Lenovo s860 1Gb RAM not recognized by the computer,camera and gallery problem

Hi,yesterday i received a shipment of 2 phones s860. Both are installed VibeUi .20 same version. No problems with 1 of them, but other... 1.Camera can't save image.When thry to get picture,camera app close, same problem with another camera app. and after clear cashe and data on lenovo camera and gallery app, and after full wipe and full clear data with lenowo recovery menu2.tried to send video to reproduce because of the factory clip gives an error - damaged file. The received file can also not be reproduced, damaged file. When try to play with another player(km,mx) no problem,when send picture to phone with shareit - no problem3. when i turn the phone to a computer, he did not recognize, did not indicate the inclusion of a device (tried 3 different computers-no sound on computer,no device manager device-nothing) But the phone is charging, do not ask me what kind of connection I want (only charging or transfer MTP ...nothing) The animations are quite delayed .When entering in recovery menu screen is displayed bands as a problem at the video chip(It may be normal traits do not appear in other use)I have not yet tried 3G/2G slotsperhaps the software is installed by mistake and nobody has tested before sending phone to me. The problem is that I can not connect to the computer to try to reinstall again, not only reset
I enabled usb debuging from developer menuSorry for my english I hope someone understand my words up there
Phone have root,lenovo recovery menu,test menu think : 感应器校准        Sensor Calibration
自动测试            Automatic Test
单项测试            Individual Tests
测试报告            Test Report
调试测试项        Debugging Test Items
浦除e MMC        Format e-MMC
版本信息            Version Information
重启手机            Restart The Phone     (if translation who i find is good)

Its upgradable so that if you choose the 64 bit version of Windows you can do so
and take full advantage of the 4 GB. If your notebook had come pre-installed with
64 bit OS then it would have likely came with the 4 GB already and cost a bit more.
The manufacturers should be a little more clear to people who dont understand
the differences. Your machiine came with 3 GB because they, HP, knew that the 32
bit version of Windows installed would only use and see that amount.
You can leave the 4 GB in. It wont hurt a thing. If you decide to switch to the 64
bit version you will have to start from scratch on the installation. Not recommended
if your not familiar with the process.

Similar Messages

  • My ipod video is not recognized by the computer what should i do/

    my ipod video is not recognized by the computer what should i do?

    What have you tried so far in terms of troubleshooting this issue?  Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • When I was restoring my iphone4, at the end of restoring the settings an error occured and it turned off by itself and now it is not recognized by the computer or by the itunes, what to do?

    Hey guys
    When I was restoring my iphone4, at the end of restoring the settings an error occured and it turned off by itself and now it is not recognized by the computer or by the itunes, what to do?
    thanks

    A device that has been jailbroken cannot be discussed on these Communities...Apple will not help you as that voids your warranty.

  • My ipod not recognized by the computer or itunes?

    Ok, the iPod works fine playing music and watching videos and everything else it is supposed to, and it charges fine. But when i plug it up my PC to sync new music, the screen on the iPod does like normal and goes to the gray and orangeish screen that says Connected, then immediately says Disconnecting iPod and shows the little progress bar as if you had ejected it. How can it do this on it's own before anything has recognized it?
    I have done everything that the Support on here has said, the 5 r's and all that, and nothing. Checked device manager on my computer and it actually says that is is plugged up and recognized, but has a yellow exclamation point beside it. The properties of it says this error...
    "Windows cannot use this hardware device because it has been prepared for "safe removal", but it has not been removed from the computer. (Code 47)"
    These errors occurred two days again until now, i have made no recent updates on my computer or iPod to have damaged anything but these problems randomly occur. it's really odd and if someone could help me it would be great.

    Have you carefully worked through each and every suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • I have been trying to restore my ipod touch for several weeks.  It shows on the ipod the usb to itunes screen but is not recognized by the computer.  I have tried 3 different laptops and a generic usb and nothing has worked.  Would appreciated any advice

    I have been trying to restore my ipod touch for several weeks.  The ipod is on the usb-itunes screen but the computer will not recognize it.  I have tried three different laptops and am now very frustrated.  I have also tried several different usb connectors. 

    Try putting the iPod in DFU Mode vs. Recovery Mode.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • The Reader Wi-Fi is not recognized by the computer or Reader software.

    Solved!
    Go to Solution.

    When this situation occurs, the Reader™ Digital Book will not appear in the software or the software may shut down when connecting the Reader Digital Book to the computer. Follow these steps to resolve this problem:
    NOTE: Because each of these steps represents a possible solution to this problem, open the Reader software and connect the Reader Digital Book to the computer after completing each step.
    Make sure you that you are using the Reader for PC or Reader for Mac software.
    NOTE: These models are not compatible with the Reader Library software.
    When you connect your Reader Digital Book to the computer, depending on your model, do the following:
    PRS-T1: In the USB connected screen, make sure you tap the Data Transfer Mode icon so that your Reader goes into Data Transfer Mode.
    PRS-T2: In the Do you want the computer to recognize this device screen, make sure you tap Yes so that your Reader is recognized correctly.
    If the problem persists, close the software, re-open it, and then check the connection status again.
    Verify that the Reader Digital Book battery has an adequate charge.
    NOTE: If the battery is discharged, allow the battery to charge for at least one hour before attempting to connect the Reader Digital Book to the software.
    Verify that the Reader Digital Book is turned on and is not locked.
    Verify that the USB cable is properly and securely connected to the Reader Digital Book and the computer.
    NOTE: The USB cable should be connected directly to the computer. Connecting the Reader Digital Book using a USB hub or extension cable is not supported.
    Verify that the Reader Digital Book displays the USB connection indicator in the upper-right corner of the screen.
    Remove any Memory Stick® media or SD media in the Reader Digital Book.
    Disconnect any other USB Device except for your Keyboard, Mouse or Wireless USB transmitter.
    With the Reader Digital Book connected to the computer, uninstall the USB driver.
    After you uninstall the driver, disconnect and then reconnect the Reader Digital Book back to the computer, allow a few moments for the driver to reinstall and then check the status.
    If the problem still happens, turn off your Reader digital book and do a Hard Reset.
    IMPORTANT: After doing a Hard Reset, it will be necessary to authorize your unit again.
    If possible, install the Reader software on a different computer and connect the Reader Digital Book to test.
    The troubleshooting steps listed above should resolve your issue. If you have completed all of the steps and the issue is not resolved, service may be required.

  • My ipod is not recognized by the computer

    When I plug my nano into a computer my itunes dose not recognise that it is pluged in. The screan of the ipod gives me the charging symbol. I know it has a good over night charge and my other ipods hook up just fine

    This came from another thread, but worked for me.  Problem is with newest iTunes 4.62.  Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update).  Reboot, and reinstall iTunes.  It will reinstall all the other ones and you should be able to connect your nano.  Good luck.

  • Ipod froze and the USB is not recognized by the computer

    I installed the program that came with the ipod and my screen froze. i try to restart it but it is still frozen. when i try to restart it, this error message pops up: USB Device Not RecognizedOne of the USB device attached to this computer has malfunctioned and windows does not recognize it.
    Fifth generation ipod   Windows XP  

    it still doesnt work, i get the same error message

  • TS1382 I own Ipod classic.  Recently, purchased new desktop and the device is not recognized by the computer.

    Encountering problems with Windows 8 desktop recognizing Ipod

    Is the latest iTunes installed on the new computer?  You can get the latest version here
    https://www.apple.com/itunes/

  • Ipod Not Recognized By The Computer

    I have a third generation 20 gig ipod ,
    when i turn it on , i get the apple logo ,then the image of what looks to be the other side of the usb cable with an arrow pointing to the left , i tried to restore the ipod , but windows does not recognize it , i tried many other things , i could use some help , please
      Windows XP  

    I read a post earlier that someone said they'd done the same thing and had to go to an Apple shop to have the stuff returned to how it was .. not sure if that's the only way, but its an option perhaps if you are close to an Apple shop?

  • My sound is not working with the computer speakers and with headphones, help?!

    my sound is not working with my headphones or the the computer speakers

    You indicate you have a "brand new Air", you have a 14 day exchange, and the warranty of which you paid for regarding genius bar in-shop diagnostics (and repair if necessary)
    What year model Air do you have?
    On the first question,....are the headphones attached when you have your Air in sleep?
    If yes, then refrain from having phones attached when you close the monitor to prevent this until it is resolved
    resolution as to same yet, no.

  • SB (model 0220) Live 5.1 NOT RECOGNIZED by the computer (under Windows

    What do I need to do? Thanks.

    Guys: I'm new to this forum and to Creative SBO220 sound cards. I just bought an OEM card and installed it on 6/22. I had trouble with no sound until I realized that I had to go to Control Panel>Sounds and change my defaults. After that, the sound was there. Check it out.
    If you need any more help, post back.

  • "Device not recognised by the computer"

    Hi,
    I have an ipod 30 GB with Video. When I connect it to USB 2.0 of my computer I get a message "Windows cannot rcognise the device.
    My Ipod screen shows "Do not Disconnect", the time shown on the screen is frozen. I tried charging it using an adaptor charger but my ipod screen is frozen.
    I cannot scitch it on to listen to music too. It is completely frozen. Please help ???? .
    Madhu

    Hopefully this isn't the problem, but I got similar indications when I tried to use a 3rd party dock. I'd get the "Device not recognized by the computer" message and the iPod screen went to the "do not disconnect" display. It actually fried the USB port on my computer so that the PC detected things connecting but couldn't communicate properly.
    In my case the iPod thankfully survived and once unplugged was back to normal and the rest of the PC besides that USB port was ok but nothing plugged into that port behaves now.
    Used any 3rd party accessories to connect the iPod lately?
    In my case after the problems I examined the dock and discovered that the pins in the connector were actually in the wrong positions (!!!), I'm lucky I only frid a $30 part.
    (in case you're wondering the dock brand name was XtatiK)
      Windows XP Pro  

  • Unit 0ORDER_CURR for key figure 0ORDER_VAL is not recognized in the update

    Hello Experts,
    I am getting the below warning while I am installing the business content for Purchasing Cube 0PUR_C04 update Rules
    "Unit 0ORDER_CURR for key figure 0ORDER_VAL is not recognized in the update rules"
    And the business content activation is terminated.
    Can you please let me know how i could resolve.
    Thanks
    Padma

    Hi Amrit,
    Nice to know Toons suggestions have helped you to resolve your issue.
    There is one bug waiting to explode soon although.
    Check this out after your last insert
    INSERT INTO mth_equipment_shifts_d(equipment_fk_key,availability_date,shift_workday_fk_key,from_date,To_Date,line_num,availability_flag,entity_type,creation_date,last_update_date,creation_system_id,
    last_update_system_id) (
    SELECT b.entity_pk_key entity_pk_key,a.shift_date shift_date,a.shift_workday_pk_key shift_workday_fk_key,Trunc(a.shift_date) from_date,Trunc(a.shift_date) To_Date,1 line_num,'Y',
    b.entity_type entity_type,SYSDATE,SYSDATE,-1,-99999
    --INTO l_site_id,l_entity_pk_key,l_entity_name,l_entity_type,l_production_entity,
    --l_shift_workday_pk_key,l1_shift_date,l_from_date,l_to_date
    FROM mth_workday_shifts_d a ,
    SELECT plant_fk_key site_id, entity_pk_key, entity_name, entity_type, production_entity production_entity
    FROM mth.mth_equip_entities_mst
    UNION ALL
    SELECT plant_pk_key site_id, plant_pk_key entity_pk_key, plant_name entity_name, 'Site', production_site production_entity
    FROM mth.mth_plants_d
    UNION ALL
    SELECT plant_fk_key site_id, resource_pk_key entity_pk_key, resource_name entity_name, 'Resource', production_resource production_entity
    FROM mth.mth_resources_d
    UNION ALL
    SELECT plant_fk_key site_id, equipment_pk_key entity_pk_key, equipment_name entity_name, 'Equipment', production_equipment production_entity
    FROM mth.mth_equipments_d
    )b
    WHERE b.site_id = a.plant_fk_key
    AND a.plant_fk_key=l_plant_fk_key
    AND shift_date>=l_start_date
    AND shift_date<=l_end_date
    AND UPPER(a.shift_type)='BOTH'
    AND a.FROM_DATE IS NULL
    AND a .To_Date IS NULL
    --AND a.line_num=NULL
    AND a.shift_num IS NULL
    There is no COMMIT
    You may want to check that out.
    Cheers!!!
    Bhushan

  • 1GB 1st Generation iPod Nano USB Device Not Recognized on any computer

    I just recently received a free 1st generation 1GB iPod nano from a friend because they couldn't get it to work. I figured I'd take a crack at it and hopefully get a working, free iPod out of the deal...
    It already had music loaded on it (mostly a bunch of garbage), so like anyone else in my position I proceeded to reformat the little sucker and wipe its slate clean.
    Here is what happens when I try to connect the nano to ANY computer:
    Here is how the nano shows up in device manager:
    This was the original problem I was having with my desktop PC which is running Windows XP Home with SP2 and all the latest Windows updates. It is running iTunes 7.5.0.20, w/ latest iPod updater software version 1.2.3.
    Prior to testing the 1st gen. 1GB iPod nano, I had been charging and syncing my 5th generation 60GB iPod classic on my desktop PC using the same exact cable. All of my USB ports are in working, functional condition and order. I even have “Allow the computer to turn off this device to save power” unchecked under USB Root Hub Properties.
    I tried a couple different USB ports and I used another cable, no luck. So I moved on to my Fujitsu laptop running Windows Media Center Edition, all latest Windows updates, same version of iTunes and iPod software (the difference being that I DO NOT sync any iPods to it, nor do I have any music on it). SAME EXACT PROBLEM, same message bubble, same entry in device manager, and same lack of driver availability.
    Thinking maybe it’s just a “PeeCee” thing I dug out my old PowerBook G4 running the ancient Mac OS 10.2. Keep in mind this thing only has a 400 MHz G4 processor, 512MB RAM, 30GB hardrive, and USB 1.1 ports. The iPod nano wouldn’t even give a hint that it existed when I plugged it in.
    I have tried every single little Apple trick available. I’ve done the forced restart while connected and while not connected to the computer. I’ve done forced disk mode while connected and while not. I’ve run iTunes diagnostic tests on connected devices. I’ve messed with USB port settings. I’ve tried two different USB 2.0 iPod cables. I tested my dad’s 8GB 2nd generation iPod nano to see if it linked up with my desktop and my laptop IT DOES. I even tried my 60GB 5th gen iPod classic OVER AGAIN to see if it still worked, IT DOES.
    Also, this 1st gen iPod nano will not charge when hooked to the computer through USB. When I plug it in, between the time it’s plugged in and when the “USB device recognized” bubble pops up the battery icon shows it is charging, but as soon as that bubble pops up it disappears and discontinues pretending to charge.
    On my Fujitsu laptop, I uninstalled everything having to do with Apple. I uninstalled iTunes, Apple Software Update, everything. Restarting after it all of course. Then I installed the old iPod Software Updater from 6-28-2006. I was pretty sure this wouldn’t work because the iPod isn’t even recognized by the computer. In order for the iPod to work in the iPod Software Updater or iTunes it has to first be recognized at the basic Windows level. Which it isn’t…
    I have done research all across the net and the only real answer I found was that the iPod Nano’s internal USB controller is dead. I’m 99% sure it has nothing to do with my laptop, desktop, USB cables, software, or drivers. What do you guys think?

    Nope I have not figured anything out since I posted this. The closest answer I've found is that it's the internal USB controller which has gone bad. If that's the case than there is really nothing more I can do.
    I did find one opening and that was the diagnostic screen. You get to it by holding down the Menu and Center buttons, as soon as the iPod resets hold down the Left and Center buttons, the iPod will beep and then it will go to a diagnostic screen. Maybe somewhere in there you can find the problem I don't know how to use it though.

Maybe you are looking for