Lenovo N200 3000 BFG Integrated Camera issue

Hi all
I dont know if this problem has ever been posted. I have a problem that my camera sometimes works fine with MSN messenger and also with Yahoo. But sometimes when I try to start webcamm it says that "camera not found" on both MSN and yahoo. Once it started working again after deactivating, activating this camera and restarting my PC. Has anyone experienced this?
Need help
Thanks

Guys, try checking the power-off state of device in device manager.
it may happen so that laptop turns camera off to save energy.
So check all tabs of device in device manager to be sure there's an option "do NOT allow to turn the device off to save power"
HTH
//help will save the world

Similar Messages

  • Lenovo n200 3000 0769-BAG vista camera driver?

    Hello my friends. I have Lenovo n200 3000 0769-BAG model laptop. My operating system is vista home basic x86. My integrated camera doesn't works sometimes. This event happens frequently at now. The camera driver is not original, it is automatically installed when vista operating system setup. So what can I do? Is there any original camera driver somewhere? Thanks a lot...
    p.s: (0689 type camera driver doesn't work at 0769-BAG.)
    Message Edited by gizsin on 04-28-2009 07:11 AM

    Hi !
    I have exactly the same laptop and I had the same problem.
    It was hardware related. The camera wire become loose and was not connecting sometimes.
    You can, if skilled, solve the problem yourself by following the dismantling videos and correctly plugging in the camera. If you route the cable correctly you'll solve the problem.
    Bear in mind that you need some tools, time as you'll have to dismantle quite all the laptop and skills in order not to make things worse... 

  • BIOS Update for Lenovo N200 3000 0769-ASU

    Hello,
    I want to upgrade my hard drive but I must upgrade my BIOS, but I cannot find a BIOS Update for Lenovo N200 3000 0769-ASU with Windows 7, any help or assistance is appreciated.

    Sorry for replying to an old post but I found one of theese laptops a couple of days ago where I work. (I work at a recycle station/place/something)
    I decided that I wanted to try and fix it since it suffers from the issue discussed here.
    I have about 15 yrs experiance with fixing computers and about 3 years with laptops and my repair succes rate is rather high.
    But this laptop is a piece of very bad and **bleep**ty workmanship - The whole upper part of the mainboard is toast - the part that is just under the connection to the batteri is badly burned.
    I will upload some pictures shortly, and give a detailed workaround if I get it fixed
    cheers

  • Spill milk on lenovo n200 3000

    I spilled milk on my lenovo N200 3000
    i just switched it off and removed battery.
    i moved laptop upside down so the milk dropped on the floor and left in an open air...
    i dont know what to do next.

    The only thing I know to do is to take it apart as much as you can to make sure there is no liquid anywhere. Then you can try powering it back on. Compressed air cans dry pretty good.
    IT Specialist and Consultant
    Lenovo Tablet Evangelist
    Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
    Deutsche Community   Comunidad en Español
    Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

  • My Lenovo n200 3000 power on problems..plese read more for full error story.

    My lenovo n200 3000 on switches on when i press the power button wait for the windows sign to appear. it then shuts down. then i press the button again and select start windows normally. i have to do this 3 times every time i switch on my laptop on!!! please help this is very annoying.

    This one looks like a hardware/software conflict. Go to service or you can try to do something yourself.
    I can give these advises:
    It can be software problem, so you can do this:
    1. You can restore your OS with last saved (fully working and starting) restore point.
    OR
    2. You can try to start Windows in SafeMode and: 1) try to find coflict driver in My Comp>properties>device manager (look for yellow "!"); 2) try to delete all lately installed drivers. 
    OR
    3. You can reinstall Windows in "clean" install. I mean with disk format.
    OR it may be hardware problem, so you should do this:
    1. It may be problem with power.
        Solution:
           - Try to start laptop without battery. Just with AC-adapter.
           - Try to start laptop just with battery.
    2. Maybe some detailes get out from slots.
           - You should open laptop and check every detail (hdd, ram etc). Get them out clen it and than put them in.
    N.B. In my desktop PC such thing was because of "Microsoft UAA High Definition Audio driver". It conflicted with my video. Also in my old laptop it was because my lcd was not fully plugged in.
    If nothing of these solve the problem go to the service.
    If you need translating agency - contact with me!

  • T420 Integrated Camera Issues

    I have the T420 with RHEL 6 running on the local drive and have Windows XP and a Windows 7 VM created in the Client for Linux virtual software.  I can not get the intergrated webcam to work at all in the VM's.  I've tried to load the driver but it won't finish due to the webcam not being found at all in Windows. It works just fine in RHEL 6, but no software is made for webcam chatting for this OS.
    Does anybody know how to get the webcam feature to pass through to the VM's?  I have added the USB device option in the Open Client for the Chiconey Electronics Ltd Integrated Camera.
    Or is this a supported opton at all? It would be very nice to be able to use the webcam.
    thx

    Hi keithrees,
    Please try install/overwrite web cam driver.
    Integrated Camera Driver for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP - ThinkPad
    http://support.lenovo.com/en_US/downloads/detail.p​age?DocID=DS015018
    Fred
    T61 + X201i

  • Lenovo n200 3000 upgrading GPU

    How can I upgrade my gpu on my Lenovo? I know its soldered but is it a complex job to resolder a new one? I haven't seen it myself so I don't know, Is it micro soldering? If I can what GPU's can I replace it with? If not how would I overclock it? I know the precautions, I have lost my warranty long ago, as it is past 2 years old. If overclocking is my only option, is there some guidelines and programs that you can supply? And if I can upgrade my gpu, are there also guidelines to follow and instructions? Thanks

    Hi Mennims,
    Welcome to Lenovo Community Forums!
    I’m glad to inform you that the GPU in the computer can be upgraded according to the details provided in the below link under “Video” option, however I would Strongly Suggest Calling Technical Support for Assistance, Click here to open a link where you can select the country and get the exact contact support number, I’m sure they will be a great help.
    Detailed specifications - Lenovo N200
    Hope this helps!!!
    Do post us back for further queries.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • T500 Integrated Camera Issues

    I have a brand new T500 with Vista Business 32 bit installed. The laptop came with an integrated camera. The camera appears in the device manager as working properly. However, when I go to control panel => scanners and cameras the camera doesn't appear in the list. I proceed to select Add Device where the camera is still undetected. I downloaded the most recent drivers from IBM's site and attempted the "have disk" method browsing and selecting the recently downloaded driver where it never lists a device that I'm able to install. Please help!

    I'm not sure why, but I think this is normal.  On my computer, when I set up Skype it found the camera right away, but it didn't show in the Control Panel Scanners & Cameras.
    Don Mannino

  • Lenovo N200 3000 gpu temperatur​e

    Hi there.
    I have notice that my gpu temperature is over 65 C (149 F).
    I have cleaned gpu fan and dust over the fan. Is this temperature normale for this time of year or I should visit the service.
    Thank  you for any answer.

    Does the laptop bottom feel HOT?
    My thoughts:
    Everest may be reporting wrong temp?
    GPU heatsink may need new thermal interface compound?
    Use a cooling pad.
    If you do not experience lockups and bluescreens, it may be fine.

  • Errors when i first long on to my lenovo n200 3000

    i get 3 error messages...also i have another problem.
    when i try to switch on my laptop it gets to the windows loading screen and powers of... i have to attempt to switch it on 5 times and then it finally works. please help me sort this out.
    "error loading
    c:\windows\system32\gifuyovi.dll
    specified module could not be found"
     "error loading
    c:\windows\system32\goradoja.dll
    specified module could not be found"
    "error loading 
    c:\windows\system32\bimewefi.dll
    specified module could not be found." 
    Those are the 3 error messages the come up every time i start my laptop and log in....
    please help me with this. any help would be appreciated. btw i am running windows xp and do not know lots of tech talk.
    i know some basics so please explain.
    BTW is OS what your operator is...such as windows xp, vista 

    pesh wrote:
    BTW is OS what your operator is...such as windows xp, vista 
    Yes, you are correct. OS = Operating System - XP, Vista, Linux etc.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • X220 integrated camera Windows 8.1 not showing up

    Hello,
    Im using X220 with Windows 8.1 Pro.
    Under Fn + F6 i have TouchPad, Wireless, Battery, Audio
    I installed:
    - Lenovo Power Management Driver 1.67.04.05
    - Lenovo Settings Dependency Package 2.2.0.28
    - Lenovo Solution Center 2.4.003.000
    - Lenovo System Update 5.06.0016
    - On Screen Display 6.71.00
    - Ricoh_media_driver_v2.22.18.01
    - ThinkPad UltraNav Driver 16.2.19.14
    - ThinkVantage Active Protection System 1.79.00.03
    And from Microsoft Store:
    - Lenovo Settings - which run when i hit fn+f6
    Non of driver updater find the built-in camera, same with Deviace Manager.
    Lenovo System Update dont download any camera related software.
    I understand that somekind of driver need to be installed to be able to turn on the camer.
    But non i found activate it.
    From what I read it should be in Lenovo Settings with Audio settings, but sadly nothing there.
    When I start the build in app "camera" from Windows, it tells me there is no atached camera.
    Those are the Lenovo x220 related installed application that showed up in Add/Remove Software.
     Sadly the only camera driver from Lenovo page which is: Integrated Camera Driver for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP - ThinkPad , dosn't help.
    Solved!
    Go to Solution.

    Thank you for confirming.
    Here's what I get for your MTM:
    ThinkPad X220 (4291-TGY)
    i5-2540M(2.6GHz), 4GB RAM, 320GB 7200rpm HD, 12.5in 1366x768 LCD, Intel HD Graphics,
    Intel 802.11agn wireless, WWAN option,Bluetooth, 1Gb Ethernet,UltraNav, Secure Chip, 6c Li-Ion,Win7 Pro 32
    I notice that there is no mention of a camera. Are you sure your X220 has the physical device installed?
    If you use your MTM and your serial number here: http://support.lenovo.com/us/en/ibasepartslookup
    you should get back a listing of the components installed in your machine at its build. The list can be somewhat cryptic, so please feel free to post it back here and we can dig further.
    Regards.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • 3000 N200 Integral Camera working only sometimes.​..

    I adjust my router settings and next time I log on I can access the camera with Yawcam and Skype. Then, next time I log in, the light next to the camera flashes but it won't work properly, i.e. neither I nor the person I'm calling can see my video screen. I can't detect any pattern to it working or not. Could it be something to do with dynamic routing?
    Any ideas will be gratefully receieved.
    Don
    empathy

    NoMoreNoise,
    I checked with a technical lead on this product, and the camera included with the 0769 type of N200, Lenovo 3000 Notebook has drivers which are native in both XP and Vista.  There are no separate Lenovo provided drivers for this camera.
    I note you say it doesn't show up in device manager.   If somehow those drivers have been deleted out of your OS install, I'm personally unsure how you would recover them, especially if they were lost prior to your last restore point.  You could reload the OS, but that's certainly a drastic measure.
    Another possibility is that the camera hardware has failed.  Is your system still under warranty?
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Lenovo 3000 V100, problems with integrated Camera

    Hello,
    I bought this Lenove a couple of years ago ( autumm 2007 ).
    equipped with Windows Vista, Location=Swedish.
    Since then I have had problems with the camera, on and off.
    The Camera was not working when I got home, I then got help from
    the support desk. Then later on it stopped working, now it is only showing a black
    box - either it could be after a Vista update or after a Lenovo update - I don't know.
    Is there anyone who could help me out here.
    Would like to use that camera, since it is integrated.
    Thanks for your help, Ink

    Hi Slape84,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that the integrated camera is not getting enabled even after trying to install the drivers for the camera. I suggest you to make sure the LEM (Lenovo Energy Management) is installed in the computer, if not please download it from the below link by selecting the exact Model Type of your G580 Laptop:
    Drivers and software - Lenovo Ideapad Laptops
    Then press Fn + Esc after installing the LEM in the computer this is the shortcut key to Turn on/off the integrated camera, now install the drivers for the integrated camera from the above link. But while installing while installing the driver right click on the downloaded file and select “Run as administrator” option to get it installed without any error.
    Do post us back if the issue still persists.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • T530 Lenovo Integrated Camera not working, Lenovo Camera Settings does not Display

    Hello, I have a new T530 with Windows 8 OS. I am having trouble using the integrated camera. It functions neither in the Windows camera app nor in Skype. In both cases I get a picture with a gray background and a camera with a line through it. In Device manager, the camera does appear, is enabled, and the drivers are up to date.
    After looking through other threads, I tried checking whether the camera was plugged in and indeed it was. When using Skype and I set the camera to on (Skype did detect the camera), I still got the gray no camera image, but the green light on the camera itself turned on.
    I also tried using Fn+F6 to check settings. Lenovo settings opens, but the when I click the camera settings Icon, the screen loads a blank page that says "Camera" in the top right and has a back button (left pointing arrow) in the top left hand corner. The back button does not seem to work and I must change the window to something else in order to exit/close settings.
    I tried manually installing both camera drivers and "power management" ("energy management"?) drivers. Neither of this solved either of these issues.
    Please help me to resolve this problem. Thank you.

    Hi, euterpenc
    I would make sure that the BIOS is up to date in the system. The current BIOS for your system is 2.07 and can be found here. Also, I would ensure that the chipset drivers are up to date, and those can be found here.
    Hope it helps, and let me know how it goes
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • Lenovo T420 Integrated Camera Crashes

    I have a Lenovo T420 and have some funky issue with my Integrated Camera. The camera seems to crash whenever I pull the display closer towards the keyboard. And if the display makes a 90 degree angle or less with the keyboard it never works. See below drawing for problem details.
    Can anybody help me shed some light on this weird problem and how I might fix it?

    It does not happen on my T520 with Fedora 18.

Maybe you are looking for

  • Field name and table

    Dear Friends , I want to display discount , P&F , excise , tax , fright , octori , insurance  so what is the fiels name for all fields and table name .

  • What is the roles of technical and functional consultants in ESS/MSS area?

    Gurus, What is the roles of technical consultants in ESS/MSS area? What is the roles of functional consultants in ESS/MSS area? Please help me see the differences. Thanks,

  • Delete old email address from cache on a MAC

    Has there been a solution to delete old email addrss from the cache on a MAC?  I'm not talking about iPhone or iPad devices.  The last discussion on this topic was back in 2012 and it doesn't look as if this was resolved. Bottom line, when you create

  • How do I change screen resolution in command line?

    Hi, I was controlling a remote server by Apple Remote Desktop and have lost control of it after changing the resolution. Is there a way to change the resolution in the command line, without restarting? If I can screen resolution in the command line I

  • Question on using Virtual PC with Access

    Right now I'm using 2 systems at my office, Linux SuSE and XP, both on different machines. I just ordered a PowerBook G4 and will be upgrading it to 2GB memory when it comes in. The PB is to replace my SuSE box and I'm wondering if I will need keep m