LENOVO S860 Poor Performanc​e in Low Signal Locations

Just bought two of this phone (2 GB RAM international model) for myself and a colleague.
I'm really pleased with the build. However, I have to say it doesn't perform well in low signal locations and this is quite worrisome as I work in a low signal location so miss most of my daily calls. Such a brilliant phone can't be flawed by the most basic and important function.
LENOVO please release an update to fix this low signal problem asap. Thanks.

Am facing this issue from last four months, Lenovo is not interested in solving this problem. My suggestion is replace this with some other brand. Even Redmi 1s (INR 6000)  has better signal compared to Lenovo s860.

Similar Messages

  • Lenovo g510 poor performanc​e

    I have bought laptop Lenovo g510 series, i want to play some games on this laptop, but i cant run them on good graphics. It is impossible to run and play some of the new games. Help me configure my laptop, please. Also the fan is making noisy all the time, even i stay on desktop with no running process. The specs of the laptop are very good  : 
    Windows 8.1 
    RAM  8 GB 
    HDD 1 TB 
    Video Intel graphics + amd radeon r5 m 200 series - 2 gb 
    CPU Intel core i5 

    Hi Immitrofanov,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing issue with poor graphics in your G510 laptop.
    Try to update the graphic driver and check for the issue.
    Click here for the driver.
    Hope this helps. Do post back if issue persists!
    Best regards,       
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Slow WiFi transmission and low signal power (Airport Extreme extended by Airport Express)

    I am experiencing slow wifi transmission between my notebooks and my base stations and I am hoping someone can help me fix it.
    My wifi configuration is the following:
    1 Airport Extreme base station (acting as router, wifi "creator" and DHCP server)
    1 Airport Express base station (connected to Airport Extreme with a LAN cable, set up to extend wireless network)
    1 Lenovo T410 notebook with Intel Centrino Ultimate N-6300 AGN WiFi antenna (I will call this one "Lenovo"), connected to wireless network, running Windows 7
    1 MacBook Pro purchased in 2009 (I will call this one "Mac"), connected to wireless network, running Mac OS X Lion
    1 QNAP T209-II NAS, connected to Airport Extreme via UTP cable
    Airport Extreme (AXTRM) is creating a 802.11n wireless network with WPA2+PSK security with MAC address filtering. The other base station, Airport Express (AXPRS) is connected to AXTRM via a UTP cable. AXPRS is set to extend my wireless network.
    My first problem is low signal power. My appartment is 90m2 in size and is in one floor. It is a new flat with high ceiling and modern layout, meaning little walls, big rooms and wide corridors. Still my notebooks, iPhones and iPad can barely reach AXTRM when I am on the other side of the flat. This was the reason why I purchased AXPRS and placed it in the middle of the appartment. My notebooks are placed just on the other side of the AXPRS's wall (less than 1 meter of distance and a simple 10cm brick wall in between), yet signal strength is only at about 80% (measured on my Lenovo using Lenovo Access Connections tool).
    My first question is: Is it normal that in a 90m2 flat with not unusual obstacles, I need 2 base stations and even then have a rather poor reception?
    My second problem is even more disturbing. I think I have catastrophic transfer speeds via wLAN. It takes over 1 hour to transfer cca. 1GB of files (average size 8MB) from my Lenovo or Mac to my QNAP. My Lenovo is showing about 250kb/s transfer rate when copying files. At the same time, Windows 7 show connection speed 144Mbps. This mean about 18MB/s. I know these numbers are theoretical and that actual transfer speeds are lower. But hey, 72 times lower? Furthermore, if I copy files from my Mac and my Lenovo at the same time, transfer speed is slightly lower. On the other hand, if I connect my notebooks to AXTRM via LAN cable and copy files to QNAP, transfer speeds are a few megabytes per second.
    To make things even more confusing for me: if I transfer files from the internet, I get download speed at about 700kb/s, which is quite in line with my internet download speed. I don't understand why transfer speeds within my local network are so much lower.
    Therefore, my second question is: How to set up my base stations and my routers to get a decent wifi connection?
    I hope someone could help me. If you need any more information, just ask. Thanks!

    From my experience of setting up the Airport WiFi for family members and friends, I have learnt the following :-
    1. Airport Express is not as good as Airport Extreme, for being as extender, the difference can be quite a lot.
    2. There is always a dead cornor (bad reception) in a house
    3. Even moving the Airport Extreme / AE a few inches, the performance can be improved quite significant
    4. If possible, always choose 5G 802.11n than 2.4G, unless there are many thick walls.
    My suggestion will be as follows :
    1. Moving out the AEBS out of a closet, is a good idea
    2. Always try to locate the AEBS in the centre of a area, instead of the two sides
    3. Try to test the AEBS without an extender, and find the best location area (don't place on the floor, neither above 6 feet height)
    4. After finding a best location, set the extender closer to the AEBS, and then moving apart from it (check the performance after every move), it is better that both devices can face each other.
    5. I can't tell you the reason, and some people may not agree with me, the new 2013 Airport Exteme performance is better and may be is a good idea to replace your Airport Express, and use it to connect with your router, and old AEBS as an extender
    6. Some Powerlinks (in case you can't use a wired ethernet connection between the two devices) work and some don't work with Apple Airport products, therefore, if possible, have an option to return them to the shop if they do not match
    Good luck

  • Very low signal with new WRT54G (V7.2) comparing with my old BEF1W1154

    I bought myself a new WRT54G router to replace my old (but good working) b-router. With the old router I have a great signal in/outdoors.
    With the new g-router I experience a low signal , even in the room were I installed the router. In other rooms or outdoors I don't have a signal at all.
    Please advice

    There are many causes for poor wireless connections, and many solutions:
    First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
    Poor wireless connections are often caused by radio interference from other 2.4 GHz devices. This includes wireless phones, wireless baby monitors, microwave ovens, wireless mice and keyboards, wireless speakers, and your neighbor's wireless network. In rare cases, Bluetooth devices can interfere. Even some 5+ GHz phones also use the 2.4 Ghz band. Unplug these devices, and see if that corrects your problem.
    In your router, try a different channel. There are 11 channels in the 2.4 GHz band. Usually channel 1, 6, or 11 works best. Check out your neighbors, and see what channel they are using. Because the channels overlap one another, try to stay at least +5 or -5 channels from your strongest neighbors. For example, if you have a strong neighbor on channel 9, try any channel 1 through 4.
    Also, try to locate the router about 4 to 6 feet above the floor, in an open area. Do not locate it behind your monitor or near other computer equipment or speakers. The antenna should be vertical.
    Also, in the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use. If your current network is not listed, enter its info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings".
    If the above does not fix your problem, download and install the latest driver for your wireless card.
    Some users have reported improved wireless performance by switching to WPA encryption.
    If you continue to have problems, try the following:
    For wireless g routers, try setting the "Transmission Rate" to 54 Mbps.
    If you still have trouble, download and install the latest firmware for your router. After a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
    Hope this helps.

  • Orig iPhone call drops & very low signal w/ latest update since 3GS release

    For those who have the original iPhone...have any of you been experiencing A LOT of dropped calls and also VERY LOW signal, like 1 & 2 bars? Not just in certain areas either but EVERYWHERE.
    After the 3GS release an update of iPhone software was released some time later for the older phones. After I updated my original iPhone to the latest software release through iTunes after the 3GS release my original iPhone now has very poor signal and a lot of dropped calls. I've visited several AT&T stores for resolution. There insufficient answer, perform a network reset. I do this several times a day and it has no positive effect. I still drop calls, some calls don't connect and extremely poor signal.
    I also noticed that the internet is working slower, both using the Edge network and the wireless in my own home.
    Moreover, I've been researching the internet and finding a lot of other people experiencing the same issues. Mostly becuase the new 3G & 3GS are media hogs eating up the resources & capacity of AT&Ts network capabilities. I've even found that there are 2 class action lawsuits against Apple & AT&T about the poor network operation, tethering limitation and Apple not allowing Google to post an app on iTunes store.
    I think the orginal iPhone updated to the latest software release from iTunes that is meant for 3G & 3GS is causing the poor performance to the original iPhone. I know dropped calls & poor signal is AT&T's responsibility but I feel that Apple has an obligation to it's customers to make sure all models, including the original iPhone, are up to par or above average performance when releasing new software, firmware & hardware. I think at this time Apple & AT&T have not completely verified and validated that the original iPhone still performs well with the 3G & 3GS updates.
    If Apple or AT&T or both don't remedy my phone network issues to prevent dropped calls and improve the very poor signal then I will be selling the iPhone and switching to a Blackberry with Verizon service. I had Verizon before and ONLY dropped calls in 2 deadspots. I could bet my life I would drop a call driving through that zone, but so does T-Mobile & AT&T. Other than that, Verizon is without a doubt the best cellular service I have had.
    Get with the program Apple & AT&T, make your customers happy and fix the network issues so original iPhone users won't leave AT&T to other services. Note, I was thinking of spending $300 and upgrading to the new 3GS but now I'm thinking of spending less and switching to a Blackberry with a more reliable cellular service, Verizon.
    So, is Apple & AT&T going to lose another valuable customer?
    P.S.
    Yes, I paid $600 for my 8GB original iPhone. Loved it til now. Geez, I'm ashamed to say Apply may have finally made a bad product that does not stand the test of time.
    Best Regards,
    Greg Light

    Please excuse some of the typos.  It's late and the browser shut down on a me a few times. 

  • Yoga 3 pro - WIFI low signal

    On a brand new Yoga 3 PRO 1370 -
    I am getting very low WIFI signal on all my routers.
    Compared side by side : Think pad yoga and yoga 3 pro - the first one have full bars on signal , the 3 pro have only 1-2 bars and disconnect all the time. 
    Only when the laptop is very close to the router -  getting full signal bars.
    Already removed and update the drivers twice . tried all configurations and power options - still very very low signal reception.
    Any ides ?

    XBrav,
    Way to go, yes I do agree with XBrav wilkster. If you can check the screen shot that XBrav provided.
    If your software and drivers doesn't match up you can check this link to download the most up to date software and drivers for your Broadcom 802.11ac Network Adapter.
    Please let us know if this can help.
    @ XBrav thanks again
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

  • WMP600N - weak connection and low signal - Windows 7 x64

    I bought the WMP600N because Linksys and Microsoft listed it as 'compatible' for Windows 7 x64.
    My experience:
    - unstable and weak connection
    - pings to websites like google.com drops, average: 1 out of 3
    - low signal, on the same spot my three years old HP-laptop with 'a build in wireless card' has full signal strength in Windows 7
    - it works well under Windows XP (32 bit)
    I'am convinced that drivers for the WMP600N are not ready for Window 7 x64. Linksys (or Ralink, which developed the chipset), please release a proper driver for the WMP600N!
    Message Edited by Storm_dutch on 12-20-2009 09:51 AM
    Message Edited by Storm_dutch on 12-20-2009 09:52 AM

    I'm not sure about you guys, but I use WMP600N and  running Windows 7 64bit without any issues. The driver that I'm using now is Driver Version: 3.0.2.0, Driver Provider: Ralink Techonolgy Corp, Driver Date: 6/19/2009. Here's what I did when I upgrded my wireless adapter. 1. Uninstall the original wireless driver from device manager. 2. Turn off the computer and phisically removed the wireless adapter from my computer. 3. Pop in the new WMP600N and turn on the computer. 4. Windows 7 then automatically detects the new adapter and intall the proper driver for it. Well, that's all I did. The whole process is very simple and straight forward.

  • New Nokia Asha 306 No Network or Low Signal Proble...

    New Nokia Asha 306 No Network or Low Signal Problem (pricing date may 31 ,2013)
    i have nokia asha 306 have signal problem when i make use sim some time show signal only two signal and show proply opreater any solution thnks in advance

    May i ask how old is your sim card? This may be a sim card you should try exchange it its over a year old and revert back ,keep in touch.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • HF R52-POOR VIDEO QUALITY IN LOW LIGHT

    HELLO,I'VE BEEN USING THE HF R52 FOR SEVERAL MONTHS NOW AND FOR THE MOST PART AM VERY HAPPY WITH IT..THE ONE ISSUE I'M HAVING IS WITH THE POOR VIDEO QUALITY IN LOW LIGHT CONDITIONS[NIGHT TIME OR INDOORS].THE RESULTS ARE "GRAINY" OR "FUZZY"..I'VE TRIED DIFFERENT SETTINGS WITH NO LUCK..WHEN I USE THE "LOW LIGHT"SETTING IT ACTUALLY SLOWS DOWN THE MOVIE LIKE ITS IN SLOW MOTION??  OUTSIDE IN THE SUNLIGHT IT LOOKS GREAT! DOES ANYBODY HAVE ANY SUGGESTIONS?? THANKS,ROB

    The videos on WCSN are Windows Media Video's...320x240...not very good in quaintly to start with. If you make these video larger on the screen they are going to degrade...sorry

  • File transfter issue - Lenovo S860

    Hello Geeks,
    I have detected one silly but quite serious issue in my lenovo S860 smartphone. Once a while I was trasfering a music file , I have chosen send via 'WhatsApp' option and marked on 'Always'. Now problem is whenever i want  to trasfter any music file, it always jump to whatsapp window without asking me file transfter options like bluetooth, wi-fi, G-mail or any other file transfer application installed in my mobile.
    This issue is occoured only while transfering music file coz i marked 'Always' with choosing 'Whatsapp' option and there is no any setting i found to let me choose another options for sending music file.
    So, please guide me for the same how to restore this setting.
    Solved!
    Go to Solution.

    Hi Chintan
    Try this: Go to Settings ->Apps->All->find WhatsApp->tap on it & "Clear defaults".
    Let me know how it goes.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Multi language rom for Lenovo S860 gapps included

    Can anybody or Lenovo make custom rom stock rom for lenovo S860 with multilanguage support and gapps included..Almost of them only support China/English only...

    Hi,
    Can you please post the instructions on how you can use the Lenovo Opensource for the K900 to build a ROM?  
    What is missing currently?

  • 12inch PB, real low signal. How to install 10.4.1 kext files?

    Noticed a problem when my girlfriend new Dell can pickup about 11 access points- all with kinda low signal but my Powerbook does not see ANY of them, once in a while it might pick one up for a second, but then it is gone.
    I know this is a documented issue with low signal. I downloaded the 10.4.1 drivers (kext files) to install thinking this might solve the issue as it has for several others. Wondering how to install these files though, there are two AppleAirPort.kext and AppleAirPort2.kext. I also want to know what files to backup should there be an issue, or I want to go back? Any help would be awesome!

    It says above 2 relevant and 1 correct answere available .............
    I'm new here so could anyone direct me to these answeres?

  • Do I need to register after purchase of lenovo s860

    Hi ,
        Do I need to register explicity after purchased of lenovo s860 through online?.
    If I want to check the product is origninal or not?
    If I want to increase the warrently what should i have to do?
    Please let us know answers for the above doubts.
    Regards,
    Harish.

    Hi,
    You need to setup SAP Router, in order to do so you have to register you sap router hostname and public ip address with sap. Once you do this you will get a distinguish name, using which you have create certificate and setup sap router.
    In order to register your credentials create a message under XX-SER-NET-NEW
    Only when your sap router is up and running SAPOSS rfc will connect to sap server.
    Regards,
    SBK

  • Where can I buy lenovo S860 with 2gb ram e 4000 mah battery

    please where can I buy lenovo S860 with 2gb ram e 4000 mah battery?
    thanx for all

    Hi
    Currently Lenovo dosen't officially sell phones in Italy.
    In questo momento Lenovo non vende (ufficialmente) telefoni in Italia.
    Saluti
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Low Signal Strneght after installing 6.0.2 update

    Hi,
    I am recieving low signal strneght after installing 6.0.2 update.Any fixes ? or anybody

    Oops I meant cellular w/o the data.
    You can try doing a reset, hold down the home/power button together until you see the apple logo and then release, then wait for the phone to boot back up.
    if that doesn't help then try - settings - general - reset - reset network settings.
    if that doesn't help, then contact your phone carrier and see if they can help.

Maybe you are looking for