Lenovo s8-50LC Wifi Freezing Error

This is to request you all that I have Lenovo S8-50LC tablet but a strange problem I am facing its wifi searching capacity is poor and if its not there it stops recognising the wifi singals. then need to restart everytime to re activate the same.. Pls help me if anyone has any idea of the same.

Right, but if you have the SIM in the tablet and you put the tablet in airplane mode, does wifi work then? If so, it may be a bad SIM. Do you have another SIM you can try?

Similar Messages

  • Lenovo S8-50LC Wlan(WiFi) Does not work when use Sim Cart(3G)

    Hi
    Tablet Lenovo S8-50LC
    Wlan(WiFi) Does not work when use Sim Cart(3G).
    What is the solution for this problem?
    Build Number : TABS8-50LC_S000200_150121_ROW
    SoftWarw Version : TABS8-50LC_150121

    Right, but if you have the SIM in the tablet and you put the tablet in airplane mode, does wifi work then? If so, it may be a bad SIM. Do you have another SIM you can try?

  • My ipad2 is nearly useless since the instalación of ios8.0.2, the screen does not respond to touch, wifi freezes

    SInce the installation of IOS8.0.2, my iPad 2 is nearly useles. The touch screen does not work, wifi freezes constantly, I am requested continuous to input my iCloud username and passcode. And the system is soooo slow that I have started to use again my old pc to do Internet searches. I have tried the iPad turning off and on but the problems restart shortly afterward. Any suggestions what can I do ? Is Apple doing anything in this regard?

    Try some basic troubleshooting:
    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    (C) Setup as new (data will be lost if you do not have backup)
    Settings>General>Reset>Erase all content and settings

  • My Macbook PRO wifi freezes in some minutes.

    My Macbook PRO wifi freezes in some minutes. I have to disable and enable again several times.

    Start with these:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    If you have been using the same settings since forever, open
    System Preferences > Network > Wifi > ( Assist me ) ...
    ... and use the Setup Assistant to set it up again from scratch, including a completely NEW "Location".
    If yopu still have problems, downlaod iStumbler to look around at what other devices are around you, what channels they are using, and what the signal levels and noise levels of thi=ose devices versus your Router might be.

  • Shockwave Flash and freeze errors in Forms Central

    Everyone on my team is having issues opening Forms Central - Shockwave Flash and freeze errors. Is this an error with everyone?  Its affecting 26 people.

    Nicole,
    I am sorry to hear you are having problems logging in. I just tested this function on Safari and Chrome and had no problem. Can you tell me about the systems that are experincing the problem. What OS? What Broswer? What version of Flash is installed? Are the systems individually managed or managed by a central IT group?
    Andrew

  • Captivate 4 freezing errors

    I am using Captivate 4. I have a base project size 800x600.  I have additional slides that I'm importing (795x560), because of a smaller screen. I'm am having major file corruption and file closing errors. Is this screen size diff. causing the errors? 

    Noel,
    I totally understand your frustration.  I too, have resorted to the copy slide by slide method.  But I have done other things to deter freezes.
    I have had to do several things:
    1.  Are you working from server?  If so, start working on your document from your desktop. I then transfer my day's worth of saved documents back to the server to be backed up.
    2.  Save, save and save.  I save a NEW document (File>Save As) every 15 minutes or so, depending upon how much work I've done to my project. (That way, if it does crash, I've only lost 15 minutes and have an uncorrupted file to go back to.
    3.  Keep your file size down.
         a. That means saving your pictures at their actual size in the document.  (Are you finding that when you insert a picture, you get the screen prompt that asks you to crop or reduce the picture size? - Then your pictures are too big.)
         b.  What screen capture size are you using?  Use the smallest possible size.  800x600 has worked well for me and also makes it easier for the end user to view the project (they don't have to scroll up and down to see the screen.)
    4.  Delete unused items.  In the library window, click the Select Unused Items icon (this will select all unused items from your documents) and then click the Trash can icon.  (Just because you delete a picture or audio clip from a slide, Captivate does NOT remove it from the document until you delete from the library.  This takes up a LOT of space).
    5.  Start a Freeze/Error log.  I have started a log to remind me what I was doing at the time of the freeze up to try to pinpoint the cause.  At this time it appears random.  Maybe you can find a common link.
    Adobe has not given me any other suggestions or fixes.  The above steps are the only that have kept my sanity and freezes to a minimum.
    Good Luck!
    Twistergrl

  • Lenovo V560 drops wifi connection - cannot restore without reboot

    Hello,
    First off let me say that I'm  earning a BS in Computer Science, so I know more than most when it comes to computers, yet this issue vexes me.  I only say that so that any replies understand that my level of technical comprehension is far above average.
    The title pretty much says it all, I have a 6month old Lenovo Ideapad V560 that cannot maintain an internet connection.  Let me describe the problem in a little more detail:
    PROBLEM:
    This computer can connect to any wifi, and seems to drop the connection fairly randomly, however it will drop the connection FASTER when I'm more active, such as loading multiple web pages simultaneously.  That said, it ALWAYS drops the connection during a session, and NOTHING I do can restore the connectivity apart from rebooting.
    This issue has nothing to do with the router, as it happens on every wifi connection I've ever connected to, school, home, work, McDonalds, etc.
    I've already extensively researched the issue, so please don't reply and just start linking me to related threads, I've read them, they weren't helpful.
    I've done a few things already in an effort to resolve the issue, such as:
    1) Re-installing Windows 7 Pro x64
    2) Re-installing wifi driver
    3) Disassembling the machine, removing and reinstalling the wifi Card
    4) Disabling "Allow computer to turn device off" power management settings for wifi card and miniport (all network devices, actually)
    5) Removing all Lenovo "bloatware"
    Again, it is not a connection specific issue, it doens't matter how the connectio is configured, it seems indepedant of that. 
    Any help anyone can offer would be helpful!

    On topic: I have the same issue with Lenovo B560 (factory installed WiFi adapter: GTC BCM4313 M).
    In the same time and the same WiFi network my old Lenovo IdeaPad Y550 works perfectly.
    Is there any way to make this Broadcom (or GTC?) adapter work uninterruptable?
    Currently it requires to reboot or hibernate and power on again to revive adapter.
    Off topic: yesterday instead of my message about the same issue posted I have seen the following error:
    Please correct the highlighted errors and try again.
    Post flooding detected (community got posts of a unique message more than 1 times within 3,600 seconds)
     But the message has been tried to be posted once.

  • Lenovo R61 Windows XP Freezing

    Hello!
    I have original recovery cd of Windows XP for lenovo R61/T61 models.
    I currently have Lenovo R61 type 8933-A32 model.
    It install fine, but after that in starts randomly freezing:
    - In bios I choose compatibility mode not AHCI, due to fact that Win XP SP2 don't have necessary drivers.
    - I updated BIOS
    - I updated all the drivers via Lenovo system update utility. (no yellow exclamation marks in manager)
    - Installed SP3
    - Installed Intel matrix storage driver (no effect)
    Freezes are random, i cannot duplicate them. In the evenet viewer I get no errors.
    To stop freeze I have to shutdown the computer.
    !!!! I am curently using Linux Mint 13 Mate -> not a single problem so far. Working fine, so problem in not hardware but software related.
    And ideas?
    Solved!
    Go to Solution.

    Hello!
    I just unistalled power manager, no luck. Freezing continues.
    I tried original:
    Windows XP for lenovo T61/R61
    Windows 7 Proffesional
    -> freezing continues
    I have one remark, regarding windows 7. When laptop was on battery power it was working ok, when i pluged it it frote within 1minute.
    When I installed windows 7 again, it was freezing again and again - ACPI error was seen on event viewer.
    Today I wil install windows vista, and tried if it is working fine - vista was preinstalled on my R61.
    To date - linux in working like a charm!
    Perhaps there is some glich in BIOS that is the cuse for freezing. For know for my type 8933-A32 there is no new BIOS updates - 2.24 is the newest...

  • Lenovo Twist Lag Spike / Freeze

    I recently got a lenovo twist and have noticed that as I use it on a day-to-day basis, the machine is guaranteed to freeze for at least 20 seconds during a use "session."
    This can happen during any situation of computer use (gaming, word processing, browsing, watching movies, etc...). Has anyone else encountered this issue and is there an active fix?

    I have looked at the error logs and I get these types of errors. This was after a freeze that lasted 3-5 minutes. Seems like some problems with the disk or something. The list of errors are actually a lot longer but the forums wont let me post them
    Error 6/18/2014 5:02:05 PM Service Control Manager 7000 None
    Warning 6/18/2014 5:01:59 PM disk 153 None
    Warning 6/18/2014 5:01:59 PM iaStorA 129 None
    Warning 6/18/2014 5:00:59 PM disk 153 None
    Warning 6/18/2014 5:00:59 PM disk 153 None
    Warning 6/18/2014 5:00:59 PM disk 153 None
    Log Name: System
    Source: Service Control Manager
    Date: 6/18/2014 5:02:05 PM
    Event ID: 7000
    Task Category: None
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: pbatoon-Laptop
    Description:
    The pcicsa.sys service failed to start due to the following error:
    The system cannot find the file specified.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7000</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-18T21:02:05.542133000Z" />
    <EventRecordID>17221</EventRecordID>
    <Correlation />
    <Execution ProcessID="916" ThreadID="2056" />
    <Channel>System</Channel>
    <Computer>pbatoon-Laptop</Computer>
    <Security />
    </System>
    <EventData>
    <Data Name="param1">pcicsa.sys</Data>
    <Data Name="param2">%%2</Data>
    <Binary>7000630069006300730061002E007300790073000000</Binary>
    </EventData>
    </Event>
    Log Name: System
    Source: disk
    Date: 6/18/2014 5:01:59 PM
    Event ID: 153
    Task Category: None
    Level: Warning
    Keywords: Classic
    User: N/A
    Computer: pbatoon-Laptop
    Description:
    The IO operation at logical block address 0xb35600 for Disk 0 (PDO name: \Device\00000037) was retried.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="disk" />
    <EventID Qualifiers="32772">153</EventID>
    <Level>3</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-18T21:01:59.166356800Z" />
    <EventRecordID>17219</EventRecordID>
    <Channel>System</Channel>
    <Computer>pbatoon-Laptop</Computer>
    <Security />
    </System>
    <EventData>
    <Data>\Device\Harddisk0\DR0</Data>
    <Data>0xb35600</Data>
    <Data>0</Data>
    <Data>\Device\00000037</Data>
    <Binary>0F01040004002C00000000009900048000000000000000000000000000000000000000000000000000000228</Binary>
    </EventData>
    </Event>
    Log Name: System
    Source: iaStorA
    Date: 6/18/2014 5:01:59 PM
    Event ID: 129
    Task Category: None
    Level: Warning
    Keywords: Classic
    User: N/A
    Computer: pbatoon-Laptop
    Description:
    Reset to device, \Device\RaidPort0, was issued.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="iaStorA" />
    <EventID Qualifiers="32772">129</EventID>
    <Level>3</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-18T21:01:59.166356800Z" />
    <EventRecordID>17218</EventRecordID>
    <Channel>System</Channel>
    <Computer>pbatoon-Laptop</Computer>
    <Security />
    </System>
    <EventData>
    <Data>\Device\RaidPort0</Data>
    <Binary>0F001800010000000000000081000480040000000000000000000000000000000000000000000000000000000000000000000000810004800000000000000000</Binary>
    </EventData>
    </Event>
    Log Name: System
    Source: disk
    Date: 6/18/2014 5:00:59 PM
    Event ID: 153
    Task Category: None
    Level: Warning
    Keywords: Classic
    User: N/A
    Computer: pbatoon-Laptop
    Description:
    The IO operation at logical block address 0x371e9500 for Disk 0 (PDO name: \Device\00000037) was retried.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="disk" />
    <EventID Qualifiers="32772">153</EventID>
    <Level>3</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-18T21:00:59.166274000Z" />
    <EventRecordID>17217</EventRecordID>
    <Channel>System</Channel>
    <Computer>pbatoon-Laptop</Computer>
    <Security />
    </System>
    <EventData>
    <Data>\Device\Harddisk0\DR0</Data>
    <Data>0x371e9500</Data>
    <Data>0</Data>
    <Data>\Device\00000037</Data>
    <Binary>0F01040004002C00000000009900048000000000000000000000000000000000000000000000000000000228</Binary>
    </EventData>
    </Event>
    Log Name: System
    Source: disk
    Date: 6/18/2014 5:00:59 PM
    Event ID: 153
    Task Category: None
    Level: Warning
    Keywords: Classic
    User: N/A
    Computer: pbatoon-Laptop
    Description:
    The IO operation at logical block address 0x86f720 for Disk 0 (PDO name: \Device\00000037) was retried.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="disk" />
    <EventID Qualifiers="32772">153</EventID>
    <Level>3</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-18T21:00:59.166274000Z" />
    <EventRecordID>17216</EventRecordID>
    <Channel>System</Channel>
    <Computer>pbatoon-Laptop</Computer>
    <Security />
    </System>
    <EventData>
    <Data>\Device\Harddisk0\DR0</Data>
    <Data>0x86f720</Data>
    <Data>0</Data>
    <Data>\Device\00000037</Data>
    <Binary>0F01040004002C0000000000990004800000000000000000000000000000000000000000000000000000022A</Binary>
    </EventData>
    </Event>
    Log Name: System
    Source: disk
    Date: 6/18/2014 5:00:59 PM
    Event ID: 153
    Task Category: None
    Level: Warning
    Keywords: Classic
    User: N/A
    Computer: pbatoon-Laptop
    Description:
    The IO operation at logical block address 0x37130c00 for Disk 0 (PDO name: \Device\00000037) was retried.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="disk" />
    <EventID Qualifiers="32772">153</EventID>
    <Level>3</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-18T21:00:59.166274000Z" />
    <EventRecordID>17215</EventRecordID>
    <Channel>System</Channel>
    <Computer>pbatoon-Laptop</Computer>
    <Security />
    </System>
    <EventData>
    <Data>\Device\Harddisk0\DR0</Data>
    <Data>0x37130c00</Data>
    <Data>0</Data>
    <Data>\Device\00000037</Data>
    <Binary>0F01040004002C00000000009900048000000000000000000000000000000000000000000000000000000228</Binary>
    </EventData>
    </Event>

  • Lenovo U310 Touch constanty freezes up

    I bought the U310 refurbished from Lenovo. I have sent this into them twice now, once to replace the mother board and once to replace the hard drive I believe. I don't understand, it will work fine for 5 minutes and than it will start freezing up and the cursor will just spin saying "so and so" not responding. I am fit to be tied and I just want this thing to work correctly. I took it to my local computer shop but if they open it than it voids the 12 month warranty so they do recommend me dealing directly with Lenovo.  Lenovo has been great about picking up all expenses including shipping but now I am starting to get beyond mad about this machine not working correctly. HELP, HELP, HELP PLEASE!
    Solved!
    Go to Solution.

    hi mattstilwell5,
    Welcome to the Forums.
    Sorry to hear about your trouble. Just to verify, is the system configured with an 500GB+24GB or 32GB SSD drive?
    If it is, then you may want to look into the following:
    1. Check if data caching is working (the mSATA SSD is used as a cache drive for frequently accessed files).
       - If the machine is using Diskeeper's Expresscache, type  eccmd -info on an elevated command prompt. It should show a result similar to this picture. 
       - If nothing happens after typing the command, open Control Panel > Programs and uninstall Expresscache. Reboot the machine and observe.
    Note:
    Uninstalling the Expresscache software will remove the data caching feature, however, you may re-install it using this guide.
    2. Run an error scan on the HDD/SSD drive (i.e. by using HD Tune) to verify its stability.
    Let me know how it goes.
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • IPhone 4s and can't connect to wifi,wifi is grayed out and says "No wifi".FREEZER TRICK WORKS!

    I have iPhone 4s wchick cannot connect on wifi,wifi is grayes out and says"No wifi",i restart my phone,i reboot it and finally i restore it the problem remains,i put it on a freezer for more than 5 minutes and works for 1-2 minutes,but when outside temperature returns on the phone still can't connect on Wifi!what to do?
    Anyone having the same problem?My iPhone 4s its not 6 months old!

    Try restoring your phone usng DFU mode. Here are steps to get DFU Mode: Open iTunes on computer. Connect iPhone to computer. (some turn off iPhone here, I do not) Hold both home and power buttons for exactly 10 seconds, release power button, keep holding home button until iPhone recognizes iPhone in Recovery Mode. Usually takes 10-20 seconds of holding the home button. If the iPhone screen is black (blank) the iPhone is in DFU Mode.

  • Lenovo N 500 Blue Screen Error

    I just purchased this laptop in February and shortly thereafter I started to get the blue screen error message.  It only happens after the screen tries to wake up from hibernation.  I have not been able to turn hibernation off.
    The system has Windows Vista Home Basic; Version 6.0; Build 6001P1
    Any help would be greatly appreciated.  I just don't know what to do and when I tried using the lenovo care, it said that the update service would not be available until May.  This is already the middle of May.
    Thank you
    Message Edited by WLove on 05-17-2009 08:03 PM

    you can see the error properly if you disable this option   
    just uncheck the option.you can get this dialog box if you go to advanced system properties 
    Its not an easy thing for me as well,you may get solution for your BSOD in micrsoft support. thats why i was asking for more info regarding your error
    Message Edited by vijaysaradhi on 05-18-2009 11:35 AM
    Message Edited by vijaysaradhi on 05-18-2009 11:36 AM
    Cheers and regards,
    • » νιנαソѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • Lenovo Yoga 13 WIFI Problem - making sense of the problem

    Hi Lenovo
    For the past 3 days i have been doing some research and observations in order to try to make sense of this wifi issue and maybe someone will come up with a solution.
    Lets start
    First of all i assume that when this laptop was being developed some form of testing was done before it was released, so the wifi must have worked well within lenovo offices.
    Also not everyone is having this issue - some people claim no problems at all, whilst others whathever they try they can't seem to be able to fix it.  Some even send their laptop for repair, other even had it replaced, yet the problem still persisted.
    So the problem seems to be related to one factor - the router people are using.
    Some people have a router that works well with this laptop, and so have no issue.
    Other have a router that is "not compatible" with the wifi card and so no matter how many lenovo yoga 13 machines they have it will still not work.
    I also noticed in my situation that when i use my android phone or tablet as wifi hotspot i have no issues, yet when i use my home router its a nightmare.
    Also i noticed that chaging the way how the laptop connects to the router can make a difference;
    1, At first i used a fixed IP with alternate configuration - this was horrible (continous disconnection, routers wifi crashing, takes ages to connect)
    2, Then i used fixed ip in the general configuration - ths was better, yet still problems (yet disconnections were less, yet still took long to connect and at times router's wifi crashed)
    3, Dynamic Ip - this is the best configuration - connects quickly, does not disconnect, yet internet connection slow and at times routers wifi crashes.
    So i think its a question of compatablity with the wifi network you are using.
    Also based on this i do not think this is a hardware issue - since hardware problems tend to be all or nothing - whilst in this case if one connects to a "compatable" router the connection is good.
    So this is a driver issue and thus if lenovo puts some effort in this - it can be fixed - yet this doesn't seem to be the case unfortunately.
    What can help from our side if everyone posts the routers and connection settings (e.g. static ip, dynamic ip etc) they are using and stating whether their wifi is working or not.
    Maybe we can close down on the problem and find a fix asap.
    Let me start with my configuration.
    Samsung galaxy s2 and samsung note 10.1 - wifi tetharing - works fine
    Belkin Pre-N router with dynamic ip and wpa2 password - problems
    Ken
    Solved!
    Go to Solution.

    I had the same problem.  I came across someon that found a fix.  My Yoga is restoring right now (I tried windows 8.1, it didnt work outwell) so I can't tell you the exact steps but it goes something like this.
    1.) right click my computer 
    2.) click properties
    3.) Device Manager
    4.) open properties of WiFi device (under network adapter)
    5.) Go to Advance
    6.) there is an option to use use either 20_40w or 20w under one of the energy/power related options in this list.
    (This is part I can't remember off the top of my head) - Turn to 20w instead of the variable rate.
    6.) Change the Bandwith option from 20_40w to 20w.
    5.) OK out till your at your desktop (might require Reboot, I dont remember) 
    That is how I kept my WiFi from destroying my Wireless networking in my house.  I was rebooting my WiFi network hourly before.

  • Lenovo Thinkpad 8 Wifi driver for Windows 10?

    I've installed Windows 10 Technical Preview on my Lenovo Thinkpad 8. It's been working pretty nicely, except for one thing: the Broadcom Wifi card driver (Broadcom BCM4324 Wireless LAN Driver). Since this doesn't work I have to use a USB antenna.
    This driver has gotten no update since the release of the Thinkpad 8! I tried running it in "Windows 8 compatibiliy mode" and that still doen't work. Does anŷone know of a possible way to make it work (either with an update, or an older driver in compatibility mode)? Any idea or suggestion (or word from Broadcom) is welcome!

    I had the same problem and installed the Win 8.1 version of the driver.
    First deinstall the microsoft driver, download the driver from http://support.lenovo.com/<xx>/<xx>/products/tablets/thinkpad-tablet-series/thinkpad-8/?tabName=Down...
    replace <xx> by your language code. eg. en (my language code was de)
    look for Broadcom BCM4324 Wireless LAN Driver for Windows 8.1 (32-bit) - ThinkPad 8 or (64-bit in case)
    Start the installer and you're done.
    strolchi

  • 4.3 upgrade issues - battery drain, unstable WiFi, freezing, wake-up lag/freeze

    I've been (also) experiencing issues since my Galaxy S3 was pushed the 4.3 update on the morning of 1/11/2014.  The worst is the battery drain - losing more than 50% of battery life within 4 hours of 100% with only minor texting during that time - with the charging process taking nearly 3 times longer to fully recharge.  The moment it's removed from the power cord, it drops to 98%.  This was not happening before update.
    Today, I called Verizon's technical support who recommended a factory restore.  Since I read endless posts/experiences of this not resolving the issues, I chose not to take that path and to work with Samsung to understand when a fix would be pushed.  After 45 minutes on the phone with Samsung explaining the issues as if they'd never heard of such problems with the update - I was told that I clearly had water damage to my battery which was causing all of my issues.  Sure, and everyone else who owns an S3 in these forums has the same water damage.  Of course, the moment I asked to speak with the Samsung rep's superior, our phone connection grew dim, sputtered as if it were a bad mobile connection, and suddenly disconnected.
    I experience the "Unstable Internet Connection" to WiFi when no other phones have issues with these networks.  They're the same networks I've always used - but since the update, they're now "unstable".
    The lag to wake up when I receive a call or text sometimes takes 10 swipes and a few freezes before it finally unlocks. 
    I've downloaded no new apps since the upgrade, yet apps I used regularly prior to the upgrade now randomly freeze on me, requiring me to remove the battery to restart the phone. 
    Unless Verizon is willing to let me out of the 2-year contract since I'm not able to use my phone in the manner to which we'd agreed in that contract, they had better start acknowledging a large-scale problem with this update and work dilligently with Samsung for a speedy resolution.  Just seems odd that this update was pulled back in November for these exact issues, yet Verizon chose to allow it to be pushed to their S3 users in January without resolution from Samsung.  Gee, wonder if it's so we'll all upgrade to the S5 as it's release is a few months off.   Hmmmm.
    http://www.sammobile.com/2013/11/18/samsung-delivers-official-statement-regarding-galaxy-s3s-android-4-3-update-issues/

    I agree, the upgrade is awful.  All I can do is complain publicly and if all of us do, maybe something will be done sooner.

Maybe you are looking for

  • AVCHD in Premiere Pro 2.0?

    Im am working since many years with Premiere Pro 2.0 an all was perfect. With my new camera, a Panasonic HC-X929, producing separate HD-file for each scene, Premiere Pro 2.0 dos'nt work. What can I do, I would'nt like to change to an other edit-softw

  • SAP MDM Adapter not picking up files in Ready folder on MDM

    Hello Experts, We are sending master data from MDM 7.1 system via PI 7.1 system to SAP ECC system. The Sydnication from MDM system is automatic and the files are being syndicated successfully from MDM system and getting dumped in the Ready folder of

  • How to configure Mail to use different ports for POP and SMTP?

    I am trying to configure Mail for my AT&T account. It requires me to configure POP (incoming) mail for port 995, and SMTP (outgoing) mail for port 465. However there doesn't seem to be an option to configure different ports for these. Is that correct

  • Universal export to Excel process

    Hello, I must write pl/sql procedure that exports data to Excel file in XML format. This procedure should be available for all pages in quite big application, so I don't want to write it by scratch for each report separately. I need more object-orien

  • Podcast Submission: error message "We had difficulties downloading episodes from your feed."

    When I try to submit a podcast into iTunes, the error message that comes up is "We had difficulties downloading episodes from your feed."  I've validated the feed. It's not a duplicate submission. Not sure what to fix, as it doesn't list a specific e