Lenovo not working with samsung Lcd TV.need advice...

I am using a Lenovo 3000 N100 series AQ1 768 laptop.Its got no external graphics card.I want to connect it to my Samsung LA32B550 LCD TV via a vga cable.
I have all the hardware fixed but there seems to be something missing on the configuring section of the laptop settings that i am missing out on.I have installed the Presentation Director for lenovo 3000 series and also using the hotkey Function + F7 .still the problem persists and i do not get the output on the lcd screen.
One thing i should let you know is that as soon as i am turning on "attached" in the second monitor option in the display settings it turns active but when i say apply it reverts back to inactive.and the Presentation director says theres a configuration problem on the display.
Any help in this issue would be highly appreciated cause i the purpose of spending so much money on the LCD is to see the output on television of the animation work i do.Hence i need the output on screen .
Thanks a lot in advance.

Hi, I am totally new to this kind of tech. I have been wanting to connect my Lenono n100 to an analogue LCD TV. I would like to watch streamline movie on the TV. Is this possible.
Can you tell me how to connect the n100 to your Samsun LCD TV via vga cable? What about S-video? does it work? thanks in advance
nabchak wrote:
I am using a Lenovo 3000 N100 series AQ1 768 laptop.Its got no external graphics card.I want to connect it to my Samsung LA32B550 LCD TV via a vga cable.
I have all the hardware fixed but there seems to be something missing on the configuring section of the laptop settings that i am missing out on.I have installed the Presentation Director for lenovo 3000 series and also using the hotkey Function + F7 .still the problem persists and i do not get the output on the lcd screen.
One thing i should let you know is that as soon as i am turning on "attached" in the second monitor option in the display settings it turns active but when i say apply it reverts back to inactive.and the Presentation director says theres a configuration problem on the display.
Any help in this issue would be highly appreciated cause i the purpose of spending so much money on the LCD is to see the output on television of the animation work i do.Hence i need the output on screen .
Thanks a lot in advance.

Similar Messages

Iphone not compatible with Samsung LCD TV

Hi, I have an Iphone4 and a Samsung 6000 series LCD TV. I've tried tv out through an Iphone dock to the tvs AV input .... ie the three phonos into a single jack av lead. The iphone says playing to tv but the tv says "no device found". I rang Samsung and they say that the iphone is totally incompatible with Samsung tvs and will not play even through a different device. Does anyone know different please ?
I was thinking of getting a Zepellin, but seems this will have the same issue !
Any help greatly appreciated.
Cheers

I read the user manual for the series 6000 TV and it should work with either component or composite from the iphone4...
I dont see details on the dock you are using, but if it has a video out on the dock itself chances are it is old... apple changed over to the universal dock and the video is embedded in the 30 pin
The component and composite format is a video standard that apple has nothing to do with every digital TV i have tested it on works fine (Sanyo, Dynex, Viewsonic).
I good way to check for sure:
1. try connected another video source to the TV (DVD player, camcorder etc)
2. try connected your iphone4 video to another TV
But if it is an old dock, that is most likely the problem, the only video cables that should work are the 30 pin to component OR the 30 pin to composite
good luck

My extension does not work with firefox 5 and need to be able to download firefox 3.6 or 4. every time try to find it it keeps directing to 5 which does not work with our gaming extensions, the features do now work with f/f5

My friends and I play Kingdom of Camelot, we use the greasemoney extension and various user scripts to play our game, the features in the extension do not work on verison 5 of firefox at this time, and we need to reload either firefox 4 or 3.6 to make them work efficiently.
Every time we go to download version 4, we get redirected to version 5 which we do not want.
I have am Mac laptop and a Windows laptop and would like rectify the problem on my laptops so I can play my game more effectively.
Regards
Monique Fornier

Yep, I understand...
This is the final news I needed to get to complete my answer... I confronted myself the italian store and the US one and in the US one I didn't find this product...
As for the NI software, was so good that I just bought back my good "old" iMac G5 and will exchange it with this my Intel Mac. The G5 2 Ghz was good, performing as this new Intel (at times I even got the impression was more performing, but I believe is just an impression) and surely didn't have so many 3rd parties problems.
Meanwhile I filled every forum of NI and USB with my questions about the compatibility... and maybe I will be back to an Intel Mac when all would be OK, I'm not in a hurry!
By the way I had a listen to your work: GREAT!
You may hear a sketch version of something we did work on with the NI piano and choir sounds, while the alto sax is played live and the other instruments are from Apple or real keys (yes, we mix a lot of things):
http://www.garageband.com/song?
while here is a track where we did use both the Orchestral sounds of Garageband (and some of it's loops, mixed with some good old programming) together with some NI sound:
http://www.garageband.com/song?
We do not often use orchestra if not as here and there (other than in some work as this last one, but is not so frequent). Hope you may like our little works!

FF wil not work with Flash and i need it to work even though Flash is obsolete.

I use the latest ver of Flash and the latest ver of FF. EVERYTHING works in Chrome but I prefer FF.
Can you please fix FF.
Look, I know that Flash is obsolete and will disappear but for some reason it persists.
What can you do?

Next time you get the error, could you make a note of the exact text (or grab a screenshot and post it)?
If it says that the plugin ''crashed'', Firefox may have logged detailed data about the crash that you can share with forum volunteers. Please see the last section of this article about how to extract crash report IDs: [[Firefox crashes]].

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

When I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

when I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

Ive got the same problem, just got my iphone unlocked, and they told me to sync it to itunes to get it permently unlocked, well everytime i plug my iphone in it says; it wont work as it needs up dating to 10.6.3, which i have already updated, but still doesnt work, so how can i get my phone unlocked?

Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing.

Intel 6205 wireless not working with Lenovo W520

Loving the new W520... very fast, if only the wireless would work. Unable to get wireless interface functioning, won't even show up in ifconfig. I've appended requested wireless information, thanks in advance for any assistance.
1) Machine Brand and Model (PC/Laptop):
Lenovo W520
Intel Centrino Advanced-N 6205
Note: Wireless switch on lefthand side enabled, bluetooth led lights up but wireless does not.
2) Wireless Brand, Model and Wireless Chipset:
$ lspci -nn
03:00.0 Network controller [0280]: Intel Corporation 6000 Series Gen2 [8086:0085] (rev 34)
3 ) check interface:
ifconfig does not show wireless
$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
4 ) Check for modules:
$ lsmod
iwlagn 215351 0
iwlcore 139688 1 iwlagn
mac80211 269644 2 iwlagn,iwlcore
cfg80211 167809 3 iwlagn,iwlcore,mac80211
5) Kernel boot messages
$ dmesg
[ 13.497936] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 13.497938] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 13.498058] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.498089] iwlagn 0000:03:00.0: setting latency timer to 64
[ 13.498181] iwlagn 0000:03:00.0: Detected 6000 Series 2x2 AGN Gen2a, REV=0xB0
[ 13.499187] lp: driver loaded but no devices found
[ 13.502642] alloc irq_desc for 22 on node -1
[ 13.502645] alloc kstat_irqs on node -1
6 ) Network configuration
$ sudo lshw -C network
*-network UNCLAIMED
description: Network controller
product: 6000 Series Gen2
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:03:00.0
version: 34
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress cap_list
configuration: latency=0
resources: memory:d5300000-d5301fff
7 ) Scan for networks:
not relevant as no wireless interface appears
8 ) Ubuntu Version:
Ubuntu 10.10
9 ) Kernel/architecture (including 32 vs. 64 bit):
2.6.35-28-generic x86_64
10 ) Restarting the network:
sudo /etc/init.d/networking restart
* Reconfiguring network interfaces... Ignoring unknown interface eth0=eth0.
[ OK ]
Additionally, modinfo shows the following:
$ modinfo iwlagn
filename: /lib/modules/2.6.35-28-generic/updates/compat-wireless-2.6.36/iwlagn.ko
alias: iwl4965
license: GPL
author: Copyright(c) 2003-2010 Intel Corporation <[email protected]>
version: in-tree:
description: Intel(R) Wireless WiFi Link AGN driver for Linux
firmware: iwlwifi-4965-2.ucode
firmware: iwlwifi-5150-2.ucode
firmware: iwlwifi-5000-2.ucode
firmware: iwlwifi-6000g2b-4.ucode
firmware: iwlwifi-6000g2a-4.ucode
firmware: iwlwifi-6050-4.ucode
firmware: iwlwifi-6000-4.ucode
firmware: iwlwifi-1000-3.ucode
srcversion: 8F7F4C6196599FCA596C837

Hi sparhk, and welcome.
One of the Lenovo staff who frequents the forum put out a call to help you in a private forum. I do a little Linux, so I poked into it. To my amazement my first Google hit was your thread where you indicate you have solved the problem. (At least, it _looks_ like you...)
May I respectfully suggest that a post back here indicating success would be a nice touch? That way anyone who passes by looking for help with this issue will have a better chance of finding it. For posterity, here it is (see post number 25):
[SOLVED] Intel 6205 wireless not working with Lenovo W520
Glad you got it working,
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

McAfee is not working with OS x 10.10.1 - do I need it

OS X Yosemite Version 10.10.1
I have an iMac (27 inch, Mid 2011)
Processor 2.7 GHz Intel Core i5
Memory 4GB 1333 MHz DDR3
Start up Disk Macintosh HD
Graphics AMD Radeon HD 6770M 512MB
This is my 1st posting for help, so please excuse me if I am not following the correct procedures. Yesterday I installed the latest update for Yosemite and at the end of the process I was advised that the McAfee security software would not work with the update 10.10.1. My question is do I need McAfee, or does my iMac have it's own Firewall and other security systems already in place. I would welcome any recommendations on alternative security packages, that members use, if they are working with this latest update.

Hi All... Long time Apple user and have enjoyed many many years without a thought about malware, virus' and trojans. However as this dialog progresses I would like to share an unfortunate reality... Life was fine and then one day my MacBook Pro started to labor when opening apps/managing multiple documents/etc.. the spinning wheel - and when I pulled up the option to Force Quit - each time it would show me that one or another of my apps was 'unresponsive'. (when I did not force quit the app - it did finally become responsive after a number of minutes) Next... noticed two things; at the same time that a mac app was unresponsive - the fan in my macbook was kicked into overdrive... and the casing above the keyboards had become super hot. Researched the issue that pointed me to the possibility of malware... Chose then what was best option McAfee to scan my computer.... and yes you guessed it - two cases of malware and a trojan. McAfee put them in 'quarantine' and I restarted my laptop... Like magic - no unresponsive apps - the fans were calm and the case was no longer excessively hot. This was great for about a month and then it happened again... ran the scan (with McAfee and Sophos) and found a new case of malware that was found in my email database and dated as received that day - once the virus was quarantined - my macbook was happy again. Now I run realtime virus scanner - seems like about 3-5 weeks and something will show up and - 99.9% time imbedded within an email - but computer is running as it should fast, cool and quiet.

Adobe acrobat 5 is not compatible with windows 7. Need replacement that will work.

adobe acrobat 5 is not compatible with windows 7. need a replacement that will work. any suggestions.

I would recommend Acrobat 10. You can find more details as well as a trial at http://www.adobe.com/products/acrobat.html?promoid=JOLIR. It should be noted though that Acrobat 5 is too old of a version to qualify for the upgrade price I am sorry.

I need to obtain an older version of firefox.. 4.0 is not compatable with my roboform. i need to uninstall it and reinstall the latest 3. something to get it to work right.

Question
I need to obtain an older version of firefox.. 4.0 is not compatable with my roboform. i need to uninstall it and reinstall the latest 3. something to get it to work right. where can i get the older version?

Get an update from Roboform.

My brother have given me his I-phone3, But he lives in US, he has given his phone in India, The sim card is not working with the phone. What should I need to do.?

My brother have given me his I-phone3 But he lives in US he has given his phone in India The sim card is not working with the phone What should+I need to do?

Send it back to him and have him unlock the phone for you so you can use it with your carrier.

Our online paychex will not work with Firefox 4. I need to go back to Firefox 3

We use Paychex online pay service. Their program is not working with Firefox 4; they say they can work with firefox 3

Thanks for your help. I purchased the snow leopard and am trying to install it but I keep getting the following message: "There was a problem reading the MAC OS X Install DVD. Carefully clean the disc and try installing again." So this disc went from the box to my computer... should not need to be cleaned, right? But I've tried cleaning and installing again - multiple times and I keep getting the same message. Please, please help. Thanks

9810 not working with bose QC 20 headphones - need urgent support!!!

hi
My blackberry 8910 is not working with my new bose QC 20 - noise cancellation headphone, please assist me on this.
Prasanth

That may actually work, yes. Even an extension cable might get you past this.

MacBook Air (2012 release) not working with projectors

I recently bought four MacBook Airs (all the new 2012 release) and I can not get any of them to work with an LCD projector. I have tried generic and authetic mini display adapters and have tried a few different projectors. All I am able to see when I connect them in a black screen with lines running down.
Interestingly enough, if I connect the MBA to an LCD monitor, it works just fine. Then, once I have connected it to an LCD monitor, I can then connect it to a projector. Also, if I shut down the MBA, plug in the dongle, and restart the computer, I can use the projector immediately.
Additionally, I can not get the projector to work at all when using BootCamp with Windows 7 Professional. It doesn't even see the projector at all not matter what I do.
Does anyone have any suggestions? This is extremely frustrating and Apple is being NO HELP whatsoever.

Guys, I've found a workaround that works for both VGA and HDMI issues, to enable you to use the MBA at clients/concerts/universities/other offices etc. It's not elegant, but it works:
- Turn off MBA completely
- Plug into an HDMI or VGA (perhaps ANY) screen
- Boot up and it'll be perfect; as others have already reported. Thus far these steps are OK for anyone who doesn't need to pre-load content. But for those of us that do...
- Now, here's the trick, u can suspend/sleep the MBA now, THEN unplug the screen, move to your new venue, THEN plug in the ANOTHER screen/projector, and turn back on again and it'll work! Yes, even tho it's a different screen, it'll flash a bit and work things out exactly like we're used to with our older macs.
- ie this enables you to set up an external display at work/home, pre-load all your presentation/content/web pages, close the MBA and go to client/lecture hall, then plug into a projector there without having lost your content.
So, in short, provided the MBA is fooled into thinking it was powered up with a screen connected, it'll work thereafter. PROVIDED it is not given the chance to think otherwise ie don;t unplug screen whilst it is awake.
This SO speaks to a perfectly solvable firmware/driver issue. Probably around power management.

Lenovo not working with samsung Lcd TV.need advice...

Similar Messages

Maybe you are looking for