Lenovo n200 3000 0769-BAG vista camera driver?

Hello my friends. I have Lenovo n200 3000 0769-BAG model laptop. My operating system is vista home basic x86. My integrated camera doesn't works sometimes. This event happens frequently at now. The camera driver is not original, it is automatically installed when vista operating system setup. So what can I do? Is there any original camera driver somewhere? Thanks a lot...
p.s: (0689 type camera driver doesn't work at 0769-BAG.)
Message Edited by gizsin on 04-28-2009 07:11 AM

Hi !
I have exactly the same laptop and I had the same problem.
It was hardware related. The camera wire become loose and was not connecting sometimes.
You can, if skilled, solve the problem yourself by following the dismantling videos and correctly plugging in the camera. If you route the cable correctly you'll solve the problem.
Bear in mind that you need some tools, time as you'll have to dismantle quite all the laptop and skills in order not to make things worse...

Similar Messages

BIOS Update for Lenovo N200 3000 0769-ASU

Hello,
I want to upgrade my hard drive but I must upgrade my BIOS, but I cannot find a BIOS Update for Lenovo N200 3000 0769-ASU with Windows 7, any help or assistance is appreciated.

Sorry for replying to an old post but I found one of theese laptops a couple of days ago where I work. (I work at a recycle station/place/something)
I decided that I wanted to try and fix it since it suffers from the issue discussed here.
I have about 15 yrs experiance with fixing computers and about 3 years with laptops and my repair succes rate is rather high.
But this laptop is a piece of very bad and **bleep**ty workmanship - The whole upper part of the mainboard is toast - the part that is just under the connection to the batteri is badly burned.
I will upload some pictures shortly, and give a detailed workaround if I get it fixed
cheers

My Lenovo n200 3000 power on problems..plese read more for full error story.

My lenovo n200 3000 on switches on when i press the power button wait for the windows sign to appear. it then shuts down. then i press the button again and select start windows normally. i have to do this 3 times every time i switch on my laptop on!!! please help this is very annoying.

This one looks like a hardware/software conflict. Go to service or you can try to do something yourself.
I can give these advises:
It can be software problem, so you can do this:
1. You can restore your OS with last saved (fully working and starting) restore point.
OR
2. You can try to start Windows in SafeMode and: 1) try to find coflict driver in My Comp>properties>device manager (look for yellow "!"); 2) try to delete all lately installed drivers.
OR
3. You can reinstall Windows in "clean" install. I mean with disk format.
OR it may be hardware problem, so you should do this:
1. It may be problem with power.
Solution:
   - Try to start laptop without battery. Just with AC-adapter.
   - Try to start laptop just with battery.
2. Maybe some detailes get out from slots.
   - You should open laptop and check every detail (hdd, ram etc). Get them out clen it and than put them in.
N.B. In my desktop PC such thing was because of "Microsoft UAA High Definition Audio driver". It conflicted with my video. Also in my old laptop it was because my lcd was not fully plugged in.
If nothing of these solve the problem go to the service.
If you need translating agency - contact with me!

Spill milk on lenovo n200 3000

I spilled milk on my lenovo N200 3000
i just switched it off and removed battery.
i moved laptop upside down so the milk dropped on the floor and left in an open air...
i dont know what to do next.

The only thing I know to do is to take it apart as much as you can to make sure there is no liquid anywhere. Then you can try powering it back on. Compressed air cans dry pretty good.
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

Vista Camera Driver leaks LOTS of handles

I have a R61 with built in webcam.
The Lenovo driver installed is called CameraMonitor Application (vsnp2uvc.exe) and is currently using 471,229 handles, and is going up 2 handles a second.
(You can see this easily in Task Manager if you view all users processes and add the 'Handles' column.)
I don't often boot my laptop (I use sleep a lot), so if you're trying to repro, make this part of the tests.
Eventually the system stops responding correctly by giving handle error in other programs...
This is with Vista 32 SP1...

Ok -
We can try to have a look.. Could you both post back with system model type, Vista version, any service packs and camera driver version (or if native in Vista). These will be all questions (plus a few) the techs will have when setting up a system to see if this occurs for us as well.
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

List of processors supported by N200 3000 0769

Hello,
Can you please tell me which T familly processors are supported by N200 3000 chipset GM965?
Is the T9xxx familly supported?
Thanks,
Andrei

hi N200,
Welcome to Lenovo Community Forums!
This Maintenance Manual should list what is compatible with it.
Any WLAN that's not on the list will not work.
All WLAN that's on the list should have a Lenovo FRU sticker on it, if it does not have the FRU sticker even if the same model, it may not work.
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/42x3553_03.pdf
If you are looking for a more recent or Latest WLAN adapter,
I suggest you purchase a USB WLAN that could meet your preference.
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Lenovo n200 3000 upgrading GPU

How can I upgrade my gpu on my Lenovo? I know its soldered but is it a complex job to resolder a new one? I haven't seen it myself so I don't know, Is it micro soldering? If I can what GPU's can I replace it with? If not how would I overclock it? I know the precautions, I have lost my warranty long ago, as it is past 2 years old. If overclocking is my only option, is there some guidelines and programs that you can supply? And if I can upgrade my gpu, are there also guidelines to follow and instructions? Thanks

Hi Mennims,
Welcome to Lenovo Community Forums!
I’m glad to inform you that the GPU in the computer can be upgraded according to the details provided in the below link under “Video” option, however I would Strongly Suggest Calling Technical Support for Assistance, Click here to open a link where you can select the country and get the exact contact support number, I’m sure they will be a great help.
Detailed specifications - Lenovo N200
Hope this helps!!!
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Memory problem on a Lenovo 3000 0769-BAG

Hi !
I own this nice machine, and put into it a Linux 64 bits OS. (Fedora 7).
Everything is working fine, but I needed more memory to be able to scan/process large images.
So I went to Lenovo web site and saw I needed PC2-5300 Sodimm memory. For a maximum of 4GB.
I've bought 2 Sodimm labelled like that : 2GB DDR2-667Mhz-CL5 based upon 16 chips labelled PR128MB-3 "Made in Taiwan" ...
So I removed the 2 512MB modules and put the 2 2GB modules. The BIOS see them and count up to 4096 GB. Fine.
But after POST, Nothing happens. No beep no disk activity, no nothing. The message "Press F1 to enter BIOS or F12 for boot menu " disapears, the cursor goes on the upper left corner and that's it.
So I removed the first 2GB module and put an original 512 MB instead. The machine boots fine, I'm able to successfully test the RAM either with the Vista boot menu option or the Memtest which came with Fedora.
I've swapped the 2 GB module and done the very same test. OK. So I'm pretty confident on the operation of the 2 2GB modules. Vista and Fedora proudly announce near 2.5 GB of memory (depending of the shared memory assigned to the Intel Graphic card)
If I put the 2 GB module on the first slot, and the 512 MB atop, the machine refuses to boot.
So, Either there is a problem with my memory modules, or there is a problem accessing the maximal capacity using 2GB modules ? What do you think and what should I do ?
TIA !
Oh, BTW the BIOS is 68ET21WW (V1.05)

Very curious indeed!
You mention you have BIOS V1.05, the latest on Lenovo is V1.02 but with the same number 68ET21WW that you have. Typo?
Are there any memory settings in BIOS that you can play with?
Put in a 512/2GB combo, go to this webpage from Crucial, scroll down and have it scan your system.
Repeat with the other 2GB. What are the results?, are those 2GB sticks what they are supposed to be?
As you run Linux, I am at a dead end here, no knowledge.
I assume you have installed (not just downloaded) all the Lenovo updates for Windows?
A 32-bit OS can only address 3GB, so 4GB would be a waste.
A 64-bit OS (both Linux and XP or Vista) should be able to work with 4GB.
Can you borrow a 1GB stick and see if it works with 3GB?
EDIT:
After hunting around on the web, it seems that there is a RAM limit for the Lenovo 3000 N100.
Also, Lenovo says this on their website:
1 GB (footnote 4) (2-512 MB DIMMS) PC2-5300 DDR2 667 MHz memory, expandable with optional SDRAM SO DIMM module to a maximum 2.0 GB (footnote 5)
Support Center: 800-426-7378
4: For PCs without a separate video card, memory supports both system and video. Accessible system memory is up to 128 MB less than the amount stated, depending on video mode.
5: Memory options up to 1024 MB PC5300 DDR2 SDRAM SO DIMM can be added for maximum memory expansion.I picked up somewhere that some BIOSes test for an original Lenovo RAM stick, but could not find this reference again.
If you get that 1GB + 2GB working, that will be the max, otherwise hope for a new BIOS that will allow for 4GB.
On Buy.com (sells Kingston RAM), several users reported success with 2x 1GB Kingston RAM.
Message Edited by RealBlackStuff on 02-03-2008 11:50 AM

Lenovo N200 3000 BFG Integrated Camera issue

Hi all
I dont know if this problem has ever been posted. I have a problem that my camera sometimes works fine with MSN messenger and also with Yahoo. But sometimes when I try to start webcamm it says that "camera not found" on both MSN and yahoo. Once it started working again after deactivating, activating this camera and restarting my PC. Has anyone experienced this?
Need help
Thanks

Guys, try checking the power-off state of device in device manager.
it may happen so that laptop turns camera off to save energy.
So check all tabs of device in device manager to be sure there's an option "do NOT allow to turn the device off to save power"
HTH
//help will save the world

Lenovo G500 USB2.0 HD USV Camera driver

So My laptop started having my Camera missing, i have tried reintalling camera drivers and so one nothing, and i accidnetally removed the driver in device manager, anyway i can get my camera working again, i need to skype and do serious business calls, I am starting to dislike lenovo , i cant even connect to devices on bluetooth any help?

Hi Reluarea,
Welcome to Lenovo Community Forums!
I’m sorry to hear that your G500 Laptop is crashing even after installing the graphic driver and selecting the GPU as the default usable hardware. Below is the link to automatically scan the computer and install the latest driver for the computer and a link to check the Game compatibility before playing it:
AMD Driver Autodetect
Game Compatibility Check
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Errors when i first long on to my lenovo n200 3000

i get 3 error messages...also i have another problem.
when i try to switch on my laptop it gets to the windows loading screen and powers of... i have to attempt to switch it on 5 times and then it finally works. please help me sort this out.
"error loading
c:\windows\system32\gifuyovi.dll
specified module could not be found"
"error loading
c:\windows\system32\goradoja.dll
specified module could not be found"
"error loading
c:\windows\system32\bimewefi.dll
specified module could not be found."
Those are the 3 error messages the come up every time i start my laptop and log in....
please help me with this. any help would be appreciated. btw i am running windows xp and do not know lots of tech talk.
i know some basics so please explain.
BTW is OS what your operator is...such as windows xp, vista

pesh wrote:
BTW is OS what your operator is...such as windows xp, vista
Yes, you are correct. OS = Operating System - XP, Vista, Linux etc.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Lenovo N200 3000 gpu temperature

Hi there.
I have notice that my gpu temperature is over 65 C (149 F).
I have cleaned gpu fan and dust over the fan. Is this temperature normale for this time of year or I should visit the service.
Thank you for any answer.

Does the laptop bottom feel HOT?
My thoughts:
Everest may be reporting wrong temp?
GPU heatsink may need new thermal interface compound?
Use a cooling pad.
If you do not experience lockups and bluescreens, it may be fine.

Lenovo 3000 N200 ( 0769- A63) 0769 BAG processor upgrade limit and type

i have folloing system properties
TYPE
0769-A63
07/12
Name
Lenovo 3000 N200 Notebook (0769-A63)
Specs
Based on 0769-BAG: T2330(1.6GHz), 2GB RAM, 120GB 5400rpm HD, 15.4in 1280x800 LCD, Intel X3100, CDRW/DVDRW, Intel
802.11abg wireless, Bluetooth, Modem, 10/100 Ethernet, Secure chip, Fingerprint reader, Camera, 6c Li-Ion, DOS
License
Chipset: Intel 965 Express Chipset probably
i want to upgrade my processor to core2duo etc
what will be the type/types of processor/s that can be used to upgrade it and what is the upper limit of speed of processor that can be attached
thanks
Moderator Note; s/n edited for member's own protection

Wow, thank you, what an awesome little tool!
So, I found that these 2 RAM products are compatible with my laptop:
Part Number: CT758799
Module Size: 2GB
Package: 200-pin SODIMM
Feature: DDR2 PC2-6400
Specs: DDR2 PC2-6400 • CL=6 • Unbuffered • NON-ECC • DDR2-800 • 1.8V • 256Meg x 64 •
Part Number: CT699699
Module Size: 2GB
Package: 200-pin SODIMM
Feature: DDR2 PC2-5300
Specs: DDR2 PC2-5300 • CL=5 • Unbuffered • NON-ECC • DDR2-667 • 1.8V • 256Meg x 64 •
I then went to a well-known auction site and found RAM cards from the same manufacturer with exactly the same specs as above but with different Part numbers. Does it have to be the exact part number or do I stand a good chance of it working if it has the required spec? I searched for the exact part numbers and yielded 0 results.
Thanks for all your help on this.

Lenovo 3000 n200 Type: 0769 game graphics problem

Hi,
I have a Lenovo 3000 n200 Type 0769 laptop which served me well at university with my 3D modelling in SolidWorks for my projects. However, when I tried to run games on it, the games always crash, even on a very low setting graphics setting which is extremely frustrating. The only game I have managed to run successfully with no problems is Football Manager (providing I dont use the 3d game play as when I do, like all other games I have tried, it crashes.). What do I need to upgrade to successfully run games on my laptop and also, (if it is only a new graphics card that is required) where can I find out which cards are compatible with my laptop?
Running games is the only problem I am finding with the laptop and any help anyone can give me will be very much appreciated as I see a few other people who have posted in the forum have had the same problem with no luck with help on here.
Cheers.
- Pete
PS. The games I have tried running with no success include; The Sims 2, Lord Of The Rings - Battle For Middle Earth 1 & 2, Command & Conquer Generals, Command & Conquer 3 and Warhammer Dawn Of War

I don't know about the desktops, but Lenovo laptops are the worst I have ever used. I have had mine nearly a year and the amount of problems I have had with it is rediculous, along with this problem, the hard drive has broken and needed to be replaced, the finger print scanner is broken and does not recognise the only finger prints that have been registered on the laptop, and now it has broken again and i cannot get passed the rescue and recovery screen. NO ONE should buy this laptop or any lenovo laptops like it, they are unbelievably unreliable!

How to enable execute-disable bit and other hidden settings on Lenovo 3000 N200 model 0769!

2008-11-16: I have posted some more settings, scroll down to message 19 in this thread to read them.
Hi,
Here's some good news for anyone with a Lenovo 3000 N200 model 0769, who is disappointed and frustrated with the lack of options in the BIOS setup menu. (I had a moan about that in this thread.)
This is a long post but I hope you'll find it worthwhile. Here are the features/settings which I will explain how to enable:
The BIOS disables the execute-disable bit function of the CPU, with no way to turn it on. You can enable it.
You can set VGA and VESA graphics modes to not be stretched to fill the whole screen (sharper graphics with no distorted aspect ratio).
Speed up the POST display by skipping the memory test
Disable various features (if you don't use them, that might save some power): the HD audio controller, WLAN card, on-board LAN, shadowing of the video BIOS
Enable beep before booting the OS
Enable key click sound (only in DOS, not Windows or Linux)
I'm still working on this, and hope to figure out more hidden settings soon, e.g. to disable the DVD drive and trackpad, and to change the video output from NTSC to PAL.
The information below applies to the Lenovo 3000 N200 model 0769 with BIOS version 3.03. My N200 has Nvidia graphics. For some background on the general principles/research required to figure this out, please see this thread at Wimsbios.com.
To change the settings, you need to create a bootable DOS floppy disk or USB drive. Download SYMCMOS.EXE (Google for it) and put it on the bootable disk. Boot the disk and run SYMCMOS to back up your current CMOS settings: SYMCMOS -Lsettings.txt
Next load the settings.txt into a text editor. It will begin like this:
( SYMBOLIC CMOS EDITOR - Version 643710-035 )
CRC = 3EDD
(0000) [0001]
(0003) [0001]
Your CRC value may differ. Each line after the CRC contains a token number, followed by the value of that token. You can start with the settings.txt you created and edit any tokens you want to change, or delete all token lines and just include the tokens you want to change. Then use SYMCMOS.EXE to apply the new file: SYMCMOS -V2 -Uupdate.txt
After running that command you can reset, and hopefully notice the new settings in action. (For certain settings, such as re-enabling the execute-disable bit, you need to turn the computer off then on again.)
Here are some specific tokens you can change:
Token Default New Description
(0000) [0001] [0000] Disable the HD audio controller
(0042) [0001] [0000] Disable LCD panel graphics scaling/stretching
(004B) [0000] [0001] Beep before booting the OS
(0267) [0001] [0000] Enable support for the CPU execute-disable bit
(028E) [0000] [0001] Enable key click (only works in DOS and BIOS setup)
(02A3) [0001] Set to 0 for slower memory test, or 2 (or 3?) to skip
test for faster booting, especially with 4GB RAM
(046E) [0001] [0000] Disable video BIOS shadowing. (Best to leave enabled.)
(0471) [0000] [0001] Enable 1MB memory hole at 15MB. (Best leave disabled.)
(0486) [0001] [0000] Disable PCI Express ports 1-6. This takes precedence
over the individual port bits below, and disables the
LAN, WLAN and (probably) ExpressCard port.
(0489) [0001] [0000] Disable PCI Express port 2 (WLAN card)
(048C) [0001] [0000] Disable PCI Express port 3 (maybe ExpressCard?)
(048F) [0001] [0000] Disable PCI Express port 4 (LAN)
For example, if you want to disable LCD panel scaling and enable the execute-disable bit, you would create a text file like this:
CRC = 3EDD
(0042) [0000]
(0267) [0001]
Some final points:
Loading the default settings in the BIOS setup menu will overwrite any changes you make using SYMCMOS.EXE. So keep that bootable disk around in case you need to re-apply your settings in future.
The token numbers above are specific to version 3.03 of the Lenovo 3000 N200 model 0769 BIOS. They might be different for earlier BIOS versions, and will be different for other models of computer.
Once you have created a bootable floppy disk with a text file containing your updated settings, you could create a bootable CD with the floppy's data on. Just boot that CD to restore your settings in future.
Before experimenting with randomly changing token values to discover other hidden settings, make sure you know how to reset your computer's CMOS memory! Changing some settings results in your computer becoming unable to boot, so you can't use the BIOS setup screen to reset. I wrote about how to reset the N200 model 0769 CMOS in this thread.
If you discover any other settings, please let me know.
Any changes made are at your own risk; if you "brick" your laptop don't blame me!
Message Edited by Donuts on 10-15-2008 09:45 AM
Message Edited by Donuts on 11-16-2008 11:35 PM

Hi Donuts !
My computer is a 3000 N200 0769BAG. It has a Dual Core Pentium and the information I get about the BIOS using lshw are :
========================================================================================
description: BIOS
          vendor: LENOVO
          physical id: 0
          version: 68ET35WW (04/16/2008)
          size: 106KiB
          capacity: 960KiB
          capabilities: pci pnp apm upgrade shadowing escd cdboot bootselect edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot biosbootspecification
====================================================================================
I've nothing telling me it is a 3.03 BIOS version but only got the BIOS file name (68ET35WW);
Is it the same BIOS you used and if not how could I find the list of (token, default value,new seting) for that particular BIOS ?
Thanks a lot in advance for your help !
Regards

Lenovo n200 3000 0769-BAG vista camera driver?

Similar Messages

Maybe you are looking for