Lenovo S400u not booting. error 0xc0000098. Any help is welcome
Hello. I pressed the power button for apparently more than 10 seconds without the battery by guideline mistake. Now the laptop is showing error 0xc0000098 and I can't boot properly.
OneKey recovery is not showing up properly. Appears like new button menu and few options like Normal startup(not working) , BIOS setup, boot menu and system recovery are disposed.
I never did a backup. Never used onekey recovery. I tried the system recovery option and show two options for selection:
Restore to the default backup (when I bought I suppose)
Restore user backup.
As I said, I never used the backup and probably never made one.
I don't want to lose my archives and I dont know if I will be able to keep all my archives safe if I press any of both options.
Apparently, when I chose somewhere else to select any other user backup destination/image, everything is there. So I don't know why the boot is not loading normally.
Please sorry if my question is ttoo simple. I wish I can fix this up without losing nothing. Thank you in advance. Any question that could help fixing it or any information please help. I use win 8.1 64bit OS. Thank you once again.
Hi Pinksoda,
Thank you for replying and sorry for the delay.
DISCPART refers to the partition while installing the operating system, if you want to backup the data you should not delete the data while reinstalling the data. Please take a data backup into your external drive and then reinstall the operating system. As you also mentioned that you have tried with both windows and linux. The DISCPART errors occurred due to clash of the operating systems, as the partition table may vary hence try to install the OS which you want to work as there will be no clashes in the operating system.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!
Similar Messages
-
SP2-0552: Bind variable not declared error. Any help please?
Hi Experts,
I have a question regarding the error that I am getting: SP2-0552: Bind variable "V_COUNT_TOT_BAL" not declared.
I have 'out' parameters declared in my procedure and executing the same from sql script as shown below:
set ver off
set serverout on
set linesize 8000
Declare
Variable v_count_dtl_bal NUMBER(10);
Variable v_updat_dtl_bal NUMBER(10);
Variable v_count_tot_bal NUMBER(10);
Begin
execute load_abc.insert_abc_bal(:v_count_dtl_bal,:v_updat_dtl_bal,:v_count_tot_bal);
End;
exit;
So, when this sql script runs it given me the above error. However, all the result looks good and there's no problem with the data or anything else that might be impacted. I suspect this error stems from the code in the sql script above.
Any idea what am I doing wrong?
Thanks in advance for any inputs.Thanks Frank. I still receive the same error if I follow your example or any of the ones explained above. This is what I am getting and still an error underneath:
Usage: VAR[IABLE] [ <variable> [ NUMBER | CHAR | CHAR (n [CHAR|BYTE]) |
VARCHAR2 (n CHAR) | NCHAR | NCHAR (n) |
NVARCHAR2 (n) | CLOB | NCLOB | REFCURSOR |
BINARY_FLOAT | BINARY_DOUBLE ] ]
Usage: VAR[IABLE] [ <variable> [ NUMBER | CHAR | CHAR (n [CHAR|BYTE]) |
VARCHAR2 (n CHAR) | NCHAR | NCHAR (n) |
NVARCHAR2 (n) | CLOB | NCLOB | REFCURSOR |
BINARY_FLOAT | BINARY_DOUBLE ] ]
Usage: VAR[IABLE] [ <variable> [ NUMBER | CHAR | CHAR (n [CHAR|BYTE]) |
VARCHAR2 (n CHAR) | NCHAR | NCHAR (n) |
NVARCHAR2 (n) | CLOB | NCLOB | REFCURSOR |
BINARY_FLOAT | BINARY_DOUBLE ] ]
SP2-0552: Bind variable "V_COUNT_TOT_BAL" not declared. -
Updated iTunes and iPhone but would not sync, error 13019 any help
I have done latest updates for both iTunes and iPhone but still shows error 13019, pls help
This might help
http://support.apple.com/kb/TS2830
Also, if you Google "iTunes error 13019", you might find other stuff -
my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!
If you want to solve your problems, unjailbreak. And don't do it again, because jailbreaking causes problems as you read about in that article. You can try Recovery Mode: http://support.apple.com/kb/HT1808
-
When I reboot my iMac I'll get hard disk selection instead of fast login and I am not using boot camp! Any help is greatly appriciated!
Have you selected which disk you want to boot from? In System Preferences, click startup disk and choose the drive you want as your default boot drive.
-
Error message: Ipod software update server could not be contacted. I went to control panel, lan settings, clk'd auto detect settings and ok. When i went back to i tunes and clk's update, i got the same error. Any help is appreciated.
Rand221See the previous posts on the right side of this page under the heading "More Like This" that have you same error message.
-
HT201413 error 1600 is not solve so pls any help me.
error 1600 is not solve so pls any help me.
and contect me.
pls...........
thank u> How many times have you posted this question by now?
5 times:
http://forum.java.sun.com/thread.jspa?threadID=650196
http://forum.java.sun.com/thread.jspa?threadID=650958
http://forum.java.sun.com/thread.jspa?threadID=655214
http://forum.java.sun.com/thread.jspa?threadID=655229
http://forum.java.sun.com/thread.jspa?threadID=655231 -
Imac will not boot up... help.
imac powers on. You come to the gray screen with the apple & the circle below it just keeps spooling around. imac at that point not making much of a sound. I have powered on & off a bunch of times. Just stuck & not booting up. Any suggestions other than bringing it to the store for tech?
If you have Lion installed:
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
If you have Snow Leopard installed:
Reinstall Snow Leopard without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/. -
Facetime is not available error message, any suggestions?
facetime is not available error message, any suggestions?
Hi ftruseljr,
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link to see more details and screenshots.
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
Cheers,
- Judy -
HP pavilion g6 do not boot nothing from any media
Hi, I have this notebook (HP Pavilion g6-1010sc) and one day it do not boot nothing from any media.
I tried to boot linux, winxp, original win7-x64 from internal and external USB disks, but unfortunatelly.
Notebook restarts or freezes after i tried to boot OS. Start of booting OS is correct, in original win7 it asked to run system normally or launch system repair. After i choose normal startup, its normally starting and only one point of WIN7 loading logo is shown and after this freezes.
When I run win7 installation from USB HDD or launch system repair, windows loaded files correctly, but after this, system restarts and capslocks LED blink two or three times and notebook startup again.
I have on second USB HDD linux ubuntu, which work on every computer correctly, but on this computer it freezes after small time.
I tested Back Track5 from DVD and during boot notebook restarts after one minute too.
I have tried to remove original HDD and try boot other USB HDD/DVD too, but no change. I tried other memory modules, but no change too.
System diagnostics of RAM and HDD is correct and no problem found.
Original bios on this notebook was F6.A and I tried older version F53 and only one change is, that in booting is shown more piece of WIN7 boot logo, and again freezes.
I tried disable automatic restart after system failure, but notebook it does not react on this, when it want to restart or freeze, it does it
Sorry for my englishNo, i do not think, that I have UEFI bios. After I pres ESC and after F2 or directly after turn on press F2, my diagnostic menu looks as this:
This diagnostic tool is stored on HDD, when I removed HDD, this tool can not to run.
(By the way, tests will be passed.)
And original system is WIN7x64 and on support page is only this system and cannot be selected other operating systems, e.g. WIN8, which fully supports UEFI.
This reply is no solution for me. I tested internal HDD in different computer and it is 100% correct, and RAM i tried to change with other 100% correct modules as I wrote on last post and no change.
This means, that RAM and HDD is correct. I want to know, whether is error in notebook's mainboard or bios or some different.
I think, I am not first with such problem, and I do not want know solution only, but I want also know reason.
Thanks for reply, but it is no solution for this problem, and is outside. -
I google'd it and came up with nothing.
Basically, put in a new hard drive into my laptop and everything is fine, moved everything over including the itunes folder. It sees my music but does not allow me to authorize my computer or even allow me to sign in. When I try, I get the above error.
Any help please?Sounds like an issue with your browser settings, not the site. Also, this is not the proper forum for posting a technical question about the site itself.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you! -
My MacBook Air is not charging...any help?
Model Name: MacBook Air
Model Identifier: MacBookAir4,2
Processor Name: Intel Core i5
Processor Speed: 1.7 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 3 MB
Memory: 4 GB
Boot ROM Version: MBA41.0077.B11
Model Name: MacBook Air
Model Name: MacBook Air
Model Identifi
Total Number of Cores: 2
L2
L3 Cache: 3 MB
Memory: 4 GB
Boot ROM VerHi HarmitClaire,
Welcome to the Apple Support Communities!
I understand that your MacBook Air is not charging as expected. In this situation there are troubleshooting steps that I would recommend. Please use the attached article as a resource for steps to help you resolve this situation.
Mac notebooks: All about batteries - Apple Support
My battery is not charging
Confirm the correct wattage AC adapter for the computer. A power adapter rated for a lower wattage than is required for the system may not reliably charge the computer. For assistance identifying the proper adapter, review Intel Based Mac notebooks: Identifying the right power adapter and power cord--US. Additional adapter troubleshooting is available in Troubleshooting MagSafe adapters. If issues persist please reset the SMC.
Best regards,
Joe -
"the directory E: could not be created." any help?
Upon initial start up (after effects CC) an error sign appears saying
"the directory E: could not be created."
any help?We need to know a lot more to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"
Where did you install After Effects? It should be in the default application installation location for your operating system. -
I have a USB cable for my iPod touch 4th gen. I have tried almost everything to make my windows computer find my iPod touch but its not finding it. Any help on this issue?
If not successful:
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Try another USB port and cable
Try another computer to help determine if you have an iPod or computer problem -
After migrating all of my adobe software (Cs4, cs5, etc.) to my new imac, the software won't open due to many errors. Any help on this?
Welcome to the Apple Support Communities
Adobe software is conflictive when you use Migration Assistant because their applications don't work properly after migration. If you keep the DVDs or the installers of your software, use them to reinstall all your Adobe applications and they should start working correctly
Maybe you are looking for
-
The Idea is to set my paper size and page layout to a pre-screened 4x6 layout, which I can add and insert txt/pictures, when I need to print, I should be able to fit 2 per page, if not that's okay, but when I print them I will cut off the excess pape
-
How do i install php on my mac pro os x lion
I want to install php on my macbook pro that currently runs os x lion.
-
Pls help me with this function
i want to write a function with parameters String striker,String nonstriker and Integer runsscored. how can i write this with the following conditions 1.when runsscored ==1 or 3 or 5 or 7 striker and nonstriker should interchange and in other conditi
-
Will Adobe Audition 3.0 work in Windows 8
Will Adobe Audition 3 work with Windows 8?
-
Is it true that Macbook Air is no longer allowed on planes?
Is it true that Macbook Air is no longer allowed on planes?