Lenovo ThinkPad R500 gets stuck on the startup screen

Hello!
I searched for a solution but couldn't find one.
In my company we only use Thinkpads and I got an R500 wich was replaced by a newer model.
It was working (I saw it), the admin told me he would delete the bios-password. He opened BIOS->Security (did see wich password he changed) closed it and gave it to me.
Now on startup it is stuck on the startup screen saying "To interrupt normal startup, press blue ThinkVantage button", and no button does anything. I removed CMOS-Battery but still the same.
Any help appreciated
Best regard
Proton

Check USB port whether it is broken or pin is touching each other.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

  • Why does my macbook pro gets stuck in the startup screen?? its the older versiom

    its like stuck in the startup screen. i tried a few times and even took out the battery twice. please help!! i have some important document stored inside i cannot retrieve now!!!! 
    i think the operating system is like 10.7.something

    You might have a failing hard drive. If you're running 10.7.x, try booting into your Recovery partition - holding down the Command and R keys whilst booting. Once at the installatio screen, use Disk Utility to verify and, if needed, repair your hard drive. If it can be repaired, you should be good to go - if it can't be repaired then you're going to need to go shopping for a new drive.
    Clinton

  • Macbook pro gets stuck on the startup screen...

    This question is a little odd as i am typing it off of my macbook pro right now, but my macbook fell of my bed and then it froze. I then resarted it and it just sat on the start up screen with an ideling circle under the apple logo along with a loading bar at first. I let it sit for about 25 minutes and then realized that it was going to work.  I then tried to restart it in safe mood and that didnt work and i dont have the disk so i cant boot from that but then i tried this...
    Hold command S on start up and then type
    /sbin/mount -uw /
    and then
    chmod 775 /
    and then
    exit
    After that it booted up and now i am using it as previously stated but my only probelm is turned it off to see if it would come back on no problem and it doesnt i had to go through the same commands over again to get it to work.  So any suggestions on how to get it back to normal?
    Thanks

    Try resetting the Pram
    http://support.apple.com/kb/ht1379
    and Smc
    http://support.apple.com/kb/ht3964

  • My apple wont turn on.  it gets stuck on the gray screen with the spinning wheel and the apple on the screen

    My macbook air turns on but not completely, it gets stuck on the grays screen.   It shows an apple an a spinning wheel and that is as far as it gets.  sometimes I can get to an screen that shows macintosh hd and i clicked on it and the computer turned off.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
         a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.   
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • My Mac pro will not boot. it gets stuck on the grey screen.

    My Mac pro will not boot. it gets stuck on the grey screen. What can I do?

    Mac OS X: Gray screen appears during startup
    If using 10.7 or later, the Installer/Utilities DVD has been replaced with a special emergency partition on the Hard drive called "Recovery_HD"

  • Help I just get stuck with the blank screen and the white circle

    help I just get stuck with the blank screen and the white circle after i erase all content and setting
    i dont know how to do pls help.

    Try connecting the device to your iTunes library and restoring it.  If necessary place the iPod into recovery mode using the instructions in this Apple support document.
    iOS: Unable to update or restore
    B-rock

  • My iPod is stuck on the startup screen, showing just the apple logo. Has anyone had this problem before? If yes, then how did you solve it?

    My iPod is stuck on the startup screen, showing just the apple logo. Has anyone had this problem before? If yes, then how did you solve it?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Mac Pro gets stuck on the grey screen and won't finish booting

    I have a Mac Pro 1, 1 recently (successfully) upgraded to snow leopard that gets stuck on the grey screen with the spinning rainbow cursor (after the apple logo and brief blue screen) and won't finish booting up. This happened after my computer froze up and I had to force quit.  I checked out the forums and I tried all the all the suggestions (like disconnecting peripherals) and appropriate disk utilities, saw no errors with the HD reported, and had no trouble doing a safe boot  (everything works o.k. there) or starting up from the software disk to perform the repairs.  I did notice that during the repair permissions command, it gets stuck in the last few minutes, the CD starts to chug along, and everything freezes and I have to force quit.  This happens every time I try it.  I eventually backed everything up, erased the HD and reinstalled the OS, reset PRAM and NVRAM, but I'm still getting the grey screen on restart.  Tech tool deluxe reports a "fail" on the video RAM, but everything else seems to check out.  Could it be a graphics card issue?   I did notice some funky visual glitches occurring prior to the breakdown.  Any other ideas?

    I wouldn't trust Apple Disk Utility to do a hard drive repair, but I would go with TechTool Pro 5/6 if you have that instead of Disk Warrior from Alsoft.
    Clone the drive, though you should have some bootable backup clones already; repair the clone; then boot and work from that drive. Always have a working copy of the system.
    And off load all your data to other drives.

  • My macbook won't start up, it gets stuck on the blue screen. can it be fixed? i suspect a hacking due to a strange phone call earlier which i thought was a scam.

    my macbook won't start up, it gets stuck on the blue screen. can it be fixed? i suspect a hacking due to a strange phone call earlier which i thought was a scam.

    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • My Mac won´t load. When I turn it on, I type the password, then it starts to load, but nothing happens. It gets stuck on the grey screen with the apple logo. I can´t go to an Apple store since I´m working in Bolivia. Thanks

    When I turn it on, I type the password, then it starts to load, but nothing happens. It gets stuck on the grey screen with the apple logo. I can´t go to an Apple store since I´m working in Bolivia. Thanks

    RhysWills1,
    which model MacBook Pro do you have, and which version of OS X is installed on it?

  • Hi i am having a big trouble. MY mac wont start past the gray screen. I tried starting on safe boot, single user user mode , recovery mode. Everything it gets stuck on the gray screen i even tried reinstalling it , same thing what should i do?

    MY mac wont start past the gray screen. I tried starting on safe boot, single user user mode , recovery mode. Everything it gets stuck on the gray screen i even tried reinstalling it , same thing what should i do? it lets me reinstall sometimes Sometimes....  it is weird.

    orshikhfromsc,
    boot from the Mac OS X Install DVD that originally came in the box with your MacBook Pro (by holding down the C key as it starts up). When the desktop appears, select Disk Utility from the Utilities menu and erase your internal disk. After it’s been erased, reformat it. After it’s been reformatted, exit Disk Utility and reïnstall the version of Mac OS X from that DVD onto your internal disk. After that version of Mac OS X has been reïnstalled, boot from your internal disk and run Software Update to get it up-to-date within that version; that should allow you to redownload and reïnstall Mavericks, if  desired. If Mavericks is reïnstalled, run Software Update again to get it up to date.
    If you no longer have the two grey installation DVDs, you can purchase a replacement set from either Apple or iFixit.

  • I purchased a movie through iTunes and the movie gets stuck on the opening screen and will not play.  Has anybody had this happen?  And if so is there any solution?

    I purchased a movie through iTunes and the movie gets stuck on the opening screen and will not play.  Has anybody had this happen?  And if so is there any solution?

    Hey Christian,
    I'd follow the troubleshooting steps below, from this article:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    See if that resolves the issue and gets your video playing again.
    All the best,
    David

  • Have a Droid Razr M that is stuck in the reboot screen. I tried a hard reboot and a factory reset, and it still gets stuck in the reboot screen. How long should I wait for the reboot to occur until it starts back up?

    Have a Droid Razr M that is stuck in the reboot screen. I tried a hard reboot and a factory reset, and it still gets stuck in the reboot screen. How long should I wait for the reboot to occur until it starts back up? I tried the steps for a factory reset given on this site, but it still does not want to work. Any help would be greatly appreciated.

        Hello otter314!
    Let's take a look into this to see if we can figure out what happened. When did this begin? What's the software version of the device? Do you remember what was happening with the device right before this started? Please supply me with some additional information, I'm happy to help with a resolution!
    ChristinaB_VZW
    VZW Support
    Follow us on Twitter @VZWSupport

  • My macbook pro keeps getting stuck on the grey screen

    my macbook pro keeps getting stuck on the grey screen eventually im able to get it into safety mode yet i dont have the disc needed to restore or reboot it what should i do

    See Grey Screen
    https://support.apple.com/kb/TS2570
    https://discussions.apple.com/message/16276201#16276201
    You didn't mention your MBP model or OS X version. But the link above should help you.

  • Macbook getting stuck on the gray screen with the apple

    Please help!
    I had to turn off my computer this morning manually becuase it froze and when I went to turn it back on, it just gets stuck on the gray screen at the beginning. It will have the apple logo on it for a while and then switch to a "folder" with a questions mark in the middle, then to circle with a line through it and will never actually boot up. Please, any thoughts would be wonderful!

    Do you have your install discs with you? If so, insert Install Disc 1 into the optical drive and boot the computer while holding the C key. The OS X Installer should load. Choose a language to proceed. Once that window is gone, menus should appear at the top of the screen. From the Utilities menu choose *Disk Utility*. In the left-hand column, highlight your hard drive's icon--the one that lists the xx.x GB capacity/manufacturer. If you have installed Windows via BootCamp, choose the *Macintosh HD* icon. Choose the *Repair Disk* button. If anything cannot be repaired, post the error here. If nothing needs to be repaired, click the *Repair Permissions* button. Also check the *S.M.A.R.T. status* of the drive in the lower-right corner.
    Best of luck!
    ~Lyssa

Maybe you are looking for