Lenovo t510 can i upgrade the res from 1366x768 to 1920x1080

I have a lenovo T510 which has a maximum res of 1366x768 it has nvidia NVS 3100M graphics.Ive checked with nvidia and it says the gfx card supports 1920x1080.
If its possible could i buy a 1920x1080 lcd and fit it to this laptop without any problems.Or shall i just buy a 1366x768 lcd.
Solved!
Go to Solution.

There's something strange going on with that link. Here's what I get when I refresh it:
Panel Brand :
AUO
Panel Model :
B156HW01 V4 
Panel Type :
a-Si TFT-LCD,Panel
Panel Size :
15.6 inch
Resolution :
1920(RGB)×1080 (FHD)
Display Mode :
TN, Normally White, Transmissive
Surface :
Antiglare (Haze 42%), Hard coating (2H)
Brightness :
270 cd/m2 (Typ.)
Contrast Ratio :
400 : 1 (Typ.) (Transmissive)
Display Colors :
262K (6-bit)
Response Rime :
6/2 (Typ.)(Tr/Td) (ms)
Viewing Angle :
70/70/60/60 (Typ.)(CR≥10) (L/R/U/D)
Frequency :
60Hz 
Lamp Type :
WLED
Signal Interface :
LVDS (2 ch, 6-bit)
Input Voltage :
3.3V (Typ.)
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

  • Can You Upgrade the Processor in a Lenovo B570 Laptop?

    I've gotten all sorts of mixed answers, so I'm going to ask directly here at Lenovo: Can I upgrade my B570 from a Pentium B950 2.10GHz Dual core?And if so, what processors are compatible with my motherboard?

    I did it! I didn't think it was possible! I sucessfully upgraded my B570 from an intel core i3 2350m to a core i7 2720m. Even though one is 35 watt and the other is 45 watt, it still worked. The i7 is running hotter but nothing horribly bad.  50C to near 70 C.  I followed a take apart youtube video. It's sort of complex because the CPU is on the upper side of the motherboard. I only had 1 screw left over!! YAY!  Everything appears to be working fine. My WIFI wasn't working at first but I went back in and reset the bios to default settings and reset comptuer and bam now it's working.  The speed increase wasn't at all what I had expected.  I just upgraded my ram from 4 GB to 8 GB a few days back and that actually provided the biggest speed boost of all.   
    So it CAN be DONE as long as you get a core i3, i5, i7 series that starts with a 2*** (sandy bridge). I also used the long parts manual provided by lenovo in order to find a chip compatable with my b570 system. They list a number of chips. I bought the next to the most fastest they had listed because the price ot the BEST one just wasn't worth the cost.  
    AGAIN...it does WORK!  

  • If i got an iphone 5 and synced it with my computer, can i get the contract from my iphone 4 to a iphone 5 without upgrading the contract? (So that i will still have the same contract)

    If i got an iphone 5 and synced it with my computer,
    can i get the contract from my iphone 4 to a iphone 5 without upgrading the contract?
    (So that i will still have the same contract) (I have verizon.)

    Ask Verizon.
    You will have to activate the phone through them.

  • HT1444 how can I upgrade my macbook from 10.5.8 version to the latest version

    how can I upgrade my macbook from OS X 10.5.8 version to the latest version?

    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    Whilst Apple have withdrawn Snow Leopard from their stores, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $20 for a single user, or $30 for a family pack that covers up to 5 Macs.  You can also purchase the code to use to download Lion from the same number (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
    http://www.apple.com/osx/specs/
    If you are outside the US call your national Apple Helpline:
    http://support.apple.com/kb/HE57
    If you're in the UK, use this number: 0871 508 4400
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
    To use iCloud you have to upgrade all the way to Mountain Lion:
    http://support.apple.com/kb/HT4759

  • My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

    My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

    Hi candy, glad that you found that Shockwave Flash Object, it works with the Flash files and is very important
    The NPSWF files that you said are not there, those are for the Firefox browser or Chrome or some other browser. If you use Firefox and want the Flash Player for that, then close all of your browsers so you are only looking at your Desktop.
    Click on this Flash Player Installer for Firefox and SAVE it to your Desktop. Then RUN it from your Desktop, and after it is finished Installing, Restart your computer.
    Then Using Firefox go to the plug-ins and find a SWF vs 10.0.45.2 and make sure it is Enabled. This is just like the Shockwave Flash Object for Internet Explorer, but it is the one that works with Firefox.
    Let me know if that is what you wanted to do. If you don't use Firefox, but Chrome or another browser, then this will work for that one also.
    If you don't use another browser, then don't do any of this. I just thot maybe you did and that is why you were concerned that the NPSWF files were not there.
    Thanks,
    eidnolb

  • Hi...I have this problem, everytime I want to print something out the mac asks me for the computer password...that is really becoming annoying after. That happened since I upgraded to mountain lion. How can I stop the computer from asking me that?

    Hi...I have this problem, everytime I want to print something out the mac asks me for the computer password...that is really becoming annoying after. That happened since I upgraded to mountain lion. How can I stop the computer from asking me that?

    If you are printing via a Windows shared printer and it is the Windows user account that you are being prompted for then you can save this in the Keychain, as shown below.

  • How can I upgrade to Maverick from 10.6.8? I cannot seem to find it in the Apple Store.

    How can I upgrade to Mavericks from 10.6.8? I cannot find in in the Apple Store. Thanks.

    As of now you can upgrade to Yosemite, but not to Mavericks, at the App Store.
    Upgrading to Mavericks
    You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
    Upgrading to Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks- System Requirements
          Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.

  • Upgrading the database from Oracle 8.0.6 to Oracle 9.2.0

    Dear SDN,
    We are in the process of upgrading SAP 4.6b to 4.7 R/3 Enterprise.
    Source Release:Windows 2000/Oracle 8.0.6/SAP 4.6b
    Target Release:Windows 2000/Oracle 9.2.0/SAP R/3 4.7
    Can anyone help us in explaining the procedure for upgrading the database from Oracle 8.0.6 to Oracle 9.2.0.
    Thanks n Regards ,
    Anantha Raman E.

    Thanks Mr.Mohan
        We tried to upgrade from 8.0.6 to 8.1.7 with the help of Inst Guides from service market place..the thing is we created another oracle home with new DBSID ither than the old DBSID...when we started the migration using 8.1.7 Data migration tool its not responding after the first phase CHECKING THE OLD DATABASE...
    Pls help us in this regard
    Whether we have to migrate or what...

  • I have Quicken for mac 2005, can I upgrade to Maverick from OS X 10.6.8?

    I have Quicken for mac 2005, can I upgrade to Maverick from OS X 10.6.8 and not keep all data?

    I am new to the Apple Support community but am hopeful that you can help me!!  I have just bought a MacBook Air, migrated my stuff and found that my Quicken for Mac 2005 is no longer supported. (I still have my Quicken 2005 working on my Mac OS X - Version 10.6.8 (Snow Leopard?)  I saw a thread of communications back in 2012/13 where you helped a lot of people find ways to get their 2005 data into new versions - something about a $15 purchase.  However, I can't find those discussions again.  AND I don't know if they are 'relevant' because I'm now using the latest Yosemite, which someone just told me to upgrade for free....But this same person told me to switch to iBank, which others who have used Quicken for years didn't like.  I'd just as soon stay with Quicken but it seems like they have less support for Mac users.  Do you think I can move my data successfully still?  I live and work overseas and leave the USA on Monday and am trying to leave my older MacBook Air (the one with my 2005 Quicken on it) here....
    Thanks for any advice.

  • I've upgraded the Discoverer from release 4 to 10.2.0.3

    Hi guys,
    I've upgraded the Discoverer from release 4 to 10.2.0.3 on two of my test systems.
    the difference between the two test system is that one is SSL enable and the other one is not.
    On the test system that is not SSL enabled users can access Discoverer via EBS fine but
    on the tests system that has SSL enabled users cant so now they have to go directly to
    the Discoverer link to access it. I've logged an SR with Oracle and they told me to edit the ssl.conf file
    for the Discoverer side which I did and I placed the file directories and the locations of the certificates in that ssl.conf.
    How can I get Discoverer to through EBS when SSL is enabled.
    Thanks

    Hi,
    Firstly, you need to check that the ICX: Discoverer Launcher system profile has the correct https url to launch Discoverer.
    Rod West

  • Can I upgrade the OSX V 10.7 Lion to another operational system without risc to lose the instaled programs?

    How can I upgrade the Mac OS X 10.7.5 to better operational system?

    Back up your data, check your applications for compatibility, and try downloading Yosemite from the Mac App Store. If you get told that it's incompatible, your computer can't be upgraded past 10.7.5.
    Upgrading the OS always carries the risk of losing data that hasn't been backed up. It isn't possible to foresee all problems associated with this.
    (124264)

  • Can I upgrade to CS6 from Lightroom 4.2 or Adobe Premier Elements?

    Can I upgrade to CS6 from Lightroom 4.2 or Adobe Premier Elements . . . or both?

    I know it's a bit late to respond, but wanted to tell you what I think of Adobe's support. 
    I have bought numerous Adobe products over the years and would have expected a bit more accommodation when wanting to upgrade.  It was not that I'm unwilling to pay the princely sums you ask for your programs, but you could at least give loyal customers some consideration, say a 10% or 15% discount to "upgrade."  Well, since you don't, won't, and will not even consider it, I will never purchase another Adobe product! 
    I know I'm only a very small drop in the bucket, but I do plan to tell my friends, and they'll probably tell their friends, and so it goes.  You'll probably never even notice it, but I hope that you remember that you have got to treat your customers right and honorably, no matter how little they spend!
    LALTYA, Fay
    [email protected]
    MC900149511[1]
    “The Constitution is not an instrument for the government
    to restrain the people,it is an instrument for the people to
    restrain the government - lest it come to dominate our lives
    and interests.”
    ~Patrick Henry, 1736-1799

  • Can I upgrade to Lion from OS X 10.5.8 (Leopard)?  Do I need to install Snow Leopard first?  If so, Which version?

    Can I upgrade to Lion from OS X 10.5.8 (Leopard)?  Do I need to install Snow Leopard first?  If so, Which version?

    There are only two versions of Snow Leopard, the ordinary one and the server edition.  Most people have no need of the server edition.  Any Snow Leopard retail disc, no matter how old, even 10.6.0, can be updated to 10.6.8, so the version is pretty much irrelevant.  You need to make sure your hardware is up to scratch for Lion though - you have to have an Intel processor, Core 2 Duo or better - NOT Core Duo.

  • Can I upgrade my RAM from 4GB to 8GB for my MacBook Pro 13(early 2011 2.7GHz)? And how much would it be?

    Can I upgrade my RAM from 4GB to 8GB for my MacBook Pro 13(early 2011 2.7GHz)? And how much would it be?

    you can upgrade to 16GB if you wish to do so...
    average price for 8GB 1333MHz DDR3 is around $50 - $75 depending on the brand.
    why not spend $100 and go with 16GB 1333MHz from Crucial or Corsair.
    you can get them from Amazon.com or newegg.com
    see image below with 16GB Patriot Mac Series 1333MHz for $100.

  • Can i upgrade my iP5s from 7.0.6 direct to 7.1.2?

    can i upgrade my iP5s from 7.0.6 direct to 7.1.2?
    with all the problems i've read on 7.1.1 I and wondering if i can update directly from 7.0.6 to 7.1.2?
    anyone know if I can do this?
    7.0.6 is really stable and battery life has been good thus far.
    R

    Yes, you can.
    (108867)

Maybe you are looking for