Lenovo Vibe Z2 Pro getting restart always

Hi
I am using Lenovo Vibe Z2 pro and this phone gets restart automatically regularly. I am getting very fed up and even tried factory data reset but this error is coming again.
Phone automatically goes for shut down and then blue light comes up in LED, I will be honest here and I have mussed atleast four to five meetings by not waking up on time as fone was shutdown automatically.
I am attaching sreenshot of the setting page, please see and let me know the resoltion asap else I might need to switch to any other brand by selling Lenovo.
LINK TO IMAGE
Moderator note: Large image/s converted to link/s About Posting Pictures In The Forums

Hi
Did you had this issue from day 1 ?
Could be a software issue(the OS isn't installed correctly) or may be a hardware issue.
You should take it to a Lenovo service center for a check-up.Your warranty should cover this.
Really sorry about this.
Regards.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Similar Messages

  • Lenovo Vibe Z2 Pro getting restart automatically.

    Hi
    I am using Lenovo Vibe Z2 pro and i have observed from last couple of week this phone gets restart automatically and then it's shows one sign in the top up of the screen, this sign is with the phone and red bubble in the secure icon.
    Can anybody help me to understand and fix this problem ?
    Thanks

    The phone is DSDS(Dual Sim/Dual Standby) not DSFA(Dual Sim/Full active).
    ''If one of your SIMs are in use, the other SIM will automatically be put on hold.'' Put on hold=not available
    ''Could you tell me how i can disable the secure zone ?'' It would be better to put that question HERE.
    Hope this helps.
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Lenovo Vibe Z2 Pro Camera Error Issue

    Hi, I am using Lenovo Vibe Z2 Pro for the past 2 months. Suddenly from Yesterday onwards the camera is not connecting and throw up a message "Camera error - Cannot connect to Camera".
    I tired various options like restart the phone, clear the cache in the app. Nothing Works. Can any one help me to fix this problem. The front camera connects and main camera is showing error.

    Did you restart the device already? If not do so. Did you try a third party camera app? If not dowload from the playstore the goolge camera. Did you try to run the camera in the secure mode? Where all the other apps that might be blocking it are not availavle? Finally, if you properly back up your phone, you can do the factory reset and get it as new from factory. You should find the factory reset in settings somewhere towards the bottom of the options. Be aware all your apps and date will get erased by this, but you will get the phone system as new from the factory.

  • Lenovo Vibe Z2 pro: Screen calibration

    The Lenovo Vibe Z2 Pro has a gorgeous screen, but it is not calibrated optimally. When in the gallery app, the contrast and colour is so much better then in the rest of the UI. To see the difference, compare the wallpaper of the phone and the same picture in the built in gallery. Why can't the screen be awesome all over, and not only in gallery?
    I know we can tweak the display settings in custom mode, but I can't get anything close to the gallery app. Hope the next update fix this.
    Codyjack

    You can see what app drains your batter in "Settings -> Power Manager -> Power consumption details". You can analyze that for a bit and adjust your phone accordingly. Factory reset would delete all third party apps that could drain your batter or readjust the phone settings, but you don't need to do that as long as you can find out what apps are draining your battery. 
    Did someone help you today? Press the star on the left to thank them with Kudos! In Ancient Greek, Kudos is a praise for an exceptional achievement. Why is this terminology used on this forum is beyond me, but the start on the left does the trick.

  • Lenovo Vibe Z2 Pro with no stock Android

    Hello there, I recently bought in China my Lenovo Vibe Z2 pro (K920).It is rooted but not stable many hang ups and resets later I decided to update it.The following update was available. Version number: VIBEU_V2.0_1448_ST_K920_CMCC After this update still a lot of problems so eventually I did a factory reset. Now I have a phone with just the Vibe user interface. I have learned on youtube how to boot the phone in stock android to go into developer mode.But, in developer mode I have no option to switch it to stock android with google play etc. Now I have a beautiful phone but no google play to install whatapp Facebook and other cool apps. How can I make this phone a stock android phone? Thanks in advance, Ger van de Kolk

    gvdkolk wrote:
    Hello Guru,
    One question:
    Since I went to VIBEU_V2.0_1448_ST_K920_CMCC my phone is not connacting to the 3g network.
    Just edge. I refreshed apn restart the phone, no result.
    Is this a result of the update?
    Thanks in advance,
    Ger
    Hi Ger
    The Chinese K920 version is meant to be sold and used only in China with a certain local carrier/provider(That's why it's got the ''China Mobile'' logo on the back).The main difference between the Chinese and the international K920 version is the GSM receiver(hardware difference)....
    .....It seams there is a partial workaround(To make the Chinese version more ''internationally 3G/4G friendly'') but my experience with the Chinese K920 is limited and in this case it would be better to ask the actual users->
    Check out THIS THREAD .
    I can't help you much on this one....Sorry.
     

  • Lenovo Vibe Z2 Pro: wobbly/loose power button

    Solved!
    Go to Solution.

    Hi everyone.
    Its my first time to own a lenovo phone and its my first post also in this forum. Needless to say, i fell in love with the lenovo vibe z2 pro.
    I just have a few concerns:
    1. The power button in my unit is wobbly (at least compared to the volume buttons). Is this normal, and is the case of the users here, too?
    2. There is a little light leak below the capacitive buttons, on the frame connecting the glass. I only notice this if i am in a DARK room when the buttons light up. No dealbreaker for me, but i would just like to know if this is the same as your unit, too?
    The first thing i notice in this forum is that threads are not that organized. With all due respect to the admins, I wish the there were threads under different model names.
    Im sorry if i had to create a new thread for this topic. If already existing, please merge/delete admins.
    Thanks all!

  • Lenovo VIBE Z2 Pro - Original Accessories where to buy?

    Hello, I would like to know where to buy original accessories for Lenovo VIBE Z2 Pro ? I would like to buy 1. Power adapter 2. Car holder & charger 3. Car set 4. Headphones I tried to call support services at Slovakia and Czech republic but unfortunately they offer repair or warranty services but they do not sell accessories. I am not interesting about alternatives from other producers. I am ready to buy worldwide. Thank you.

    K920 does not have multi window??
    K910 has.. 
    how strange is that..

  • Lenovo Vibe Z2 Pro Gold

    Hello,
    I wonder where i can buy Lenovo Vibe Z2 Pro in gold, on flipkart.com they only have it in black and i want it in gold.
    Cheers Jeff.

    You can see what app drains your batter in "Settings -> Power Manager -> Power consumption details". You can analyze that for a bit and adjust your phone accordingly. Factory reset would delete all third party apps that could drain your batter or readjust the phone settings, but you don't need to do that as long as you can find out what apps are draining your battery. 
    Did someone help you today? Press the star on the left to thank them with Kudos! In Ancient Greek, Kudos is a praise for an exceptional achievement. Why is this terminology used on this forum is beyond me, but the start on the left does the trick.

  • Lenovo Vibe Z2 Pro review videos from Youtube

    Hi, guys
    I have collected some Lenovo Vibe Z2 Pro review videos, just share some of them to you Hope you enjoy it.
    Lenovo Vibe Z2 Pro K920 India Hands on Review, Camera, Features, Price, Software and Overview
    http://www.youtube.com/watch?v=l4BLtUpCeYw
    Lenovo Vibe Z2 Pro K920 Quick Review, User Interface, Camera, Price, Bend Test and Overview
    http://www.youtube.com/watch?v=C5L-31gc-uo
    Lenovo Vibe Z2 Pro (Quad HD | Dual Sim | Snapdragon 801) Unboxing
    http://www.youtube.com/watch?v=FXWxI-WUluo

    K920 does not have multi window??
    K910 has.. 
    how strange is that..

  • Lenovo Vibe Z2 Pro lollipop battery drain fast

    Lenovo Vibe Z2 Pro lollipop battery drain fast as hell
    Moderator note: Added text

    You can see what app drains your batter in "Settings -> Power Manager -> Power consumption details". You can analyze that for a bit and adjust your phone accordingly. Factory reset would delete all third party apps that could drain your batter or readjust the phone settings, but you don't need to do that as long as you can find out what apps are draining your battery. 
    Did someone help you today? Press the star on the left to thank them with Kudos! In Ancient Greek, Kudos is a praise for an exceptional achievement. Why is this terminology used on this forum is beyond me, but the start on the left does the trick.

  • Lenovo Vibe Z2 Pro (K920) battery charging time

    Hello everyone,
    I wonder, if anyone could help me, please.
    I'm experiencing an interesting issue related to battery charging procedure of brand-new Lenovo Vibe Z2 Pro (K920).
    The thing is, the first two battery charging procedures took about let say 2 hours 40 minutes both.
    But the third battery charging procedure took about 3 hours and 10 minutes exactly!, which I consider to be rather strange, mostly because of web reviews of this smartphone, where 2 hours and 30 minutes typical charging time is described.
    I understand the fact that brand-new battery has to be initially "formatted" and it's capacity is therefore gradually increasing after few battery charging attempts.
    Needles to say, after that third battery charging procedure, the battery life has been also significantly improved. I use genuine Lenovo charger which comes with the phone in the box. The only thing, which I changed since first two battery charging procedures, was turning ON "Core efficiency" in the Lenovo Battery Manager.
    Could it be the reason of such extended battery charging time or is it perfectly normal bacause of gradually improving capacity for brand-new battery? Could it be defective battery? Has anyone of the owners the same experience or what is yours typical battery charging time using in-box charger?
    Thanks in advance for any advice, suggestion, explanation.
    Martin

    Hi All,
    Thank you for bringing this to our attention.
    I will check the battery charging issue item.
    Hi tedulus, I don't understand what do you mean by the screen being too sensitive.Care to explain a little bit?
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

  • "Secure Zone" is coming in Lenovo Vibe Z2 Pro

    In the incoming Lenovo flagship Vibe Z2 Pro(K920), we are introducing a new feature: Secure Zone
    In order to protect sensitive application & data on the phone, users set up all kinds of lock screen. However, once lock screen is set, user must unlock the phone before using everything, including accessing insensitive app&data.
    Open Zone & Secure Zone
    In Vibe Z2 Pro, we have two zones: open zone and secure zone. Every app can be run in open zone while only trusted app will be run in secure zone to protect sensitive application & data for user. User can easily switch between open zone and secure zone by only "one click".  In secure zone, it is safer, freer and easier.
    How to use "Secure Zone"
    Enable "Secure Zone"
    Confiture "Secure Zone"
    Switch Zone
    Enjoy your safer, freer and easier app runtime in our "Secure Zone" for new flagship Lenovo Vibe Z2 Pro.
    Any comment about "Secure Zone" is welcome. Please feel free to contact us.

    Hi
    Did you had this issue from day 1 ?
    Could be a software issue(the OS isn't installed correctly) or may be a hardware issue.
    You should take it to a Lenovo service center for a check-up.Your warranty should cover this.
    Really sorry about this.
    Regards.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Lenovo Vibe Z2 Pro wireless 802.11ac support

    Does this phone support 802.11ac ? On GSM Arena it sais that its only Wi-Fi 802.11 a/b/g/n but I just cant beleive it doesnt support ac ??!
    Solved!
    Go to Solution.

    Hi Jocky
    Does this phone support 802.11ac ?
    Yes,it does support 802.11ac. Please see the official RS site http://shop.lenovo.com/rs/sr/smartphones/vibe/vibe-z2-pro/#tab-tehničke_specifikacije (Povezivanje/radio tab)
    You could also check a different independent spec site http://www.devicespecifications.com/en/model/e25d2cfd
    On GSM Arena it sais that.....
    That site is a general information site and if you scroll down you'll find a Disclaimer. We can not guarantee that the information on this page is 100% correct.If you think that any information for the current phone is wrong or missing, please contact us.
    As a side note this(see picture) is the average WI-FI speed I get on the K920.Don't know how relevant the image is for you....but WI-FI speed isn't really a problem on the Z2 Pro.
    Hope this helps
    Regards.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Macbook Pro getting restarted of its own....

    Dear Apple Support Team,
    I have a Macbook Pro (2009) running on Mountain Lion OS X. For last few days the Mac I am facing 4 issues with my Mac:
    1. Battery is draining is sleep mode. The system  information shows battery is NORMAL.
    2. Bluetooth sign in Menu bar keeps on toggles between 'Bluetooth Available" and "Bluetooth not Available'
    3. Fan issue very strange. If Mac is on wodden table, fan is normal. If I touch bottom of Mac, the Fan starts ..Any clue?
    4. Mac is getting restarted of it own. Could you please guide me how to resolve it? Below is the error report
    I am sorry to say that ever since my Mac has gone to Apple Store, it has gone cranky. Last month I got the internal speakers changed and after that it is going crazy....
    Below is the error details:
    Interval Since Last Panic Report:  69285 sec
    Panics Since Last Report:          2
    Anonymous UUID:                    A38AA2D3-2DD2-B036-8633-CD771B71DC91
    Sun Aug 18 23:09:33 2013
    panic(cpu 1 caller 0xffffff800f8b8655): Kernel trap at 0xffffff800fbb1e4d, type 13=general protection, registers:
    CR0: 0x0000000080010033, CR2: 0x00000001524f2868, CR3: 0x000000002f823000, CR4: 0x0000000000000660
    RAX: 0xffffff801a020908, RBX: 0xffffff801d701288, RCX: 0xffffff80176a3de0, RDX: 0x0000000000000000
    RSP: 0xffffff80176a3cd0, RBP: 0xffffff80176a3d20, RSI: 0xffffff801d701288, RDI: 0xffffff801eea9088
    R8:  0xffffff80176a3dd8, R9:  0x0000000000000000, R10: 0x0000000000000010, R11: 0xffffff80176a3ea8
    R12: 0x0000000000000001, R13: 0x0000000000000001, R14: 0xffffff802525ee48, R15: 0x0000000000000000
    RFL: 0x0000000000010282, RIP: 0xffffff800fbb1e4d, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x00000001524f2868, Error code: 0x0000000000000000, Fault CPU: 0x1
    Backtrace (CPU 1), Frame : Return Address
    0xffffff80176a3970 : 0xffffff800f81d626
    0xffffff80176a39e0 : 0xffffff800f8b8655
    0xffffff80176a3bb0 : 0xffffff800f8ce17d
    0xffffff80176a3bd0 : 0xffffff800fbb1e4d
    0xffffff80176a3d20 : 0xffffff800fb97ebc
    0xffffff80176a3e10 : 0xffffff800fb7bdf0
    0xffffff80176a3e40 : 0xffffff800fb76f69
    0xffffff80176a3ef0 : 0xffffff800fb76e77
    0xffffff80176a3f50 : 0xffffff800fbe16aa
    0xffffff80176a3fb0 : 0xffffff800f8ce9c3
    BSD process name corresponding to current thread: WebProcess
    Mac OS version:
    12E55
    Kernel version:
    Darwin Kernel Version 12.4.0: Wed May  1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
    Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
    Kernel slide:     0x000000000f600000
    Kernel text base: 0xffffff800f800000
    System model name: MacBookPro5,5 (Mac-F2268AC8)
    System uptime in nanoseconds: 13658870279862
    last loaded kext at 13520914187632: com.apple.iokit.IOBluetoothUSBDFU          4.1.4f2 (addr 0xffffff7f91aa6000, size 12288)
    last unloaded kext at 13000359364740: com.apple.iokit.IOBluetoothUSBDFU          4.1.4f2 (addr 0xffffff7f91aa4000, size 8192)
    loaded kexts:
    com.avast.PacketForwarder          1.3
    com.avast.AvastFileShield          2.0.0
    com.apple.iokit.IOBluetoothUSBDFU          4.1.4f2
    com.apple.filesystems.smbfs          1.8.4
    com.apple.nke.pppoe          1.8
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AGPM          100.12.87
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleHDA          2.3.7fc4
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.4f2
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager          4.1.4f2
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.ApplePolicyControl          3.4.5
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleMikeyDriver          2.3.7fc4
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleBacklight          170.2.5
    com.apple.driver.AppleUpstreamUserClient          3.5.10
    com.apple.driver.AppleMCCSControl          1.1.11
    com.apple.driver.AppleSMCLMU          2.0.3d0
    com.apple.GeForce          8.1.2
    com.apple.driver.SMCMotionSensor          3.0.3d1
    com.apple.driver.AppleUSBTCButtons          237.1
    com.apple.driver.AppleUSBTCKeyboard          237.1
    com.apple.driver.AppleIRController          320.15
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          34
    com.apple.driver.AppleUSBCardReader          3.1.7
    com.apple.iokit.SCSITaskUserClient          3.5.5
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.3.1
    com.apple.driver.AirPort.Brcm4331          615.20.17
    com.apple.driver.AppleEFINVRAM          1.7
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleUSBHub          5.5.5
    com.apple.driver.AppleFWOHCI          4.9.6
    com.apple.driver.AppleAHCIPort          2.5.2
    com.apple.nvenet          2.0.19
    com.apple.driver.AppleUSBEHCI          5.5.0
    com.apple.driver.AppleUSBOHCI          5.2.5
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleACPIButtons          1.7
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.7
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2.1
    com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
    com.apple.nke.ppp          1.8
    com.apple.kext.triggers          1.0
    com.apple.driver.DspFuncLib          2.3.7fc4
    com.apple.iokit.IOAudioFamily          1.8.9fc11
    com.apple.kext.OSvKernDSPLib          1.6
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.4f2
    com.apple.iokit.IOSurface          86.0.4
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.iokit.IOBluetoothFamily          4.1.4f2
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.AppleSMBusPCI          1.0.11d0
    com.apple.driver.IOPlatformPluginFamily          5.3.0d51
    com.apple.driver.AppleGraphicsControl          3.4.5
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.driver.AppleSMBusController          1.0.11d0
    com.apple.driver.AppleHDAController          2.3.7fc4
    com.apple.iokit.IOHDAFamily          2.3.7fc4
    com.apple.nvidia.nv50hal          8.1.2
    com.apple.NVDAResman          8.1.2
    com.apple.iokit.IONDRVSupport          2.3.7
    com.apple.iokit.IOGraphicsFamily          2.3.7
    com.apple.driver.AppleSMC          3.1.4d2
    com.apple.driver.AppleUSBMultitouch          237.3
    com.apple.iokit.IOUSBHIDDriver          5.2.5
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.5
    com.apple.iokit.IOUSBMassStorageClass          3.5.1
    com.apple.driver.AppleUSBMergeNub          5.5.5
    com.apple.driver.AppleUSBComposite          5.2.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.5
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.5.1
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
    com.apple.iokit.IO80211Family          530.4
    com.apple.iokit.IOUSBUserClient          5.5.5
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOAHCIFamily          2.3.1
    com.apple.iokit.IONetworkingFamily          3.0
    com.apple.iokit.IOUSBFamily          5.6.0
    com.apple.driver.NVSMU          2.2.9
    com.apple.driver.AppleEFIRuntime          1.7
    com.apple.iokit.IOHIDFamily          1.8.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          220.3
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          345
    com.apple.iokit.IOStorageFamily          1.8
    com.apple.driver.AppleKeyStore          28.21
    com.apple.driver.AppleACPIPlatform          1.7
    com.apple.iokit.IOPCIFamily          2.7.3
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.26 GHz, 4 GB, SMC 1.47f2
    Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.17)
    Bluetooth: Version 4.1.4f2 12041, 2 service, 11 devices, 1 incoming serial ports
    Network Service: PPPoE, PPP (PPPoE), ppp0
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: Hitachi HTS545032B9SA02, 320.07 GB
    Serial ATA Device: HL-DT-ST DVDRW  GS23N
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 2
    USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24400000 / 2
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x04600000 / 3
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
    I look forward for your expert opinion
    Regards
    Puneet

    Dear Dominic,
    Thanks!
    I tired as you suggested. The battery is not draning anymore but still the mac restarts on its own and also it doesnt go in sleep mode if i click of 'sleep' icon on Apple Tab.
    Latest error report
    Interval Since Last Panic Report:  39141 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    A38AA2D3-2DD2-B036-8633-CD771B71DC91
    Thu Aug 22 00:06:29 2013
    panic(cpu 0 caller 0xffffff80034b8655): Kernel trap at 0xffffff80037f1291, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x00000000471dd000, CR4: 0x0000000000000660
    RAX: 0xffffff8090ebd000, RBX: 0x0000000000000001, RCX: 0xffffff8003a5cba0, RDX: 0xffffff80147f9dc8
    RSP: 0xffffff807c143b40, RBP: 0xffffff807c143b60, RSI: 0x0000000000040004, RDI: 0x0000000000000000
    R8:  0x00000000000001ff, R9:  0x0000000000000000, R10: 0xffffff807bfc6000, R11: 0x0000000000000000
    R12: 0x0000000000000010, R13: 0xffffff8010a99400, R14: 0xffffff8003ae1b20, R15: 0xffffff8014948240
    RFL: 0x0000000000010202, RIP: 0xffffff80037f1291, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x0000000000000000, Error code: 0x0000000000000000, Fault CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff807c1437e0 : 0xffffff800341d626
    0xffffff807c143850 : 0xffffff80034b8655
    0xffffff807c143a20 : 0xffffff80034ce17d
    0xffffff807c143a40 : 0xffffff80037f1291
    0xffffff807c143b60 : 0xffffff80037f14a9
    0xffffff807c143b90 : 0xffffff80037f213d
    0xffffff807c143c00 : 0xffffff80037eef0b
    0xffffff807c143c50 : 0xffffff7f846a2afb
    0xffffff807c143c80 : 0xffffff7f846a2d94
    0xffffff807c143cb0 : 0xffffff7f84694b5a
    0xffffff807c143da0 : 0xffffff800384907a
    0xffffff807c143e00 : 0xffffff8003864f00
    0xffffff807c143e50 : 0xffffff8003495c4c
    0xffffff807c143e80 : 0xffffff8003420b3d
    0xffffff807c143eb0 : 0xffffff8003410448
    0xffffff807c143f00 : 0xffffff800341961b
    0xffffff807c143f70 : 0xffffff80034a6536
    0xffffff807c143fb0 : 0xffffff80034ce9e3
          Kernel Extensions in backtrace:
             com.apple.iokit.IOBluetoothFamily(4.1.4f2)[DDCDB040-B00B-3133-A379-7D8B0DAFA4E8 ]@0xffffff7f8468f000->0xffffff7f84732fff
                dependency: com.apple.iokit.IOUSBFamily(5.6.0)[065077C5-A49E-3C52-BDC0-60169E293563]@0xffff ff7f84222000
    BSD process name corresponding to current thread: blued
    Mac OS version:
    12E55
    Kernel version:
    Darwin Kernel Version 12.4.0: Wed May  1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
    Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
    Kernel slide:     0x0000000003200000
    Kernel text base: 0xffffff8003400000
    System model name: MacBookPro5,5 (Mac-F2268AC8)
    System uptime in nanoseconds: 16412526559412
    last loaded kext at 16405763434881: com.apple.iokit.IOBluetoothUSBDFU          4.1.4f2 (addr 0xffffff7f85694000, size 12288)
    last unloaded kext at 16369000538024: com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.4f2 (addr 0xffffff7f85610000, size 155648)
    loaded kexts:
    com.apple.iokit.IOBluetoothUSBDFU          4.1.4f2
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.4f2
    com.apple.nke.pppoe          1.8
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AGPM          100.12.87
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.AppleHDA          2.3.7fc4
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleBacklight          170.2.5
    com.apple.driver.AppleMikeyDriver          2.3.7fc4
    com.apple.GeForce          8.1.2
    com.apple.driver.AppleSMCLMU          2.0.3d0
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager          4.1.4f2
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.ApplePolicyControl          3.4.5
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleUpstreamUserClient          3.5.10
    com.apple.driver.AppleMCCSControl          1.1.11
    com.apple.driver.SMCMotionSensor          3.0.3d1
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleUSBTCButtons          237.1
    com.apple.driver.AppleUSBTCKeyboard          237.1
    com.apple.driver.AppleIRController          320.15
    com.apple.driver.AppleUSBCardReader          3.1.7
    com.apple.iokit.SCSITaskUserClient          3.5.5
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          34
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.3.1
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleUSBHub          5.5.5
    com.apple.driver.AppleFWOHCI          4.9.6
    com.apple.driver.AirPort.Brcm4331          615.20.17
    com.apple.driver.AppleAHCIPort          2.5.2
    com.apple.nvenet          2.0.19
    com.apple.driver.AppleUSBEHCI          5.5.0
    com.apple.driver.AppleUSBOHCI          5.2.5
    com.apple.driver.AppleEFINVRAM          1.7
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleACPIButtons          1.7
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.7
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2.1
    com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
    com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.4f2
    com.apple.nke.ppp          1.8
    com.apple.driver.DspFuncLib          2.3.7fc4
    com.apple.iokit.IOAudioFamily          1.8.9fc11
    com.apple.kext.OSvKernDSPLib          1.6
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleHDAController          2.3.7fc4
    com.apple.iokit.IOHDAFamily          2.3.7fc4
    com.apple.iokit.IOSurface          86.0.4
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.iokit.IOBluetoothFamily          4.1.4f2
    com.apple.driver.AppleGraphicsControl          3.4.5
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.IOPlatformPluginFamily          5.3.0d51
    com.apple.driver.AppleSMBusPCI          1.0.11d0
    com.apple.nvidia.nv50hal          8.1.2
    com.apple.driver.AppleSMBusController          1.0.11d0
    com.apple.NVDAResman          8.1.2
    com.apple.iokit.IONDRVSupport          2.3.7
    com.apple.iokit.IOGraphicsFamily          2.3.7
    com.apple.driver.AppleSMC          3.1.4d2
    com.apple.kext.triggers          1.0
    com.apple.driver.AppleUSBMultitouch          237.3
    com.apple.iokit.IOUSBHIDDriver          5.2.5
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.5
    com.apple.iokit.IOUSBMassStorageClass          3.5.1
    com.apple.driver.AppleUSBMergeNub          5.5.5
    com.apple.driver.AppleUSBComposite          5.2.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.5
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.5.1
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
    com.apple.iokit.IOUSBUserClient          5.5.5
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IO80211Family          530.4
    com.apple.iokit.IOAHCIFamily          2.3.1
    com.apple.iokit.IONetworkingFamily          3.0
    com.apple.iokit.IOUSBFamily          5.6.0
    com.apple.driver.NVSMU          2.2.9
    com.apple.driver.AppleEFIRuntime          1.7
    com.apple.iokit.IOHIDFamily          1.8.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          220.3
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          345
    com.apple.iokit.IOStorageFamily          1.8
    com.apple.driver.AppleKeyStore          28.21
    com.apple.driver.AppleACPIPlatform          1.7
    com.apple.iokit.IOPCIFamily          2.7.3
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    Kindly suggest if there is any other way?

  • Auto Reboot and blue screen on Lenovo vibe z2 pro (k920)

    Hi!I created a theme en Russian forum, but the problem is not solved. Repair and replacement of the motherboard authorized service center does not solve the problem.The phone automatically restarts randomly about once a day. Some people frequently. Sometimes before restarting the blue LED lights up and a blue screen. Please help us.Lenovo Vibe Z2 PROK920_ROW_S141_150109

    Hello Lenovo team, I have the same issue. Took the phone to the authorized service center in Jayanagar, Bangalore, India. They replaced the display and told me that the issues was resolved. The reason for blue screen and restart was mentioned as overheating due to excessive use of 3G connectivity. I was suggested by the authroized service staff to minimize my 3G connectivity usage. In the process of replacing the display, i am left with no company provided screen guard either. I come back home and the very next day the issue appears again. It restarts with blue screen every 2 minutes. The same way as before. Now the WiFi is permanently disabled as well. Cannot activate the soft button itself from the drop down menu.I am very disappointed. I paid a good price to buy the phone expecting good performance, durability and reliability. I had definitely not expected the phone to have such major functional issues within the first 6 months of purchase. I am only hoping that Lenovo understands the seriousness of the issue and provides me a replacement for the phone. I do have some videos of the issue, if it helps you in resolving the issue.

Maybe you are looking for

  • Need help to Configure FTPS connection for File Sender Adapter

    Hi, I want to Configure, FTPS connection (Secured Connection) for File Sender Adapter. Could anyone please guide me, what Information I require to configure. I just want to know what Information should I request the team inorder the configure FTPS so

  • Error 37- a bad filename or volume name was encountered

    I'm getting this message when trying to few a video clip taken by my camera. The video clip is in My Pictures. The pictures are showing up correctly, and the video clip shows up as "Quick Time Movie". When I click on it to view I get this message. I

  • Running .jar files from Java code

    Hi. I am designing a sort of platform to run some games which are saved in .jar files. Basically this platform is a menu from which the user can select the game which he/she wants to run. It also has the feature of adding new games. Is is possible to

  • Really Slow Broadband Speeds

    Hi, My broadband has been runnng really slowly since wednesday - my usual 4-6Mbps download speed is down to the near 80kbps (!!) - upload speed is around normal, at 0.25Mbps. Here is my ADSL status; ADSL line status Connection Information Line state

  • RPC authentication error.,

    hi guys. well really struggling in configuring the CLUSTER ? i have configure one node in the cluster . when i on to the other and make it join this cluster the error i have is as follows. RPC authentication error. can any one help m e, REGARDS ADEEL