Lenovo V560-43422GU laptop - which wireless card and is there HDMI output

Regarding Lenovo V560-43422GU laptop:
(1) Is there an HDMI output?  Lenovo sales rep says YES, but Bestbuy.com specs say NO.
(2) Which wireless card is included?  Lenovo gave me a list of possibilities, but said the card is actually specific to each dealer/store.  Please tell me which one of the following cards will be in the laptop if I buy it from Bestbuy.com.
Intel 6250
Intel 5150
Intel 6200
Intel 1000
Broadcom 4313
AR 9285

Very good questions with no precise answers online.
I see you already posted on the Lenovo forums and they do not have an answer for you right away I love how the tech says he will contact you in a FEW days... and it is their product. I had a smiliar situation with them and it took 3 days lol.
Again, I see you did your searching well... not a lot of information seems available.I guess physically seeing the computer can verifiy this.
Looking at image #4 on the Best Buy site shows there is an HDMI port, but it is covered.... and that concerns me especially when the SPECS say it does not have an HDMI port. I really do not see why it would not have an HDMI port available, even the lower lines of Lenovo z565 and b560 have them available.... it is almost becoming a standard now days for HDMI.
http://www.bestbuy.com/site/olspage.jsp?id=cat13506&type=page&skuId=1945268&productId=1218301987431&...
^image 4
I will be at a Best Buy on Thursday.
If you do not get a reply back by then I will be there and physically check the machine for the HDMI and interally for the Wi-Fi card that is in there...
But hopefully you get a more informational reply before then =)
I will check back in on Thursday.
Let me know if you have any questions before then.
Good Luck to you.
Geek Squad Agent
Although I am currently a Best Buy employee my involvement with these boards are voluntary and on my own time. I am not representing Best Buy. My comments/posts have no affiliation with Best Buy in any way and are strictly MY OWN words & opinions.

Similar Messages

  • Tried every way to install my broadcom wireless card and failed

    Hello.. i asked this in the newbie section but didn't get any replies.. i really need help and i don't know where else to go.
    i have an hp dv2500 laptop with a Broadcom wireless card.. here is the output of lspci | grep -i net
    08:00.0 Network controller: Broadcom Corporation BCM4328 802.11a/b/g/n (rev 03)
    at first, i tried getting it to work with the broadcom-wl driver from AUR as suggested by this wiki page: http://wiki.archlinux.org/index.php/Broadcom_BCM4312
    i followed all the steps.. however, i did get an error when i tried to exucute this line:
    insmod /lib/modules/2.6.30-ARCH/kernel/drivers/net/wireless/wl.ko
    and the error was:
    error inserting 'wl.ko': -1 File exists ...
    i continued despite this error and when i was done, i couldn't detect the card with iwconfig or wicd.. the modules named "wl" and "lib80211" are loaded but i still can't detect it..
    i uninstalled, re-installed and i got the same behaviour..
    so then i tried the BCM43xx driver as described here: http://wiki.archlinux.org/index.php/Wir … up#BCM43XX
    i unpacked the firmware and restarted but i still couldn't detect it.. and i couldn't load the bcm43xx module because arch says was not found..
    then i tried the driver after that "b43".. followed the steps on the wiki, restarted, and i still couldn't detect the card with iwconfig or wicd..
    i have been trying to get this to work for 3 days now.. i appreciate your time and help in this issue..
    thanks

    thanks for the reply tomk..
    so at least we limited the problem to using broadcom-wl..
    here is dmesg after modprobe -r wl
    Bluetooth: Generic Bluetooth USB driver ver 0.5
    usbcore: registered new interface driver btusb
    Adding 1895660k swap on /dev/sda4. Priority:-1 extents:1 across:1895660k
    forcedeth 0000:00:0a.0: irq 27 for MSI/MSI-X
    Clocksource tsc unstable (delta = 4398045793691 ns)
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    eth0: no IPv6 routers present
    lib80211_crypt: unregistered algorithm 'NULL'
    and after modprobe wl:
    lib80211: common routines for IEEE802.11 drivers
    lib80211_crypt: registered algorithm 'NULL'
    i'm not that good with gnu/linux, so i'm not sure if something is wrong from these messages... do they point to anything?

  • G580 models which wireless card in which model?

    I understand price points mean less features/more features. 
    What I don't understand is the lack of details regarding which wireless card is in which model.
    I do know entry level G580 is basic 1x1 N card. 
    Which cards are in which models please?
    Jim

    The recovery discs can not be downloaded from the web. Therefore you would need to go to ASP, so that they could order it for you.
    I'm not sure, but I think the wifi module is under the keyboard, but don't ask me how you can get there. All I know is, that you will have to remove some screws from the bottom of your notebook in order to clips out the keyboard.
    Anyway, there is software around that can identify devices in your machine, like Everest.
    But are you sure you have Wlan equipped in your notebook? As far as I know a wifi module was not built in.

  • I have an I phone 4 that I use in Singapore, but would like to use it in the US while on holiday. How do I cahnge out the sim card, and is there anything else that I need to do.

    I have an I phone 4 that I use in Singapore, but would like to use it in the US while on holiday. How do I change out the sim card, and is there anything else that I need to do?

    Ignore the other post (the one from Brendan), he has no idea what he is talking about.
    Read your manual (you have a bookmark to it in Safari on your iPhone or put iBooks on your iPhone and download the manual from the iBookStore) and it will show you how to remove the microSIM from your iPhone. AT&T is not tourist friendly and does not offer a pay as you go plan for visitors with an iPhone. If you are going to be here for a short time you can probably buy a pay as you go microSIM and use it before AT&T notices, if it is going to be for a long time that won't work.
    There is a 3rd party company that will sell you a microSIM that will work with AT&T but they are pretty pricey.
    Finally, you can get a pay as you go microSIM from T-Mobile to work with your iPhone but you will only have EDGE data speeds.
    Message was edited by: deggie

  • HT1918 Need help. App store won't accept my wal-mart pre pay debit. I owe $8.48. There's $300 on card. When I check card statement it says apple ear marked $8.48.....yet the store won't accept card and says there's a billing issue???? Confused.

    Need help. App store won't accept my wal-mart pre pay debit. I owe $8.48. There's $300 on card. When I check card statement it says apple ear marked $8.48.....yet the store won't accept card and says there's a billing issue???? Confused.

    Hello milkisoo,
    Wow! Purchasing a new computer and monitor should be a fun and exciting experience, and instead, it sounds like it’s turned into a complete nightmare. I can only imagine your disappointment when you found two charges relating to its purchase on your debit card account, and I’m sorry for any aggravation this caused. 
    As I want to provide you some piece of mind, I pulled up your order number using your email address attached to the forum. After review of its payment information, I found we collected only one payment.  However, when orders are first placed on BestBuy.com, a pending authorization should show up on your bank card to make sure funds are available for the order until it is fulfilled. From there, the authorization should drop off and the collection charge should appear.  This is the case for your one charge of $1,051.69.
    It also sounds like an error may have occurred when you initially attempted to place your order,  resulting in one of your gift cards not registering properly and the order not being completed.  Your card’s issuing bank doesn’t appear to have recognized this and pushed through the pending authorization. This occurred a second time when your account information didn’t quite match up with what we had on file. Please know that we haven’t ordered a collection of these funds and your issuing bank should release the two pending authorizations within 5 to 7 business days.
    Thank you for posting.
    Alex|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Which Wireless Card? Lenovo A26

    Hi I am trying to buy a wireless card for my lenovo thinkcentre desktop  MT-M 9120-A26  which product should I buy?

    Quality USB WiFi adapter should be ok and is most handy. Like D-Link etc. You could also use PCIe WiFi card, but then it will be inbuilt in computer and depending on placement of PC can be good or not so good solution ...
    Disclaimer: While I do work for Lenovo Partner, all my contributions are my personal, non-official and not that of Lenovo or my employer.

  • Which Wireless router and WLAN card should i use with my Satellite 1800?

    TOSHIBA SATELLITE 1800-314
    I NEED TO KNOW WHICH WIRELESS ROUTER I SHOULD BUY AND PC CARD I SHOULD BUY.
    MY CD/DVD ROOM DOESN'T READ DVDS. THANKS.

    Hi,
    normally it doesn't matter which router or PC card you use, they all should work.
    I'm using a card from Netgear, never had any problems with it.
    Bye

  • Which Wireless card do I have in my Satellite A40

    Hi all,
    I got a Toshiba Satalite Pro A 40 (PSA45E) from a friend
    As the Windows XP was quite slow I decided to reinstall the OS and have now a problem to install the Wireless card
    At the moment I have Windows XP (without Service Pack, which must be the first version which was on sale I assume) but cant install the Wlan card
    I tried several times to switch on/off the card with the FN key, but Windows cant find it. Also the device manager does not list any unknown device or Wireless card. Therefore I'm not sure which Card is now installed
    I'm very sure that I saw some SSIDs with the old Windows before installed the new Windows
    now I'm wondiring if I can download recovery CDs from the WEB or find any free Software which can read the hardware on a PC even if the drivers are missing, to see if the card is responding.
    Furthermore I noticed that at the back of the Laptop there is only the MAC on the LAN card on a sticker. could it be that Tosiba didnt put a sticket with the WLAN MAC on the back?
    Where would I be able to find a manual to physically locate the mini-pci card?
    Thanks
    Chris

    The recovery discs can not be downloaded from the web. Therefore you would need to go to ASP, so that they could order it for you.
    I'm not sure, but I think the wifi module is under the keyboard, but don't ask me how you can get there. All I know is, that you will have to remove some screws from the bottom of your notebook in order to clips out the keyboard.
    Anyway, there is software around that can identify devices in your machine, like Everest.
    But are you sure you have Wlan equipped in your notebook? As far as I know a wifi module was not built in.

  • Lenovo C200 All in One Wireless card issues

    I have a brand new Lenovo C200 Atom DC 2 All In One PC (Desktop). I seem to have a problem with the wireless adaptor which is a Atheros AR9285. When I first power up the PC it connects to my router and gets internet speeds of around 5MB per sec, after a few minutes it spows down to around 120kb per sec! I called Lenovo support and after holding for 50 mins to get through I was told that I needed to contact my internet service provider who would be able to change the channel on the PC and improve things!
    I have seven other PC's connected to my router and none of them have any problem. Also I cant transfer files from my central storage drive with the Lenovo because the connection times out because it is so slow. I am convinced it is a problem with the wireless card, there is nothing else that could possibly cause this that I can see. Also this is the 2nd Lenovo with the same fault, I sent the original one back and this is a replacement.
    Technical support are supposed to be calling me back tomorrow but I dont hold out much hope with them after they told me to speak to my internet service provider.
    Has anyone got any ideas what I could do to cure the issue?
    Any help appreciated.

    OK after many hours of searching I found the problem, the issue isn't exactly with the Lenovo although you would expect them to supply a wireless card that is compatible with Windows 7!
    The issue is with the Atheros AR9285 wireless card, if you Google the Atheros card you will find numerous posts where people have had issues with this, there isn't any one straightforward fix, it seems dependent on what router you are using and how you have things set up.
    I played around with my router settings and the settings on the Lenovo and finally found a configuration that worked for me, the Lenovo dosent like some channels on the router but does others, if anyone else gets this I would recommend changing the router setting from auto channel select to one channel between 1 and 11 to find one that works best. That seemed to fix
    mine.
    Thanks a bunch Lenovo support, call my internet service provider, yeh right! Also when you keep people waiting on hold for 50 mins before answering a simple "I'm sorry to have kept you waiting" would be nice not an argument with your CS rep saying "You haven't been on hold for that long".
    Anyone with the most basic knowledge should know that if files can not be transferred from a central drive by the wireless card its nothing to do with the internet service provider!

  • Wireless cards and uploading iWeb??

    Spent many hours/days trying to upload our new iWeb site to our hosting service (not MobileMe or .Mac) via both Cyberduck and Filezilla. The files start uploading and then after a few minutes, it stops and gives me an Incomplete msg. Our site is mainly text and photos (about 9MB, I believe)- no slide shows, blogs or anything fancy. A fellow at the hosting service suggested that maybe using a wireless card could be the problem. Has anyone had trouble with this???
    Thank you.

    Well, we switched from using a wireless card to our local internet service which isn't wireless (except for the three feet from our computer to the little black box!). We still had trouble uploading our iWeb site to the hosting service (we switched to HostExcellence). FileZilla (as well as Cyberduck) kept shutting down in the middle of an upload (even when I broke it down into small files). Finally, I worked with one fellow from HE who had me PUT OUR FILES INTO A ZIP FILE AND IT WORKED!!
    Just wanted to share that in case it could help anyone.
    Thanks

  • Which Wireless Card for Mac Pro 2.93ghz (4.1)

    Hi,
    I would like to add a wireless card to my Mac Pro 2.93ghz (4.1)(early 2009) but im a little unsure of which card is compatible, after searching on the net for info I have these model numbers - Airport Extreme MB988Z/A or MB988ZM/A.
    Many thanks,
    Antz

    I have an Early '08 Mac Pro running an 8800GT in Slot 1 and a 2600XT in Slot 2.
    I got my 2600 for $50 USD and have found it to work very quietly and without fuss. It's 3D performance is a little lacking but I didn't buy it for that.
    It installed straight into Slot 2 and requires no additional power cable. I've also the above setup running four 23" Apple Cinema Displays without breaking a sweat.
    As for your 7300 predicament, for all intensive purposes, this card does not have an the correct internal ROM required to boot an Early '08 Mac Pro. Whilst I've not tested it, I've no reason to doubt well-informed comments from other members:
    http://discussions.apple.com/message.jspa?messageID=8636877#8636877
    Best, R.

  • Wireless card and kernel panic

    So for no apparent reason my airport has failed in my powerbook 17" 1.5 w/1.5. It just has no strength to start and seems to loose juice as time in a given session passes. so I threw a wireless card I had in to see how it would fare. The good news is that it works great but the bad news was that I often had to restart it up to 10x to get it to start instead of just going to the kernel panic screen. The functionality is so hobbled without the card that I'm willing to do this every time I restart but it would be great to make everything sing again.The card is a Sonnet card and they have no functional plugin to fix the issue. I'm running 10.4.9 solidly with no other issues and no other problems once i get a clean startup. Any ideas?

    Kernel panics are not good news as my FAQ* explains:
    http://www.macmaps.com/kernelpanic.html
    If they happen only with the Sonnet card, ask them for updated drivers.
    If they happen with no Sonnet card, it sounds like the router you are using needs a new firmware update. See my FAQ* on Wireless:
    http://www.macmaps.com/WIFI1048.html
    * Links to my pages may give me compensation.

  • Can I pick up wireless (card and antenna questions)

    Hello mac community,
    I bought a June 2004 G5 (dual 2.5ghz) back in Aug of 2004 and at the time, I had the external antenna that came with it, but I have since lost it. I never used the computer for wireless, nor did I ever need to, and now I'm selling it but my buyers are asking if it's capable of wireless.
    I don't know if it is without the antenna, nor do I know if the stock 2.5ghz G5 came with a wireless card in it. Does this mac need a card or would telling them to buy another antenna work? I looked at this page: http://support.apple.com/kb/HT1305 to try to find where the card would be (in the front, under a fan, above the RAM slots right?) and didn't see a card in the slot that I know of, though I'm not good with computers.
    So can this mac get wireless without a card, but with an antenna? Do I have to have a card? And did the G5 stock 2.5ghz have a card? I never removed the card if it did.
    Thanks guys

    My answers assume you're referring to wireless internet, aka Airport Extreme, 802.11a/b/g/n. In any event, most of this applies to Bluetooth as well.
    So can this mac get wireless without a card, but with an antenna?
    No.
    Do I have to have a card?
    Yes. And range will be very short (at best) without the antenna.
    And did the G5 stock 2.5ghz have a card?
    No. Airport and Bluetooth were both optional.
    So, it's capable of wireless, but needs the card and antenna to do so. If someone doesn't want to use the official Apple Airport card and antenna ,available here (card) and here (antenna)). An external USB wireless dongle, such as this one can also be used. The USB dongles are generally the only way to support the fastest wireless connection, 802.11n.

  • Wireless Cards and Linux

    What are some wireless cards that play nice with linux?  Something that works out of the box for most distros and Arch?  This freaking belkin card isn't working, I'm going to sell it on eBay... Any suggestions?

    After recently playing with this myself I actually have some answers... your best bet is to get a wireless card that works with the linux-wlan-ng driver. This page gives you a list of PCMCIA, USB and PCI cards that work with the driver. I got a D-Link DWL-122 802.11b 11 Mbps USB Adapter... after you find an adapter that you like (and works) the key is configuring it.
    First of course you want to find the driver that works with your adapter out of the linux-wlan-ng set. My usb D-Link works with the prism2_usb module (driver). Reading the readme helps alot when trying to configure your card. So depending on if your card is USB or PCMCIA you will first have to modprobe your USB or PCMCIA module and then modprobe the corresponding linux-wlan-ng driver.
    Example:
    modprobe uhci_hcd
    modprobe prism2_usb
    wlanctl-ng wlan0 lnxreq_ifstate ifstate=enable
    wlanctl-ng wlan0 lnxreq_autojoin ssid=<your routers SSID name> authtype=opensystem
    dhcpcd wlan0
    To get all the packages you need:
    pacman -S wireless_tools wlan-ng26 (or wlan-ng24 for 2.4 kernel)
    and pcmcia-cs package for PCMCIA cards
    All of this will get you started with using a wireless card, but each time you reboot your machine you will lose your network info. So what you probably want to do is use a init script to startup each time you boot. There is a wlan script that comes with these packages located at /etc/rc.d/wlan
    I hope this helps!

  • Which Wireless card for P2800?

    Hi,
    I would like to add a Wireless card to my P2800, Win 2000 home edition.
    I have decided to go through Netgear PC Card Wireless 32 bits CardBus Dual Band WAG511 - 108 Mb/sec.
    What do you think? Will I have any problem with that on my pc?
    Thanks a lot for your help.
    Franfrantic

    Hi
    If you have adequate driver for W2000 I dont see any problem why this wireless card should no work properly.

Maybe you are looking for

  • Reloading a single object from DB to cache

    Hello: We are using near+distributed caches with read-through/write-behind persistence to DB. While doing support, sometimes we need to modify a single field of an object (for whatever reason). It looks like Coherence way to do this would be map.put(

  • MIDI TIME OUT ERROR In LEOPARD!!!

    Has anybody had this message when opening Garage Band or any other Midi Program with Leopard? I'm having trouble with the CoreMIDIServer.Framework folder popping up on the Dock! and never launching!! Every program from Cubase, Protools, Logic, Digita

  • Consolidation

    Hello all , Please clarify me that my clients declares plant wise balance sheet to legal authority and they need separate balance sheet as they maintain the will have two company code but they also want consolidated balance sheet for two company code

  • Is it possible to pass data from Flex to BlazeDS/POJO as a stream?

    Is it possible to make a remote call to a remote Java object that uses BlazeDS so that the data is gotten as a stream (InputStream)? For example when uploading a file, it would require less memory. The BlazeDS examples about file upload that I've see

  • Function Module output display

    HI Frnds,      When I am calling the function module and displaying the output the column name is displayed as field name but my requirement is to diplay the field description of that field how to do it tell me Thanks in advance Y.Ravikumar