Lenovo U410 Touchpad

Hi,
a few weeks ago i bought a new U410. Now ive got some big issus whit this **bleep** touchpad.
Everytime i boot the touchpad doenst work. Sometimes the keyboard doenst work. I cant figure out why. Same problem if i push the "sleep-button" (left corner) or close the laptop.
I'm running WIN7 64 bit home prem
I tried the following steps:
1.) Update the drivers
2.) Reinstall the complete system
3.) delete the drivers and the hardware (device manager)
4.) Configure the Energy-Settings
I dont know what to do. Nothing works. Do ou have some helpfull hints?
Thanks!

There is one. But initial factory backup is deleted. By the way if you want you could have a look here for how to make factory default by yourself.
http://forums.lenovo.com/t5/IdeaPad-Y-U-V-and-Z-series/Making-Factory-Default-HDD-Read-this-could-be...
For any queries write them on that thread.
Thank you
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

Similar Messages

  • Need help booting from usb on Lenovo U410

    I have burned a .iso file on a usb stick, and now i want to to boot my laptop from the usb.
    I shutdow the computer and a pressed the NOVO button on the side  start the cmmputer to give me the menu
    under the BIOS setup and the BOOT tab, i am confused to which step to priorritize to boot from the usb. i have the following:
    1.ATA HDD: ST9...
    2. ATA SSD1: SANDISK SSD U100 24GB
    3.RAID DEVICE 2
    4. RAID DEVISE 1
    5. ATAPI CD:
    6.USB HDD: GENERIC USB HDD
    7.USB FDD
    8.USB CD
    9.PCI LAN: EFI NETWORK IPV4
    10. PCI LAN : EFI NEWTOWORK IPV6
    i obvisouly tried putting anything with the word "USB" to the top but still my lenovo u410 dosent boot from the usb..
    Any help please?
    Solved!
    Go to Solution.

    hi Moh27,
        Thanks for Using Lenovo community Forums!
    Inside BIOS under boot tab you will find there UEFI Boot you will need to disable that
    then u need to move the USB HDD: GENERIC USB HDD to number 1.
    You can do that by highlighting the USB HDD: GENERIC USB HDD and pressing F5 or F6 to move it up
    -or-
    Highlight the things on top of the USB HDD: GENERIC USB HDD then put them down still using the F5 or F6 to move them down, do it one by one till the USB HDD is on top.
    Just make once you got the USB HDD: GENERIC USB HDD to 1 hit F10 to save and exit changes.
    Hope this helps,
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo U410 (HDMI) to Thunderbolt

    Hi,
    Can i connect my Lenovo u410 (HDMI) to a 27" Apple Thunderbolt monitor?
    If yes, how? 
    Here at work there are a lot of 27" screens eating dust.
    Many thanks.

    It could be that the adapter has failed.  That sounds like the most likely cause of your problem.

  • Lenovo U410 8.1 Audio Issues

    I have owned the Lenovo U410 Ideapad for a decent while now and I have been consitently satisfied with its preformance. Recently I uprgraded to Windows 8.1 and it does not play any sound from any source. After some searching I found the software to fix it. 
    The "Conexant Audio Driver for Windows 8.1 (32-bit, 64-bit) – IdeaPad U310, U310 touch, U410," 
    So of course I downloaded it, but the problem persists where sound does occur, with every 1/7 videos on Youtube, or sound lasts for moments but nothing is consistent. 
    Any solutions? It would be immensly appreciated. 
    Solved!
    Go to Solution.

    hi Squeaking_Lemur,
    Welcome to Lenovo Community Forums!
    Is the issue happening on local mp3 files(audio saved on your pc and not through the internet)?
    Try opening Device Manager and open Sound, video, and game controllers Uninstall the conexant entry there and restart your system see if that will work.
    If still non try this again 
     Conexant Audio Driver   
    Let me know your findings
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo U410 SDD Fails

    Hi,
    I have a Lenovo U410 laptop with windows 8.1.
    First the boot of my system was really slow (taking like 15 mins)! So I checked the forum and deinstalled expresscache and now it works faster. So I thought I'll setup Intel Rapid Start Technology, for that you have to set something in the BIOS from AHCI to RAID. When I did that my PC wouldn't boot anymore, so I changed it back.
    For some reason HD Tune can't find my SSD. When I check with Windows for any errors on the ssd it says everything is fine. However, I have the feeling the SSD is useless at the moment. Can you please help me.
    Thank you very much in advance.

    I reinstalled a fresh copy of Windows 8.1, no changes. It still takes a hell of a time to boot up. Even flashed new bios..
    Don't know how to go from here, but I think the problem is not windows, because that works fine. It's got something to do with the boot, but can't figure out what..? Please help

  • Lenovo U410 - 32GB SSD Failed

    I have been running my Lenovo U410 great for a few months, but recently the 32GB SSD gave out. It isn't detected anymore and it gives me the Intel Rapid Start Technology is disabled error everytime Windows is booted. My warranty only has a few months left, but I'm in no shape to be laptopless. Also, replacing the 32GB SSD by myself voids warranty as there are Lenovo stickers on the screws to open up the back panel. I don't have many options, any suggestions what I could do? Also, is there any way to make my U410 run off completely the HDD so I can use "Sleep" when I close the lid. If it's running on "Sleep", the laptop goes to a black screen which is caused by my SSD problem. This is a VERY big problem with U310/U410 owners, but there hasn't be a consensus on a solution. 

    hi Telstra,
    Thanks for Posting!
    I believe the SSD is only mounted for Caching.
        The system could technically run without it.
    If you are to replace the SSD
               Open Control Panel and Uninstall the Intel Rapid Start and the Expresscache Software.
                       then Replace your SSD.
                   Once Installed run the Install the Espress cache software from Lenovo Website.
    It should work.
    The Warranty is valid even if you replace a part.
                  Only damages during the process of replacing are not.
    You can refer to the system's Maintenance Manual for Disassembly.
    Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo U410 Intel SRT technology

    Good day. More recently became the proud owner Ultrabook Lenovo U410 core i3. Out of the box I was a Windows 8 64-bit. Technology Intel Smart Response (hybrid drive) has not been implemented. I decided to unleash the full potential of the laptop. To do this:
    1) I downloaded the OS Windows 8 64bit Single languarge
    2) I downloaded the driver Raid-Array (https://downloadcent...x?DwnldID=22194)
    3) Set in Bios mode Raid
    4) Carry out a "clean" installation of Windows 8 (with area ssd-drive left no marked-up)
    5) Install Intel Rapid Start Technology.
    6) Press the "Speed" - and after a few minutes was an unknown error where you are requested to reboot a computer. and try again
    Trying to turn the acceleration is the third day, spent about 5 different system settings and it did not work,
    What am I doing wrong - I can not understand. Someone has such a model, and how you turned this "chip".
    Another question - is it possible to simultaneously use Smart Response Technology and Rapid Start Technology?

    hi razmarin,
    When you installed Windows 8, did you loaded up the RAID drivers eventhough you see the HDD that are listed? (see this thread).
    AFAIK, you can install both Intel Smart Response Technology and Intel Rapid Start Technology provided that the SSD can accomodate the space that it requires to run the app (Intel Smart Response uses a minimum of 18.6GB and Intel Rapid Start depends on the RAM (if you have 4GB RAM, the hibernation partition should be equal or larger than the amount of memory in the system).
    Best regards,
    neokenchi
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo U410 - Win8 / Unable to access OS + BIOS on statup

    Hi Guys,
    I hope that someone can provide some assitance for me please? 
    About 1 week ago, I was using my Lenovo U410 ultrabook without any issues when I decided to power off as normal. I did this but it wouldn't power off automatically, as the screen would go blank but the power light would remain on but continue running. I left it for about 30 minutes before deciding to force shutdown by holding down the power button.
    Then when turning the laptop back on, it would normally take about 10 seconds to reach the login screen but now it was taking about 2 minutes. Eventually it would get to the login screen and I could login normally. 
    I tried to find some solutions to this but all that was recommended was to make sure I had the latest updates and run a virus scan. I did all the above and everything seem to indicate that it was all updated and no virus/malware detected. 
    NOW, however after powering down my laptop about 3 days ago, when I boot up I recieve a blue error screen advising the following:
    Recovery
    Your PC needs to be repaired
    A required deivce isn't connected or can't be accessed.
    Error code: 0xc000000f
    You'll need to use the recovery tools on your installation media. If you don't have any installtion media (like a disc or USB device), contact your system administrator or PC manufacturer.
    This error provides me with options to go to the Statup options (F8), the UEFI Firmware option (Esc) or Start normally (Enter)
    Whatever option I select I just get brought back to the above error message. Even when I power up using the Novo button, I get the 4 options or Normal startup, Bios, Boot Menu and System Recovery but each option brings me back to the above error screen.
    I don't have any disc or media as nothing came with the laptop, all OEM, and I have no idea what to do? 
    Any suggestions will be very welcome as I'm at road block and not sure how to go about fixing this?

    Hi
    I think that it's the case of bad hdd or else the hdd is not connected properly in the port. So i suggest you contact support if you are under warranty.
    Regards
    Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
    If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

  • Lenovo U410 microphone not working

    My Lenovo U410 microphone(Conexant SmartAudio HD)  isn't working. I tried a number of things from various posts but hard luck. I checked that its configured correctly. The OS is Windows 7. Could somebody help me with steps to check if its an hardware problem. Thanks.

    hi gvirmani,
    Welcome to the Lenovo Forums.
    Just to verify, have you tried to record and playback your voice using the built-in Sound Recorder?
    If the microphone levels fluctuates but you're not able to hear anything when you try to playback the recording then there's most likely a defect in the microphone and you may need to contact Lenovo for service.
    Alternatively, you can try using a USB headset w/ mic or a USB camera w/ mic as a temporary replacement.
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo U410 - HDD died

    I have a Lenovo U410.  The HDD is dying.  I want to replace it with an SSD.  Here are the problems:
    1 - I try to enable BIOS and save my changes? When I boot up again? nothing.
    2 - I replaced the HDD with an SSD - black screen.
    3 - I cannot access BIOS, and when I install the BIOS update? it still doesn't work.
    4 - I am at my end and about to throw this thing into the trash.
    Any help?
    Stats:
    Lenovo U410
    CPU - Intel i7
    Windows 8
    Ram - 8gigs
    MSATA - 32GB
    HDD - 1TB
    New HD - Samsung EVO 120gb

    Hi drei01,
    Is your flash drive set up for UEFI booting?  If not remove your old hard drive and the Msata and try to follow the procedures in this thread:
    http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/Lenovo-IdeaPad-U410-StartUp-Issue/m-p/16380...
    Please don't go over a three day bump, it pushes new posters back, the bumps will be removed.  I get notifications on these threads, I just got back from work, that's why the delay.  We'll try to get you through this.
    Regards,
    Dave 
    T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    If someone helped you today, pay it forward. Help Someone Else!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Lenovo U410 Touch Drivers

    Dear All, Can somebody please please send me the zipped copy of d drive data of Lenovo u410 touch model? I beleive it contains drivers and application folder.
    I mistakenly deleted that .. Please help me.
    Thanks

    Hey!
    Sorry for not posting back, uni got very hectic very quickly.
    Didn't have any luck rolling back unfortunately. Had to return it in the end because I was eternally ethernet bound. Sad times but Amazon were fast as hell at refunding me. It's a shame because it's a smashing little laptop, gaming on it was actually pretty **bleep** good.
    I heard somewhere that if you open your laptop up and swap the aerial cables around on the WiFi adapter that fixes it but I have no idea whether that source can be trusted or is correct. If you're still in warranty I'd say you're best returning it. (I ended up getting a 17" HP Envy with a tasty i5 and 2GB GT740M off eBay refurbished for £513 delivered)
    If you end up shopping for another laptop and you live in the UK I recommend going on eBay and checking out the laptops from America, for some reason they are waaaaaaay cheaper than laptops in the UK. My current laptop cost £980 in John Lewis new: I think I can put up with the US keyboard layout for £470!
    Sorry I did't have any better news!

  • Lenovo U410 hard drive noise

    Hi,
    I hear constant and noticeble noise from my Lenovo U410. I think it is from the hard drive.  I have this laptop for almost 2 years. I do not have power saving mode on.  Any suggestion on fixing the noise problme?
    Thanks!!

    Hello again,
    Please see my reply to your other posting on the same topic..........
    https://forums.lenovo.com/t5/Lenovo-U-and-S-Series-Notebooks/Clicking-Noise-from-hard-drive-U410/td-...
    Owner & Operator of the following:
    ● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
    ● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
    ★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
    ★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
    ★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
    ★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

  • Lenovo U410 Touch "Machine type"

    I want to know what "machine type" number Lenovo U410 Touch have. Anybody knows? I know it's 4376 for normal U410, but I don't know one for U410 Touch...

    hi krabar,
    According to this pdf data sheet, the Lenovo U410 Touch has these model-part numbers (this can be considered as the machine type number):
    Hope this helps
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo U410 Battery Sudden Drop to 0%

    Hi guys n girls,
    I just got Lenovo U410 Windows 8 in February 2013. This afternoon when i was using the laptop in power saver mode, I was able to use an hour from 60% to 48%. After checking the battery percentage when it was at 48%, 5 minutes later the low battery warning showed up saying the laptop has 6% left, then it shut down itself.
    Following are the situations:
    I seldom use it and I left it for 1 week plus, and two days ago I used it for 15 minutes, and then I took it out n used it today.
    I used it in power saver mode.
    I was running the windows update.
    Steam was on for updating.
    I was running open office.
    Is this normal ? Does this happen to others ? IS there a way to solve this ?
    Thanks
    Solved!
    Go to Solution.

    hi evanicle,
    Upon checking the Lenovo Energy Management, the battery gauge can be found in this location (see spoiler)
    Spoiler (Highlight to read)
    Is this what you see?
    Hope this helps
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo u410 won't work. Boot menu/App menu pops up

    So when I turn on my lenovo u410 laptop I get this menu box up as seen below in a black background. I've played around with the menu and I get nothing. This has been happening for the past few days and usually it manages to get past this and start up normally. However today is the day it's decided to stay put and I have no idea what to do. This is very frustrating as I only bought the laptop less then 2 months ago. Please help!
     It's windows 8 btw

    Hi N_A,
    Thanks for posting and welcome to the Lenovo Community,
    I’d like to guide you in a way to try to set the HDD (Hard Disk Drive) inside the BIOS to be the first priority booting order so we will try to return the BIOS to factory default settings:
    Step1: Please turn off the machine and then at the left side you can see the NOVO button which is the button with the curve arrow
    Step2: Press on the NOVO button and then you will get option press on BIOS Setup
    Step3: Please press on FN+F9 together and then press Enter on Yes option and then FN+F10 to save and exit and then press Enter
    Hope the information helps. Let us know.
    Regards
    Soha
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for

  • Is there a way to password protect a list on iPad 1

    Is there a way to create a list on the ipad and password protect it?

  • AME CS4 darkens h.264 video files after export

    Finding something really weird happening.  Whenever I am exporting a file through AME into a quicktime movie file, h.264, the final product is darkened, almost like there is a grey filter in front of it.  I can't find any setting that might be doing

  • I cant update my mac

    when I try to update safari i get a volume not supported message but when i try to update mac osx 10.6.3 I cant because of a "an error occurred while evaluating javascript for the package" also when I try to update my mac from the apple->software upd

  • Re:Payment terms need to be delete

    Dear Al, My client wants to delete some payment terms which is already exist in the system and they are already in the PO,SO and some Invoices. My doubt is if we delete the Payment terms is there any impact on open PO,SO and invoice ? Anyone have ide

  • Question how SAP behaviours if blocked vendor fixed in src list or in Quota

    Hi There, I would like to know what to expect in the following situation when i create a requisition and activate source determination: 1 Sourcelist - I have create a 2 vedour source list. Fixed one vendor. The fixed vendor record is blocked. Will th