Lenovo N500-4233-5FG BSOD after Installing Drivers

Hello ,
I've installed the Windows XP , then Installed the Fast Ethernet driver and systemupdate 316 ,
Downloaded all the drivers , then got BlueScreen , the system doesn't boot up I get bluescreen everytime I try to turn It on , even on SafeMode , I have to install a fresh WinXP now ,
the question is , when I finished Installing WinXP , what do I do to not get BlueScreen ?

I reviewed the link provided for your Lenovo 3000 N500 [Model Name: 42335FG, Part Number: NS75Fxx]
Link:
http://www5.pc.ibm.com/europe/products.nsf/$wwwPartNumLookup/_NS75Fxx?open&OpenDocument&epi=web_expr...
At the bottom of the configuration table, under "SOFTWARE", it says "Supported operating systems" PC DOS 2000 (limited), Windows Vista Business, Windows Vista Home Basic, Windows Vista Home Premium.
It doesn't appear that the 3000 N500 [Model Name: 42335FG, Part Number: NS75Fxx] is intended to support XP.
What am I missing here?
Thank you
3000 C200 8922-2AU Laptop
Windows XP Pro
T5500(1.66GHz), 1.5GB RAM, 80GB 5400rpm HD, 15in 1024x768 LCD, Intel 950, CDRW/DVD, Intel 802.11abg wireless, Modem, 10/100 Ethernet, IEEE 1394, 6c Li-Ion batt.

Similar Messages

Drivers for Lenovo 3000 N500 4233-5FG notebook

Hi everybody!
yesterday I became my brandnew N500 4233-5FG notebook. Here are the specifications:
http://www5.pc.ibm.com/europe/products.nsf/$wwwPartNumLookup/_NS75Fxx?open&OpenDocument&epi=web_express
A friend of mine and I tried to install Win XP, but most of the drivers from the lenovo support HP don´t work. We´ve read lots of threads in this forum and all over the internet, but nothing helped!
Here is what we did till here:
1.switch from sata to ide
2.forcing the notebook to boot with the optical drive, because otherwise it showed no reaction on the Win Xp CD
3.installing Win XP
4.installing the drivers from http://www-307.ibm.com/pc/support/site.wss/product.do?template=/product.do?template=%2Fproductpage%2...
5.Win XP "runs" but almost all the drivers are announcing conflicts and as consequence nothing works (sound, LAN, and so on)
6.then we installed the net framework and tried the drivers described by the user voyager in this thread:
http://forums.lenovo.com/lnv/board/message?board.id=N_Series_Lenovo_3000&thread.id=8077&view=by_date...
7.nothing worked
8.then we installed Service Pack 3 for Win XP an tried again the drivers from the lenovo HP.
9.there was no improvement, which means there are always the same problems as at the beginning...
10. as it was 4 o clock in the morning and we had a very long day, we decided to go to sleep... ;.))
Can anybody help me and/or has anybody experience with exactly the same notebook than i have?? (n500 4233-5FG)
It would be very helpfull to have some suggestions on how to do it right or perhaps anybody knows something about were to find the right drivers?!?
Thank in advance and lots of greetings,
Daniel

I reviewed the link provided for your Lenovo 3000 N500 [Model Name: 42335FG, Part Number: NS75Fxx]
Link:
http://www5.pc.ibm.com/europe/products.nsf/$wwwPartNumLookup/_NS75Fxx?open&OpenDocument&epi=web_expr...
At the bottom of the configuration table, under "SOFTWARE", it says "Supported operating systems" PC DOS 2000 (limited), Windows Vista Business, Windows Vista Home Basic, Windows Vista Home Premium.
It doesn't appear that the 3000 N500 [Model Name: 42335FG, Part Number: NS75Fxx] is intended to support XP.
What am I missing here?
Thank you
3000 C200 8922-2AU Laptop
Windows XP Pro
T5500(1.66GHz), 1.5GB RAM, 80GB 5400rpm HD, 15in 1024x768 LCD, Intel 950, CDRW/DVD, Intel 802.11abg wireless, Modem, 10/100 Ethernet, IEEE 1394, 6c Li-Ion batt.

BSOD After Installing Boot Camp 5640 Drivers on Win7 x64

I get a BSOD after installing the Boot Camp 5640 drivers on Windows 7 x64 Professional due to "CACHE_MANAGER". If install the drivers individually, this does not happen (provided I don't run bootcamp.exe).
This wouldn't be a problem except that I can't get the trackpad working properly without running setup.exe or bootcamp.exe.

what is your exact rMBP
check here and make sure you are trying to install the right boot camp pkg for your windows version and machine
http://support.apple.com/kb/ht5634

HT5628 After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp "removed" the DVD drive!

After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp “removed” the DVD drive. I think there is an issue because I reinstalled Windows 8. If I don't install driver, then I have reduced functionality (no Apple keyboard, no sound etc), but once I install driver, I lose my DVD drive.

Hi, guys, I have had the exact same problem since the summer of 2010. Here's what I was able to find out.
Deleting upper/lower filters, running all those Fix Ya programs and other Microsoft crap is useless. This problem is most certainly has nothing to do with registry of any software on your computer. I took my HP 9620us to a couple of repair places and, they tried a lot of things and it appears that the root of this problem is a faulty motherboard connection. Of course, it costs about 400 bucks to fix it so I'm not sure I want to pay this kind of money.
Anyway, if somebody was able to fix it PLEASE post here to let us know. Again I am 99 per cent sure it's some piece of hardware in the motherboard.

Old X-Fi Platinum unrecognized even after installing drivers

Old X-Fi Platinum unrecognized even after installing drivers? I've got an old X-Fi Platinum card I bought more than 2 years ago (Model SB0460). When I first installed it a couple years ago (on Windows XP), it worked fine for a few months, then I started having issues about every 5th bootup where the card wasn't recognized. Simply restarting the computer would usually work. But after awhile, it finally quit being recognized. I thought maybe it was a problem with the drivers, which were old and buggy, so I took the card out and shelved it for a year and a half. I re-installed it today using the new drivers (2.8.0008), and everything installs fine until I reboot. Then I get the same old "Found new Hardware: Multimedia Audio Controller" popup every time, and the X-Fi drivers (that were there before the reboot) are nowhere to be found in the device manager list. ?
Is this a hardware problem or a software problem? This is a fairly new XP installation, and I spent weeks doing new installs and reformats a couple years ago when I had the original problem and that never helped, so I'm thinking it must be either the card is dead or a hardware conflict. FWIW, I'm using a Dell XPS 40 with the onboard audio disabled in the bios. Thanks.

I have the same problem! Running 32-bit XP SP2, Core 2 Duo with ASUS P5B Deluxe, with a MIDI keyboard plugged into the Li'veDri've of my X-Fi Platinum. Driver version 5.2.6.87 from 8/7/2006. Everything else on my computer works after I come back from standby, but not MIDI input. Most infuriating. The worst part is I know this will never be fixed...

T540p BSOD after installing driver with ThinkVantage System Update

Hello,
today I got my brand new T540p. Its was delivered without OS (Lenovo Campus). I downloaded the ethernet drivers and the TV System Update on a usb flash drive with my old thinkpad. After installing Windows 8 Pro, i installed the ethernet drivers to connect to the internet. Then i started the TV System Update and let it install all critical and optional drivers.
After the all drivers have been installed the machine wants to reboot, but now i am in a reboot loop. Everytime it hangs in the screen "Windows Update 100%" and then I see the blue screen of death (Driver Power state failure) and the machine reboots again.
Does anyone else have this problem or is there a fix from lenovo?
Thanks,
Mat

After fresh install of win 8 I only updated drivers from windows update. Works fine so far. Upgraded to win 8.1 still no problem. Use nvidia, wifi, intel graphics driver from windows update. Windows could not install chipset drivers. So I downloaded the intel chipset drivers from lonovo. Install crashes with bsod and ending up in reboot loop. I assume it's a problem with the intel drivers from lenovo. At moment I install win 8 again and I will try to install the drivers from intel website.

T440 - DWM service is crashing in windows 7 64 bit after installing drivers for USB Replicator

Dear All,
Good day!,
This will be my first post to the community and looking forward for an expert advise on the issue am facing with Lenovo ThinkPad USB Port Replicator with Digital Video drivers in Enterprise 64bit running on T440, following are the details:
Environment:
Windows 7 Enterprise 64bit installed on T440 where all drivers are up to date for all devices though (System Update 5) tool.
Requirement: Usage of Lenovo ThinkPad USB Port Replicator with Digital Video (M01060) which will be connected to .
Steps followed:
Connected to the port replicator before installing the device driver.
Download and installed device driver from the link: http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-73088
3. Issue: After installing the device driver above, system reboots and after logging back using the local admin account or any other windows account (DWM service) crashes along with any other software installed (Ms. Office, Lync, IE9, ...ext). Tried uninstalling the driver, rebooted and Windows runs smoothly again back with no errors.
4. Questions:
T440 hardware compatible with Lenovo ThinkPad USB Port Replicator with Digital Video ?
Which USB version Lenovo ThinkPad USB Port Replicator with Digital Video has ? (2.0 or 3.0) ? did I missed some special drivers for USB ?
Any other links for the above driver can be found for Win 7 Enterprise 64bit ?
For 3 days, am searching the web for a similar issue, found and followed all troubleshooting steps mentioned by others but none of them helped. I will really appreciate your support if any expert can advise. Thanks in advanced

I have the same problem with my T400 updated to Win 7 pro. Not happy.

BSOD after installing Boot Camp, AMD Radeon 6630M driver issue

I have reinstalled Windows using Boot Camp twice now and get a blue screen right after installing the Boot Camp drivers and restarting.
I am installing Windows 7 Ultimate 64-bit on my Mac mini 2011 edition. I created an install disk in Lion and used the option to copy the Boot Camp drivers into the disk.
I have narrowed the problem down to Apple's driver for the AMD Radeon 6630M graphics which my Mac mini has. The driver will install without errors but then the blue screen appears on next startup. If I use safe mode to uninstall the AMD driver, the blue screen goes away, but the display resolution is very low.
I checked for driver updates from AMD, but there are none for the 6630M.
Anyone else having this issue?

Hi,
I have installed Windows using Boot Camp and I also get the blue screen of death right after installing the Boot Camp drivers and restarting.
I am installing Windows 7 Ultimate 64-bit on a i7 Mac mini 2011 edition. I created the USB install thumb within Lion's Boot Camp, and got downloaded the latest Bootcamp drivers (bootcamp 4.0). I connect the mac mini to a 24" iiyama screen with a HDMI cable. I don't have a DVI cable anymore unless i would have checked that point too.
I have also narrowed the problem down to Apple's driver for the AMD Radeon 6630M graphics which my Mac mini also has. The driver will install without errors but then the blue screen appears on next startup. If I use safe mode to uninstall the AMD driver or renaming the atikmdag.sys file (the main cause of the crash), the blue screen goes away, but the display can't get the effects such as Aero interface.
AMD provides official drivers that don't recognize its own 6630m graphic card with Apple, then doesn't install any up-to-date driver... Only Apple's AtiGraphics setup program will install the drivers...but it makes Windows 7 crash at each boot.
Thanks for your technical skills or info to come over this issue (or releasing a bootcamp update ?)

Windows vista 32 Bit Ultimate. Black screen after installing drivers B-Camp

I installed windows vista Ultimate 32 bit on my 2.26ghz mac mini 2gb ram. after installing vista and setting up my account, i installed the drivers from the apple CD that came with the mac. it installed all the drivers and requested me to reboot, so i did. once i rebooted, i got a black screen with a thin green line through the center of the screen. i hear the bootup sound but that is all i see. Any tips or anything on how to fix this?

How did you solve this? I am having the same problem.

Touch Pad and Web Cam are not working after installing drivers also

Hiii
Synaptic Touch pad drivers are not working like not detecting the hardware so please help me on this
and
Webcam is not working like its not detecting even after installing cyberlink software given in the hp web site
please help me regarding this problems

1.Download hp support assistant.
2.Run it and go to the tab updates and tune-ups.
3.Click in the button check for updates. It will find you the updates.
4.Click in the button Download and Install.
5.When it finish restart your computer.
[link:http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html?jumpid=va_r602_us/en/any/psg/pl...
Also if it doesnt' work , you can also try :
1.Right click to the computer.
2.Click to the manage option.
3.Then select the device manager.
4.After that go to imagine devices and select your camera, then right click on it and select the option update the driver software do the same in the touchpad.
If and this doesn' t work unistall the drivers and install them again.

I get windows xp bsod after installing mac os x. please help.

Hi. I get windows xp blue screen of death after installing mac os x. Please help. I'm not a technical person. Thanks.

Boot into safe mode.
http://support.apple.com/kb/ht1564
Try OS X Recovery to run Disk Utility tests.
http://support.apple.com/kb/ht1343
Reset PRAM
http://support.apple.com/kb/ht1379

Random BSOD after installing port replicator drivers.

Hi, my boss just got a new laptop (TP T400s running Windows 7) and after configuring it, it was working fine. But then I installed the drivers for the USB port replicator with digital video and after rebooting, right after the login screen, it BSOD, complaining about igdkmd64.sys. Rebooted again, it didn't crashed upon login this time, just a little while later when clicking on the start menu. After more test, the replicator seemed to work, but not the digital video port. The DVI connector didn't worked correctly, just the mouse pointer was being displayed. Trying to set resolution didn't do anything and switching output source via Win-P provoked a strange flickering for a minute or so and then the machine automatically rebooted. Tried the driver found on the CD (1.0) and also those available through Lenovo website (1.5.6.8), always the same thing. Now I've uninstalled the drivers and the random BSOD keep reappearing.
Is this issue common? Is the port replicator faulty or is it the ThinkPad? Is the windows installation screwed, can it be repaired? What is Lenovo return policy?
I've also seen lots of complaints on this forum about random shutdown, this would be as unacceptable for us than the current BSOD we're experiencing. Is that situation widespread?
P.S.: We're trying to get work done, not beta test Lenovo products!
Thanks
Solved!
Go to Solution.

nbuduroi wrote:
Hi, my boss just got a new laptop (TP T400s running Windows 7) and after configuring it, it was working fine. But then I installed the drivers for the USB port replicator with digital video and after rebooting, right after the login screen, it BSOD, complaining about igdkmd64.sys. Rebooted again, it didn't crashed upon login this time, just a little while later when clicking on the start menu. After more test, the replicator seemed to work, but not the digital video port. The DVI connector didn't worked correctly, just the mouse pointer was being displayed. Trying to set resolution didn't do anything and switching output source via Win-P provoked a strange flickering for a minute or so and then the machine automatically rebooted. Tried the driver found on the CD (1.0) and also those available through Lenovo website (1.5.6.8), always the same thing. Now I've uninstalled the drivers and the random BSOD keep reappearing.
Is this issue common? Is the port replicator faulty or is it the ThinkPad? Is the windows installation screwed, can it be repaired? What is Lenovo return policy?
I've also seen lots of complaints on this forum about random shutdown, this would be as unacceptable for us than the current BSOD we're experiencing. Is that situation widespread?
P.S.: We're trying to get work done, not beta test Lenovo products!
Thanks
The win7 driver for the usb port replicator with digital output is not out yet. So, you cannot get it work under win7. I recall seeing an official flyer of the product, in which there is a line stating that a win7 driver will be out in December.

BSOD after installing Boot Camp 5 drivers on my MacBook Pro (13" mid 2012, non-retina)

Basically what the post says. I go through the normal rounds of creating a bootable flash drive (i've tried ISO files from 7, 8, and 8.1 -- all 64 bit versions), downloading the drivers either off the website, or through the Boot Camp Assistant, then I finally partition my disk equally and go through the normal install process with the version of windows. Everytime windows installs correctly and starts up just fine, but as soon as I install the bootcamp drivers (or any drivers at all, say the graphic drivers from intel's website) all **** breaks loose. Near the end of the bootcamp driver install on windows 7 it blue screens and shuts the computer down. In windows 8 and 8.1 it installs without a hitch then when I go to restart it the machine boots into the windows partition, shows the windows 8 logo with the loading circle thing under it for several minutes then I get presented with the new Windows 8 blue screen of death with the (sorry there was a problem loading your system ) on it. Then it shuts down, restarts and does it all over again. Someitmes it will try and "repair" the system on windows 8 start up but that never does anything.
I've tried what seems to be everything with this situation and still I get the same results. Even reinstalled OS X. I've searched the internet for hours upon hours for an answer and I've gotten nowhere. Any help would be greatly appreciated!
here are my exact system specs if anyone needs to know anything more than what I've posted in the title: http://store.apple.com/us/product/FD101/refurbished-macbook-pro-25ghz-dual-core- intel-i5
Thank you to anyone in advance.

Well, at least my Windows won't boot after renaming them to *.sys.old.
But anyway, these two drivers aren't the cause, instead it's actually BootCamp.exe and/or the trackpad or keyboard drivers.
This guy had the exact same problem and the 'solution' was to disable BootCamp.exe.
https://discussions.apple.com/message/10301692#10301692
I finally managed to install all Boot Camp updates but still nothing has changed; as soon as I launch BootCamp.exe or change settings for the trackpad the system crashes.
It seems I have two options now: Use Windows without "Tap to click", "Secondary Tap" and modified keyboard settings, or find suitable trackpad/keyboard drivers.
Speaking of which, is there any chance to get Boot Camp drivers for Win 7? Maybe this would solve my problem since I only have Vista/x64 drivers which I used for Win 7.
Thanks!

H55m-E23 bsod after installing graphics drivers

Hi,
Was wondering if anyone else had had a similar problem. Just built a system with a h55m-e23 mobo, i3-540 cpu and 4gb value ram. System works fine, will run for hours no problem, until i install the gfx driver for the onboard gfx. I have tried a pci-e card as well, same problem. As soon as drivers are installed bsod on next restart. I have tried win 7 32 and 64 bit, with all updates and without, with 1 stick of ram and 2 etc. have ran memtest it says all fine. Once it bsod, all i can do is go into safe mode. If i remove hd driver then it works fine, but obviously this isnt a suitable solution. psu is new, 450w, should be enough for mobo, cpu 1hdd and 1 dvd i would hope. Have tried drivers from disk that came with it, from windows update etc, exactly the same problem.
thanks in advance.

Quote from: dead_one on 22-March-11, 18:09:04
Hi,
Was wondering if anyone else had had a similar problem. Just built a system with a h55m-e23 mobo, i3-540 cpu and 4gb value ram. System works fine, will run for hours no problem, until i install the gfx driver for the onboard gfx. I have tried a pci-e card as well, same problem. As soon as drivers are installed bsod on next restart. I have tried win 7 32 and 64 bit, with all updates and without, with 1 stick of ram and 2 etc. have ran memtest it says all fine. Once it bsod, all i can do is go into safe mode. If i remove hd driver then it works fine, but obviously this isnt a suitable solution. psu is new, 450w, should be enough for mobo, cpu 1hdd and 1 dvd i would hope. Have tried drivers from disk that came with it, from windows update etc, exactly the same problem.
thanks in advance.
Watts aren't everything. What is the make, model and +12v rail/s amperage of that PSU?

Installing XP SP2 on Lenovo N500 4233 74G

Hello
I would really apreciate it if someone could give me a hand on haw to install XPSP2 on my laptop, i read through the forums but some time advices contradict eachother, so im a bit confused, can someone give me a detailed guide on what to do and how to do it. the only thing that i managed to do was to change my bios settings from SATA to the IDE option.
Any assistance would be greatly apreaciate.
Thank you

Hi ibnmail and welcome to the community,
http://support.lenovo.com/en_IN/downloads/default.page?
Here's your driver page.
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Lenovo N500-4233-​5FG BSOD after Installing Drivers

Similar Messages

Maybe you are looking for

Lenovo N500-4233-5FG BSOD after Installing Drivers