Lenovo Vibe x : does not start after restore factory settings
Good morning, I face the following problem: I install on the computer Start Lenovo Smart Assistant where I found out that I can update to stable ROM V2.0_1507 so I started to do it. During the update I received a call and the update stuck. I took the phone off and it was working properly. But when I went to do it again I found out that there was not enough space to start the update . Then I thought as a solution to do a factory reset. When I did the phone is stuck to login logo (and even in a different than that in the beginning the phone (is a constant logo of "Lenovo "and below says "POWERED BY android")) and now I can not even open it nor the I see as a device to my computer.
In the forum i did not read someone to have the same issue. Does anyone have idea how can I restore my phone ;;
Solved!
Go to Solution.
Finally it's over i just update a new ROM via flash tool and now is working fine
Similar Messages
-
Wifi not working after restoring factory settings
Need some help.
I have an iMac with 10.9 and an older Airport Extreme base station (802.11n, I think it is 2nd Gen. Square with an indentation around the sides toward the top).
I had been encountering problems so restored to factory settings.
I went through set-up and the unit glows green. The airport utility shows Internet and Wifi both green. The iMac can access the internet.
However, the problem is with other devices.
iPhone 5 and iPad mini both see the new wireless network but can't connect to it. Spining and spinning and spinning. The iOS airport utility for both devices show internet green and Wifi green. However no connection on either Both will connect to other wireless networks fine.
Thanks in advance.Try changing the name of the AirPort Extreme wireless network and also the password.
Keep the wireless network name short.....no more than 20 characters. 8-10 would be ideal. No special characters like an apostrophe, dollar sign, asterisk, etc.
Use only letters and numbers with no blank spaces in the name.
Same rules for the password, which must be at least 8 characters
Apple's iOS Troubleshooting Guide is here:
http://support.apple.com/kb/TS1398 -
My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks
"UPAD lite?"
I expect that you mean some version of iPad.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
Time Machine does not start after external hard drive is connected
Time Machine does not start after external hard drive is connected
These are the iCloud storage options: http://www.apple.com/icloud/includes/lightbox-storage.html
Also bear in mind that:
1. restoring data over icloud takes time
2. iCloud is not designed as a replacement to Time Machine. -
RAC does not start after trying to move storage
Hello,
We have a two nodes RAC Oracle 10g and ASM groups defined on one external storage.
RAC does not start after we reformated the storage to RAID 10.
What we did:
1) deleted the database
2) reformated the external storage to RAID 10 and defined needed volumes for OCR, VotingDisk and ASM
3) on both nodes
- recreated VotingDisk
node1:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
node2:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
- tried to move OCR but was able only on one node:
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocrmirror /dev/rdsk/c7t30d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr /dev/rdsk/c7t29d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr
These return ok for both node1 and node2:
node1:oracle$ cluvfy stage -post hwos -n node1
node1:oracle$ cluvfy stage -post crsinst -n node1,node2 -verbose
Performing post-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "node1"
Destination Node Reachable?
node1 yes
node2 yes
Result: Node reachability check passed from node "node1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
node2 passed
node1 passed
Result: User equivalence check passed for user "oracle".
Checking Cluster manager integrity...
Checking CSS daemon...
Node Name Status
node2 not running
node1 not running
Result: Daemon status check failed for "CSS daemon".
Cluster manager integrity check failed.
Checking cluster integrity...
Cluster is divided into 2 partitions.
Partition 1 consists of the following members:
Node Name
node1
Partition 2 consists of the following members:
Node Name
node1
node2
Cluster integrity check failed. Cluster is divided into 2 partition(s).
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
WARNING:
CSS is probably working with a non-clustered, local-only configuration on nodes:
node1
Verification will proceed with nodes:
node2
Uniqueness check for OCR device passed.
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
Data integrity check for OCR passed.
OCR integrity check failed.
Checking CRS integrity...
Checking daemon liveness...
Check: Liveness for "CRS daemon"
Node Name Running
node2 no
node1 yes
Result: Liveness check failed for "CRS daemon".
Checking daemon liveness...
Check: Liveness for "CSS daemon"
Node Name Running
node2 no
node1 no
Result: Liveness check failed for "CSS daemon".
Checking daemon liveness...
Check: Liveness for "EVM daemon"
Node Name Running
node2 no
node1 yes
Result: Liveness check failed for "EVM daemon".
Liveness of all the daemons
Node Name CRS daemon CSS daemon EVM daemon
node2 no no no
node1 yes no yes
Checking CRS health...
Check: Health of CRS
Node Name CRS OK?
node1 unknown
Result: CRS health check failed.
CRS integrity check failed.
Post-check for cluster services setup was unsuccessful on all the nodes.
Please help.Thanks for the answer.
Problem is that the RAC is not healty, I know how to start it but now it doesn't start and I cannot find helpful logs.
You can see that cluster is not healty from cluvfy output.
When I tried to start crs whith crsctl start crs but:
- on node2 none of the demons starts (CSS, CRS or EVM)
- on node1 CSS and EVM demons start but CRS is not starting and I cannot find helpful logs
Problem 2: Cannot change OCR location
node2:root$ cat /var/opt/oracle/ocr.loc
+#Device/file /dev/rdsk/c7t30d0s3 getting replaced by device /dev/rdsk/c7t30d0s3+
ocrconfig_loc=/dev/rdsk/c7t30d0s3
local_only=falsenode2:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
node1:root$ cat /var/opt/oracle/ocr.loc
ocrconfig_loc=/u01/oracle/product/10gr2/db/cdata/localhost/local.ocr
local_only=TRUE
node1:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
Problem 3: On node 1 I wrongly issued a command
node1:root$ /u01/oracle/product/10gr2/db/bin/localconfig reset
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Configuration for local CSS has been initialized
Adding to inittab
Startup will be queued to init within 30 seconds.
Checking the status of new Oracle init process...
Expecting the CRS daemons to be up within 600 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
Oracle CSS service would not start as installed
Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started -
Game does not start after installing on mac pro
Game does not start after new install on mac pro ?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
My iPhone4 does not start after it was out of charge and recharged again?
My iPhone 4 does not start after it was out of charge and recharged again?
Hi Svedjot,
Welcome to the Support Communities!
The following article will provide some troubleshooting steps for this issue:
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281?viewlocale=en_US
Cheers,
Judy -
16 GB x-Fi Style - does not start after charging
Hi,
4 weeks ago I bought my x-Fi style and used it during my holidays for 2 weeks. After charging the player only twice (USB-connection with notebook), it now fails starting. Maybe there is an internal temperature fuse to protect from overheating and I only have to wait to try again? After connecting to USB the CREATIVE sign appears but disappears directly and a battery symbol appears and remains on the screen. After disconnecting the player does not react in any way. I already tried to reset but cannot start it again.
Can anyone help me?
Cheers,
UliRe: 6 GB x-Fi Style - does not start after charging:Just fyi
I found the website for Creative to be very frustrating. Not one snail mail address or corporate headquarters info. The link for website feedback didn't work and one other customer service link was a dud. They clearly don't want to be 'bothered' with complaints, or anything positi've for that matter!
But, I searched on the forum and found a three-year-old post about someone who was frustrated with having to carry around a paperclip to always push 'reset' on his X-Fi -- and the light dawned! Didn't know I had one of those. I pressed reset and voila! it is working again. Still had to charge it, but it accepted the charge this time and I was able to finish my book and move on to the next. Now, the next problem is I tried to access my wireless network which has a $ in the password and there is no $ in the choices for entering a password. So, now I have to change the password, change all of my device passwords (Blu-Ray, iPad, laptops(2), friend's laptops, etc. a huge pain. Seems to me they could have included a $ in the choices! -
My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.
Hy myneck,
Happy Holidays! The resource below may provide some steps to try if your MacBook Pro won't start.
Troubleshooting: My computer won't turn on - Apple Support
http://support.apple.com/en-us/TS1367
This article discusses what to do if your Mac won't turn on. To differentiate this from a display issue, be sure that when you press the power button:
You don't hear a startup chime.
You don't hear any fan or drive noise.
There is no video on your built-in or external display
If your computer has power but doesn't display any video, it may have one or more of these similar symptoms when you press the power button:
You may hear a startup chime.
You may hear fan or drive noise.
You may see a light from the Sleep LED (if your Mac has one).
Pressing the Caps Lock key on the keyboard causes it to light.
If any of these display-related conditions occur, see Troubleshooting: My computer has no video instead. Otherwise, continue with this article.
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
I hope this information helps ....
- Judy -
EXE DOES NOT START AFTER DOWNLOADING
I downloaded lr 4.3 but double clicking it does not open the exe. When I double click older lr downloads they still open normally.Right clicking and open does not work either. What to do?
Windows Vista Home Premium 6.0.6002 SP2 Build 6002, Intel Core 2 Quad
Q9300 2.5GHz. When I double click the download, the arrow starts rotaing
for about 30 seconds and then disappears without any new window opening
Op 17/12/2012 23:55, Jeff A Wright schreef:
>
Re: EXE DOES NOT START AFTER DOWNLOADING
created by Jeff A Wright
<http://forums.adobe.com/people/JeffAWright> in /Downloading,
Installing, Setting Up/ - View the full discussion
<http://forums.adobe.com/message/4928607#4928607 -
The Connection Server does not start after an upgrade to BO4.1 SP3
Hello guys,
The Connection Server does not start after an upgrade to BO4.1 SP3
We are in process to upgrade our Business Objects environments to BO4.1 SP3
The first 2 environments , the upgrade went fine. But the third environment de connection server won’t start.
When I always try to start it returns me a failed status and shows me that the server is considered failed because it has stopped 5 time(s) in 60 minute(s).
Our OS is AIX
Uncaught Exception in SilentScope: [CS] Ser
verInitialization::InitManager::Initialize: 0.007^^
The CS initialization failed within the CS server. Aborting
trc file: "connectionserver_BIO.ConnectionServer_ncs.trc", trc level: 1, release: "720"
GerdHi Amine
The File seems ok
File from the failing connection server
-rw-rw---- 1 bioadm bosys 43993 Apr 11 11:29 boconfig.cfg
File from our test system
-rw-rw---- 1 bitadm bosys 43892 Apr 14 10:56 boconfig.cfg
I created a new connectieserver(by the copy function), but the new server won't start.
Regards
Gerd
Log
|89d4a6e0-2a89-7a05-3020-a51d517ab872|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] Unhandled exception raised during CS initialization.
init_srv.cpp:95:-: TraceLog message 3
|4dcf04b1-1e1d-df13-48ad-a67f06e29864|2014 04 14 11:54:30:113|+0200|Error| |<<|E|X|connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||Uncaught Exception in SilentScope: [CS] ServerInitialization::InitManager::Initialize: 0.003
|77ad78f4-37f7-3013-3b50-85cce9fbe7b8|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] The CS initialization failed within the CS server. Aborting. -
My phone says it needs to connect to iTunes. I do this and it will not update or restore factory settings?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work. -
SAP Does not start after backup complition
Dear All,
Since last two times when we put Offline whole database + Redolog
backup, after complition of backup SAP Does not start.
I have tried to start SAP Manually, but didn't start.
To start SAP we have to restart the SERVER.
Attached please find backup log.
Thanks and Regards,
NiravThanks you all for quick response.
Backup log is pasted at end of message. Wile you please guide me where dev_disp log is located.
I am taking backup through DB13.
When I got this problem. Database was not started. But at O/S level SMON is running. Shutdown normal or transactional was not working. I have to shutdown abort. and start the database.
SAP services are also running at O/S level.
I have doubt about work process.
Thanks
Nirav
BR0051I BRBACKUP 7.00 (24)
BR0055I Start of database backup: beamxrbx.aft 2009-05-06 04.00.05
BR0484I BRBACKUP log file: /oracle/PRD/sapbackup/beamxrbx.aft
BR0477I Oracle pfile /oracle/PRD/102_64/dbs/initPRD.ora created from spfile /oracle/PRD/102_64/dbs/spfilePRD.ora
BR0083W Compression rates out of date - run BRBACKUP with option '-k only'
BR0101I Parameters
Name Value
oracle_sid PRD
oracle_home /oracle/PRD/102_64
oracle_profile /oracle/PRD/102_64/dbs/initPRD.ora
sapdata_home /oracle/PRD
sap_profile /oracle/PRD/102_64/dbs/initPRD.sap
backup_mode ALL
backup_type offline_force
backup_dev_type tape
compress hardware
tape_copy_cmd dd
cpio_flags -ovB
cpio_in_flags -iuvB
dd_flags obs=64k bs=64k
dd_in_flags ibs=64k bs=64k
rewind mt -f $ rew
rewind_offline mt -f $ offl
tape_size 102400.000 MB
tape_address /dev/rmt/0mn
tape_address_rew /dev/rmt/0m
volume_backup PRDB01,PRDB02,PRDB03,PRDB04,PRDB05,PRDB06,PRDB07,PRDB08,PRDB09,PRDB10,
PRDB11,PRDB12,PRDB13,PRDB14,PRDB15,PRDB16,PRDB17,PRDB18,PRDB19,PRDB20,
PRDB21,PRDB22,PRDB23,PRDB24,PRDB25,PRDB26,PRDB27,PRDB28,PRDB29,PRDB30
expir_period 29
tape_use_count 100
exec_parallel 0
system_info prdadm/oraprd rlsdbi HP-UX B.11.31 U ia64
oracle_info PRD 10.2.0.2.0 8192 7547 46814166 rlsdbi UTF8 UTF8
sap_info 700 SAPSR3 0002LK0003PRD0011Q21439814270013NetWeaver_ORA
make_info hpia64 OCI_102 Apr 21 2007
command_line brbackup -u / -jid ALGOF20090506040000 -c force -t offline_force -m all -p initPRD.sap -a -c force -p initPRD.sap -sd
BR0116I ARCHIVE LOG LIST before backup for database instance PRD
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /oracle/PRD/oraarch/PRDarch
Archive format %t_%s_%r.dbf
Oldest online log sequence 7544
Next log sequence to archive 7547
Current log sequence 7547 SCN: 46814166
Database block size 8192 Thread: 1
Current system change number 46815598 ResetId: 674927195
BR0118I Tablespaces and data files
Tablespace TS-Status F-Status File Size Id. Device Link Type MaxSize IncrSize BlkSize
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata1/sr3_1/sr3.data1 2097160192 4 1073872902 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata1/sr3_2/sr3.data2 2097160192 5 1073872902 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata1/sr3_3/sr3.data3 2097160192 6 1073872902 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata1/sr3_4/sr3.data4 2097160192 7 1073872902 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata1/sr3_5/sr3.data5 2097160192 8 1073872902 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata2/sr3_10/sr3.data10 2097160192 13 1073872903 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata2/sr3_6/sr3.data6 2097160192 9 1073872903 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata2/sr3_7/sr3.data7 2097160192 10 1073872903 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata2/sr3_8/sr3.data8 2097160192 11 1073872903 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata2/sr3_9/sr3.data9 2097160192 12 1073872903 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata3/sr3_11/sr3.data11 2097160192 14 1073872904 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata3/sr3_12/sr3.data12 2097160192 15 1073872904 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata3/sr3_13/sr3.data13 2097160192
BR0143I Backup type: offline_force
BR0113I Files will be compressed by hardware
BR0130I Backup device type: tape
BR0102I Following backup device will be used: /dev/rmt/0mn
BR0103I Following backup volume will be used: PRDB25
BR0289I BRARCHIVE will be started at the end of processing
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0208I Volume with name PRDB25 required in device /dev/rmt/0mn
BR0280I BRBACKUP time stamp: 2009-05-06 04.00.07
BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0351I Restoring /oracle/PRD/sapbackup/.tape.hdr0
BR0355I from /dev/rmt/0mn ...
BR0241I Checking label on volume in device /dev/rmt/0mn
BR0242I Scratch volume in device /dev/rmt/0mn will be renamed to PRDB25
BR0280I BRBACKUP time stamp: 2009-05-06 04.00.08
BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0202I Saving /oracle/PRD/sapdata2/sr3700_7/sr3700.data7
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/sapdata2/sr3700_7/sr3700.data7
#SAVED.... sr3700.data7 PRDB25/43
BR0280I BRBACKUP time stamp: 2009-05-06 04.20.17
BR0063I 40 of 62 files processed - 82240.312 MB of 120066.277 MB done
BR0204I Percentage done: 68.50%, estimated end time: 4:29
BR0001I **********************************________________
BR0202I Saving /oracle/PRD/sapdata2/sr3700_8/sr3700.data8
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/sapdata2/sr3700_8/sr3700.data8
#SAVED.... sr3700.data8 PRDB25/44
BR0280I BRBACKUP time stamp: 2009-05-06 04.20.42
BR0063I 41 of 62 files processed - 84640.320 MB of 120066.277 MB done
BR0204I Percentage done: 70.49%, estimated end time: 4:29
BR0001I ***********************************_______________
BR0202I Saving /oracle/PRD/sapdata3/sr3700_10/sr3700.data10
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/sapdata3/sr3700_10/sr3700.data10
#SAVED.... sr3700.data10 PRDB25/45
#FILE..... /oracle/PRD/sapdata1/system_1/system01.dat
#SAVED.... system01.dat PRDB25/60
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.07
BR0063I 57 of 62 files processed - 119850.445 MB of 120066.277 MB done
BR0204I Percentage done: 99.82%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogA/log_g11m1.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogA/log_g11m1.dbf
#SAVED.... log_g11m1.dbf PRDB25/61
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.14
BR0063I 58 of 62 files processed - 119900.446 MB of 120066.277 MB done
BR0204I Percentage done: 99.86%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogB/log_g12m1.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogB/log_g12m1.dbf
#SAVED.... log_g12m1.dbf PRDB25/62
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.22
BR0063I 59 of 62 files processed - 119950.447 MB of 120066.277 MB done
BR0204I Percentage done: 99.90%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogA/log_g13m1.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogA/log_g13m1.dbf
#SAVED.... log_g13m1.dbf PRDB25/63
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.29
BR0063I 60 of 62 files processed - 120000.448 MB of 120066.277 MB done
BR0204I Percentage done: 99.95%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogB/log_g14m1.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogB/log_g14m1.dbf
#SAVED.... log_g14m1.dbf PRDB25/64
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.36
BR0063I 61 of 62 files processed - 120050.449 MB of 120066.277 MB done
BR0204I Percentage done: 99.99%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogA/cntrl/cntlrPRD.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogA/cntrl/cntlrPRD.dbf
#SAVED.... cntlrPRD.dbf PRDB25/65
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.42
BR0063I 62 of 62 files processed - 120066.277 MB of 120066.277 MB done
BR0204I Percentage done: 100.00%, estimated end time: 4:27
BR0001I **************************************************
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.44
BR0304I Starting and opening database instance PRD ...
BR0280I BRBACKUP time stamp: 2009-05-06 04.28.10
BR0305I Start and open of database instance PRD successful
BR0117I ARCHIVE LOG LIST after backup for database instance PRD
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /oracle/PRD/oraarch/PRDarch
Archive format %t_%s_%r.dbf
Oldest online log sequence 7544
Next log sequence to archive 7547
Current log sequence 7547 SCN: 46814166
Database block size 8192 Thread: 1
Current system change number 46815880 ResetId: 674927195
BR0056I End of database backup: beamxrbx.aft 2009-05-06 04.28.11
BR0280I BRBACKUP time stamp: 2009-05-06 04.28.13
BR0053I BRBACKUP completed successfully with warnings
BR0280I BRBACKUP time stamp: 2009-05-06 04.28.13
BR0291I BRARCHIVE (action ID aeamxrbx) will be started with options '+beamxrbx.aft,42106018475,PRDB25,62 -jid ALGOF20090506040000 -d tape -c force -p initPRD.sap -sd'
BR0280I BRBACKUP time stamp: 2009-05-06 04.31.42
BR0292I Execution of BRARCHIVE (action ID aeamxrbx) finished with return code 0 -
TS3274 iPad does not start after the latest software update
After downloading the latest software update on 25 April 2014, my iPad does not start. The reset mechanism does not have any effect. I would be thankful for advice.
If the reset doesn't work, force iPad into recovery mode.
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
WebAnalysis does not start after workspace is set on Windows Authentication
I've used [doc Hyperion System 9.3.x Configuring the BI+ Workspace for Single Sign-On (SSO) with Internet Information Services (IIS) [ID 1100096.1] to configure SSO for workspace users. It works fine. Though since then the WA service does not start anymore. The error message which is raised sounds very very familar but still I am not able to tackle it. The message in the log or the analysis console is "[WARN] [STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.analyzer.utils.general.HYAUtil - Wait for workspace [
[WARN] Timer-2 com.hyperion.analyzer.utils.general.HYAUtil - ."
I am very sure it had something to do with rights/ permissions, but also after playing around with IIS and ntfs permissions for hours I can't get SSO en WA both working at the same time.
As soon as I set my workspace aplication in IIS on windows integrated, the SSO is working but as soon as a I restart the WA service it fails to start. When I set the workspace application IIS on anonymous the WA service start fine but then the SSO is not working anymore.
It drives me crazy.
Hopefully its a small matter for you to solve!
Thanks in advance.Dont know exactly whats happened but I presume something went wrong during the update procedure.
If you will be not able to start the notebook in the safe mode or to boot the notebook then user the Toshiba recovery CD to gets the notebook working!
Maybe you are looking for
-
Dear all, I have created a document on my iPhone, and stored it on iCloud. I have updated the document both on my iPhone and on my iPad. Now, I cannot open the document on my iPhone anymore, even a reset of the phone did not help. Via iPad I also can
-
How to make a form direct to different pages depending on which answers you select?
I am creating an online application. Before the user can get access to the application, I want to create a pre-qualification form. I need to create it to where if they answer a certain form field one way, it will take them to a page that says "Sorr
-
PCA report for balance sheet accounts
Hi, i have assigned Profit Center in Material. So the Cunsumption account hit the Profit center. If i see the GL document profit center assigned at line item, but i couldnot able to view the PCA report for Balance sheet account Can you please help. T
-
Beginner's query: How to call a method on close of a frame?
Hi. I wrote a frame that inherits from JFrame. There I called *"setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE)"* (more or less). I now wish that the frame would call a method when it closes. How can I define that? I assume some action listeners shoul
-
Prime Infrastructure 1.3.0.20 - High CPU Load
Hi community, we have a running Prime Installation (setup a few month ago), and since the last 2-3 weeks my customers admins complain that the system´s response time is very slow, regardless which browser they use. I already did a "ncs cleanup" thro