Lenovo Power Tips & Nokia E52

I try to use Lenovo 90W Ultraslim AC/DC Combo Adapter and Nokia E52?!
Any idea how to charge my mobile phone?, because when I put on L9 power tips with mini USB cable they don't work (not charge)!
On www.lenovopowertips.com, they don't have any information about Nokia E52!
This mobile only charge with mini USB...
Solved!
Go to Solution.

Yes, this is ok tip for Nokia E52...

Similar Messages

Lenovo Slim Power Adaptor and Targus/iGo Power Tips

I noticed that the Targus and iGo power tips are the same. From pictures, I can not say the same is true with the Lenovo power tips. Would Targus/iGo power tips work on the Lenovo Slim Power Adaptor? There's a power tip that I need for my Jabra BT135 (micro-USB I think) which isn't supported by Lenovo. Also, the Targus/iGo tip for my Motorola Q (mini-USB) can be found for less than the Lenovo.

What you'll probably find is that the malfunctioning battery is causing your issue. I would simply contact AppleCare, else a reseller, and arrange for a replacement ASAP.
One thing you can do in the meantime is to find a reseller that will allow to use one of their batteries (if you can't otherwise get it booted) to start your MBP and then put it to sleep. Once booted it should be ok to run off the power adapter alone.

Questions about the Lenovo Slim Power Tip Notebook Adapter (part: 0B47048)

Does anyone know what the female port on this power tip looks like? Is it a usb port, or something proprietary? I need to make a cable that will connect my laptop to a legacy charger, and for some reason lenovo doesn't sell that in the US.
Using this adapter for the slim male power tip is my cheapest option to start with.
Thanks!

http://www.flickr.com/photos/lead_org/9132520765/
Here you go.
What do you mean by Legacy charger? you mean the round barrel charger head?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Nokia e52: calendar shows first item only

All,
I've noticed a couple of days ago that my Nokia E52 only shows the first item in the calendar (when in "agenda view"). I can see other appointments on the home screen & I can also see the appointments when in "day view". It's not possible to edit any appointments via the calendar (the calendar seems to crash.
My calendar is synchronized through MfE.
Thanks for any tips
Wim

Could you provide the snapshot.
if your using ICS or JB
press Menu + power button (or) <br>
Volume down key + power button

Losing internet connection on Wi-Fi (Nokia E52)

Hi Everyone!
I have:
1) PC (Windows 7) with ASDL internet (D-Link DSL-200) and USB Wi-Fi Adapter (TP-Link TL-WN821N)
2) Two netbooks (Windows XP)
3) Smartphone Nokia E52
I want to: share the Internet from PC to other devices via Wi-Fi adapter.
The problem: on PC Wi-Fi connection disconnects with smartphone. But on smartphone, connection is active, the smartphone sends the packets, but the PC is not responding
Updates, drivers, firmware:
Windows 7 - all the latest updates.
Windows XP - all the latest updates.
D-Link DSL-200 - installed the latest driver.
TP-Link TL-WN821N - installed the latest driver.
Nokia E52 - installed the latest firmware (091.003 \ 03-Apr-2012)
I was standing on a PC Windows XP. First I tried the program Connectify Pro. Speed is low, not always connected. I created connection manually by Ad-Hoc mode (I manually prescribed IP and DNS addresses). On netbooks, connection is good! But the problem is with the smartphone. Sometimes the connection is lost, on PC Wi-Fi connection disconnects with smartphone. But on smartphone, connection is active, the smartphone sends the packets, but the PC is not responding. I thought, that USB Wi-Fi adapter's power saving is active, but it was disabled. My friend recommended installing Windows 7. I’ve install it. The same thing ... (on PC Wi-Fi connection disconnects with smartphone. But on smartphone, connection is active, the smartphone sends the packets, but the PC is not responding). Situation is the same in Ad Hoc mode and in SoftAP using MS Virtual Wi-Fi or Connectify Pro.
Is there any solution?
By the way! I forgot to say, if any of netbook will be connected to the PC via Wi-Fi, the smartphone does not lose internet connection, but turning off the netbook creates the same problem after minutes (on PC Wi-Fi connection disconnects with smartphone. But on smartphone, connection is active, the smartphone sends the packets, but the PC is not responding).
Wi-Fi connection on netbooks is good, internet works, no disconnects.
I read on the Russian forums, that such a disease is on all Nokia S60 smartphones.
P.S. Sorry for my bad English.

Hi AssIsBack,
Thanks for your feedback and welcome to the forum.
From your description I make it you are creating the ad-hoc connection using the TP-Link TL-WN821N? As a general rule it is not advisable to use ad-hoc for 'permanent' WLAN connections. This is more intended for quick 'point to point' connections and is generally considered to be both unstable and insecure. Also it could be you are using the same USB hub on your PC to connect both the modem and the WLAN interface which may cause these two devices to interfere with each other.
I would strongly suggest you replace the D-Link DSL-200 with a modem which has a WLAN accesspoint built in. You will find this will increase your networks dependability and speed. It will also allow you to have your PC turned off and still be able to use WLAN with your phone.
Kosh
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

Nokia E52 Software update says "Conncetion to Mobi...

Hi,
I have bought new Nokia E52.
The latest manufacture but the software version is old.
The software version in my phone is 34.001 and the latest available is 52.001.
I tried to update the phone software using the Nokia Software updater and OVI suite.
But while updating it is showing error as
"USB Connection to Mobile is lost.. Follow the steps... Disconnect from USB and Trun On off. Conncet to USB again".....
Actually i have not even touch the phone... I am not sure why this error is coming..
Even you disconnect the phone, the phone is blank.. so i need to remove battery to start it again...
I have tried this procedure again and again but not working...
Please help..
thanks in advance
Attachments:
Copy of Error.JPG ‏40 KB

You can do a hard reset of the device, but note that *ALL DATA* on the device will be ERASED. To do a hard reset ( where the phone is almost rewritten ), press *#7370#. If it still doesn't seem to solve, turn off the phone and press *, 3, dial ( green ) and power key altogether till the phone turns on. Always backup before you perform these functions.
Mobile Royale - Latest News, Reviews and Software for Mobiles
Aero Everyday - Aviation News and Insights
GoMobile Forums-The best mobile technology discussions
Please visit http://alifeofmisery.blogspot.com or www.miserylife.tk and help someone smile.
Dreaming of a 5320XpressMusic - 128MB RAM makes up for the 2MP cam !

Nokia E52 choppy VoIP due to WLAN interruptions an...

I love my Nokia E52, but one of the main reasons I bought it (the combination of WiFi Wireless Lan support and fully integrated Voice over IP client) is not usable due to very laggy, unsteady WLAN connection (while having perfect signal strength - E52 shows 100% (same room)).
Because of this I get choppy VoIP (cracks and interruptions up to several words in my VoIP conversations).
My E52:
Software version: 031.012
Modell: E52-1
Type: RM-469
This is not a problem of the VoIP Client, audio-codec, or SIP provider/internet connection.
It is the Wireless Lan connection between my E52 and my Router. I tried 3 different access points, with and without wireless encryption, 802.11b (1M...11M data-rate) and 802.11g - problem always the same.
I can track it down by pinging my E52 (idle without any programs running) from my Linux box:
192.168.0.100 is the IP of my E52 assigned by DHCP.
1.) 64byte pings, once per second:
PING 192.168.0.100 (192.168.0.100) 56(84) bytes of data.
64 bytes from 192.168.0.100: icmp_seq=1 ttl=69 time=6.36 ms
64 bytes from 192.168.0.100: icmp_seq=2 ttl=69 time=57.9 ms
64 bytes from 192.168.0.100: icmp_seq=3 ttl=69 time=80.9 ms
64 bytes from 192.168.0.100: icmp_seq=4 ttl=69 time=203 ms
64 bytes from 192.168.0.100: icmp_seq=5 ttl=69 time=128 ms
64 bytes from 192.168.0.100: icmp_seq=6 ttl=69 time=50.0 ms
64 bytes from 192.168.0.100: icmp_seq=8 ttl=69 time=324 ms
64 bytes from 192.168.0.100: icmp_seq=9 ttl=69 time=79.7 ms
64 bytes from 192.168.0.100: icmp_seq=10 ttl=69 time=37.5 ms
64 bytes from 192.168.0.100: icmp_seq=11 ttl=69 time=60.0 ms
64byte pings using a good wireless 802.11g connection should be around 1ms and constant!!
It's not because of bandwith limit of E52 wlan/cpu, because the higher ping times stay the same, even if I increase ping-packet-size 150x:
2.)10000byte pings (150x times bigger packages!), once per second [still ping times look quite similar]:
PING 192.168.0.100 (192.168.0.100) 10000(10028) bytes of data.
10008 bytes from 192.168.0.100: icmp_seq=1 ttl=69 time=175 ms
10008 bytes from 192.168.0.100: icmp_seq=2 ttl=69 time=89.8 ms
10008 bytes from 192.168.0.100: icmp_seq=3 ttl=69 time=115 ms
10008 bytes from 192.168.0.100: icmp_seq=4 ttl=69 time=234 ms
10008 bytes from 192.168.0.100: icmp_seq=5 ttl=69 time=153 ms
10008 bytes from 192.168.0.100: icmp_seq=6 ttl=69 time=83.7 ms
3.) Small 64byte pings, but now ten pings per second:
Now it gets even more strange:
# ping 192.168.0.100 -i 0.1
PING 192.168.0.100 (192.168.0.100) 56(84) bytes of data.
64 bytes from 192.168.0.100: icmp_seq=1 ttl=69 time=200 ms
64 bytes from 192.168.0.100: icmp_seq=2 ttl=69 time=95.0 ms
64 bytes from 192.168.0.100: icmp_seq=3 ttl=69 time=2.25 ms
64 bytes from 192.168.0.100: icmp_seq=4 ttl=69 time=5.93 ms
64 bytes from 192.168.0.100: icmp_seq=5 ttl=69 time=4.34 ms
64 bytes from 192.168.0.100: icmp_seq=6 ttl=69 time=8.45 ms
64 bytes from 192.168.0.100: icmp_seq=7 ttl=69 time=5.91 ms
64 bytes from 192.168.0.100: icmp_seq=8 ttl=69 time=2.69 ms
64 bytes from 192.168.0.100: icmp_seq=9 ttl=69 time=2.31 ms
64 bytes from 192.168.0.100: icmp_seq=10 ttl=69 time=5.90 ms
64 bytes from 192.168.0.100: icmp_seq=72 ttl=69 time=8.42 ms
64 bytes from 192.168.0.100: icmp_seq=73 ttl=69 time=7.25 ms
64 bytes from 192.168.0.100: icmp_seq=74 ttl=69 time=7.28 ms
64 bytes from 192.168.0.100: icmp_seq=75 ttl=69 time=7.25 ms
64 bytes from 192.168.0.100: icmp_seq=76 ttl=69 time=7.24 ms
64 bytes from 192.168.0.100: icmp_seq=77 ttl=69 time=7.92 ms
64 bytes from 192.168.0.100: icmp_seq=78 ttl=69 time=7.24 ms
64 bytes from 192.168.0.100: icmp_seq=79 ttl=69 time=8.69 ms
64 bytes from 192.168.0.100: icmp_seq=80 ttl=69 time=10.9 ms
64 bytes from 192.168.0.100: icmp_seq=81 ttl=69 time=10.6 ms
64 bytes from 192.168.0.100: icmp_seq=150 ttl=69 time=213 ms
64 bytes from 192.168.0.100: icmp_seq=151 ttl=69 time=105 ms
64 bytes from 192.168.0.100: icmp_seq=152 ttl=69 time=3.09 ms
64 bytes from 192.168.0.100: icmp_seq=153 ttl=69 time=2.23 ms
64 bytes from 192.168.0.100: icmp_seq=154 ttl=69 time=2.14 ms
64 bytes from 192.168.0.100: icmp_seq=155 ttl=69 time=3.78 ms
64 bytes from 192.168.0.100: icmp_seq=156 ttl=69 time=3.02 ms
64 bytes from 192.168.0.100: icmp_seq=157 ttl=69 time=5.48 ms
64 bytes from 192.168.0.100: icmp_seq=158 ttl=69 time=2.15 ms
64 bytes from 192.168.0.100: icmp_seq=159 ttl=69 time=2.13 ms
^C
--- 192.168.0.100 ping statistics ---
159 packets transmitted, 30 received, 81% packet loss, time 16866ms
rtt min/avg/max/mdev = 2.130/25.327/213.218/54.102 ms, pipe 2
Note: My Linux Ping Command doesn't say something like "Request timed out." for lost packets (like Windows Ping does). So if there is a jump from icmp_seq=81 to icmp_seq=150 it is because everything in between got lost.
You see, in 3.) it has the slow pings once in a while and in between almost normally fast pings, but suddenly a long lag of 6-7sec (this is deadly for voip) and then the circle repeats.
Is my E52 wlan chip defect, or is this some kind of Power-Management system? How can I turn it off?
I don't need a fast wlan connection on my E52. 1MBit/s is more than enough. But it has to be steady, without lags.
Ideas, anybody? Please!

Well, it has nothing to do with the VoIP service itself for sure. As razvan_t has already noted earlier this problem affect all network services like internet radio.
It behaves exactly as E52affair described in the very first post. If I ping the phone through my home LAN using ping with normal settings, i.e. 1 packet per second nothing much wrong happens. It finishes with some 1% packet loss. But when I increase the ping frequency up to 10 packets/s the same test ends with terrible >80% packet loss as you can see below. And the following pattern can be observed during this test: 10 packets goes through well then some 60-70 packets is lost and it repeats again and again. Lags in VoIP audio stream correspond to the lags in ping. The wifi conditions are excellent, phone is located some 2 meters far from the router´s wifi antenna.
I tried watch some video on Youtube. The video stream was prefetched in jumps appearing with the same frequency as lags in fast ping were observed during the test.
Before I found this thread I obviously thought it was a VoIP problem. Therefore I tried various VoIP settings, different codecs, nothing has helped. Now it is clear why.
I even did a phone hard reset. It did not help neither.
Because I observe almost the same lags in VoIP even when the phone is connected using the packet data through the GSM network, I suppose the problem is not limited to wifi connection only. But I cannot confirm this theory because I´m not able to ping the phone throughout the GSM data network.
jirka@pc-jirka:~$ sudo ping 192.168.100.14 -i 0.1
PING 192.168.100.14 (192.168.100.14) 56(84) bytes of data.
64 bytes from 192.168.100.14: icmp_req=1 ttl=69 time=64.6 ms
64 bytes from 192.168.100.14: icmp_req=2 ttl=69 time=7.58 ms
64 bytes from 192.168.100.14: icmp_req=3 ttl=69 time=7.61 ms
64 bytes from 192.168.100.14: icmp_req=4 ttl=69 time=7.62 ms
64 bytes from 192.168.100.14: icmp_req=5 ttl=69 time=4.36 ms
64 bytes from 192.168.100.14: icmp_req=6 ttl=69 time=7.64 ms
64 bytes from 192.168.100.14: icmp_req=7 ttl=69 time=7.93 ms
64 bytes from 192.168.100.14: icmp_req=8 ttl=69 time=7.57 ms
64 bytes from 192.168.100.14: icmp_req=9 ttl=69 time=7.58 ms
64 bytes from 192.168.100.14: icmp_req=10 ttl=69 time=7.60 ms
64 bytes from 192.168.100.14: icmp_req=69 ttl=69 time=568 ms
64 bytes from 192.168.100.14: icmp_req=70 ttl=69 time=461 ms
64 bytes from 192.168.100.14: icmp_req=71 ttl=69 time=354 ms
64 bytes from 192.168.100.14: icmp_req=72 ttl=69 time=248 ms
64 bytes from 192.168.100.14: icmp_req=73 ttl=69 time=140 ms
64 bytes from 192.168.100.14: icmp_req=74 ttl=69 time=33.0 ms
64 bytes from 192.168.100.14: icmp_req=75 ttl=69 time=7.58 ms
64 bytes from 192.168.100.14: icmp_req=76 ttl=69 time=4.48 ms
64 bytes from 192.168.100.14: icmp_req=77 ttl=69 time=7.68 ms
64 bytes from 192.168.100.14: icmp_req=78 ttl=69 time=7.65 ms
64 bytes from 192.168.100.14: icmp_req=147 ttl=69 time=57.9 ms
64 bytes from 192.168.100.14: icmp_req=148 ttl=69 time=5.26 ms
64 bytes from 192.168.100.14: icmp_req=149 ttl=69 time=7.68 ms
64 bytes from 192.168.100.14: icmp_req=150 ttl=69 time=7.60 ms
64 bytes from 192.168.100.14: icmp_req=151 ttl=69 time=7.67 ms
64 bytes from 192.168.100.14: icmp_req=152 ttl=69 time=8.07 ms
64 bytes from 192.168.100.14: icmp_req=153 ttl=69 time=7.67 ms
64 bytes from 192.168.100.14: icmp_req=154 ttl=69 time=4.24 ms
64 bytes from 192.168.100.14: icmp_req=155 ttl=69 time=7.62 ms
64 bytes from 192.168.100.14: icmp_req=156 ttl=69 time=7.53 ms
64 bytes from 192.168.100.14: icmp_req=225 ttl=69 time=99.5 ms
64 bytes from 192.168.100.14: icmp_req=226 ttl=69 time=3.79 ms
64 bytes from 192.168.100.14: icmp_req=227 ttl=69 time=20.3 ms
64 bytes from 192.168.100.14: icmp_req=228 ttl=69 time=3.91 ms
64 bytes from 192.168.100.14: icmp_req=229 ttl=69 time=4.57 ms
64 bytes from 192.168.100.14: icmp_req=230 ttl=69 time=4.70 ms
64 bytes from 192.168.100.14: icmp_req=231 ttl=69 time=7.95 ms
64 bytes from 192.168.100.14: icmp_req=232 ttl=69 time=5.35 ms
64 bytes from 192.168.100.14: icmp_req=233 ttl=69 time=5.65 ms
64 bytes from 192.168.100.14: icmp_req=234 ttl=69 time=5.63 ms
^C
--- 192.168.100.14 ping statistics ---
294 packets transmitted, 40 received, 86% packet loss, time 31394ms
rtt min/avg/max/mdev = 3.795/56.194/568.719/126.270 ms, pipe 6

Nokia E52 Exchange Calendar sync problem (Critical...

Good day,
I am using NOKIA E52 and e-mail for exchange on it and Calendar sync don't work fully.
As I read other post that others has the same problem.
We are using Exchange Server 2010!
It is supercritical and stopped fully my job!!!
Please give a solution!!!!!
Best Regards,
Girts

Hi all,
The boards here are for user-to-user support only.
If you want to provide any feedback directly to Nokia, you should use the 'Contact us' link at the top of the page to contact your local Nokia team.
Regards,
Nixy_Fedorov
Moderator

Lenovo Power Manager in Windows 8

Hi guys,
Since Lenovo Power Manager is not available for Windows 8 (no matter my laptop is specified to be FOR Windows 8... grrrrr...) I've been playing around because I needed not the infamous power gauge taking space in my taskbar, but some advanced settings.
Well, I found a couple of things:
Power Manager (g6u432ww.exe) can be installed in Windows 8 and can be used. Even the power gauge.
To install it, you have to run the setup in Windows 7 compatibility mode.
It doesn't work very well: sometimes it crashes or the UI won't open (at doesn't open anymore, no matter what you do). But it does run the first time (use it before restarting) and you can change battery settings and some other stuff anyway.
Do create a Restore Point before, because is not created automatically and because you won't be able to uninstall it later, since the setup expects Windows 7.
If you install Lenovo Settings Dependency Package (gfsd02ww.exe) after that, Power Manager gets upgraded from version 6.36 to 7.11. But still crashes.
Settings regarding battery charging are kept, no matter you restore Windows using system restore. So you can create a Restore Point, install Power Manager, change battery settings, and then restore Windows.
Is not a solution (I'm still expecting for Lenovo to fix this support for Windows 8). But at least I was able to stop the battery from charging all the time.
This has been tested on a ThinkPad Edge S430.
One important question left is:
Why Lenovo Power Manager 7.11 can't be downloaded and installed normally? I couldn't care less for the Metro Store Apps and bulky gadgets. But I want to be able to change some settings.
Cheers.
If I helped you, please give me some kudos! ^^

There's a stickied thread at the top of this board which explains / discusses ThinkPad software for Windows 8, hopefully the information you are looking for is there.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

No email body in mail for exchange? Nokia E52

On my Nokia E52 i have setup mail for exchange access to gmail, but all it seems to download is the header with who its from and the subject? There isnt any mention of the email body/message at all?
My contacts and calendar all sync properly.
Am i missing something? On my ipod touch it downloads the messages using the exact same account

Curious issue, on the 22nd January 2010, I also got a system message stating ‘Mail for Exchange – Your account does not have permission to synchronise with your current settings.' then a further message saying that the phone required a locking password etc. This resulted in the phone being locked before it could be opened.
I'm sure nothing changed on the local mail servers, so I wonder what has changed on the Mail For Excange settings?

Hi i have problem with nokia E52 SL3 I can t unl...

if some can help me i have problem with NOKIA E52 SL3 SOFTWER ITS LOCK I BUY IN POLAND FROM ORANGE

@aleksandars
Welcome to the forum!
This remains an issue between you and your network provider Orange, a procedure in which Nokia has no involvement unfortunately.
Happy to have helped forum with a Support Ratio = 42.5

Nokia E52 Message Sender Name Field is not updated...

Nokia E52 Message Sender Name/Field is not updated automatically on Firmware 054.003!
Issue 1: Message Sender Name/Field is not updated automatically after changes made in contacts.
e.g. Message send by Mr. A is displayed in inbox, however when same contact changed to Mrs. AB in contacts does not update sender name/field inside inbox. Sender name remains Mr. A physically on handset. However the changes made to contacts and Message Sender Name/Field is updated automatically on use of Nokia PC Suite 7.1.60.0 and Nokia Ovi Suite 3.0.0.290 but not on phone.

Thanks for sharing the answer here, it is really helpful for others with the similar issue.
Qiao Wei
TechNet Community Support

Nokia E52 - Default number not working on Firmware...

Hi,
Just bought Nokia E52. When I select default number among some number for a contact, it still asks me to choose number while calling or sending a message. Sometime it asks, and sometime it does not.
When will we get a fix for this ?
Regards,
Tamour

This is a classic problem on these new FP2 phones. I had the same problem with my N96.
You'll need to have a memory card inserted for this and you'll have to re-populate your contact groups afterwards, but the solution is to go into your contacts and then:
Options > Mark/Unmark > Mark all
Options > Copy business card > To other memory > memory card
This exports a bunch of VCF files to the memory card.
Next, delete all the contacts from your address book
Options > Mark/Unmark > Mark all
Press 'C' and confirm.
Now re-import the contacts from the memory card:
Options > Copy business card > From other memory > memory card
This will re-import all your contacts and it will now be possible to assign defaults.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Nokia E52 - downloading maps direct to the phone

Hello, i would ask if here is chance to download maps directly to the phone without using a PC. (through WiFi).
I have Ovi Maps appliaction v 3.04 , phone Nokia E52.
Thanks for answers.

@sladdy
Welcome to the forum!
There is nothing to stop you downloading directly the compressed .zip file for smaller region(s) from map servers directly upon your E52, decompressing it and moving the (16) folders 0 - 9 and a - f to their respective positions in E:\Cities\diskcache following the methods outlined by ovikovi here on the forum!
There is unfortunately no "Update" feature within Ovi Maps v3.04 as opposed to v3.06 for this purpose!
Happy to have helped forum with a Support Ratio = 42.5

Nokia E52 - where is my contacts?

Hi guys. I have my Nokia E52 for well over a year now and can't say it has given me any problems of note. However, recently, I started using an instant messaging service named WhatsApp. It was working fine in the begininng, but one day while using it, it made the phone switch off, and would never swich back on. I sent it in for repairs and it came back working fully functional.
That lasted all but 1 week, before I noticed that suddenly, all my contacts have disappeared from my phone memory. I can not find a single one. The weird thing is, if somebody calls me who was previously in the contact list from the phone memory, their name appears. So, somehow, it seems to me that the contacts are there, but I just can't access it. I phoned nokia helpdesk, and they asked me to backup --->format--->restore, and that didnt help my cause either. Even if I try to store new contacts to the phone memory.... it foes it successfully, but I just cant pick them up. Can somebldy please advise me on this matter?
Thank you

I did the following...
a)Made a backup to my pc using Nokia PC Suite
b)formatted the phone(dialed *#7370#)
c)tried to restore the file, but couldnt, because the phone was probably in a "lost" state and nokia pc suite could not pick the phone up.
d) Did a hard reset.
e) phone was visible again
f) restored the file, but was back at square 1.
I am not sure if what you suggesting is the same as what I did above and if ovi suite is anything different from nokia pc suite or if it is the same thing. . Needless to say though, thanks a million for your input thus far. Really appreciate it.

Lenovo Power Tips & Nokia E52

Similar Messages

Maybe you are looking for