to be alright, also with bigger transfer sizes.
    My device however needs the little-endian format.
    I have the same the same device driver running without any errors on a Sun Blade-150 Solaris 8 for a long time now.
    Can somebody please advise me?
    Data example,
    test data: 0x00,0x01,0x02,?.
    64, 128 or 256 bytes blocks:
    000: 07 06 05 04 03 02 01 00 0F 0E 0D 0C 0B 0A 09 08
    016: 17 16 15 14 13 12 11 10 1F 1E 1D 1C 1B 1A 19 18
    032: 27 26 25 24 23 22 21 20 2F 2E 2D 2C 2B 2A 29 28
    048: 37 36 35 34 33 32 31 30 3F 3E 3D 3C 3B 3A 39 38
    064: 47 46 45 44 43 42 41 40 4F 4E 4D 4C 4B 4A 49 48
    080: 57 56 55 54 53 52 51 50 5F 5E 5D 5C 5B 5A 59 58
    096: 67 66 65 64 63 62 61 60 6F 6E 6D 6C 6B 6A 69 68
    112: 77 76 75 74 73 72 71 70 7F 7E 7D 7C 7B 7A 79 78
    512 or 1024 bytes blocks:
    000: 07 06 05 04 03 02 01 00 0F 0E 0D 0C 0B 0A 09 08
    016: 17 16 15 14 13 12 11 10 1F 1E 1D 1C 1B 1A 19 18
    032: 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F <----- ?
    048: 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F <----- ?
    064: 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F <----- ?
    080: 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5D 5E 5F <----- ?
    096: 60 61 62 63 64 65 66 67 68 69 6A 6B 6C 6D 6E 6F <----- ?
    112: 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7D 7E 7F <----- ?
    Code example, how I allocate the DMA (kernel) memory:
    DDI_STRUCTURE_LE_ACC = Little Endian format
    DDI_STRUCTURE_BE_ACC = Big Endian format
    static struct ddi_device_acc_attr sse_dma_attr =
    DDI_DEVICE_ATTR_V0, /* The version number of this structure */
    DDI_STRUCTURE_LE_ACC, /* see above */
    DDI_STRICTORDER_ACC, /* How CPU will reference data, default */
    The dma definitions for allocating the DMA memory
    static ddi_dma_attr_t dmaattr= {
    DMA_ATTR_V0, /* version */
    0, /* starting address for DVMA */
    0xffffffff, /* end address for DVMA */
    0xffffffff, /* max transfer count in one cookie */
    0x1, /* address restrictive alignment, 1 = byte alignment */
    0x7, /* burst sizes */
    1, /* min number of byes */
    0x00ffffff, /* max number of bytes device can transmit/receive */
    0xffffffff, /* upper bound of the DMA engine's address */
    1,
    512,
    0, /* DDI_DMA_FORCE_PHYSICAL doesn't work */
    ddi_dma_alloc_handle()
    if((ret=ddi_dma_alloc_handle(xsp->dip,
    &dmaattr,
    DDI_DMA_SLEEP,
    NULL,
    dmahandle_out)) != DDI_SUCCESS)
    cmn_err(CE_CONT, "ucr_dma_alloc_memory, "
    "ERROR ddi_dma_alloc_handle status = %d\n",
    ret);
    return(ret);
    if((ret=ddi_dma_mem_alloc(*dmahandle_out,
    (uint_t) size,
    dma_acc_attr,
    DDI_DMA_CONSISTENT,
    DDI_DMA_SLEEP,
    NULL,
    (caddr_t *)&raw_kern_addr,
    &real_len,
    dma_acc_handle_out)) != DDI_SUCCESS)
    cmn_err(CE_CONT, "ucr_ucr_dma_alloc_memory, "
    "ERROR ddi_dma_mem_alloc status = %d\n",
    ret);
    ddi_dma_free_handle(dmahandle_out);
    return(ret);
    This will also init the PCI - IOMMU for
    address translation.
    if((ret=ddi_dma_addr_bind_handle(*dmahandle_out,
    NULL,
    (caddr_t)raw_kern_addr,
    real_len,
    DDI_DMA_RDWR | DDI_DMA_CONSISTENT,
    DDI_DMA_SLEEP,
    NULL,
    &dma_cookie,
    &count)) != DDI_SUCCESS)
    cmn_err(CE_CONT, "ucr_ucr_dma_alloc_memory, "
    "ERROR ddi_dma_addr_bind_handle status = %d\n",
    ret);
    ddi_dma_mem_free(dma_acc_handle_out);
    ddi_dma_free_handle(dmahandle_out);
    return(ret);
    if((ret=ddi_dma_sync(*dmahandle_out,
    0,
    real_len,
    DDI_DMA_SYNC_FORDEV)) != DDI_SUCCESS)
    cmn_err(CE_CONT, "ucr_ucr_dma_alloc_memory, "
    "ERROR ddi_dma_sync status = %d\n", ret);
    ddi_dma_unbind_handle(*dmahandle_out);
    ddi_dma_mem_free(dma_acc_handle_out);
    ddi_dma_free_handle(dmahandle_out);
    return(ret);

    I am having the similar problem identified in this thread.
    OS: Sun Solaris 10 01/06
    Hardware: Sun Blade 2500
    PCI Memory card.
    Problem: When driver moves more then 40 bytes via PIO from a PCI device memory card, the long words are swapped starting at 40 byte transfer size and greater.
    device memory description:
    static ddi_device_acc_attr_t sdram_access_attr =
    DDI_DEVICE_ATTR_V0, /* Boilerplate value */
    DDI_STRUCTURE_LE_ACC,
    DDI_STRICTORDER_ACC /* Don't reorder accesses */
    The user application does a read call, which goes to xxread. xxread calls physio( xxstrategy, bp, dev, B_READ, xxminphys, uio );
    In xxstrategy the transfer is done using
    ddi_mem_rep_get8(ucb->ucb_sdram_accHndl,
    (uint8_t*) kaddr,
    (uint8_t*) raddr,
    (size_t) bp->b_resid),
    (uint_t) DDI_DEV_AUTOINCR );
    PCI Device memory is loaded with incrementing address (8bit), 0,1,2... This is confirmed using a PCI Bus Analyzer.
    A read of 36 bytes or less returns:
    03 02 01 00 07 06 05 04 ...
    A read of 40 bytes returns:
    07 06 05 04 03 02 01 00 ...
    If I peek 1 byte at a time using ddi_get8(ucb->ucb_sdram_accHndl, ...) I get
    00 01 02 03 04 05 06 07
    Why are the long words swapped starting at 40 byte transfer size and greater?

  • Re: Satellite L70-A-13E and Win 8: Twain driver for built-in webcam required

    Hi,
    My application require TWAIN DRIVER for Web Camera of Satellite L70-A-13E on Windows 8.1.
    Would you please tell me how can I get it?
    regards
    Nevzat

    The TWAIN driver is a software.
    For example you want to take a picture from built-in web camera by using your application.
    Your application accesses to web camera via twain driver.
    Just like printer driver. With printer driver you can send your documents to printer via printer driver.
    With the TWAIN driver you can access to WEB CAM and capture the picture and save the picture image
    yo your application.
    Almost all of the external web cameras have TWAIN drivers. Twain driver is become defacto.
    I asked the TWAIN driver here because my note book has built-in web camera.
    I may access to built-in web camera via TWAIN drivers. Is the any way you know?
    I have been using these TWAIN drivers over 20 years in my application.
    For getting picture from camera or from scanner.
    Best regards
    Nevzat

  • Connecting to SQL Server 2000 with MS SQL Server Driver for JDBC

    Hi,
    I am brand new to JDBC . I have installed JDBC driver (for JDBC 2.0) from the Microsoft site and made relevant changes to the class path variable to include the driver paths, as suggested in the driver help documnnts. I have written a simple java code to register. But i get "class NotFound" error.
    here's my code. What am I doing wrong? Thnaks for the help....
    class Test {
         public Test() throws Exception {
              // Get Connection
         //     Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
         DriverManager.registerDriver (new com.microsoft.jdbc.sqlserver.SQLServerDriver());
              Connection conn = DriverManager.getConnection("jdbc:microsoft:sqlserver://SQL1:1433",myuser,mypwd);
              if (conn != null) {
                   System.out.println();
                   System.out.println("Successful Connection");
                   System.out.println();
                   // Meta Data
                   DatabaseMetaData meta = conn.getMetaData();
                   System.out.println("\n Driver Information");
                   System.out.println("Driver Name: " + meta.getDriverName());
                   System.out.println("Driver Version: " + meta.getDriverVersion());
                   System.out.println("\n Database Information");
                   System.out.println("Database Name: " + meta.getDatabaseProductName());
                   System.out.println("Database Version: " + meta.getDatabaseProductVersion());
         } //Test
         public static void main(String [] args) throws Exception {
              Test test = new Test();
    }

    Hi MoD,
    This is the exact command I used for compiling
    C:\>javac -classpath "c:\java;c:\Program Files\Microsoft SQL Server 2000 Driver
    for JDBC\lib\mssqlserver.jar;c:\Program Files\Microsoft SQL Server 2000 Driver f
    or JDBC\lib\msbase.jar;c:\Program Files\Microsoft SQL Server 2000 Driver for JDB
    C\lib\msutil.jar" c:\java\Test.java
    To Execute I used
    C:\>java -classpath "c:\java;c:\Program Files\Microsoft SQL Server 2000 Driver
    for JDBC\lib\mssqlserver.jar;c:\Program Files\Microsoft SQL Server 2000 Driver f
    or JDBC\lib\msbase.jar;c:\Program Files\Microsoft SQL Server 2000 Driver for JDB
    C\lib\msutil.jar" c:\java\Test
    In fact it kept thrwing up the Class Not Found error for the above commands.
    But as U suggested I removed the classpath and executed both javac and java commands without classpath clause , and guess what it worked for the line
    Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
    (i.e., it dint throw any exception like before). So can I assume that driver is successfully registered?
    I tried using Jcreator for compile and run. But I got the same error msg as the commands given above with calsspath caluse. Is there a way around for this to make it work from an external editing tool like Jcreator apart from removing the classpath option from the JDKTool optional setting(doing this did not help for me)
    Also one last favor: How do I connect with the trusted connection option? (i.e. it should use already logged in windows authentification login)
    Thanks for all U'r help. I appreciate it very much.
    Suma

  • Lenovo GPS on X230 with Win 8.1?

    Running Gobi 4000 card, where do I find the Windows 8.1 64bit compatible vesion of the Lenovo GPS application?
    Is this build into Win 8.1?
    JIM

    I installed WIN7 drivers to and software for this - works fine (I have Win8.1).
    But Lenovo has not made software version for win8 or 8.1.
    X230T / i5/ 240GB SSD/ 16GB RAM/ WIN8.1 PRO

  • [Solved] Starcraft 2 crashe with wine bunblebee nvidia driver

    After the upgrade of yesterday (2013/05/12) my starcraft II (under wine) crashes.
    After a downgrade of the nvidia driver ( and linux kernel ) my SCII is running once again perfectly, so I guess there is something wrong between the new nvidia driver (319.17-2) and the following package : bumblebee (3.2.1-1), wine (1.5.30-2) .
    I'm a little buzzy actually and didn't take time to check deeply why, but if someone wants some data just ask
    humhumhum
    Edit: the package bunmblebee has been updated and solves the problem. Thanks.
    Last edited by humhumhum (2013-06-03 11:59:43)

    Do other GL programs work? e.g. glxgears. Is direct rendering enabled? (glxinfo | grep -i direct)

Maybe you are looking for