Lenovo U410 Intel SRT technology

Good day. More recently became the proud owner Ultrabook Lenovo U410 core i3. Out of the box I was a Windows 8 64-bit. Technology Intel Smart Response (hybrid drive) has not been implemented. I decided to unleash the full potential of the laptop. To do this:
1) I downloaded the OS Windows 8 64bit Single languarge
2) I downloaded the driver Raid-Array (https://downloadcent...x?DwnldID=22194)
3) Set in Bios mode Raid
4) Carry out a "clean" installation of Windows 8 (with area ssd-drive left no marked-up)
5) Install Intel Rapid Start Technology.
6) Press the "Speed" - and after a few minutes was an unknown error where you are requested to reboot a computer. and try again
Trying to turn the acceleration is the third day, spent about 5 different system settings and it did not work,
What am I doing wrong - I can not understand. Someone has such a model, and how you turned this "chip".
Another question - is it possible to simultaneously use Smart Response Technology and Rapid Start Technology?

hi razmarin,
When you installed Windows 8, did you loaded up the RAID drivers eventhough you see the HDD that are listed? (see this thread).
AFAIK, you can install both Intel Smart Response Technology and Intel Rapid Start Technology provided that the SSD can accomodate the space that it requires to run the app (Intel Smart Response uses a minimum of 18.6GB and Intel Rapid Start depends on the RAM (if you have 4GB RAM, the hibernation partition should be equal or larger than the amount of memory in the system).
Best regards,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Is LENOVO G50-80 80L0006CIN supports Intel Vertualization Technology ?

Hi All, I want to purchage ENOVO G50-80 80L0006CIN. I want to run Virtual PC through Oracle Vertual Mechine or VMWare Player to run 64 bit OS (Linux CentOS) on Windows 7 64 bit host. Is this laptop supports Intel Vertulaization (is there option to enable VT-x in BIOS)? Is LENOVO G50-80 80L0006CIN supports Intel Vertualization Technology (to run Virtual PC - 64bit guest OS on 64 bit host OS) ? Thanks,Shankar

UPDATE!!! If I select "only 802.11g" on the router I can connect.
A bit strange. I'm open to any suggestions, but at least I can connect now.

Is LENOVO G50-70 442243 supports Intel Vertualization Technology

Hi All, I want to purchage LENOVO G50-70 442243. I want to run Virtual PC through Oracle Vertual Mechine or VMWare Player to run 64 bit OS (Linux CentOS) on Windows 7 64 bit host. Is this laptop supports Intel Vertulaization (is there option to enable VT-x in BIOS)? Is LENOVO G50-70 442243 supports Intel Vertualization Technology (to run Virtual PC - 64bit guest OS on 64 bit host OS) ? Thanks,Shankar

Yes I am sure. For example something that happens always is get stuck when I have oppened: Android Studio - programming platform - , itunes and google chrome. I thought that It is mistake of my laptop but as I read in other threads is a common and unsolvable till now problem.

Lenovo G510 Intel(R) Virtualization Technology

hi.
i have a g510, intel 4700 mq corei7
i enabled Intel Virtual Technology under the Configuration Tab.
after that in windows 8.1 :
run Intel(R) Processor Identification Utility
>>>>>it shows Intel(R) Virtualization Technology: No<<<<
what is the problem?????
how can i solve it??????????

Hi,
A couple of things that can cause that to happen: on most machines, it's necessary to fully cycle power (shut down, power up) after changing the VT setting in BIOS. Also, having Hyper-V enabled in Windows Features can hide the VT status.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Lenovo U410 SDD Fails

Hi,
I have a Lenovo U410 laptop with windows 8.1.
First the boot of my system was really slow (taking like 15 mins)! So I checked the forum and deinstalled expresscache and now it works faster. So I thought I'll setup Intel Rapid Start Technology, for that you have to set something in the BIOS from AHCI to RAID. When I did that my PC wouldn't boot anymore, so I changed it back.
For some reason HD Tune can't find my SSD. When I check with Windows for any errors on the ssd it says everything is fine. However, I have the feeling the SSD is useless at the moment. Can you please help me.
Thank you very much in advance.

I reinstalled a fresh copy of Windows 8.1, no changes. It still takes a hell of a time to boot up. Even flashed new bios..
Don't know how to go from here, but I think the problem is not windows, because that works fine. It's got something to do with the boot, but can't figure out what..? Please help

Lenovo U410 - 32GB SSD Failed

I have been running my Lenovo U410 great for a few months, but recently the 32GB SSD gave out. It isn't detected anymore and it gives me the Intel Rapid Start Technology is disabled error everytime Windows is booted. My warranty only has a few months left, but I'm in no shape to be laptopless. Also, replacing the 32GB SSD by myself voids warranty as there are Lenovo stickers on the screws to open up the back panel. I don't have many options, any suggestions what I could do? Also, is there any way to make my U410 run off completely the HDD so I can use "Sleep" when I close the lid. If it's running on "Sleep", the laptop goes to a black screen which is caused by my SSD problem. This is a VERY big problem with U310/U410 owners, but there hasn't be a consensus on a solution.

hi Telstra,
Thanks for Posting!
I believe the SSD is only mounted for Caching.
The system could technically run without it.
If you are to replace the SSD
Open Control Panel and Uninstall the Intel Rapid Start and the Expresscache Software.
then Replace your SSD.
Once Installed run the Install the Espress cache software from Lenovo Website.
It should work.
The Warranty is valid even if you replace a part.
Only damages during the process of replacing are not.
You can refer to the system's Maintenance Manual for Disassembly.
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Oracle VM VirtualBox need~ VT-x /Intel Virtulization Technology missing in BIOS?

My laptop is lenovo S440,which is running Intel® Core™ i5-4200U Processor.
I checked that Intel official website,the processor support Intel® Virtualization Technology (VT-x).
However,by the time I running Oracle VM VirtualBOX,it prompt that
"VT-x/AMD-V hardware acceleration is not available on your system. Certain guests (e.g. OS/2 and QNX) require this feature and will fail to boot without it."
I try to enable it at BIOS ~Config>CPU,however I can't see option of Intel® Virtualization Technology (VT-x). to be select,so I have no way to enable/disable it.
Am I go to the correct path to do the configuration at BIOS?

Hello and welcome,
Have you also looked under BIOS->Security->Virtualization?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Lenovo U410 - HDD died

I have a Lenovo U410. The HDD is dying. I want to replace it with an SSD. Here are the problems:
1 - I try to enable BIOS and save my changes? When I boot up again? nothing.
2 - I replaced the HDD with an SSD - black screen.
3 - I cannot access BIOS, and when I install the BIOS update? it still doesn't work.
4 - I am at my end and about to throw this thing into the trash.
Any help?
Stats:
Lenovo U410
CPU - Intel i7
Windows 8
Ram - 8gigs
MSATA - 32GB
HDD - 1TB
New HD - Samsung EVO 120gb

Hi drei01,
Is your flash drive set up for UEFI booting? If not remove your old hard drive and the Msata and try to follow the procedures in this thread:
http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/Lenovo-IdeaPad-U410-StartUp-Issue/m-p/16380...
Please don't go over a three day bump, it pushes new posters back, the bumps will be removed. I get notifications on these threads, I just got back from work, that's why the delay. We'll try to get you through this.
Regards,
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Enable Intel Virtual Technology - G450

Hello everyone,
Greetings!
I bought Lenovo G450. Originally the OS is Windows Vista I reformat it and install Windows 7 Ultimate. I want to enable the Virtualization Technology cause I want to install the Windows XP mode in my Windows 7 Ultimate OS. but when I go to BIOS i cant see the VT features from the BIOS. Is Lenovo G450 supported VT technology features?
Below is my BIOS information.
Product Name: Lenovo G450
BIOS Version: 18CN29WW(V2.02)
E.C Version: 18EC24WW(V2.00)
UUID Number: 19226D6A789011DE962E00262204091F
CPU Type: Intel(R) Core(TM) 2 DUO CPU T6600
CPU Speed: 2.20 Ghz
Total Memory: 4096 MB
Any comment/suggestion is highly appriciated. Thank you
Regards,
Andrian

I can't see any VT option from the BIOS. it means the Lenovo G450 is not supported for Virtual Techonolgy? How come, this Lenovo G450 is a new model in the market right. but why not include this VT features?
     If the BIOS doesn't show it, then it can't run it, you're right there.   I have read on other forums where people have crafted BIOS revisions to allow some computers to run VT (when the BIOS is the only reason VT is impossible).    There are lots of new models that exclude VT by design, you are not the only one complaining.
    On March 18 Microsoft announced:
     Windows XP Mode no longer requires hardware virtualization technology. This change simplifies the experience by making virtualization more accessible to many more PCs for small and midsize businesses wanting to migrate to Windows 7 Professional or higher editions, while still running Windows XP-based productivity applications.
    Some of Microsoft's pages do not reflect this change & will give users the impression that hardware virtualization is necessary to run Win XP Mode on Win 7.   I believe there is an extra bit of Microsoft software you must download if hardware virtualization isn't possible on your Win 7 machine, to enable the other Win XP Mode software to run.    XP Mode has some other requirements even though the requirement for hardware virtualization has been dropped.
    Supposedly XP Mode runs slower on machines without hardware virtualization.

P67A-G43 Intel SRT (Accelerate Missing)

I have a P67-G43 configured with two 500GB mechanical drives in RAID1.
I added a 64GB Crucial M4 SSD to use the SRT feature to accelerate the RAID1 configuration.
This is supposed to be possible and supposed to work quite well.
However, "Accelerate" does not show up under the Intel Rapid Store Technology application.
I've formatted the SSD. I've updated BIOS, I've update RST software.
Has anyone gotten this to work? Others have...
http://superuser.com/questions/362022/intel-srt-rst-gives-no-boot-device-error-after-two-reboots

Believe you need a Z68 chipset based mainboard for it to work;
http://www.intel.com/support/chipsets/sb/CS-032826.htm
System requirements:
Intel® Z68 Express Chipset-based desktop board
Intel® Core™ Processor in the LGA 1155 package
System BIOS with SATA mode set to RAID
Intel Rapid Storage Technology software 10.5 version release or later
Single hard disk drive or multiple drives in a single RAID volume
Solid State Drive (SSD) with a minimum capacity of 18.6GB
Operating system: Microsoft Windows* Vista 32-bit Edition and 64-bit Edition, Microsoft Windows* 7 32-bit Edition and 64-bit

Need help booting from usb on Lenovo U410

I have burned a .iso file on a usb stick, and now i want to to boot my laptop from the usb.
I shutdow the computer and a pressed the NOVO button on the side start the cmmputer to give me the menu
under the BIOS setup and the BOOT tab, i am confused to which step to priorritize to boot from the usb. i have the following:
1.ATA HDD: ST9...
2. ATA SSD1: SANDISK SSD U100 24GB
3.RAID DEVICE 2
4. RAID DEVISE 1
5. ATAPI CD:
6.USB HDD: GENERIC USB HDD
7.USB FDD
8.USB CD
9.PCI LAN: EFI NETWORK IPV4
10. PCI LAN : EFI NEWTOWORK IPV6
i obvisouly tried putting anything with the word "USB" to the top but still my lenovo u410 dosent boot from the usb..
Any help please?
Solved!
Go to Solution.

hi Moh27,
Thanks for Using Lenovo community Forums!
Inside BIOS under boot tab you will find there UEFI Boot you will need to disable that
then u need to move the USB HDD: GENERIC USB HDD to number 1.
You can do that by highlighting the USB HDD: GENERIC USB HDD and pressing F5 or F6 to move it up
-or-
Highlight the things on top of the USB HDD: GENERIC USB HDD then put them down still using the F5 or F6 to move them down, do it one by one till the USB HDD is on top.
Just make once you got the USB HDD: GENERIC USB HDD to 1 hit F10 to save and exit changes.
Hope this helps,
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Intel Virtualization Technology in the MacBook?

I know several people have posted here that they have had success running Parallel's virtualization software. I was wondering if this implies that the MacBook contains the Intel Virtualization Technology (VT) chipset that purported to be in the iMac and MacBook Pro?
Article about MBP's chipset:
http://www.macnn.com/articles/06/04/06/parallels.workstation.21/
Wikipedia about Virtualization Technology (VT):
http://en.wikipedia.org/wiki/Virtualization_Technology
iMac G5 2.0 GHz, 20 Mac OS X (10.4)

Yes, the MacBook can utilize the same technologies that are built into its Core Duo processor just like the iMac and MacBook Pro's Core Duo processor.

Lenovo U410 (HDMI) to Thunderbolt

Hi,
Can i connect my Lenovo u410 (HDMI) to a 27" Apple Thunderbolt monitor?
If yes, how?
Here at work there are a lot of 27" screens eating dust.
Many thanks.

It could be that the adapter has failed. That sounds like the most likely cause of your problem.

Lenovo U410 8.1 Audio Issues

I have owned the Lenovo U410 Ideapad for a decent while now and I have been consitently satisfied with its preformance. Recently I uprgraded to Windows 8.1 and it does not play any sound from any source. After some searching I found the software to fix it.
The "Conexant Audio Driver for Windows 8.1 (32-bit, 64-bit) â“ IdeaPad U310, U310 touch, U410,"
So of course I downloaded it, but the problem persists where sound does occur, with every 1/7 videos on Youtube, or sound lasts for moments but nothing is consistent.
Any solutions? It would be immensly appreciated.
Solved!
Go to Solution.

hi Squeaking_Lemur,
Welcome to Lenovo Community Forums!
Is the issue happening on local mp3 files(audio saved on your pc and not through the internet)?
Try opening Device Manager and open Sound, video, and game controllers Uninstall the conexant entry there and restart your system see if that will work.
If still non try this again
Conexant Audio Driver
Let me know your findings
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Lenovo U410 - Win8 / Unable to access OS + BIOS on statup

Hi Guys,
I hope that someone can provide some assitance for me please?
About 1 week ago, I was using my Lenovo U410 ultrabook without any issues when I decided to power off as normal. I did this but it wouldn't power off automatically, as the screen would go blank but the power light would remain on but continue running. I left it for about 30 minutes before deciding to force shutdown by holding down the power button.
Then when turning the laptop back on, it would normally take about 10 seconds to reach the login screen but now it was taking about 2 minutes. Eventually it would get to the login screen and I could login normally.
I tried to find some solutions to this but all that was recommended was to make sure I had the latest updates and run a virus scan. I did all the above and everything seem to indicate that it was all updated and no virus/malware detected.
NOW, however after powering down my laptop about 3 days ago, when I boot up I recieve a blue error screen advising the following:
Recovery
Your PC needs to be repaired
A required deivce isn't connected or can't be accessed.
Error code: 0xc000000f
You'll need to use the recovery tools on your installation media. If you don't have any installtion media (like a disc or USB device), contact your system administrator or PC manufacturer.
This error provides me with options to go to the Statup options (F8), the UEFI Firmware option (Esc) or Start normally (Enter)
Whatever option I select I just get brought back to the above error message. Even when I power up using the Novo button, I get the 4 options or Normal startup, Bios, Boot Menu and System Recovery but each option brings me back to the above error screen.
I don't have any disc or media as nothing came with the laptop, all OEM, and I have no idea what to do?
Any suggestions will be very welcome as I'm at road block and not sure how to go about fixing this?

Hi
I think that it's the case of bad hdd or else the hdd is not connected properly in the port. So i suggest you contact support if you are under warranty.
Regards
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

Lenovo U410 Intel SRT technology

Similar Messages

Maybe you are looking for