Lenovo RnR backup does not complete succesfully

Hi, I have version 6 of thinkvantage toolbox and RnR will not backup successfully to hard drive or usb device. Windows 7 performs a backup with no problems. Any suggestions on what could be the problem? Thanks Diane

The most common reason for the merge to fail is lack of free disk space (however this is not the cause for you since you have tons of free space according to the log you posted).
The second most common reason for the merge to fail is some internal corruption of one of more of the backups that are being merged together, and it's almost impossible to know what caused this corruption. It could be that a backup was interrupted, or a virus scanner interfered and quarantined a backup file, or a disk error (these are some of the problems I have seen in the past).
When a merge fails and it's not due to lack of free space, it means that you may not be able to restore your most recent backup should you need to in the future (e.g., something is wrong). You can delete one or all of your backups (including the base backup) and start over. My recommendation for you would be to delete all of the incremental backups (starting with the most recent backup first), leave the base backup, and then immediately take a new backup so that you are protected.
I'm also curious to know where you are taking backups to (e.g. USB, network, etc)? If you want to zip up the contents of your c:\swshare folder and attach it here, I'd be happy to look over the logs to see if something sticks out at me.

Similar Messages

TS3992 Icloud backup does not completed after install IOS 8

I recently installed iOS 8 on my iPhone 5s (32 GB). Prior to the install, I had just enough storage to backup on iCloud. However, after the install, it is saying "[a]n additional 3.1 GB of storage is required. This is puzzling because under Manage Storage it says that I have 4.3 GB worth of backups (3.6 for iPhone and 731 MB for iPad), which is within the 5 GB of free storage. In addition when I try to Backup my Iphone several times show me that the Backup is not completed and the last back up was before install IOS 8(17 Sept)
it is probably something to do with the iOS 8 update. This could be the case, although I downloaded and installed iOS 8 via Iphone wireless update, so nothing (I'm guessing?) should have been downloaded onto the phone.
Any help would be appreciated.

I am having this problem too and I saw on another board that it is because it is keeping the copy from ios7 instead of replacing it w/the new one and that the solution is to delete the old backup. I have not verified that this is the correct answer yet as I do not know how to do that, but at least it may get you one step closer.

My time machine backup does not complete

The error message is
Time Machine couldn't complete the backup to "<our server name>"
The backup disk image "Volumes/Backup/<MyComputerName mini.sparsebundle" is already in use.
Latest successful backup: January 17, 2014
Please help.

On your Server (assuming it's OS X Server), turn off the Time Machine Service then turn it back on. This is what I have done in the past when this happens.

PSE 11 catalog backup does not complete

I am having a problew with my first full backup after importing 27000 photos.My catalog organizer in psa 11 also shows over a 1000 movies from adobe premier elements software which seems to have a common thread between them. The backup stops at 44% the 3 times I have tried. Just a beginner with both software.
Message title was edited by: Brett N

Start with following the steps listed here:
Troubleshoot catalog backup, upgrade

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

HT1222 Please Help.. When I update to 7.0.6 I remark a very low battery lifetime I does not complete 2 hours.. I update to 7.1 to get rid of this problem but unforeately the problem still.. Could you please guide what to do?

Please Help.. When I update to 7.0.6 I remark a very low battery lifetime I does not complete 2 hours.. I update to 7.1 to get rid of this problem but unforeately the problem still.. Could you please guide what to do?

Restore as New (no backup)... then Re-Sync your Content.
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download

Exchange 2010 "event id 403/401 The physical consistency check" Backups does not work...Critical!!

Hi,
At this moment our backups does not work. We have two error on the event viewer;
Exchange 2010 sp3 version 14.03.0158.001
We have only one server Exchange 2010 with two databases for users...
Event id 401;
Instance 1: The physical consistency check has completed, but one or more errors were detected. The consistency check has terminated with error code of -106 (0xffffff96).
Event id 403;
Instance 1: The physical consistency check successfully validated 629126 out of 1110272 pages of database '\\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy33\exchangedb\global\global.edb'. Because some database pages were either not validated or failed validation,
the consistency check has been considered unsuccessful.

Hi Javier,
From your error description, I recommend you do the following steps for troubleshooting:
1. Please run CHKDSK and restart server.
2. Run a Database level Mailbox repair request.
What's more, here are some useful threads for your reference.
Create a Mailbox Repair Request
http://technet.microsoft.com/en-us/library/ff625221(v=exchg.141).aspx
Database Backup Failing with Event ID 2007, 9782, 401, 403, 254
http://social.technet.microsoft.com/Forums/en-US/4c8eccbf-435a-43ef-b3f6-0de5096413ee/database-backup-failing-with-event-id-2007-9782-401-403-254?forum=exchangesvravailabilityandisasterrecoverylegacy
Hope it helps.
If you need further assistance, please feel free to let me know.
Best regards,
Amy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Lenovo 11s- Screen Does Not Wake Up From Sleep

My Lenovo Yoga 11s does not wake up after putting it to sleep. I will press the power button multiple times, but the screen stays black. To turn it on I have to press the power button for 10 seconds so it completely shuts off, then I push the power button to turn it on. However when I do this all my tabs and windows are closed, which is very inconvenient.
Please help me find a solution!!!!!!!!!!!!!!!!!!!!

hi Parabola,
Thanks for Posting
Can you try checking this step
http://www.dummies.com/how-to/content/activate-hybrid-sleep-on-windows-pcs.html
Turn ON the Hybrid sleep and see if that fixes the issue,
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Differential backup failed because old backup does not exist

Hi,
We scheduled the backups of TFS through the TFS Administration console.
* Full each sunday at 18:00
* Differnetial each evening at 22:00
* Transactional each hour
* rentention time 8 days
The differential back-ups of Monday (20-4) and Thuesday (21-4) did go well. But for some reason the differential of Wednesday and Thursday didn't work out.
Start of log file of 21-4:
[21-4-2015 20:00:00] [Info] Requested Backup Job: Differential
[21-4-2015 20:00:00] [Info] -------------------------------------------------------------------
[21-4-2015 20:00:00] [Info] Jobs Requested: Differential. Completed:None. To Run:Differential.
[21-4-2015 20:00:00] [Info] RunDifferentialBackupJob
[21-4-2015 20:00:00] [Info] Scanning configuration for new DBs
[21-4-2015 20:00:00] [Info] BackupSettings changed ? False
[21-4-2015 20:00:00] [Info] Starting differential backups
[21-4-2015 20:00:00] [Info] Database Tfs_Configuration parent is 9859022596859328236
[21-4-2015 20:00:00] [Info] Starting Differential Backup server:RDSQL11\TFS database:Tfs_Configuration filename:\\RDSQL11\Backup$\Tfs_Configuration_9859024468858452975D.bak
[21-4-2015 20:00:00] [Info] BACKUP DATABASE [Tfs_Configuration] TO DISK = N'\\RDSQL11\Backup$\Tfs_Configuration_9859024468858452975D.bak' WITH DIFFERENTIAL, NOFORMAT, NOINIT, NOSKIP, REWIND, NOUNLOAD, STATS = 10
[21-4-2015 20:00:01] [Info] Backup Complete for database Tfs_Configuration
On 22-4 the log looks like this:
[22-4-2015 20:00:00] [Info] Requested Backup Job: Differential
[22-4-2015 20:00:00] [Info] -------------------------------------------------------------------
[22-4-2015 20:00:00] [Info] Jobs Requested: Differential. Completed:None. To Run:Differential.
[22-4-2015 20:00:00] [Info] RunDifferentialBackupJob
[22-4-2015 20:00:00] [Info] Scanning configuration for new DBs
[22-4-2015 20:00:00] [Info] BackupSettings changed ? False
[22-4-2015 20:00:00] [Info] Starting differential backups
[22-4-2015 20:00:00] [Info] Database Tfs_Configuration parent is 9859022596859328236
[22-4-2015 20:00:00] [Info] Starting Differential Backup server:RDSQL11\TFS database:Tfs_Configuration filename:\\RDSQL11\Backup$\Tfs_Configuration_9859025332862172100D.bak
[22-4-2015 20:00:00] [Info] BACKUP DATABASE [Tfs_Configuration] TO DISK = N'\\RDSQL11\Backup$\Tfs_Configuration_9859025332862172100D.bak' WITH DIFFERENTIAL, NOFORMAT, NOINIT, NOSKIP, REWIND, NOUNLOAD, STATS = 10
[22-4-2015 20:00:00] [Error]
Exception Message: Cannot perform a differential backup for database "Tfs_Configuration", because a current database backup does not exist. Perform a full database backup by reissuing BACKUP DATABASE, omitting the WITH DIFFERENTIAL option.
BACKUP DATABASE is terminating abnormally. (type SqlException)
SQL Exception Class: 16
SQL Exception Number: 3035
SQL Exception Procedure:
SQL Exception Line Number: 1
SQL Exception Server: RDSQL11\TFS
SQL Exception State: 1
SQL Error(s):
SQL Error[1]: System.Data.SqlClient.SqlError: BACKUP DATABASE is terminating abnormally.
    Class: 16
    Number: 3013
    Server: RDSQL11\TFS
    Source: .Net SqlClient Data Provider
    State: 1
    Procedure:
    Line Number: 1
Exception Data Dictionary:
HelpLink.ProdName = Microsoft SQL Server
HelpLink.EvtSrc = MSSQLServer
HelpLink.EvtID = 3035
HelpLink.BaseHelpUrl = http://go.microsoft.com/fwlink
HelpLink.LinkId = 20476
So this is the same parent and the the file is still present on disk.
Can someone point in a direction to solve this issue?
Thanks!!

Hi RemkoP,
Based on your description, you can check whether you have a full backup file in your backup folder. Differential backups are backups of the changes that have occured since your last full database backup. If there no full backups, then we cannot perform a
differential backup.
You might do a full backup for the database, then do the differential backup. If you have any other concerns, please elaobrate more details about your scenario and reproduce steps.
Best regards,

So my Ipod touch hasn't been connecting to computer, or charging for a week or two until i turn it off completely and now i try to reset all content and setting, the circle goes round and round for like hrs(24) and it still does not complete the reset

so my Ipod touch hasn't been connecting to computer, nor charging for a week or two until i turn it off completely and now i try to reset all content and setting,(thinking it may connect to the computer and itunes and also charge) but the circle goes round and round for like hrs(24) and it still does not complete the reset.
pls pls pls pls help .
i have tried alot of solutions, but non of them have worked.

Have you tried walking it into the nearest Apple Store and asking for assistance there...?
I'm guessing you don't have Apple Care on it.

After installing the latest itunes/quicktime update, I can no longer access the itunes store and my iphone does not complete syncing. What can I do to fix this?

After installing the latest itunes/quicktime update I can no longer acces the itunes store nad my iphone does not complete syncing. What can I do to fix this? I have tried uninstalling and reinstalling itunes. I have uninstalled and reinstalled windows updates. I have checked the firewall settings. what else?

The problem is with version 10.4.1. I had to reload 10.3 to get it to work. The recommendation from a previous poster worked for me. Here was their list of steps:
Go to Control Panel>Programs>Uninstall
2. Uninstall the following Apple programs in the following order:
     a. iTunes
     b. QuickTime
     c. Apple Software Update
     d. Apple Mobile Devices Support
     e. Bonjour
     f. Apple Appllcation Support
3. Reboot PC
4. Find, Download and Install iTunes 10.3 (you can find it at FileHippo.com)
If you start iTunes now you will get an error message saying that the current iTunes library was created by a newer version of iTunes. To correct this:
5. Go to your Music>iTunes folder and delete the "iTunes Library.itl" database file
6. Within this iTunes folder find and open the "Previous iTunes Libraries" folder and locate the most recently dated "iTunes Library (date).itl" database file.
7. Copy and Paste this file back into the iTunes folder
8. Rename this "iTunes Library (date).itl" file by removing the date. It should say "iTunes Library.itl"
9. Reboot PC

Visual Approval Action does not complete

Hello,
I am using Visual Approval Callable Object in my Application but when the approver goes into the workitem to approve it ...the action does not complete and he gets the following message...on clicking on Approve/Reject button:
"Cannot complete action: The activity could not be read"
When I test the CO in designtime ...it works fine....and i have used visual approval CO at other places also....it works fine there...only at this one it gives an issue...i tried recreating it ....and also tried to put in a different block...but still comes with the same error....
Any help would be highly appreciated...
Regards,
Anil

George,
Thanks for the reply....I have checked the parameter mapping and the email address is also setup which is passed as a Context parameter for the Action processor ...but still gives the same error....
Please help.

When i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP

when i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP.
Also when i take the disk out it seems fine nd everything seems to be burned onto the disk. I am buring mac os x lion onto a disk.
The disk i am using is nextech and i am burning at the slowest speed (4x).
Also this is my 3rd time trying to do this and the verifying process keeps failing.... what do i do?

see there
http://www.techmixer.com/best-free-mac-burning-software-for-mac-osx/
what you like most
try different brand of CD/DVD

I can't get iWeb started. It does not complete the starting procedure

I can;t start iWeb. It does not complete the startup procedure, and then becomes frozen. I've installediWeb 3.04, but same results. What can I do?

Try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
Happy New Year

When I sync my phone it gets to step 6 the does not complete the sync i get a message that says itunes has stopped working and needs to close anyone else have this issue

When I sync my phone it gets to step 6 the does not complete the sync i get a message that says itunes has stopped working and needs to close anyone else have this issue

The same problem here!... My itunes stucks on "preparing to sync" when sync my ipad 2, and stucks on iphone 4 calendar sync...
Any solution?? Need help, please!!
Macbook pro 13 i7
Iphone 4
Ipad 2
Thanks!!!

Lenovo RnR backup does not complete succesfull​y

Similar Messages

Maybe you are looking for

Lenovo RnR backup does not complete succesfully