Lenovo vibe x2 TO version

Hi friends İ have a lenovo vibe x2 TO version .but i have a problem.this rom only eng and china language.have you to version multilanguage rom ?Note: i install eu rom or cu rom but imei invalid problem..help me please.

Hi friends İ have a lenovo vibe x2 TO version .but i have a problem.this rom only eng and china language.have you to version multilanguage rom ?Note: i install eu rom or cu rom but imei invalid problem..help me please.

Similar Messages

  • Lenovo Vibe X2 Cu Version Lollipop Update?

    I am an owner user of vibex2cu. As i followed, new android update(android 5.0) is presented for vibex2eu and vibex2ap. When will android 5.0 update be available for vibex2cu.

    I think that lenovo neglected to include a system update application in the Vibe x2-cu. I think this because when pressing the system update button the settings app crashes. This behavior usually happens when there is no app installed that can complete the requested action. Also looking through the apps installed, there is no app that resembles an ota app. I feel like owners of the x2-cu will probably manually have to flash the update when and if it becomes available.

  • Rom for Lenovo Vibe Z K910L Lte version

    When the rom for Vibe Z LTE version, Kit kat going to be release? All the dual sim vibe z already got kit lat. Looks the LTE version has been left aside. Due to unpopularity.

    Hi
    You should have a Focus Mode option(camera settings)
    Switch from Auto to Continuous an vice versa and see if it helps.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • [Lenovo Vibe X2 - AP]: SIM registration failed after firmware flashing

    Hello forum,
    I have a Lenovo Vibe X2 -AP, India version.
    I flashed EU ROM in my phone only to realize that EU is meant for single SIM devices only. So in order to get second SIM working, I put CU & then TO ROM I found on needrom.com. With these Chinese ROMs my second 2G SIM started working but first LTE SIM was not getting registered. So I put EU ROM again .. Now both SIMs are not getting detected. IMEI is shown as "unknown".
    There is no AP ROW ROM on the internet.
    Is my device unrecoverable now? Do I Have any option?

    Hello. can you help with my post. ?
    https://forums.lenovo.com/t5/K-S-and-Vibe-Series/Lenovo-vibe-x2-flashing/td-p/1839037

  • Problems with the Lenovo Vibe x S960

    I had bought Lenovo vibe x Almost 1 month ago and I am Experiencing lot of problems with this phone.
    Although having a 1.5Ghz processor it lags in many apps and games like asphalt 8, fast n furious, robocop etc.
    experienced lot of problems especially with the battery and earphones.
    The earphones button doesnt work to pause/play music.
    It says "try again when you're online"
    Why do i have to be online to Play/Pause music.
    Btw my earphone had also screwed up.
    After using it for a while the right side had stopped working.
    Once i had charged it to 100% and then i removed charger and locked screen and then it stopped working.
    Didnt switch on again.
    Sent for repair and they tell me its working.
    After receiving from service it stopped working again.
    When connected to wifi or data usage, it restarts automatically sometimes.
    Cannot boost wifi usage well, slows down wifi speed if others are using the wifi on their phones. My phones wifi slows, but others' phones still work.(embarrassing).
    Takes long time to turn on data and get connected to cellular networks.
    Dont feel like buying any lenovo product in future.
    Also it was very difficult to find support for lenovo phones.
    Take my advice DO NOT BUY THIS PHONE.

    I using Lenovo VIBE X S960.I'm here to share my problem with this device. I had update Android Jelly Bean 4.2 to Android KitKat 4.4.2. My android system information:
    Kernel:
    Buildslave@nj-bs9#1
    Wed July 2 16:43:40 CST 2014
    Baseband version:
    S960.ROW.V103,2014/07/02 17:03
    ROM Version: S960_ROW_S211_140702.
    After update android KitKat, my device having a lot of problem like:
    Bluetooth software missing, Wi-Fi connection problem, Screen always hang.
    That, I had reset to factory setting but Android KitKat still no don't change. After reset, my device show Your Device on metamode. Then it come missing some ROM file and corrupted.

  • Lenovo Vibe X

    I recently bought Lenovo Vibe X (S960), however there are no croatian language on it. Is it possible to install croatian language ? I suppose I need to install new firmware that has multilanguage support, but I cannot find such download link. Does anyone hava a link for download or is willing to make a backup of his firmware with multilanguage support ?

    You're already running a custom firmware....Unfortunately even the official ROW(rest of the World) firmware dosen't support HR.
    The easiest way to add HR to your phone is to root the phone(That's if you're not already rooted) and install THIS or THIS .
    If you're not already rooted use the latest Vroot version to obtain root access
    Hope this helps.
    Regards..
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Lenovo Vibe X 2

    Hi Team,
    I bought a brand new Lenovo vibe X2 from Flipkart and after using for a week I experience this problem. 
    The battery meter is stuck at 100% and suddenly I get a message "SIM is unplugged" and the mobile gets restarted. The battery meter also does not come down even though I keep using it. 
    Phone Details:
    Android Version : 4.4.2
    Build Number: X2-AP_ROW_S122_1411127
    Please help as I am looking to replace the mobile with Flipkart. Urgent help needed with solution 

    Hi
    Have you tried a factory reset?
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Lenovo Vibe X2 notification

    hi,
    i have a questions about lenovo vibe x2.. 
    i've tried to enabled notification on lenovo vibe x2 but i got the problem with this LED notification that if i have a message from Whatsapp and BBM the LED notification only blink once(can't repeat blinking). What is the problem with my lenovo vibe X2? i haven't root and using the last version of ROM(Updated over OTA).

    I suppose you're referring to the ''What's DOS?'' under your username.It's a sort of ''clasification'' that reflects your participation in the forum ....You're a ''junior member''(you registered recently & have only 3 posts till now).The system has given you ''this status'' automatically.If you're more active,help others,etc...you're status will change.
    ''What's DOS?''=Junior member.
    THIS article explains what the real DOS is......
    Regards.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Lenovo Vibe Z2 Pro with no stock Android

    Hello there, I recently bought in China my Lenovo Vibe Z2 pro (K920).It is rooted but not stable many hang ups and resets later I decided to update it.The following update was available. Version number: VIBEU_V2.0_1448_ST_K920_CMCC After this update still a lot of problems so eventually I did a factory reset. Now I have a phone with just the Vibe user interface. I have learned on youtube how to boot the phone in stock android to go into developer mode.But, in developer mode I have no option to switch it to stock android with google play etc. Now I have a beautiful phone but no google play to install whatapp Facebook and other cool apps. How can I make this phone a stock android phone? Thanks in advance, Ger van de Kolk

    gvdkolk wrote:
    Hello Guru,
    One question:
    Since I went to VIBEU_V2.0_1448_ST_K920_CMCC my phone is not connacting to the 3g network.
    Just edge. I refreshed apn restart the phone, no result.
    Is this a result of the update?
    Thanks in advance,
    Ger
    Hi Ger
    The Chinese K920 version is meant to be sold and used only in China with a certain local carrier/provider(That's why it's got the ''China Mobile'' logo on the back).The main difference between the Chinese and the international K920 version is the GSM receiver(hardware difference)....
    .....It seams there is a partial workaround(To make the Chinese version more ''internationally 3G/4G friendly'') but my experience with the Chinese K920 is limited and in this case it would be better to ask the actual users->
    Check out THIS THREAD .
    I can't help you much on this one....Sorry.
     

  • LENOVO VIBE Z2 K920 - Chinese vs International - LTE BANDS / FREQUENCIES

    I have two questions regarding the differences between the Chinese market version of the VIBE Z2 K920 and the international version of the phone. Do the two versions operate on different frequencies? My main concern is the LTE bands and whether there is any benefit to buying the international version over the Chinese version. My carrier operates on LTE bands 7 (700 MHz), 4 (1700 MHz), & 4 (1700 MHz). Are there any hardware differences between the two versions or is the only difference the lack of Google Apps and less language options in the Chinese market version? Thanks!

    Here is another site that claims both FDD-LTE and TDD-LTE support but they mention that FDD-LTE must first be activated. Attention Please:
    Lenovo K920 Vibe X2 Smartphone is compatible with both TD-LTE and FDD-LTE; and it needs to be activated first before supporting FDD-LTE network .
    Activation Steps:
    1: Input *#*#5920#*#* on the dialpad
    2: Setting~Wireless & Networks~Mobile Networks~Service~FDD/TD/WCDMA/GSM for choice http://www.pandawill.com/lenovo-vibe-z2-pro-k920-smartphone-snapdragon-801-quad-core-60-inch-3gb-32gb-grey-p94158.html

  • Lenovo Vibe Z2

    I noticed, that Lenovo Vibe Z2 is already available in EMEA as of this week and cost rougly 299 euro. I am not sure if this is the final price or the price can still go down.
    Does anyone know what is the model name of Vibe Z2? LIke k920 is the Pro version so what is this phone called?
    Finally, do you know if the 2GB of RAM is sufficient for running the VIBE UI smoothly? 
    Is the Vibe UI exactly the same as for this phone as for the Pro version and do you think it will get updated to Andorid L?

    I got my hands on Lenovo Vibe Z2 (not the PRO) yesterday, so I thought I give some update here on the model. It was releised last week in Slovakia and probably whole EMEA. 
    It as a 5.5 inch and it feels quite well in hand, in fact it feels like a normal phone and not a phablet. Desptie 5.5 inch it feels like 5 inch in hand, it is very conftable in fact and lighter than the PRO version. 
    Although it is still metalic, it is a bit differently desgined than the PRO version. One could argue it looks even nicer. The main downside, is that the metalic buttons seemed shaky making little noises when touched slightly.
    The VIBE UI on a Vibe Z2 is similar but not exactly the same as the PRO version. For example, the camera has no professional mode. There might be a few other difference too.
    Questions:
    Does anyone know if there is still the option to use stock android in Vibe Z2?
    I also wonder if there is the Secure Zone or that is also gone for Vibe Z2?
    (Sorry, I did not get to test these two).

  • Lenovo Vibe X2_CU

    Well, Im a Lenovo Newbie.  I just purchased a Lenovo Vibe X" from Amazon as m sony fell off my bike and smashed to pieces, and the Lenovo looked so nice.It arrived today, it is super sexy, and super light which is great, however after a little reading and research, like so many others my bargain phone came at a price in thats it full of chinese apps, that I cant seem to get rid of. I have seen many posts in other forums on rom replacements, rooting etc, and though I am technical, many of these sights dont actually offer an actual working method. Surely someone on this forum can offer assistance to such things.  I will be happy to just root it and remove the apps I do not want or need.  I will need to be able to use the phone as an android device, so my thinking is to root will give me what I need to remove things, but not replace the actual rom with something custom built by someone I dont know. ANy one able to render assistance at all. It really is a great looking phone.

    Hi Vrony
    This forum generally deals with the ROW International Lenovo devices.Information on CN only devices is limited.The Lenovo X2-CU is the Chinese/CU=China Unicom version.The ROW models are the X2-EU and X2-AP(market dependent)
    As far as I know THIS are the X2-CU specs.
    HSDPA: 850 900 1700 1900 2100 HSPA+
    Just to make sure you can install THIS app and check the supported frequencies.
    Open app->MTK Settings->BandMode->Check the supported frequencies(on SIM1 and SIM2).
    Please do provide an update.Might help other X2-CU users.
    Thanks.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Lenovo Vibe X2 - USB device not recognized

    Dear All, Hope all is fine with you. Friends, I have bought this model (Lenovo Vibe X2) in the month of January 2015 from online purchase in India. THe phone is really nice, except the few things i.e. Picture/Camera Quality specially in low light, the photo quality is too poor, if there is network issue, phone gets heat a lot but overall, I am completely satisfied with the product. Recently, I have came across one issue, that from April onwards, my phone if connected to Laptop/Desktop using USB cable, it charge's but shows the message as "USB Device not recognized". I tried lot of things, even factory resetting but nothing helped me. Download the drivers as well, but no use. Tried with multiple computers but same message. Can anyone tell me how can I fix this issue? Since I have lot of data & need to sync my contact & backup the phone regularly, I face lods of issues doing above activities. Your help is really appreciated. The phone is currently having Android Lolypop (5.0). Below are the details: Model Number: Lenovo X2-AP Android Version: 5.0 Baseband Version (Slot1)-X2-AP-L.V2,2015/05/20 16:26 BASEBAND VERSION (SLOT2) X2-L.MD2-V3, 2015/05/11 10:14 BUILD NUMBER: X2-AP_S224_150709_ROW Regards, Sachin

    Lenovo vibe x2-ap sotwer

  • Where Do You Buy Your Lenovo Vibe ?

    Hello All, I would like to buy a lenovo vibe z90-7 but I don't know where. Is there here some european 's user of this phone ?Where do you buy it please ?

    Hi rami,
    yes its great, I love it so far :-)
    I did not change the ROM, it is the EU version. Just updated to Lollipop, everything working fine.
    Language on the phone (system language) is English. I cannot switch to German but I dont care. Keyboard can be set on every language you want to. BR

  • Not able to connect to wifi wpa2 networks in lenovo vibe x2

    Not able to connect to wifi wpa2 networks in lenovo vibe x2. It displayed saved.but not connecting. It connects to open and WEP wifi networks. Please help

    Are you trying to connect to a 2.4GHz or a 5GHz network?
    What encryption is your router set to use : AES,TKIP/AES,..?
    Have you tried to unplug the router from the power source for 2-3 minutes->Plug it back in-> Wait until it establishes an Internet connection-> Try to recreate the phone connection.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Maybe you are looking for

  • So I made the Switch, but.... (this is a long a read)

    Hi Everyone, I've been debating to switch for the past year now, and been visiting all the Mac forum sites. After all the hype and fun of Macworld, and after watching Steve's keynote on Tuesday, I decided it was the right time to buy. I bought a 12"

  • Error in pricing formula

    Hi,everybody,this one problem that I cannot solve it ,so I post it hope you all can help me: After defined one formula in Oracle advanced pricing,and then I cannot Book any order in Order Module,and it shows one message as follows: Error in Formula p

  • HT1677 Safari keeps crashing when I open a new page

    Safari crashes each time I attempt to open an additional page also I can't 'X' out of an open page

  • How do I change Adobe XI pro from trial to purchased

    I bought a new laptop.  I purchased an upgrade version of Adobe XI pro.  When I installed Adobe, I accidentally selected trial version instead of purchased and did not enter my serial number.  How do I enter my serial number so that the Adobe shows u

  • Powershell 4 transcription broken

    Hi, after installing KB2919355 for Windows Server 2012R2 (or Windows 8.1) the transcription functionality of Powershell seems to be broken. Input: PS C:\Windows\system32> start-transcript c:\test.log Transcript started, output file is c:\test.log PS