Lenovo S60 Wallpaper scrolling not working

Hi All, I have lenovo S60-a upgraded to Lollipop. After that i noticed that one of the features in homescreen customization > wallpaper scrolling not working anymore. So i can't swipe from the edge of my lenovo screen, to change the wallpaper. Previously on KitKat its working fine. Is there any fix for this  ? or someone using Lenovo S60-a Lollipop has the same problem ?

Yes, its a features that others phone don't have. The Kitkat on Lenovo is more stable than Lollipop. I wonder is it possible to downgrade it to the original Kitkat version if i bring the phone to Lenovo Service Center? When i updated to Lollipop, i forget to check for the bugs that other users facing using the lollipop. So if it is possible to downgrade, i would like to downgrade it to kitkat. Thanks for the reply anyway.

Similar Messages

  • Lenovo G510 touchpad scrolling not working in windows 7

    I have a windows 7 - 64 bit operating system on a Lenovo G510
    I have installed Touchpad driver for windows 7 from Lenovo site but i found very annoying problem which is the touchpad scrolling function not working .....
    Please Help
    Solved!
    Go to Solution.

    hi Shady710,
    Welcome to the Forums.
    If you have a Synaptics Touchpad, can you check if you have a One Finger / Two Finger Scrolling feature under Mouse Properties.
      - Link to picture
    Let me know how it goes.
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo B560 touchpad scroll not working on Windows 7

    As the title says, the vertical touch-scroll is not working in certain programs. It works in my browser, but not with OneNote or PDFs. It also works on Microsoft Word. The touch scroll actually did start working for a few days randomly, but then went back to not working. I didn't update anything during either of those times. When I do attempt to use the touch scroll, a cursor icon appears that looks like a little scroll bar.
    I have tried updating the drivers, which did not work. I have made sure all setting are correct and that touch scrolling is enabled. This problem is really driving me nuts, so any suggestions are appreciated.

    Hi Kukari. If you are experiencing the same issue on the same computer in the same operating system, unfortunately there are no Windows 8.1 drivers available for the HP Pavilion dm4-3050us Entertainment Notebook on the HP driver download page.
    HP offers version 16.2.10.12 which you can try to reinstall (if you have not).
    Synaptics TouchPad Driver (Windows 8.0)
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-109924-1&cc=us&dlc=en&lc=en...
    Synaptics offers version 17.0.19, although it may not be compatible with your TouchPad.
    Windows 8/7/XP/Vista 64/32-bit Edition v17.0.19:
    http://www.synaptics.com/resources/drivers
    If the loss of functionality occurred after the Windows 8.1 update, you can either wait to see if the appropriate drivers are released for your notebook, or revert back to Windows 8.0.
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • HI! Firefox ask me to do update and now ia have 4,0 but now my laptops touscpad scroll not working? i have lenovo t61 and i m useing xp. What i must to to

    HI! Firefox ask me to do update, and now ia have 4,0 but now my laptops touchpad scroll not working? i have lenovo t61 and i m useing xp. What i must to to

    Hmmm, Norton extensions are broken again in Firefox 4.0.1. It seems that Norton didn't allow for Firefox 4.0 security updates when they updated their Firefox extension for Firefox 4.0. Norton says they'll have a fix in two weeks. A Norton user posted a fix in this forum thread.
    http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-not-compatible-with-FF-4-0-1/td-p/442788

  • Why is scrolling not working with multiple youtube embeds layed out vertically in a stack on one page?

    Why is scrolling not working with multiple youtube embeds layed out in a stack on one page?

    Hi ,  
      This is a sort of performance issue , because your program takes more than the max time set for the program to execute in foreground.
    There are many stuff in program which will hamper your performance.
    I will list down a few
    1. SELECT *
    FROM konp
    INTO CORRESPONDING FIELDS OF TABLE konp_itab
    FOR ALL ENTRIES IN a363_itab
    WHERE knumh EQ a363_itab-knumh
    in this statement you are using for all entries a363_itab , but before this statement you are not checking if the table has any entry or not , please do remember that for all entries has this characterstic , that if you internal table does not contain any record , then all the records are selected from the database table. So in this case if you table a363_itab is empty , so what you want is no data must be seelcted from table konp , but what will happen is all the records in KONP will be seelcted.
    2. While retreiving data you are using seelct * even though you do not require all the fields , an example is
    <b>SELECT *
    FROM mkpf
    INTO CORRESPONDING FIELDS OF TABLE mkpf_itab
    FOR ALL ENTRIES IN mseg_itab
    WHERE mblnr EQ mseg_itab-mblnr.</b>
    in this your internal table contains only 2 fields
    <b>mblnr LIKE mkpf-mblnr, "Number of Material Document
    bldat LIKE mkpf-bldat, "Document Date in Document</b> , but to get these 2 fields you are selecting all the fields of the table.
    3. In select you are using into corresponding fields of table , it is not a good practice., so please avoidd it.
    Please understand that you must try to reduce the access to your database tables and try to keep it minimal , because this same thing may happen becasue data in DEV is very less compared to the volume of data in production , so a program working in DEV will take much more time in PRD if not written properly and may result in timeouts , as in your case.
    Please try to make chanegs to the prorgam and see if it works.
    In case you have more queries , please do revert back.
    Regards
    Arun
    *Reward points if replay is helpful

  • Lenovo b590 power management not working

    Hello! I have a problem with my laptop, a lenovo b590. (pentium 2020m, 4gb ram, intel hd graphics): the Lenovo Power Management driver not working.... 
    Is exactly the same as here, but, the only difference is that I use windows 8.1: 
    https://forums.lenovo.com/t5/Lenovo-3000-and-Essential/Lenovo-B590-Lenovo-Power-Management-driver-no...
    As no one could solve the problem there, I thought it may be more visible now and someone can help me
    So, how can I solve this problem?
    Edit: I tried everything that was said there, to no avail ...
    Sorry for my english..

    i'm not sure if there's any suitable cooling pads for your computer but cleaning the fan could be another solution. it may work but it may also void your warranty.
    due to it's probably hardware issue, at this point i don't think i have much suggestions for you.

  • I already update my os to ios7 but the panorama wallpaper is not working, i try to use before the ios7 beta, the panorama is working. Why in this ios7 is not working. Could anyone help me????? Thanks

    I already update my os to ios7 but the panorama wallpaper is not working, i try to use before the ios7 beta, the panorama is working. Why in this ios7 is not working. Could anyone help me????? Thanks

    That's odd.
    Try this: Unplug your Time Capsule and your router. On your MBP, click the Wi-Fi icon and select "Open Network Preferences".
    Click the lock icon to authenticate, then click the "gear" and select "set service order". Wherever AirPort (or Wi-Fi - I forget what Snow Leopard calls it) appears, drag it elsewhere in the list. Click OK, then Apply, then power up your router and TC.
    If that doesn't result in any change, repeat the above but try making the service(s) you do not need "inactive".
    The purpose of this is to reset or at least change your Network Preferences, which somehow got confused upon upgrading to SL.

  • Lenovo B570e Scroll not working

    Dear peoples i bought the Lenovo b570e i3,4gb 500gb, i install a Win7 and install all the drivers but my Scroll is not working...?
    Kindly tell me how to activate it?
    Moderator note; e-mail address removed to stop the spambots getting it

    lenovo b750e..how to operate the scroll option it is not working..

  • ThinkPad X1 Carbon scrolling not working

    Hello,
    I just received my new ThinkPad X1 Carbon (Type 20A7). This is running with Windows 7, 64 bits.
    Scrolling from the touchpad (with one or two fingers) does not work.
    I tried installing the latest drivers from Lenovo's website (although you would assume that the latest drivers are installed when you buy a new machine), but that did not help.
    When I go to the control panel and to the advanced settings for the touchpad, I can see that the scrolling features are activated. They just don't work.
    Sometimes, I notice that after startup, scrolling works for a couple minutes, then not anymore.
    Could you please help me out?
    Thank you,
    Cheers.

    Hi realkirua, and welcome to the Lenovo User Community!
    Remember that this is users helping users here, moderated by volunteers like me. Although there is some Lenovo presence, they can't patrol the entire community. They do try to help with some of the broader issues.
    The odd part about what you describe is that the UltraNav driver install fails (6hgx81ww.exe). Have you tried manually uninstalling the old one (Control Panel>Programs and Features) then runnning the installer again?
    I don't work for Lenovo. I'm a crazy volunteer!

  • External mouse scrolling not working

    The scrolling function of my external mouse does not work when the MacBook Pro is not plugged in with its powercord. The mouse buttons seem to be functioning.  So does as an external keyboard. My wife has the same problem (using 10.6.2 OS). There are no options in the System Preferences that deal with this. Is this just an oversight by Apple? This basically makes using an external keyboard and mouse a nonviable option for a laptop unless you are near an electric outlet. If you know of a workaround I would appreciate the information. If not, it is something Apple will have to correct as it a pretty obvious oversight.
    Thanks in advance for any advice.
    Tony

    Check your settings when it is unplugged to make sure they are still properly configured.  You might even want to try and disable the trackpad when a mouse is being used.  I would also check out USB Overdrive (Shareware).

  • Continuous scrolling not working in Calendar month view

    Scrolling does not work in Calendar month view. I have toggled System Preferences >General > Show scroll bars to "Always on." Still nothing in Calendar month view.
    BUT, wait! Now every other app (except Calendar month view) now has the scroll bar "Always on" even though I toggled back to "Automatically based on...", then restarted my computer. I don't want to see the scroll bars all the time but now I can't hide them anywhere. It seems "Always on" amd "Automatically based on..." now do the same thing. Serious bug.
    Any hints? Thanks

    This is odd,  but the calendar scrolling in Month view is working on my machine.   It's been through various reboots - and I checked the disc (SSD) and permissions.
    Seems to me that the calendar application is sensitive to the scrolling. 
    Also,  I've been suffering from Firefox vertical scrolling stopping.  The "fix" is to quit & restart Firefox.  However... this scroll-crashing behaviour goes away for a few days then comes back with a vengence.  Again,  I've a feeling that a full reboot seems to help things.
    Yet another mouse-related problem I've been having is with VMWare.  These frequently interpret a single-click as a double-cliick or even triple-click.  Some chatter in the VMWare forums about this too.
    All of this behaviour *never* ocurred prior to the Mavericks upgrade.

  • Lenovo A1 - Touch screen not working after digitizer replacemen​t

    After dropping my tablet and breaking the digitzer, I ordered a replacement digitzer from a company in China. (It took about a month to get it) After watching this video, I was able to install my new digitizer and it finally looked new again....well at least the screen!
    But.....when I powered up my tablet, the touch screen wasn't working..... I emailed back and forth with the company and they told me to install drive program, and send me a link to a site with a video, this site may have contained more than the video, but it was all in Chinese and I couldn't figure it out even with Google Translate. So I started researching. I thought I would try and load ICS on it, I thought, "Whats the worst thing that could happen?" it wasn't much more than a brick at this point anyways. 
    I found this website that let me through installing ICS on it. I had absolutly no expectations...but IT WORKED!!!! MY TOUCH SCREEN IS NOW WORKING!!!! I COULDN'T BELIEVE IT!!!
    When I was researching for this problem, there was absolutly no posts anywhere for "Touch screen not working after new digitizer". So I wanted to share my experience.

    Yea you are correct.....it must be a hardware problem. You must contact service centre of Lenovo and get help from there.
    You can say thank you by pressing the star left to my post IF I HELPED YOU

  • Trackpoint scrolling not working in Safari

    I have an x61s running Windows Vista business (32 bit).
    Problem is the trackpoint scrolling feature not working in Apple web browser Safari.
    Somewhere on the web I found instructions for fixing this by editing file tp4table.dat located in c:/windows/system32
    However, I cannot find any such dat file in that location.
    I did find a file with that name in the following location:
    C:\Windows\System32\DriverStore\FileRepository\tp4​track.inf_45c84db5\tp4table.dat
    To this file I added the following lines:
    ;iTunes/Safari Scroll Fix
    *,*,itunes.exe,*,*,*,WheelStd,0,9
    *,*,Safari.exe,*,*,*,WheelStd,0,9
    However, this did not help, trackpoint scrolling still doesn't work in Safari.
    Does anyone have an idea how I can get this working?
    Thanks
    Solved!
    Go to Solution.

    Re 1: Yes I did reboot. Did it again just now (turned on the machine) and still not working...
    Re 2: I put them just above the [AutoScrollTable] line. The following quote shows an extract of my edited tp4table.dat file (located at the path indicated in the first post of this thread)
    ; Eudora
    *,*,eudora.exe,EudoraMainWindow,AfxFrameOrView42,I​nternet Explorer_Server,WheelStd,1,9
    *,*,eudora.exe,EudoraMainWindow,AfxFrameOrView70,I​nternet Explorer_Server,WheelStd,1,9
    *,*,eudora.exe,*,EudoraMainWindow,MDIClient,WheelV​key,0,9
    ;iTunes/Safari Scroll Fix
    *,*,itunes.exe,*,*,*,WheelStd,0,9
    *,*,Safari.exe,*,*,*,WheelStd,0,9
    [AutoScrollTable]
    ; AUTO SCROLL TABLE  AUTO SCROLL TABLE  AUTO SCROLL TABLE
    ; AUTO SCROLL TABLE  AUTO SCROLL TABLE  AUTO SCROLL TABLE
    ; AUTO SCROLL TABLE  AUTO SCROLL TABLE  AUTO SCROLL TABLE

  • Why is my ThinkPad track point scroller not working in Firefox 4?

    Today as advised by you I have installed Firefox 4 on my ThinkPad Z60m laptop. Earlier with Firefox and all other application worked fine but now its not working on Firefox 4 yet working fine on MS IE and other applications. Please let me know soonest or else I being an avid user of the IBM track point will discontinue using Firefox altogether.

    For me the solution given here worked on my Thinkpad T42 WinXP:
    http://aslezak.com/thinkpad-trackpoint-scrolling-in-firefox
    Open this file in Notepad:
    C:\Program Files\Synaptics\SynTP\tp4table.dat
    Find this line:
    ; Pass 1 rules (These rules run last)
    Add the following lines above that:
    ; Firefox
    *,*,firefox.exe,*,*,*,WheelStd,0,9
    *,*,firefox.exe,*,*,MozillaWindowClass,WheelStd,0,9
    *,*,firefox.exe,*,*,MozillaDropShadowWindowClass,WheelStd,0,9
    *,*,firefox.exe,*,*,MozillaUIWindowClass,WheelStd,0,9
    *,*,firefox.exe,*,*,*,WheelVkey,0,9
    Save the file and restart the machine.

  • Bug: Browser Inner-Scrolling Not Working

    If a web page I am visiting on my Palm Pre Plus has a section which scrolls separately from the rest of the page then the browser will not support it. Here are some examples:
    1) Towards the bottom are sections of code examples. The section with the longer piece of text scrolls horizontally on my PC because it is wider than my browser. On my pre, it is truncated.
    http://developer.palm.com/index.php?option=com_content&view=article&id=1761&Itemid=42&limitstart=2
    2) The bottom left displays a list of locations. This section scrolls vertically on my PC but not on my pre
    http://www.navyfederal.org/about/locations.html
    3) The section of rates is truncated at the bottom.
    http://www.navyfederal.org/rates/rates-frameset.html
    Pretty much any page I visit which has an area with it's own scrollbars on my PC will not work on my pre.
    I hope these issues can be fixed soon. It is very restricting.
    Thanks,
    Scott

    Palm has logged this in its software issue tracking system. We endeavor to continuously improve our software quality and thank you for bringing this to our attention. We are grateful to the community and will evaluate options based on customer feedback and software best practices.

Maybe you are looking for