Lenovo VIBE Z2 Pro problems with hearing and camera after updating to android Lolipop

Hello All,
After updating to Android Lolipop three days ago, on my phone occured some problems.
1. The hearing while calling/receiving a call is very low, when the volume is on max. It was extremly high on max volume before the update.
2. Now when I'm using the camera most of the pictures are captured with low quality and not well focused. Around one out of four pictures comes out with good quality and well focused. But I reviewed the settings and tried do switch them all the ways around but the problem still occurs.
Any help will be appreciated! Hopefully the next update will fix these issues.
Regards,
Sava

gvdkolk wrote:
Hello Guru,
One question:
Since I went to VIBEU_V2.0_1448_ST_K920_CMCC my phone is not connacting to the 3g network.
Just edge. I refreshed apn restart the phone, no result.
Is this a result of the update?
Thanks in advance,
Ger
Hi Ger
The Chinese K920 version is meant to be sold and used only in China with a certain local carrier/provider(That's why it's got the ''China Mobile'' logo on the back).The main difference between the Chinese and the international K920 version is the GSM receiver(hardware difference)....
.....It seams there is a partial workaround(To make the Chinese version more ''internationally 3G/4G friendly'') but my experience with the Chinese K920 is limited and in this case it would be better to ask the actual users->
Check out THIS THREAD .
I can't help you much on this one....Sorry.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Sync problems with 3gs and itunes after update iOS 5.0

I am using a Vista PC with iTunes10.5. After updating my 3gs to iOS 5.0 I am not able to sync the phone. iTunes recognizes my iphone and then stays syncing at the backup stage....I deleted all my apps on the phone and deleted previous backups and tried syncing again, but in vain. I am clueless....

I just plugged it into my netbook and its Restoring it on there so thanks, I know I will lose what I never had backed up but just be happy if it works. Fingers crossed this fixes it.
Edit: It didnt work, come up with iTunes isnt connected to the internet then the restore fails

Problem with printing and scanning after updating to Mavericks for my Photosmart C7180

After updating my macbook pro (mid 2009) to Mavericks, I have found that I can only scan to a jpeg2000 and cannot scan as a tiff or jpeg or anyother format. I have followed instructions on troubleshooting and have not been able to make anything work ie scanning from preview etc. I have now uninstalled all the HP software and tried to load it again but software update will not recognise that I do not have the software for my printer. What do I do now?

Hello Cyd23, welcome to the forums!
I understand you're having issues with scanning since you upgraded to Mavericks. I have looked into this concern for you and found that there is no downloadable driver with the full feature software (scanning software) included for the Photosmart C7180 and Mavericks.
However, there are work around options for scanning that may help and work!
Please see this link for the other methods: OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
I hope that helps!
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

I am facing problem with wifi and cellular after update Apple iOS 8.0.2

How can we resolve the issue with wifi and cellular reception after update the iOS 8.2 on iPhone 5s 32 GB

Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost if you do not have backup)
Settings>General>Reset>Erase all content and settings

Problem with Usernames and Workgroupmanager after update to 10.6.4

After the update to SLS 10.6.4 i can´t delete Users in the Workgroupmanager. The login in the Wiki is also out of order: some Usernames will be accepted - some not: "Martin Fuermoos" will be rejected - only the shortname "martinfurmoos" is OK.
????

I am having the same issue.
The issue has effectively crippled our staff who depend heavily upon WIKI for SOP's and Core Business Processes.
Key Symptoms:
1. Some users can log in with 2nd short name; however, several users report that they can only login using their primary short name. --!! We use FirstnameLastname as primary and Firstname.Lastname as 2nd short name. All users are in the habit of using second short name. !! --
2. Some users who can only login using primary shortname no longer have permission to access core work group wiki pages.

Problem with Rescue and Recovery after installing Norton Internet Security 2010

Hi all.
It's my first time in this forum.
I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
The message I get it:
"Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
I tried to close the Norton but I couldn't find how.
Tanks
Doron71

Hi and welcome to the forum,
the reason for this situation is, that the antivir files are protected from being modified.
This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
This will skip the backup of this file and will fix your situation.
Please let me know, if you have covered this.
Cheers

Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

Hi Hanjon!
Here is an article that will help you troubleshoot these purchased apps:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

TS1398 I have problems with my wifi connection after update the ios6 any advice

I have problems with my wifi connection after update the ios6 any advice

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I have problems with my wifi connection after update the ios6 any advice

I have problems with my wifi connection after update the ios6 any advice

Ask your question in an iPAD forum.
This is the OS X Mountain Lion forum.

My macbook pro retina is not working camera after updating Mountain lion.

My macbook pro retina is not working camera after updating Mountain lion.
I have also updated to latest update 10.8.1. Still its the same.

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

Problems with email and SMS after 1.3.5

Let me first say that I love the Pre. Up until this point it has been perfect - I have a replacement, but that is because I dropped it (wrong angle, wrong location, broken screen). However, following the 1.3.5 update I'm now having a fairly important problem with email and sms - I can receive email and messages, but not send them.
I have two email accounts. My personal account is with earthlink. My work account goes through an ISP using the domain name of my employer. I'm not using Microsoft Exchange or Outlook. I have tried deleting and reentering the accounts and that did not work. I can receive messages but get error messages when I try to send.
The same for messaging. I don't use it very often. But yesterday I get a text message and tried to respond and got the error message.
I power the phone off every night because I have a landline and use that as the primary phone at home.
I have been looking around message boards trying to find a fix for this. Has anyone had this issue and resolved it?
Thank you.
Post relates to: Pre p100eww (Sprint)
Message Edited by starburst42 on 01-05-2010 07:06 AM
This question was solved.
View Solution.

I forgot to add that this is a stock Pre. There are no patches or homebrew apps.
Edit:
I found a fix for the email problem, in posts on precentral and this board from a few months ago. The info came up in a Google search, and not searches of the boards, which is kind of frustrating. Here is the info, and the link. I really wish Palm would put info about this work around on their site, or at least make it easy for people to find. The solution is the last message in the thread linked below:
Had the same problem. Checked with Earthlink - no help. Checked with Sprint - no help. Checked with Palm - no help. Here is what finally worked:
Delete the earthlink account and start over. When you do - this is the key - set up the account manually! If you use the Pre defaults and try to change the settings it will not correct the problem. Your settings for outgoing mail must be:
"smtpauth.earthlink.net"
Use Authentication set to "on"
username is your email address
your email password
port set to "587"
encryption "none"
Again, the key is to set up manually.
smtp email fix
Message Edited by starburst42 on 01-06-2010 12:08 PM
Message Edited by starburst42 on 01-06-2010 12:09 PM

Problems with folders and applications after SL upgrade

I purchased Snow Leopard and installed on my Macbook Pro everything ran smoothly and very impressed with the changes and extra storage on hard drive I checked thoroughly to make sure all was working and could not find a single problem I have Final Cut Studio 3, Photoshop CS3, Aperture, Iwork 09 and more and have had no problems at all using them. So....
Then feeling secure with Snow Leopard I installed on my MacPro (in exactly the same way which I had previously done on by Macbook Pro!) which I use for my work which has all of the above applications and all of my important documents, pictures, movies, music etc.
I have 4TB of hard drive split on a RAID set up 1 half is for storage of my footage and editing the 2nd half is everything else including applications.
Once the installation was complete and I started to hear the music and video for OSX it then started to go through to open up a new account as if I had just purchased a new computer and was setting it up for the first time or when you erase and install (my worst fear!)
I then in a panic searched for all of my valuable files or applications which I could not seem to find in any of the usual places where they should have been. Then through spotlight managed to find a file I recognised, here is what I have found and I will try to explain.
What used to be the 1st half of the RAID set up which contained all of the system settings, Library, Music and Applications and for general running the system appears to think this is now not used as the main hard drive but it appears to have all of my applications but I am unable to open any of them as if they are not even there.
The 2nd half which was used only for media storage and editing now has all of its existing files plus a system folder and a whole new user file with an application folder, document, system setting etc.
I have tried to just copy across all of the applications to the new working applications folder but they still don't open
I don't know how to resolve this problem and this is what I need an answer to:
Is there anyway to save these applications by dragging some kind of system preference or Library setting across to the NEW main Hard drive?
Do I need to delete all of the applications and reload them all? - VERY TIME CONSUMING!
Being Mac is there anything easy that would reverse whats happened.
Any help/ advise greatly appreciated. Still in a panic so if I don't make sense please ask me to clarify.

malyckjs wrote:
I have owned a HP Pavilion 330n (AMD Athlon Chip, 512 MB RAM, Win XP; Belkin USB wireless internet connection) for about 6 years now, Its an older computer, but by in large does what have needed it to do. However, software updates and the addition of Norton 360 earlier this year ground it to a halt, so I decided to upgrade to 2GB of RAM (and blow out all of the dust that had accumulated inside the tower) last night. The RAM registered without a problem and the computer was much more responsive; except for getting the beloved 'blue screen of death' within ten minutes of reboot (IRQ_LESS_THAN_NULL problem).
After two hours of these lockups and limited troubleshooting, I decided the software stability warranted using the HP software recovery program, so after using the 'normal' (not destructive) recovery program, I'm now getting the "NTLDR is compressed problem; press CTRL+ALT+DEL to REBOOT" -AND- I don't have an external recovery disk that gets me to an to get MSDOS prompt to try to decompress NTLDR.
Given the system's age, I cannot imagine that I'm the first person to encounter this problem. Any assistance that can be provide is greatly appreciated.
Your hard disk might have gone south (become nonfunctional). Is there a hard disk option in your BIOS?
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Problem with itunes and iphoto after time machine restoration

After an apocalyptic type meltdown in my hardrive the other night, I now have a new one. I have restored as much as I had backed up using time machine when I turned my computer back on for the first time. However in iphoto it lists all the different albums I have, but all the photos come up as grey squares. They are definitely on the computer as you can see them in the iphoto originals folder in the finder window.
A similar problem with itunes. My itunes library is totally blank, with no songs whatsoever. However the songs are there in itunes music folder.
How can I restore everything back to normal?
Matt

Look at Q15 here. http://pondini.org/TM/FAQ.html
There are separate sections for iphoto and itunes.
It has to be so complicated because Apple made TM to do too much and be too many things to too many people.. a horse designed by a committee. It has become flakey in later editions.
If you still have the iMac you can move the files directly from the source.. you don't need to use TM backups at all.

Application problems with pages and numbers after Yosemite install

Since upgrading to Yosemite and updating my applications, I have problems opening some documents in Pages and Numbers and get a message
You need a newer version of Numbers to open this spreadsheet.
I also have 2 icons for Pages? The old icon and the new?
When an upgrade occurs doesn't the old version normally get "absorbed" by the new version?
What do I need to do to resolve this?

There are other problems in Pages and Keynote and Numbers. When you use the Share tool, and choose Open In Another App...... no apps are listed except for iTunes U. This is an error, as there are several apps available on the ipad that open Pages. Also, in the Share tool, if I select Send a Copy, the email option is not available. We have checked with app developers who say they their most recent app version addresses this issue, but it doesn't.
We have tried to erase and reset the ipad, put everything back, and the problem still exists.

Problems with E71 and fearing firmware update

Hello, I currently have a Nokia E71 with phone software version 200.21.118 Installed and here are the following problems that i am facing
I cant install or run java apps anymore and whenever im trying to open a secure page on the internet my phoine locks up
also im having other problems with a few other apps locking up when they go online.
I thought that maybe updating the software will fix the problem
the fear that i have is i payed $700AU for this phone and im scared that updating it would make things worse or fatal
can someone help?
Thanks

I fixed it! After calling Apple support, we tried every kind of reboot you can think of:
command-option-P-R
Command-option-R
Shift key down
unplug
unplug and hold in start button for 30 seconds
Nothing worked. So I was going to take it in to the "Genius" bar, but I tried one more thing. I unplugged everything from the Mac - monitors, USB, ethernet, everything. Rebooted and waited for a minute. I then plugged one of my monitors in and voilá! the progress bar was there. So there you go - good luck!
Dan

Lenovo VIBE Z2 Pro problems with hearing and camera after updating to android Lolipop

Similar Messages

Maybe you are looking for