Lenovo T430 - VMware Player - Windows 7 - webcam is not working

Hi,
I have Windows7 and VMware PLayer.
Webcam is working fine on my Host - it is recognized as ThinkVantage Virtual Camera.
On WMware player webcam is not recognized.
I have tried such drivers on VMware player:
g1c814ww.exe - installed - but webcam is not working
grcu07ww.exe - error message on vmware: Not Supported
Saying honestly I need such driver (make a copy from my host): ThinkVantage Virtual camera
But I need *.INF files. Unfortunately on my Host system I have found only *.SYS files for these driver.
Does anybody know how to enable Integrated camera on WMware player?
Regards
Pawel

Hi Manish,
I've done this several times with Win 7 Pro. IIRC the procedure is to not try to activate during installation. Run the full install without a key. Reboot and attempt to activate. If that fails there should be a link or phone number offered that you can call for phone activation.
Here in the US anyway the calling the number gets you an automated activation process.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Lenovo OneKey Recovery for Windows 7 64bit does not work

Does anyone have a patch or new release link for Lenovo OneKey Recovery? I recently bought a G450 and Win 7 Ultimate-64bit separately, there is no link available in the support and download page under this model yet. I tried installing the Vista 64 bit version and still does not work as well. I did a clean install downloaded the drivers from the Lenovo support page.
Solved!
Go to Solution.

You haven't provided a link to the page you are trying to download from. On top and at the right of most download pages there should be a red loud speaker next to the print page button, just click on it in order to report a faulty download or possible other problems with the page.
Is the following page the page you were trying to download from? If so you can submit direct feedback if the download doesn't work for you.
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS009179
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Microsof VX 3000 or 6000 Webcam does not work with Lync 2013 under Windows 8.1

Hi,
The problem is that i cannot use the Microsoft VX-3000 or VX-6000 with Lync 2013 under Windows 8.1.
If i go in settings under Video i can see the preview from the webcam just fine, so it works there no problem.
Wenn i try to enable my camera in a conference it does not work, i get an error: Your video cannot be started.
Now, there are no Windows 8.1 drivers for the Webcam so i installed the latest Windows 7 drivers. Because of that this webcam does not work with apps, that is fine i understand the driver problem and the way the new apps work.
But this Webcam works with skype under Windows 8.1 and it works with Lync 2010 client.
The same Webcam works just fine with Lync 2013 under Windows 7.
Is there anything i could do so that i get this Webcam to work with Lync 2013 desktop client under Windows 8.1?
Thanks

Hi,
According to your description, it may be caused by driver.
You can try to install the latest version of Display Driver to fix the display issue.
Since there is no driver for Windows 8.1, I suggest you wait for updating.
You can also post a case on Windows 8 forum, thank you for your understanding:
http://social.technet.microsoft.com/Forums/en-US/home?forum=W8ITProPreRel%2Cw81previtpro&filter=alltypes&sort=lastpostdesc
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Satellite U400 - the webcam does not work anymore

Hello guys here is my sudden probloema!
About a year ago I purchased a laptop
TOSHIBA - Satellite U400
with s.o. WinVista 32bit and with integrated webcam chicony etc. ....
For a year, everything worked correctly, but for some days now, the webcam does not work anymore.
As soon as I try to open it, a message of management software cam that says "Webcam driver open fail, please restart or computer room"
I tried to do it all: aggioronato and downloaded the drivers from toshiba, uninstalled the program and re installed the webcam ....! updated bios notebook ....! useless!
the strange thing .. well that going into device manager ... the webcam is not there ....! but if the launch seems to open just then check quell caz ... Warning!!
Gan you help me?
Graziee

Are you familiar and comfortable with LINUX LIVE bootable discs to load an alternative operating system with unobtrusive but extensive Toshiba device support so you can determine if your webcam hardware is ruined or if the problem is software and possibly solved reinstalling Windows ?
At this point, you're pondering less time consuming but more expensive choices such as buying another web cam, or another computer and you might be temporarily borrowing someone else's web cam / using a non preferred spare web cam that isn't optimal for your needs.
Continuously downloading software, registry cleaners, and repeatedly reinstalling drivers will eventually ruin your Windows installation and consume more time than you've wasted so far and still doesn't guarantee to fix your malfunction.

Satellite Pro M30 Win 7 - webcam does not work on msn messenger

Hi all
I have a Satellite Pro M30 Modell Nr.: PSM35E and have just changed to Windows 7. But the Nvidia Card NVIDIA GeForceTM FX Go5200 Grafik mit 64 MB RAM does not work properly.
I could find a driver from Vista and installed it, have Aero pics on the desktop, but my webcam does not work on msn messenger and this is the only way for me to see my family.
Can someone help me?
Thanks for your help

Hi
Im a little bit confused; do you have some problems with the graphic card or with the webcam?
I assume you are speaking about external webcam connected to the USB port? Right?
What happens if you connect the webcam to the notebook? Can Win 7 recognize the connected device? Did you install additional drivers for this webcam?
In most cases its necessary to do that because I think its not plug & play device.

My HP ENVY dv4 windows 8 camera is not working and it cannot be found on the device manager.

I am using a HP Envy dv4 on Windows 8 and trying to use the 'Cyberlink Youcam ' Webcam which is not working. When I went to find it in the device manager, it was not present. I have restarted my computer already.
Product Number: D5F96PA#AB4
Serial Number: [Personal Information Removed]
Thanks

Hi there @Eliyana
Welcome to the HP Support Forums!
I understand that your Webcam is not working and does not appear within device manager. I am happy to assist.
This document is pretty much a catchall of webcam related issues. There is a section specifically for the device not appearing in device manager. Check it out, unfortunately if it does not resolve with that then it is likely either a loose connection or fault in the device.
Webcam Troubleshooting (Windows 8)
Hopefully that will work for you. If it does require service, then you can try contacting phone support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

USB webcam microphone not working with Starcraft 2 voice chat

=USB webcam microphone not working with Starcraft 2 voice chat?Windows 7, X-fi Fatalty Pro
I have a webcam with ?a built in microphone (Ps3 eye). ?It is connected by USB. ?The drivers are the CL-Eye drivers; a third party driver set since Sony does not directly support the eye for PC.
in the windows audio device management, the microphone appears as normal and is set as the default device. ?I can use the windows sound recorder to record me speaking just fine. ?However if I use any other applications it doesn't seem to work at all. ?I can select the device as the default recording device in Starcraft 2 as well as Teamspeak 3 but no sound is detected. ?The USB microphone does not show up as a selectable device in recording options in my Creative Control Panel. ?Disabling the default creative microphone does nothing.
I think the problem is in that windows can directly detect the microphone and so software that uses the windows audio device manager works fine, but anything that talks directly with my sound card software does not properly detect the microphone. ?Basically, I can select the device as a default device but it does not work.
Any thoughts on this or am I SOL and have to find myself a shiny new headset?

I had the same problem. You need to check the device index of your USB mic.
In my case. I'm on a Mac OSX 10.6 system. I had four devices cataloged. With the last one being the USB mic.
Then set like so in your AS code audioPub.microphoneManager.micIndex = 3;
Remember, that the indexing is 0 based.
The sound framework make the assumption that the index is 0.
Hope that helps.

My webcam is not working for skype and other appli...

Hello,
My webcam is not working for skype and other applications i have used tinychat and tango..i have updated all version of skype as you said in other topics but all of them is not working for me...my device name is vimicro usb 2.0 and i have accidently deleted that device now i have installed that device again but its not working i have seen all topics please help me ...
i will be very thankful to you

Please, run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

My webcam is not work

Hi, my laptop is hp pavilion dv6 6010et, ı buy this laptop 45 days ago, two days ago my webcam is not work, ı try with cyberlink program with skype and messenger, how can ı solve this problem? Windows 7 64-bit.

It is an easy fix..... right click the cam screen (ctrl + click) click settings on the left hand tab on the bottom of the pop up settings box and take the checkmark off of enable hardware acceleration

Since downloading Yosemite Flash Player not working. Have downloaded Flash Player for Mac, but still not working. Is there a fix for this? Thanks.

Since downloading Yosemite Flash Player not working. Have downloaded Flash Player for Mac, but still not working. Is there a fix for this? Thanks.

1. System Preferences > Flash Player > Advanced > Delete All
     Press the "Delete All" button.
     Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
   Download it first.
   The next step is important.
   Click Safari in the menubar and select “Quit Safari”.
   If it doesn’t quit, Force Quit it.
   Press command + option + esc keys together at the same time. Wait.
   When Force Quit window appears, select the application if not already.
   Press Force Quit button at the bottom of the window. Wait.
   Application will quit.
    Follow the prompts and install it.
    Restart computer. Relaunch Safari.
2. Allow Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.

My webcam is not working on skype or facetime, it says cannot find.

Can someone help me figure out why my webcam is not working or able to be discovered when im using skype or facetime or at all since i downloaded Lion?

I'm never really a nick-picker about internet writing, but I couldn't even understand what you said until the third time I read it through.
Anyways, back to the subject. It may be because a lot of those websites are designed for Windows computers, and do not accept the Mac OS, just like how certain MSN Messengers designed for Apple cannot communicate with Windows computers through webcam, but can with other Apple computers.

Audigy Platinum Ex Windows 7 SPDIF IN not working

Audigy Platinum Ex Windows 7 SPDIF IN not working? I have an old Audigy Platinum Ex that has served me well, until now when I have a new Windows 7 x64 PC (RTM). SPDIF IN no longer works, though everything else does (including SPDIF OUT). I've tried the current and beta drivers for the card, and no difference.
In Windows Vista x64 I could use ASIO drivers with my M-Audio ProFire 60 while using the Audigy for PC audio. Most often this was for skype, which I would set to use SPDIF IN/OUT which I then connected to the ProFires SPDIF OUT/IN. Using the ProFire mixing tool, I could control which mics and levels went to the Audigy while not interfereing with the ASIO drivers recording the mics. The ProFire also recorded the SPDIF OUT from the Audigy to caputre the person on Skype to their own audio track. This is a podcast producer's heaven, and I miss it!
If it's a known issue (SPDIF IN / Win 7), I've had this card through 4 PC upgrades and it's served me well enough I don't mind buying new. The Creative Sound Blaster X-fi Elite Pro looks to be the current version of my Ex - are there any Windows 7 issues currently that would stop me from using it in the role above? I will miss the FireWire port, a shame they dropped that.

Well basically it is possible, and I've found this out. Apparently Dell released a driver or something that allows it to work, but then only if you install a 3rd party modified xp version of the creative suite. I don't remember where I found it, but it was through google... Using some term including x-fi, dts, and vista.... Can't seem to find it now. Anyway, it had a download for the whole creative suite that was modified from the xp version for Vista, however it was buggy as hell, caused driver issues and blue screens, and ended up causing me to have to reinstall Vista altogether again. In other words, it's possible, but I don't recommend it until it's officially supported... Don't know when this will be yet... *crosses fingers*
Luckily I've got a dual OS system with XP too, and I switch to that when I want to use my Xbox 360... However due to Microsoft also being terrible in that department... I now get entertainment off of its 3 red lights... (For those of you who don't know, 3 red lights = hardware error. Sending into microsoft for repair typically is a 2 month process... I'm still waiting on my prepaid shipping box to arri've and it's been 4 days... Will be a similar wait to get it to them, 4-6 weeks for them to actually repair, and another week or so to get it all shipped back). Although even when the console worked, my dsl modem sometimes cut out when playing on Xbox li've and dropped signals, reported errors, etc.
What is with the companies producing technology nowadays? I just want to play Gears in 5. on Xbox li've... *cries*Message Edited by Supercoolyo on 07-22-20070:54 AM

Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)

Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)
what cAN i do to make it work?please help

Hi:
If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

Bluetooth Driver In Windows 8.1 is Not Working [Model :- F0D96EA#ABV]

Bluetooth Driver In Windows 8.1 is Not Working [Model :- F0D96EA#ABV]
When I connect the phone he load and then says no connect

Hi,
Please try the following driver for "MediaTek (Ralink) Bluetooth":
http://ftp.hp.com/pub/softpaq/sp65501-66000/sp65804.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - not working for one user - working for another

Hi,
I recently have an issue with Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - NOT working for one user - working for another.
Windows 7 updates recently installed ???
By checking the device properties on the user that works - "Synaptics PS/2 Port Touchpad 13/10/2011 Version 15.3.29.0"
When the other user logs on, the touchpad works for a few seconds, then a displays a black square with a red diagonal line through it, then the touchpad won't respond. Trying to use the keypad to navigate to system diagnosics or anything to find further info is useless....

Hey eagle_no11,
Thank you for joining the HP Support Community!
I will do my best in assisting to hopefully get the TouchPad to work on the second user profile.
What I would like to start off with, is to restore the original Synaptics drivers onto the profile that is not working correctly. I have included the document Using Recovery Manager to Restore Software and Drivers (Windows 7).
Once you have installed the original drivers, you will need to complete all updates from both HP, as well as Windows. For these updates, if you open the HP Support Assistant, and select Maintain, you should see an option for updating.
Please let me know how these steps do work out for you.
Have a great day!
I worked on behalf of HP

Lenovo T430 - VMware Player - Windows 7 - webcam is not working

Similar Messages

Maybe you are looking for