[Lenovo px4-300r] Not loading Admin Webpage

Hi everyone,
Until today i was using my Lenovo px4-300r without any problem. Static IP added, shared folders running OK and everything perfectly running.
Today we finally add an owned SSL certifcate on Security Section, to avoid the annoying SSL problem. My surprise is that when we restarted the NAS we cann't reach to the admin web.
I can access perfectly to the shared folders but cann't access to the admin web. Anyone knows who is it possible? Any solution?

Please, please, PLEASE tell me that the cert you supplied is NOT a wildcard certificate. The automation that rebuilds the Apache config at every boot will build an incorrect config that will prevent Apache from loading when a wildcard certificate is used.
Prior to upgrading to 4.x, I'd been using a wildcard, which worked fine. I upgraded and had the same symptoms. Luckily, I'd also permanently enabled support mode, so I could SSH into the system to see if I could fix it. AFTER ZERO USEFUL SUPPORT FROM THIS FORUM, I was able to figure out what was going on and ultimately fix it by deleting the wilcard cert from the system.
You probably don't have SSH access to do anything with it, so you're probably looking at a factory reset/reflash to get back up.

Similar Messages

  • My computer says it is connected to internet but it does not load the webpage

    my computer says it is connected to the internet, full bars but it does not load the webpage when i click on safari

    If you are connected wirelessly it is possible to have full bars, but your wireless router connection to the Internet could be the problem.  Try restart your router. 

  • My macbook pro loads webpages fine for the first few minutes but after that the internet freezes and will not load anymore webpages. What can I do to fix this?

    My macbook pro loads webpages fine for the first few minutes but after that the internet freezes and will not load anymore webpages. What can I do to fix this?

    I let Firefox sit on my desktop for about five minutes, and it finall allowed me to use it. That is EXTREEEMELY slow. What is the problem?

  • Safari not loading any webpages after 10.7.3 update.

    I did the update through software update, and I saw a lot of people having errors with that, but i did not get the cui error, my only issue is safari stopped loading any webpages.
    If I try to enter an address in the bar and hit enter, it just beachballs, and than nothing happens, before it used to just keep trying to load it.
    I than downloaded the combo updater, opened the dmg, and installed over it, restarted and same issue
    Prior to the combo update I repaired any file permissions as well.
    How do I get safari to work properly again?
    I even uninstalled the clicktoflash extension.
    TIA.

    From your Safari menu bar click Safari > Empty Cache
    If that doesn't help, back to the menu bar click Safari > Reset Safari. Select the top 5 boxes click Reset.
    If that didn't help, go to ~/Library/Preferences. Move the com.apple.Safari.plist file form the Preferences folder to the Desktop. Quit then relaunch Safari to test. If pages load, move that .plist file to the Trash. Otherwise, just move it back to the Preferences folder.
    See if that helps. If not, go to Safari > Preferences then select the Security tab. Deslect:  Enable plug ins
    Quit then relaunch Safari to test. If Safari loads pages, then you need to troublleshoot Safari add ons >  Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues'
    If you have anti virus software installed, disable that. And turn off the Firewall in System Preferences > Security & Privacy. See if that helps.

  • Firefox not loading up webpage

    Hey guys,
    I've been experiencing this problem with Firefox where most pages would not load after i clicked on it. This happens 100% of the time when i first open up the program, it would let me browse a few web pages before it stops loading everything else. It would try to load a webpage indifinitely. I can only remedy this by restarting the program, but then it only works for a few more webpage browsing before it stops working again.
    Do you guys think it could be an extension issue? If so which one?

    If this is one Mac on a Network with your own Router, reconfigure the Router to have your ISP's DNS "magic numbers", then disconnect and reconnect your Mac. Your Mac should pick up the numbers from your Router.
    If this is one Mac without a Router, use:
    System Preferences > Network > (Internet interface) > Advanced ...
    to enter your ISP's "magic numbers" for DNS.
    If you prefer, you can use OpenDNS servers instead:
    208.67.222.222
    208.67.220.220
    Make certain you do not have any bogus, old, dead numbers ahead of the ones you want to be using -- they will be used first in the order they appear.

  • Safari NOT LOADING ANY WEBPAGES...PLEASE HELP!!

    Hey Everyone,
    I’ve been having a huge problem with my safari browser ever since I got it installed onto my windows XP OS. On starting up the application, safari JUST WON’T LOAD ANY WEBPAGES. I’ve only managed to get it to load pages a few times after much struggle and this usually succeeds immediately after restarting the computer. And the other weird thing is, once fired up, it won’t fail to load any web pages until you close the browser. The other fault is that the browser keeps crushing once you mingle around with its buttons in attempt to get it to load the webpages.
    I have tried to google whether people have had similar problems with the browser but none fits into my problem. I would love for anyone to offer me any guidance on what to do next after all the below attempts to fix the problem failed;-
    -Re-installing Safari several times.
    -The same problem occurs on my Windows Vista Notebook.
    -can’t seem to find a facility to change the port number.
    PLEASE HELP!

    In Vista, Safari personal prefs and such are stored in the hidden user folder "AppData" in subfolders Local and Roaming, under "Apple" folders.
    Clean out (move or something) and let Safari start fresh, which should solve the issue.
    Not sure where XP stores files.

  • PX4-300R not start

    Hello we have a PX4-300r that is not booting, the screen keeps showing the Iomega logo and the 4 blue leds keep turning on. Does anyone know if it´s possible to take off the HD´s and put them in another storage for example in a px4-300D or does it have to be in the same model they where in before.
    All our servers are in that appliance using xenserver
    Thanks in advance

    Hi rreyes,
    You can put the disks in another device, but putting the disks in another storage unit will result in the device asking to erase the previous data from the disks. Have you contacted technical support to create an incident with them?
    Have questions and need answers?
    Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
    LenovoEMC Support & Downloads
    LenovoEMC North America Support Contact Page

  • Firefox 3.6.15 will not load any webpages--BLANK PAGE only!

    I just upgraded my Firefox to 3.6.15 yesterday, and upon restarting the browser, it does not load the homepage...or any other page for that matter. It loads a blank white screen even though the address bar has the proper web address. It will do this no matter what webpage you load.
    I have updated my Java applet and Flash to the most current versions and this did not seem to help either.

    I had already tried a reinstall before, but thanks for the suggestion. Starting FF in Safe mode did not help either.
    XULRunner is specific to FF. Mostly found discussion about using the code in web pages when I used Google before posting.
    When FF went from version 3.6.14 to version 3.6.15 this issue started. Please note the Error message and the version info I just mentioned.
    '''"Platform version '1.9.2.15' is not compatible with minVersion > =1.9.2.14 maxVersion < = 1.9.2.14"'''
    '''The Platform was revved up from 1.9.2.14 to1.9.2.15'''
    I could not find information on: minVersion or maxVersion much less how to change them in XULRunner.
    '''''It is definitely a Mozilla FF issue'''''.
    Avast sandbox is up to date and works just fine with everything else. More importantly it worked just before the update was installed.
    The only reason I bothered with the update is because Mozilla touted it as a security issue and there was NO mention of any known issues with sandbox software.

  • Will not load the webpage.

    It will not load the web page. It doesn't give an error message or say it timed out. The circle on the tab will spin for a little while then just stop, and nothing comes up. I'm uninstalled it, then re-installed it and still giving me this problem. I've checked for updates and I'm running the latest version.

    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

  • Safari will not load any webpage. Have reinstalled several times.

    I have not been able to use Safari on my PC for some time. I have reinstalled several times, and completely removed safari and installed new several times. It will not load any page.

    Many thanks.
    Even though it's about a different application, I'd try the following document with that:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    (Safari uses the same webkit engine to render web pages as iTunes uses to render the Store pages. So an issue that can cause the iTunes Store to blank can also cause a Safari for Windows application on the same PC to produce blank pages.)

  • Many times Firefox do not load any webpage and after refresh/reload it open, Why?

    Many times firefox do not open the web page and TRY AGAIN message comes but when refresh or reload button pressed, immediately page loads. This happen regularly.
    == This happened ==
    Every time Firefox opened
    == last month

    I'm having the problem.

  • Firefox will not load any webpage, but Chrome works just fine. What is wrong?

    Whenever I open Firefox I get the message 'Problem loading page' on every website I try. This just started today. I am having the same issue with IE, but Chrome is working fine. It is not a problem with my internet, as Chrome and my PS3 have no problem connecting to the internet.

    Thanks, turns out I got a virus somehow. BWContextHandler32.exe is reporting itself to my firewall as the game BulletStorm, which I do not have, and somehow attached itself to Firefox and probably IE as well. I figured it was bogus so I blocked it. Still not sure why it just started blocking Firefox. I was denying access to it for a couple days, darn procrastination, and Firefox was working fine. Now I just have to get rid of it...I really hate windows sometimes...

  • New safari update (5.1.2) for windows does not load any webpage. i can open safari but nothing happens.

    why wont it load?

    Try this:
    Bring up the Windows Task Manager.
    Look for a process called: "WebKit2WebProcess.exe" and there may be a *32 after the name.
    Now Look for a "Safari" process, there may be multiple instances, but the primary instance will be identified by the significantly more memory that it uses.
    Kill both processes.
    The Kill order may be important.
    If the WebKit process is running alone kill that first, and try to relaunch Safari.
    If a Safari process(s) is running, Kill the primary instance, The WebKit process should also go away but if not Kill WebKit too.
    It may take more that one launch attempt to clear the memory.
    Further,, you will likely have to do this at each Safari launch because these processes become unstable after short use - until Apple fixes this bug.
    -Alan
    Ps: I have no issues what so ever on Lion, just Windows 7

  • Firefox does not load any webpages. Only shows "done" in corner. IE (64bit) works fine

    The firefox program loads fine. However it only shows "untitled" in the tab and "done" in the bottom corner. It does not show any error notifications. When I click a bookmark, or enter a URL into the location bar it makes not attempt to contact the server. In fact it appears to do nothing at all.
    I appreciate any help you can provide.

    Create a new profile as a test to check if your current profile is causing the problems.
    See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting&#58; Make a new profile]]
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    Your above posted system details show outdated plugin(s) with known security and stability risks.
    *Shockwave Flash 10.0 r22
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/

  • Since July 24, 2010, firefox will not load any webpage. I uninstalled 3.6.8 and want to re-install 3.6.2. How can I do this?

    My updated firefox version will not work at all. I uninstalled it, and want to go back to my previous version which was always working. I have Microsoft Vista. Please help as soon as possible.
    == This happened ==
    Every time Firefox opened
    == July 24, 2010 ==
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

    This can be caused by a firewall blocking internet access to Firefox. See [[Firewalls]]. That link has a list of popular firewalls and how to configure them to work with Firefox.
    Also see [[Firefox cannot load websites but other programs can]]
    If you <u>must</u> install a previous version, see [[Installing a previous version of Firefox]].

Maybe you are looking for