Lenovo NeXtScale N1200 Enclosure is a customized solutions for your applications

QuestionDo you need a customized solutions for your applications?
AnswerLenovo NeXtScale N1200 Enclosure is a customized solutions for your applications that can be configured to meet your specific business needs. Lenovo NeXtScale N1200 Enclosure is the best solution for optimum compute power, GPU acceleration, maximum compute power, GPU or coprocessor and storage with the right I/O and networking. Since the NeXtScale platform is optimized for standard racks, it allows the mixing of high-density NeXtScale server offerings and non NeXtScale components within the same cluster rack. Lenovo NeXtScale System is comprised of compute nodes and chassis. The compute node is the nx360 M5 and the chassis the n1200 Enclosure. The chassis can house up to 12 half-wide nx360 M4 and nx360 M5 nodes. The Lenovo n1200 enclosure is a light chassis without integrated networking or switching. As a result, no chassis-level management is required. The nodes in the chassis with front access cabling would connect to top-of-rack switches installed in the same rack. Lenovo NeXtScale System is the data center solution for clients who are facing challenges such as physical space, budget, and low productivity due to late production readiness. Lenovo delivers NeXtScale, a dense platform that not only is cost optimized but also provides tremendous time to value by helping clients get on-board more quickly.

Thanks for the suggestion.
One concern I have is this package is developed for v12.0. According to SAP, these action blocks will work in 12.1 but not in 12.2. I've tried to install it on 12.2. The configuration dialog are not working properly.
Have anybody succefully implemented this package on 12.2?
Best regards,
Arnold
Edited by: Brad Arnold on Mar 2, 2012 11:53 PM
Edited by: Brad Arnold on Mar 2, 2012 11:55 PM

Similar Messages

Kelsey Anderson I may have a solution for your problem

Kelsey I may have a solution for your problem.

McAfee Site Advisor 3.4.0 just came out of the addons blocklist, and you have SiteAdvisor and even though that is the current version; nevertheless, you should uninstall it and reinstall it as noted in https://community.mcafee.com/message/203466 for a fresh version with only current files.
Also refer to http://kb.mozillazine.org/Problematic_extensions relating to McAfee Site Advisor 3.4.0 for more specific instructions.
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

CUSTOMIZED SOLUTION FOR MIRO MIGO ACTIVITY - INDIAN SCENARIO

Hello
Looking for customized solution to save time on the MIRO and MIGO activity. (Indian scenario)
MIRO for customs duty
MIGO for loading excise to inventory
Best Regards
Pankaj
Edited by: PANKAJ PATWARDHAN on Mar 7, 2009 3:53 AM

Hi,
In a normal import process, before the goods receipt, you are making invoice verification for Customs using MIRO and using Planned delivery costs as an option.
As the goods receipts doesn't exist, system is not proposing Customs conditions
As the goods receipts quantity is unknown and there always a possibility of partial invoice verification for the customs, system will not directly populate the values in MIRO.
Doing enhancements to populate this values may not be needed. Pls convince the user on the import process.
Any other option available for that, really dont know
Thanks

Custom Ringtone for your Contacts on Nokia N900

Hey guys,
Its great to know that We got Nokia N900 in India now.
Many of people searching for custom ringtone for their contacts. I have installed app for it and worked great, here is the screen of how to do it.
1-goto app manager and download Ringtino app ( name specified in attached screen )
2-goto contact and click on title not edit contact, u will get " custom Ringtone " as like my screen.
Let me know if anything needed.
my other post
/t5/Maemo-Devices/Nokia-N900-works-in-India/m-p/658528#M7963
Rasu
Pallipalayam
Attachments:
Screenshot-20100719-110252.png ‏50 KB
Screenshot-20100719-111207.png ‏79 KB
Screenshot-20100719-111256.png ‏56 KB

works great now. you should be fine.
@elie
nice new avatar...

Default Code Generation for a Custom Class for an Application Module

hi all
Oracle® Fusion Middleware
Fusion Developer’s Guide for Oracle Application Development
Framework
11g Release 1 (11.1.1)
with Jdeveloper TP3 ,
By default, the application module Java class will look similar to what you see in
Example below when you've first enabled it. Of interest, it contains:
■ Getter methods for each view object instance in the data model
■ A main() method allowing you to debug the application module using the
Business Components Browser
[package devguide.model;
import devguide.model.common.StoreServiceAM;
import oracle.jbo.server.ApplicationModuleImpl;
import oracle.jbo.server.ViewLinkImpl;
import oracle.jbo.server.ViewObjectImpl;
// --- File generated by Oracle ADF Business Components Design Time.
// --- Custom code may be added to this class.
// --- Warning: Do not modify method signatures of generated methods.
public class StoreServiceAMImpl extends ApplicationModuleImpl {
/** This is the default constructor (do not remove) */
public SRServiceImpl() { }
/** Sample main for debugging Business Components code using the tester */
public static void main(String[] args) {
launchTester("devguide.model", /* package name */
"SRServiceLocal" /* Configuration Name */);
/** Container's getter for YourViewObjectInstance1 */
public ViewObjectImpl getYourViewObjectInstance1() {
return (ViewObjectImpl)findViewObject("YourViewObjectInstance1");
// ... Additional ViewObjectImpl getters for each view object instance
// ... ViewLink getters for view link instances here
when i try this i didn't find the default generation for main method
have i do something before enable custom java file for Application module
hope to hear from you soon

hi nonStop
Since you are using Jdeveloper TP3, this might be a better place to ask your question:
"JDeveloper and OC4J 11g Technology Preview"
JDeveloper and OC4J 11g Technology Preview
success
Jan Vervecken

9.7.3 Default Code Generation for a Custom Class for an Application Module

hi all
Oracle® Fusion Middleware
Fusion Developer’s Guide for Oracle Application Development
Framework
11g Release 1 (11.1.1)
with Jdeveloper TP3 ,
By default, the application module Java class will look similar to what you see in
Example below when you've first enabled it. Of interest, it contains:
■ Getter methods for each view object instance in the data model
■ A main() method allowing you to debug the application module using the
Business Components Browser
[package devguide.model;
import devguide.model.common.StoreServiceAM;
import oracle.jbo.server.ApplicationModuleImpl;
import oracle.jbo.server.ViewLinkImpl;
import oracle.jbo.server.ViewObjectImpl;
// --- File generated by Oracle ADF Business Components Design Time.
// --- Custom code may be added to this class.
// --- Warning: Do not modify method signatures of generated methods.
public class StoreServiceAMImpl extends ApplicationModuleImpl {
/** This is the default constructor (do not remove) */
public SRServiceImpl() { }
/** Sample main for debugging Business Components code using the tester */
public static void main(String[] args) {
launchTester("devguide.model", /* package name */
"SRServiceLocal" /* Configuration Name */);
/** Container's getter for YourViewObjectInstance1 */
public ViewObjectImpl getYourViewObjectInstance1() {
return (ViewObjectImpl)findViewObject("YourViewObjectInstance1");
// ... Additional ViewObjectImpl getters for each view object instance
// ... ViewLink getters for view link instances here
when i try this i didn't find the default generation for main method
have i do something before enable custom java file for Application module
hope to hear from you soon

hi nonStop
Since you are using Jdeveloper TP3, this might be a better place to ask your question:
"JDeveloper and OC4J 11g Technology Preview"
JDeveloper and OC4J 11g Technology Preview
success
Jan Vervecken

Custom signature for TOR Application

Hi,
I want to create custom signature to produce alert whenever any machine lunches TOR application, i have searched and found that there already two signatures cretaed 5816/0 5816/1, i have enabled them and tested it did not fire.
I have ips in promoscous mode monitoring all vlans, working normally. I dont have ssl interception @ any device, so once TOR is establish then i dont have visibilty over the traffic.
i need help in creating usch signature, i have took wireshark capture of traffic and all i can see on application layer is proxy connect and proxy port (see attached)
thanks for your help.

Hi nkumarsr,
I have cretaed tcp string signature for ports 9001, 9090
and also i have added it in builtin signature 5816/0 and 5816/1
i have luanch TOR and it is not fired, i took capture on client PC and seached for tcp.port == 9001 and 9090, it is not showing.
do u have any other ideas ?

XRPM: replace 'item dashboard' by customer webdynpro for abap application

Hi guys,
I want to replace my item dashboard application to be replaced by a customer WD4A. Within this application I will select from a tree structure a project.
Now the questions: How to controll the standard context menu in the portal during this proces ? Do a need to call an API to get back my context menu ?
Does anyone know ?
Cheers, John

Are you sure you want to entirely replaced the dashboard? If you're on 4.5 you can enhance allot of the RPM dashboard in the WD component /RPM/UI_DASHBOARD.
You still have to fill the RPM cache object if you want to use the detail iViews for example Element Details.
What exactly do you want to achieve?

Custom Page for your iMix

Is there anyway to customize the page you create for the iMix? Ie: The Greenroom page or the Rolling Stone Celebrity Playlist. The page has tabs for multiple artists or mixes.
I'm trying to create a custom imix page for our company, and something like this would be ideal. We are going to give out gift certificates for the value of the imix, and customers could download the mix if they wanted!

It is not something iTunes users can do.
The pages you mention have been set up by the iTunes store staff.
You could try contacting them and seeing if they can do it for you.

Solution for your frozen Zen V Plus

Hey peeps ,
i just found this vid on youtube .
it shows you ow you can fix your frozen V plus .
i fixed mine some minutes ago .
It really works , but it's on your own risk . warrinty is not guilty anymore than , but it works again .
http://youtube.com/watch?v=aILm_-djY

Just ignore this post. I shoved a toothpick harder into the reset button and it finally did reset. Thanks anyways!

Custom Realm for SJSAS 9.x using JAAS documentation too vague

Hello there,
I am trying to implement a custom realm for a particular web application on my SJSAS 9.x server. So far I have been unsuccessful and receive the following message in my server.log:
[#|2006-10-20T13:51:56.390-0300|INFO|sun-appserver-pe9.0|javax.enterprise.system.core.security|_ThreadID=11;_ThreadName=httpWorkerThread-8080-1;javious;|SEC5046: Audit: Authentication refused for [javious].|#]
The documentation I have been using for reference is at:
http://docs.sun.com/app/docs/doc/819-3659/6n5s6m58k?a=view#beabs
However, I have a number of questions.
First of all, this section referenced by the URL above is identified as "Creating a custom realm". Then the second sentence of this section states "Note that client-side JAAS login modules are not suitable for use with the Application Server". Does this not mean that JAAS login modules are not suitable for use with SJSAS web applications since they are components of the Application Server? Is there a reason for providing information on creating a custom realm for this application server in which it is not suitable for? Why isn't it suitable for the application server? What if I want to implement my own realm for my web application so that I can maintain my application users separately in another application?
Secondly, this section explains that I can create a custom realm simply by creating a custom JAAS login module and a custom realm class. It then goes on to explain how to construct these classes and what to include in them. Notably, the documentation states the following:
The authenticateUser() method must end with the following sequence:
String[] grpList;
// populate grpList with the set of groups to which
// _username belongs in this realm, if any
return commitUserAuthentication(_username, _password,
_currentRealm, grpList);Having looked at the API for authenticateUser I discovered that it is a void method, however the documentation states to return a value from "commitUserAuthentication(..). Also, my commitUserAuthentication method only excepts a single argument of type String[] representing a list of group names, therefore I am unable to supply the additional arguments as documented. This is confusing.
Once finished reading the documentation, I am left hanging with hardly a clue as to what to do with these two new classes. Now having implemented a custom login module on Tomcat 5.x in earlier days, I did happen to have some experience to know to edit the security.properties, policy, and login.conf files. So anyhow from here I end up stumbling blindly through configuration of my domain1/login.conf and domain1/server.policy files. I also attempted to add my new realm within the admin console under security/realms and dropped my new jar file (with two classes) into the app server lib directory.
All in all, this completely fails to work. I have even placed System.out.println statements in all of my implemented methods and none of this actually shows up in my server.log file. Why is this section so vague? Why isn't there a step-by-step example from start to finish of how to implement a simple custom realm in SJSAS9?
Does anybody have any helpful suggestions?

Well, once again, I'm going to have to provide my own answer.
After much waiting and then deciding to invest much time researching documentation and tracking down information to assist in my solution, I have manage to find the golden egg for my own recipe of a solution.
In addition to the very helpful info I have found at:
http://developers.sun.com/prodtech/appserver/reference/techart/as8_authentication/index.html
I have mange to get my custom realm to work with the additional configuration of my sun-application.xml for my ear file. Even though I only wanted to specify my custom realm for my web.xml file, it turns out that in addition to this, I had to also define it in my sun-application.xml file (manually in XML text mode - within Netbeans 5.5) as follows:
<sun-application>
    <realm>mycustrealm</realm>
    <security-role-mapping>
        <role-name>mycust_role</role-name>
        <group-name>mycust_group</group-name>
    </security-role-mapping>
</sun-application>

How to create custom template for webcenter portal application

Hi,
I created webcenter portal application in my jdev using the webcenter portal application template provided by the webcenter framework.
I tried to create custom template for my application by following steps:
1. Created new application using webcenter portal application template with all default package structure.
2. Right click pagetemplates folder under webcontent package and select new option.
3. New gallery opens up.
4. Selected JSF under webtier and JSF Page Template under items in the right hand side and clicked Ok button.
5. New wizard opens up for creating new JSF page template.
6. Gave template name(file name) and Page Template Name(template def name).
7. Selected checkbox staing start a Quick Start Layout and selected three column layout and selected Ok.
8. Selected checkbox for Create Associated ADFm Page Defination(so that page templates can be changes at run time).
9. Created some Facet Definations (header, footer, content1, content2, LHN, RHN).
10. Clicked Ok button which will create custom template.
11. Added some Panel Group Layout component from Component Palette.
12. Created new page (.jspx) with this template.
Now when I try to add producer portlets created using Producer Portlet application template and connected to the above application using WSRP2.0, I'm facing problem.
The prolem is that I'm not able to add more than one portlet in one single page?
Kindly let me know whether the steps followed by me is wrong some where and needs to corrected and let me know how I can add more than one portlet to page?
Basically I cant see more than one placeholders in my page to add portlets.

Thanks Yannick.
In the step 9 I had mentioned that I created various facet definations (header, footer, content, content1 RHN and LHN).
Is this is not facet you are talking about or should I drop facet ref from the resource palette?
Can't I add moer than one portlet to my page at design time itself?
Annoying since in weblogic portal we do this at design time(.portal).

What are solutions for a way-too-big database?

Hi guys!
I'm a software developer and not very good in database designing. One day, I was asked something like this :
"For example, there is a company with a web application. One day, the database for that application is way too big, caused performance issues and others, what is the solution for that application database?"
At first, I thought that was about using multiple database with single app. But I don't know if I was right.
I want to ask that what are the solutions? If it's "multiple database" then what should I do? Using two connection to 2 database simutaneously?
I appreciate any replies. Thanks!

847617 wrote:
Thanks Lubiez Jean-Val... for your links.
I've got some more advices like :
- "transferring workload to another database using different techniques to copy the data from original db"
- "redesign of the database"
So that means we use 2 different databases?Sometimes it is deemed desirable to keep only fairly recent data on the OLTP database, where the normal transaction activity happens, and replicate the data to another database that also contains historical data. This second database is used for heavy reporting tasks.
And "redesign"?As in, design it from scratch and do it right this time. Make sure all data relations are properly defined to Third Normal Form; make sure all data is typed properly (use DATE columns for dates, NUMBER columns for numbers, etc); make sure you have designed effective indexing; make sure you use the capabilities of the rdbms and do NOT just use it as a data dump.
See http://www.amazon.com/Effective-Oracle-Design-Osborne-ORACLE/dp/0072230657/ref=sr_1_3?s=books&ie=UTF8&qid=1301257486&sr=1-3
are they really good solutions?Like most everything else, "It depends"
It depends on if the proposed solutions are implemented properly and address the root problem. The root problem (or even perceived problem) hasn't yet been defined. You've just assumed that at some undefined point the database becomes "way-too-big" and will cause some sort of problem.
It's assumed that we don't have or can't use partitioning.
And why is that assumed? Yes, you have to have a version of Oracle that supports it, and it is an extra cost license. But like everything else, you and your management have to do a hard-nosed cost/benefit analysis. You may think you can't afford the cost of implementing partitioning, but it may be that you can't afford the expenses derived from NOT implementing it. I don't know what the case is for you, but you and your management should consider the factors instead of just rejecting in out of hand.
:):)...You are making me - a student so excited about the history. From slides rule to the moon....
Edited by: 847617 on Mar 27, 2011 10:01 AMEdited by: EdStevensTN on Mar 27, 2011 3:24 PM

Custom icon for my USB flash drive?

Alright, now I realize I'm probably missing something here, but it's getting away from me here. All I want to do is have a custom icon for my flash drive that will show up on any Mac that I plug it into.
As it is, I can assign a coustom icon (by doing the old get-info-copy-and-paste-the-icon thingie), but it doesn't show up when I plug it into another Mac. I just get the generic disk icon. What am I missing? This has to be quite simple.

Trey,
I may be PITW, but I think the icons used to represent various volumes/devices are (if customized) specific to a system (not the volume/device). Thus you would have to set the custom icon for your flash drive on each system you wanted to see it.
A WAG: I haven't the slightest idea if it would work for a flash drive, but for a CD one would drag the custom icon (.icns file) to the root level of the CD and rename it .VolumeIcon.icns before burning the CD.
Lee C
"The early bird may get the worm but the second mouse gets the cheese." -- Willie Nelson
See the article Backup::Restore.
Dual 2.5 Power Mac G5 Mac OS X (10.4.3)

Custom Icon for Windows.exe from a Mac

It doesn't seem possible to insert a custom icon for a Windows executable when working on Captivate on a Mac, is that right? The documentation (below) seems to gloss over this shortcoming.
Custom Icon
You can customize the icon that is displayed for the executable file. Click Browse (...) to add a custom icon for your file. Ensure that the icon file has a .ico extension (on Windows)/.icns (for Mac).

I tried submitting this same problem as a feature request and/or bug report.
Unfortunately, and somewhat disconcertingly, the Captivate Bug Report form also doesn't work. No matter how thoroughly I entered my request, I got these error messages:
The following error(s) must be corrected before this form can be completed:
Please enter your name
Please enter your E-mail address
Please select if it is feature request or the bug report.
Please select a product
Please enter the issue description

Lenovo NeXtScale N1200 Enclosure is a customized solutions for your applications

Similar Messages

Maybe you are looking for