Lenovo Thinkpad T420 trackpad and touchpad right/left click stopped working

So I have had a very... VERY... irritating problem with my Thinkpad.
For the first 6 or so months I had the laptop it worked fine. Then, the left click on the touchpad was functioning like the right click (bringing up a menu). 
I immediately disabled the touchpad and then used the trackpad right and left clicks which worked perfectly.
After another 4 or 5 months, those buttons stopped working altogether. I could still use the touchpad to move the arrow, but I couldn't click on anything.
I bought an external USB mouse and that worked fine for another 2 months. Then for a few weeks, it would work on and off. I'd have to wiggle it around in the USB ports to get the laptop to recognize it. (it had nothing to do with the ports... there were 3 of them and they all worked fine).
Then it stopped working completely, AND, my laptop refuses to acknowledge ANY USB I plug in. 
I have run out of options now. I can't even install anything, download any files from lenovo website. I can't do anything. Does anyone know if it is still salvageable? Has anyone had the same problem?
The lenovo digitizer for tablets.... would that work for this thinkpad? (sorry... not as tech savvy as the rest of you)
Thanks a bunch,
Amanda

Here was my solution to this. My left click button on both the trackpad and touch pad suddenly stopped working on me. After putting up with this for a few weeks I decided to investigate. I found if I disabled the touch pad the trackpad left click would start to work again. So I investigated by carefully popping off the left click button for touchpad. Everything looked normal, so I investigated a little father buy removing the small round blueish rubber piece in the middle of the button. Once I did this I realized it quite dirty, with a soft cloth and a toothpick I cleaned both the contacts on the PC and the the black spot on the rubber piece, putting everything back together and my left click worked once again. 
The cause of my problem was just a build up of dirt under the rubber contact which caused the button to short out and disable itself. 
I didn't have to reinstall any software or drivers. 

Similar Messages

  • CMD Space and CMD {RIGHT}/{LEFT} have stopped working as config- any ideas?

    I have CMD Space set to open Spotlight - set in Preferences/Keyboard&Mouse/Keyboard Shortcuts
    Used to work but stopped over the last couple of days.
    Also, I have set the Spaces to switch on a CMD {Right} or {Left} cursor. this has stopped too.
    Have confirmed both are set in preferences.
    Have done a reboot.
    Keys still not working.
    Any suggestions. Failing that I'll just live with it until I put SL on it.
    Ta

    Here was my solution to this. My left click button on both the trackpad and touch pad suddenly stopped working on me. After putting up with this for a few weeks I decided to investigate. I found if I disabled the touch pad the trackpad left click would start to work again. So I investigated by carefully popping off the left click button for touchpad. Everything looked normal, so I investigated a little father buy removing the small round blueish rubber piece in the middle of the button. Once I did this I realized it quite dirty, with a soft cloth and a toothpick I cleaned both the contacts on the PC and the the black spot on the rubber piece, putting everything back together and my left click worked once again. 
    The cause of my problem was just a build up of dirt under the rubber contact which caused the button to short out and disable itself. 
    I didn't have to reinstall any software or drivers. 

  • Z60M Touchpad Right/Left Click Not Working

    I'm baffled.  I can move the pointer all day long with the touchpad, but I cannot select anything by tapping nor with the left and right buttons.  According the BIOS, everything with the ultranav seems normal and active.  I cracked open the palmrest and checked the connection too... looks sat.  Additionally, the fingerprint reader is working fine.  I checked the ultranav in device manager... device appears to be working properly.  I'm running a virus scan right now to rule out any possibility of a conflict.
    The only positive outcome to this problem is I'm getting better at keyboard navigation
    If anyone has any suggestions, please reply.  Thanks in advance!

    Make sure that  the pad is not turned off.
    Are the lights on above the touchpad.???
    Sorry just noticed that you can use the touch pad.
    MY BAD.
    Let us know.
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Left click stops working after sleep

    Hi,
    I have a MBA 2013 with a magic mouse that I use when at my office desk. If I close the lid or allow my MBA to go to sleep and then take it away from my desk to another office or room (beyond the distance of bluetooth), when I open my the lid my left-click stops working. Cursor can be moved and right click works but I can't left click anything.
    If I then move back within the bluetooth range of the Magic Mouse I am also able to move the cursor and use right click, but again, the left click doesn't work on the Magic mouse either.
    This is ridiculously frustrating as I regularly pick my laptop up and leave the office/house for meetings without first disconnecting my Magic Mouse cleanly (i.e. turning the mouse off whilst the MBA is in operation).
    The ONLY solution to this issue when it happens is to reboot the MBA. This alone can take a couple of attempts as there is obviosuly no left-click so I have to manually CTRL-Q each app that stops me from rebooting (i.e. unsaved work, applications that sometimes need a force quit etc).
    I have only noticed this issue since upgrading to Mavericks. I have tried different batteries in mouse etc, but I'm assuming that this is more of a software issue than a hardware one.
    Any ideas?

    Wish I could be more help but I don't have Mavericks to experiment with.   I read a few comments by posting 'Mavericks and the Magic Mouse' into Google but there are so many references.  And nothing positive as far as I can see.   Hopefully we shall find someone else step in.

  • Spilled soda on laptop--right/left click not working

    My 2 year old spilled soda on my HP G60 laptop last night. I immediately turn off computer and turned it upside down and cleaned it up. I booted up fine later on. Everything seemed fine until I realized my right/left click was not working. I can navigate fine with the touch pad but cant click on anything. Tapping method does not work either.

    Make sure that  the pad is not turned off.
    Are the lights on above the touchpad.???
    Sorry just noticed that you can use the touch pad.
    MY BAD.
    Let us know.
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Trackpad left click stopped working...bluetooth issue?

    I have a new macbook pro 15" i7 for about 2 months, and I have a magic mouse and wireless keyboard too. Everything worked fine until yesterday, when I turned on the pc and the left click on the trackpad wouldn't work! Right click works, the cursor moves...only left click doesn't. I saw on a forum that if I turned off the computer and press optioncmd+rp when it starts it would reset PRAM and could work again, and so it did. But the next day the problem remained when I turned on the computer...just for the experience, I tried to turn off bluetooth, where my mouse and keyboard were connected, and the trackpad now fully works! Is this weird? I didn't have to turn off bluetooth for both mouse and trackpad to work... It must be some software problem, because when it first occurred me, I switched to my windows bootcamp partition and it works there!
    Sorry for the long text
    Cumps

    I had this happen to me all of a sudden on my home iMac (2007) and my work 15" MBP (2010). I think it may be related to the multitouch trackpad in some way (probably/possibly the Magic Trackpad which I have paired both with my iMac and MBP). I started seeing multiple messages like this in Console:
    20-12-2010 11:29:40 kernel AppleUSBMultitouchDriver::_deviceGetReport - DeviceRequest for reportID 0x0 returned with result 0xe000404f - retrying
    I had also seen a forum entry (don't remember where) theorizing that a USB device continually polling the bus might be filling up a buffer in some way and making the left click unresponsive.
    For me, it looks like disconnecting the Magic Trackpad and reconnecting fixed everything without having to reboot. We'll see if it stays fixed. If you aren't using a USB keyboard/trackpad, then I'm not sure what to suggest since I don't think you can disconnect the built-in trackpad via software.
    Anyway, in the mean time, keep System Preferences > Universal Access > Mouse & Trackpad > Mouse Keys accessible with the 'press the Option key 5 times' to activate option. This allows you to use the 7, 8, 9, u, o, j, k & l keys to move the cursor, and the i key to left-click. At least that way you can shut things down safely if things go haywire.
    If anyone else is having these problems, please post so we can get to the bottom of it.
    Best of luck!

  • Left click stopped working all of the sudden. Help?

    Earlier today, my MacBook Pro's trackpad button was working just fine. Now it's not. Whenver I press it, nothing happens. I can still move the cursor without a problem. I connected my Mighty Mouse to my MB Pro and everything in my MM works fine, except for the left click. Then I decided to shutdown my MB Pro and reboot it, hoping that it would get rid of the problem. After it turned back on, I realized that the left click is still not working, both on the trackpad and my MM. I even reseted my PRAM and that didn't fix my left click problem at all.
    How do I get the left click working again on BOTH my trackpad and my MM?
    Here are the specs for my MB Pro:
    - MacBook Pro with 15 inch screen (Late 2006)
    - 2.16 GHz Intel Core 2 Duo Processor
    - Running on the latest version of Lion (10.7.5)
    - 3 GB of RAM installed

    I have this problem too! I just posted a question - how did you fix it or did it just go away? Mine computer is unuseable. Left click does some things but not all.
    Here's my post
    I can open MAIL but the MAIL menu doesn't appear at the top, and the LEFT click doesn't work properly, but right click does work! Command Q doesn't close the program, it's like it's half open. I can get rid of the page with the LEFT clicker (red button) and I can sort of select stuff in an email but it's grey. The buttons along the top work (Get mail, new message etc), but if I open a new message I can't do anything with it, there's no cursor.
    Other programs the same (like Excel)
    I restarted with the buton on the back, it'll work ok for a few minutes then not so ok. I managed to copy some files onto a hard disc and that all worked fine.
    It seems to be all in the communication between the mouse/keyboard and the computer. Yes I have tried a wired mouse and keyboard, with the bluetooth one off, no help, same result.
    This is not a result of new installation. There's no half-dead mouse hiding somewhere.
    Help! Thanks

  • The keyboard and trackpad to my 2008 MacBook suddenly stopped working, what's wrong with it/ what should I do to fix it?

    The keyboard and trackpad to my 2008 MacBook suddenly stopped working. I've restarted the computer several times and no help. I had some keyboard maintenance done a few months ago at a repair shop so I don't know if that has anything to do with it. What should I do?

    First thing I would try would be to remove the battery from your MacBook, connect the computer to it's power adapter and start up, then see if the keyboard and trackpad work normally. Some older batteries have been known to expand and interfere with keyboard and trackpad. If this works, replace the battery.
    Best of luck.

  • Multi gesture and tap-to-click stopped working on Logitech touchpad

    I have a Logitech TK820 that has been working great until I did a upgrade for about one week ago. Now multi gesture stopped working completely and also tap-to-click doesnt work.
    Does anyone have any clue on what I can do to get it working again.
    Thanks

    hi,
    thanks for your reply.  i haven't had time to deal with this issue since i wrote about it in october.
    i found the 'properties' window for the touchpad mouse but there is no reset button.  i continue to have this issue and it is becoming more frequent although i have not been able to identify what triggers the sudden shut down of the tap-to-click function.
    but something new has cropped up: when the tap-to-click stops working, the next time i tap the touchpad, the pointer goes to the Start button!  this happens every time.  i don't know that anything is different?
    any further pointers (forgive the pun) would be most welcome!
    --David

  • Everytime i press and hold my left click mouse button, it automically highlights everything from that point to the top of the page

    Every time i press and hold my left click mouse button, it atomically highlights everything from that point to the top of the page. Also note, if i'm holding the left click on the scroll bar it goes back to the initial location even when i try to drag it up or down.
    Opened up internet explorer and the problem does not occur there.

    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    *In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''

  • T-400 Right Click stopped working.

    I have a Lenovo T-400 laptop Thinkpad and the right click stopping working on both keys....top one and the lower one.
    Any ideas are welcome. I had a local computer store look at it...he took it apart and cleaned the keyboard and touch pad but it still does not work.

    just those two keys ,all the other keys work? you can run a test on the keyborad from the thinkvantage toolbox
    Thinkpad R61 7733-1GU
    Thinkpad X61T 7762-54U
    Thinkpad X60T 6363-4GU
    Did a member help you today? Thank them with a Kudo!
    If a post answers your question, please mark it as an "Accepted Solution"!
    Regards,
    GMAC

  • G580 Touchpad Click stopped working

    Hi I have problem with built in touchpad on G580. It worked OK for two days then the click stopped working. I can move the mouse pointer but clicking has no effect, I tried a plug in USB mouse and that clicked OK.
    After a few days it started working again. Then after two weeks stopped again. I went for a system restore and went back a month and all was ok again - so looks like a driver issue
    Click stopped working again so I reinstalled Windows 8 Touchpad driver - didnt fix problem
    Tried to do a system restore but going bacl one day didnt fix it and attempt to restore older than that failed.
    Any ideas, really annoying
    Rob

    hi rob_s_smith,
    Welcome to the Lenovo Forums.
    Do you get the same problem if you're running in battery power?
    If you don't, and the Touchpad is working ok when it's working on the battery then the touchpad board is probably getting grounded when it's connected to the charger - see this thread as it's similar to the problem.
    If problem perist on battery and AC power then you may need to contact lenovo for service as the touchpad is showing an imminent failure.
    Hope this helps
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • 2008 Macbook pro left click not working properly after upgrading to 10.6.8

    I have a 2008 Macbook pro and a few months ago after upgrading to 10.6.8 my left click has been wonky.
    Using the trackpad the left click eventually gets "stuck" or stops responding and I have to push it multiple times before it does anything.  I have tried plugging in a mouse, but when I do so the mouse also behaves the same way.  The only way I seem to be able to get the clicking to work properly is to restart the computer with the mouse attached.
    I have seen threads about trackpads being messed up by swollen batteries, but my battery is brand new and looks fine, and the clicking problem extends to an external mouse, so I believe it is something with the preferences.
    I tried deleting  com.apple.driver.AppleBluetoothMultitouchTrackpad.plist   and restarting and the problem seemed to be fixed, but then after about a half hour it returned.
    Having to keep a mouse plugged into my macbook is driving me crazy, anyone know a solution?

    I started having the same issue after update.  I'm on a MacBookpro running 10.7.2
    ICalled apple and they did a remove battery reboot, a reload lion and a option/command/R/P reboot on startup and then the computer started working.  Two days later problem was back.  I then did a reboot and the computer was back to working.  Today the computer worked fine tell it went to sleep.  I had to do a hard reboot to get the Mac up and running and now no left click.  Please help. I can not use the Mac  with the trackpad, a mouse, a Bluetooth mouse, or a digital pad. All so signs of left mouse click not working.  One other item when you go to pick your user at startup the left mouse click works.  Help!

  • Right Click stopped working on my Magic Mouse. It works on Wife's MacBook

    I have a Mid-2011 21.5 iMac, 2.5 GHz., 12 GB Memory, Yosemite 10.10.1.
    The Right Click stopped working on my Magic Mouse. I have tried disabling and re-enabling it in System Preferences without Success. I have tried to enable the Secondary Click to 'Click on left side' just to see if I could get the secondary click to work.  All of the other functions work.
    I tested it on my Wife's MacBook and it is fully functional.
    Can anyone help?
    Thank you In advance.   

    Thank you for replying Old Toad. I was able to follow your instructions but nothing changed. My Bluetooth Mouse driver was a bit different, it include .plist
    com.apple.driver.AppleBluetoothMultitouch.mouse
    com.apple.driver.AppleHIDMouse.plist
    com.apple.driver.AppleBluetoothMultitouch.mouse.plist
    com.apple.driver.AppleHIDMouse.plist

  • My right speaker suddenly stopped working

    My right speaker suddenly stopped working. Does anybody know what could have happened or how I can fix it? Thanks!

    Just to make certain that it's not an OS setting, check in your System Preferences>Sound and make sure that your balance is set in the middle:
    If it is, and you're still having problems, you could also try resetting the SMC and the PRAM/NVRAM. If that doesn't help, it's likely a hardware problem that will have to be addressed by a trip to your local Apple Store or an AASP.
    Clinton

Maybe you are looking for

  • Adding additional sap object BUT000 in dms object link.

    Hi Experts, My requirement is adding business partner (SAP object BUT000 ) in DMS object link. BUT000 is not present as standard sap object list in object linking. I have gone through SAP documentation and understood following things. 1) Program two

  • Update of Photoshop CS 5 not possible

    Hi all, after a new installation of my Photoshop CS 5, I start an upgrade which end with following mistake: By download of these update there is a mistake. Shut the event and try it later again. This I have done without result. Please explain and man

  • Data guard - recreate primary

    hi all! I have following question: We have development database which is frequently deleted and recreated from production base. Now we will implement logical standby for this development base, where we will create some additional objects. What will h

  • HTML Content Disappearing

    We're using Groupwise 8.0.2 on SLES 10 SP3 64 bit, and are experiencing the following problem - Email sent to external recipients using Droid devices and the TouchDown (by NitroDesk) email client have no content in the message body. We can send to an

  • Macbook Pro keyboard not working correctly.

    I have upgraded through a developer account to OS X 10.8 and sometimes when i use safari or any other application the keyboard wont work, so i have to close out of the application and then re open it and if that still does not work, i have to restart