Lenovo W530 Memory - Crucial or Corsair

Dear Everyone,
I recently purchased a W530. Great Machine. I have a the 2.7 processor (w/boost up to 3.7), FHD Display, K1000M, and 512 GB Samsung 830. Only thing i need is memory and with that I am at a crossroads. I have looked around all of the blogs for a long time and can't find any good advice. I am looking to get 16 gb memory.  I see these two: the crucial and corsair
http://www.crucial.com/store/mpartspecs.aspx?mtbpo​id=03E9F8D4A5CA7304 - $175
http://www.newegg.com/Product/Product.aspx?Item=N8​2E16820233265 - 120$
What do you guys think? I would really appreciate. 
Also let it be noted that crucial is 1.35 V and Corsair is 1.5? I dont know if that matters much.
THanks Everyone!

jane2000 wrote:
eos wrote:
The crucials caused random BSODs for me. I had to get my money back, and buy Samsungs (the same as the Lenovo ships with).  They work with no BSODs.  Crucial will, however, swap the RAM or give money back if you have problems.  Thinking about it, I have been using crucial ram for the last 5 years, and most of the machines (desktops, servers and laptos) have had similar BSODs which I am just now realising may be due to the Crucial RAM.  Don't take just one opinion as gospel though.
Thanks for sharing your experience. Does the Samsung memory have 8GB a piece? I only saw 4GB/piece. I just ordered Corsair 8GBx2 from Amazon. It's temporarily out of stock, and would be ordered soon.
The Crucial modules are in stock on the Crucial website. Use the memory advisor tool and it will show you guaranteed compatible modules.

Similar Messages

  • Lenovo W530/W540 Getting Destination host Unreachable from our Firewall

    Hey Everyone!
    I'm having some bizarre issues with all of my Lenovo W530/W540's.  I'm not sure when the issue started, the first time it was reported to me was around March, and it has been persistant since the issue was discovered.  The issue is that, quite frequently, our Lenovo W530/W540's will get Destiantion Host Unreachable if I run a continuous ping (ping -t ...) to anything outside our firewall.
    I have run a ping to things inside our firewall (other computers/servers, etc.) and they will return good ping until the cows come home.
    However, if I try to ping anything outside our firewall (google.com, google DNS 8.8.8.8, yahoo.com, etc.) about every 30 seconds (every 30-35 returns) it starts returning Destitnation Host Unreachable from our Firewall.  This will last for around 10-25 returns, and then traffic goes back to normal.
    We are a majority Apple Shop, and when I attempt to ping from any Apple on the network, it get fine returns consistently.  I also tried pinging from the few non-Lenovo Windows Machines we have as well (my personal machine which is self-built Windows rig, a couple of windows test machines, and a Windows 2008 Server we have) and they also have consistently good returns as well.
    It is ONLY the Lenovo's that have this problem.  To compound things, they have no issue when they are connected to a different network other than the company network.  This ONLY happens when they try to interact with traffic going THROUGH our Firewall on our company network.  It happens regardless of whether they hardwired or wireless.  Also, during the Destination Host Unreachable moments, Windows does not detect a disruption, it keeps registering good connection.  I do not know how often Windows checks for connection, but these Destination Host Unreachable moments are so quick, I'm fairly certain that Windows can't even detect them.
    Our Firewall is a Linux CentOS server that is running Shorewall Firewall Software.  The Destination Host Unreachable notice is coming from our Firewall directly, not from our ISP, so for some reason, the Lenovo is having a problem talking to our FW.
    We currently only have 3 of these machines in circulation, but its having a pretty big impact on those with the machines, as going to a website is even a chore, as they often get "Page Not Found"  and other errors when they try to load a website.
    I'm a bit stumped, I've never seen a machine act this way where it only has problems on a particular network; usually its a global issue it has with everything.  Any and all help would be appreciated.
    Thanks!
    -Chris

    DNS is set to be automatic, though I did try setting  a permenent DNS server in the IPv4 settings to our local DNS server AND Google DNS, and the issue still occurred.
    The 2 Conflicting firewalls could be it, so I tested that.  I logged into the Local Administrator account on the machine so I could temporarily disable the firewall.  I disabled it, pinged out, and I still get Destination host unreachable, though weirdly, it seems to happen less than when on the other account (only about every 50-60 pings do I get Destination host Unreachable).

  • Buying the right Lenovo w530 for CS5 Master Collection; I should be smarter, but time is an issue!?!

    Hi Everyone
    I'm buying a Lenovo w530 for graphic design and video editing on CS5 Master Collection - the whole package!
    I have various solutions for HD setup, but no knowledge of hardware or setup in general for a complete machine where the various parts complement each other in a way that there is no obvious bottleneck coming up to fast.
    RAID 0 SETUP ON A LAPTOP VERY IMPORTANT???
    I'm following lynda.com for various online lessons as this is not my primary occupation, and one of the instructors stresses the need for a raid 0 setup.
    Having to do this means ordering directly from Lenovo in the US, because they need to install another devise in the machine.
    I prefer not to as I live in Denmark. It's so much easier dealing with local suppliers, and the possibilities that’s already in the machine. I realize that in desktop systems you'll prefer larger solutions with more drives and faster connections. In the Lenovo I’m limited by different setups.
    HARD DRIVE SETUP - SSD or 7200 for OS and then what for working disc???
    Do I really need raid 0 on a laptop for working files (small web videos) or will SSD Sata III do?
    For OS:
    Should I go for a 7200 drive as OS drive and an SSD as secondary drive in the DVD slot via an adapter?
    Or should I go for an SSD drive as OS drive, and also as a secondary drive in the DVD slot. (what sizes should they bee)
    CPU
    Intel Core i7-3820QM 2,7GHz Quad Core (3,7Ghz Turbo)
    Ram
    16 or 32 mb
    Harddisk
    500 GB 7200RPM
    2GB NVIDIA Quadro K2000M + Intel HD Graphics 4000 (Optimus auto-switch)
    CD/DVD
    Serial Hard Drive Bay Adapter III with secondary SSD Sata 3 harddisc, could be something from
    120 GB SSD Intel 520 Series
    160 GB SSD Intel 320 Series
    180 GB SSD Intel 520 Series
    240 GB SSD Intel 520 Series
    480 GB SSD Intel 520 Series
    600 GB SSD Intel 320 Series
    or
    CPU
    Intel Core i7-3720QM 2,6GHz
    Ram
    16 or 32 mb
    Harddisk
    240GB SSD(odd size but thats what it says)
    Videocard
    2GB NVIDIA Quadro K2000M + Intel HD Graphics 4000 (Optimus auto-switch)
    CD/DVD
    Serial Hard Drive Bay Adapter III with secondary SSD Sata 3 harddisc, could be something from
    120 GB SSD Intel 520 Series
    160 GB SSD Intel 320 Series
    180 GB SSD Intel 520 Series
    240 GB SSD Intel 520 Series
    480 GB SSD Intel 520 Series
    600 GB SSD Intel 320 Series
    Back up is intended from the usb 3 port to some disc - haven't looked at it yet.
    FIRST BOTTLENECK?
    I hope my system will recognize the NVIDIA card as a friendly given that’s it’s so much newer than my Master Collection CS5.
    I'm curious as to where in this system the first bottleneck will be when I start working.
    Processor, RAM, Graphics card, hard disc setup
    Can anyone recognize this straight away?
    Does anyone know how the Graphic cards it handles effects in PP?
    I'll be glad for all help I can get BEFORE 1 of Jan where part of my funding vanishes...
    al best and happy holidays to all

    I do not own and have never used a W530, however having played with various laptop and desktop setups running CS5 I have the following to offer you:
    - Suggest the i7-3720QM over the more expensive and ever so slightly faster i7-3820QM CPU
    - Suggest sticking with the K2000M vs. the K1000M with 1/2 the number of cores (you will need to do the ever so common "hack" for Adobe to recognize this GPU; don't worry, this is not a risky step, you simply need to find and delete a text file after installing the software)
    - You can go with either a 7200 rpm boot or SSD choice for the OS / programs; the SSD will perform normal PC chores faster, but the performance level of the boot drive will not impact Premiere Pro as much as the additional drive(s) that you have
    - Suggest you get a third party solution for adding the optical bay 2nd HD (or SSD); I would choose the 750GB Seagate Momentus to insert into it (NewModeUS, eBay sellers, etc.); this will save you a lot of money and will work just fine.
    - In the USA you can request 16GB in 2 sticks so presumably you could expand to 32GB later with minimal cost; do this if you can
    - Suggest start with W530 loaded and configured with Adobe and see if it performs fast enough for you. And, if you want more speed, you could add a USB 3.0 (W530 does not support eSATA like the W520 did) external drive to give you a bit more performance.
    - Of course big, fast, expensive SSDs would be faster (and smaller) for your optical bay and / or USB 3.0 connected drives, but they are very expensive (per GB) compared with 7200 laptop drives and you most likely will be just fine without it.
    I found the link about the guy who purchased a W530 for use on a sailboat, but I see you already found it! (you posted to it).
    http://forums.adobe.com/message/4909480
    Regards,
    Jim

  • Lenovo W530 USB Port

    I am posting this in the hope that some Lenovo employee will see it and finally rectify the absolutely atrocious customer supprt that they have extended to date.
    I bought a Lenovo W530 a while backj, and ordered a USG port at the same time. The USB port came immediately, but the W530 was subjected to a series of 2 week delays (or stalling by Lenovo to be honest), and when it finally came, the power jack that came with the W530 didn't fit the USB port (it has a couple of lugs presumably foir a tighter fit, but the USB port was different). I raised iyt with the Dublin support centre, but again all I got was prevarication and stalling, until eventually they stopped replying. 
    So I have a Lenovo W530 (which has not been the best machine I have ever bought and will be the last from them) and a USB port that cost me £90 but which I have never been able to use.
    Any ideas on how best I can get this rectified?
    Bob

    Hi, Now since windows 7 is officially supplied with Lenovo, when will the right driver for the  Lenovo Enhanced USB Port Replicator and Windows 7  be ready to use?
    Tku

  • Compatible Wireless Keyboard for Lenovo w530

    Hi, I want to buy a wireless Keyboard for my Lenovo W530. I've pre-installed windows 8 and Ubuntu 12.04. I need to use that keyboard in both operating systems. Please suggest some. I already have wireless logitech mouse and it works fine. with regards, Ritam

    Hi there.
    Do be VERY careful about acquiring/using a keyboard from a different system.  You absolutely MUST look up the parts description for each machine and identify the keyboard FRU (Field Replaceable Unit) number.
    If they are identical then.... ok... no problem!
    If they are DIFFERENT then..... DON'T DO IT! They may look identical but they will have something... somewhere.... different!!!! It may be just a screw hole in a different place but it might also be a completely different ribbon cable configuration!!
    The C100 keyboard FRU list (different languages) is at
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-63044
     while the N500 list is at
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70943
    I see the US English FRU is 42T3403 for C100 but 34T7417 for the N500! QED....don't do it! Not compatible!
    Tony

  • Stuck at boot menu - Lenovo W530 Watch

    I have a Lenovo W530 (i7 3720QM, 16GB, NVIDIA Quadro K2000M + Intel HD4000 – auto switching with Optimus, running Win8). I left it on overnight and when I opened it in the morning the display was flickering and going crazy. Turned it off and restarted and it said it was updating but it hung so I rebooted again and got a black screen with a blinking white dash at top left. Subsequent restarts just leave me at the boot menu where it recognises drives/usb but wont read from them.
    I can access bios and I've tried booting from recovery usb, booting from Win8 DVD, booting from DVD with a different HDD and Win 7/8 in the DVD bay, disabling Optimus and flicking through the other graphics options, removing RAM etc. No luck.
    Any ideas on what else I can try?
    Solved!
    Go to Solution.

    Just to update - got it sorted. According to Lenovo technicians it was a failed SSD. They replaced it under warranty and so far it all seems ok. Hats off to them for very fast turnaround and service,

  • Memory settings? Corsair XMS Extreme - Cas Latency: 2-3-2-6 T1

    I've been trying to make sense out of the memory settings in the Bios. I read a bunch of posts but I'm still a little confused...
    Here is my memory:
    2x512Mb DDR400 - Corsair XMS Extreme - Cas Latency: 2-3-2-6 T1
    TWINX1024-3200LLPT
    on MB: K8T NEO-FIS2R
    what should be the settings as well as voltage for this?
    bank interleaving
    burst length
    CAS (CL)
    TRCD
    TRAS
    TRP
    right now I have:
    CAS: 2
    TRCD: 4
    TRP 2
    DDR Volts 2.65
    thanks
    TZ

    I'm running the same memory as you are with a different colored heat spreader, Corsair XMS 3200LL.  My system has worked fine from day one with the standard SPD settings that are 2-3-2-6-1T at the default voltage.  Unfortunately, Corsair is really hit or miss since all the BH5 chips are gone.  Our RAM is built on CH6 chips (assuming v1.2 RAM).  There's a great Athlon 64 Special Report on setting RAM timings for the Athlon 64 on Mushkin's website.  Luckily, I haven't had to change anything, but the article may help you out.

  • FMLE Stability on Lenovo W530

    I just upgraded my PC to a Lenovo W530 with NVIDIA Quadro K100M graphics card (Running Windows 7 Home Premium 64 bit). FMLE is causing Blue Screen crashes after just sitting idle for 5 or 10 minutes. Also causing BS crashes when some FMLE setting are changed such as audio source. Any ideas what might be going on??? Both FMLE 2 and 3 are exhibiting the same issues.

    Just adding some information to my own question. The BS Crashes seem to be due to the driver for the NVIDIA K100M graphics board. I went to the NVIDIA site and downloaded their “ODE” driver (Optimum Driver for Enterprise - Version 320.00) and came to a different result. Now windows sees an issue with the K100M board and turns it off. The result, thought not optimal for other PC uses is that FMLE runs fine without any crashes.
    So my real question is does anybody know anything about compatibility issues between FMLE and the NVIDIA K1000M graphic board/software??? There are several drivers to pick from and i'm wondering if one of them might actually work with FMLE???

  • Lenovo W530 - Stuck at "Loading initial ramdisk" GRUB Discrete graphic

    As in the thread https://bbs.archlinux.org/viewtopic.php?id=146006 (only that I do not have any encryption on my drive) I cannot get my ThinkPad W530 booting (I have installed via EFI) with Discrete graphics mode (set in BIOS). NVIDIA Optimus works with optirun and Integrated graphics works fine but I cannot start with Discrete graphics.
    I want to do this since I cannot connect an external monitor to my computer at all right now (the Mini DisplayPort and VGA adapter are only physically connected to the NVIDIA card). I have tried following several more or less incomplete guides on how to start a second X server with bumblebee but I cannot get those working and do not see two X servers a a good solution. I want a virtual display that spans over two monitors. I tried booting the computer with an Ubuntu Live USB stick and it automatically connected and used both monitors (when I set Discrete graphics in the BIOS) even in the installation process, and I can run games like StarCraft II just fine on my Arch install with optirun (when I set NVIDIA Optimus in the BIOS) so the hardware seems to work just fine.
    When I boot the regular Arch linux kernel (3.17.1-1-ARCH) with Discrete graphics I get to the message "Loading initial ramdisk...", then the screen turns black. My system is using GDM for login and Gnome as window manager.
    I managed to login blindly (not sure if it was through GDM or Ctrl + Alt + F2 since I tried both) during the black screen and execute a command that I later found in my .zsh_history file and I also can see that the drive access led is blinking a while after the black screen so it seems that the system has not hanged entirely. If I disable GDM the screen does not turn black but freezes at the "Loading initial ramdisk..." output.
    My /boot/grub/grub.cfg file is (I am not trying to boot with the linux-ck or linux-rt kernel that I also have installed):
    # DO NOT EDIT THIS FILE
    # It is automatically generated by grub-mkconfig using templates
    # from /etc/grub.d and settings from /etc/default/grub
    ### BEGIN /etc/grub.d/00_header ###
    insmod part_gpt
    insmod part_msdos
    if [ -s $prefix/grubenv ]; then
    load_env
    fi
    if [ "${next_entry}" ] ; then
    set default="${next_entry}"
    set next_entry=
    save_env next_entry
    set boot_once=true
    else
    set default="4"
    fi
    if [ x"${feature_menuentry_id}" = xy ]; then
    menuentry_id_option="--id"
    else
    menuentry_id_option=""
    fi
    export menuentry_id_option
    if [ "${prev_saved_entry}" ]; then
    set saved_entry="${prev_saved_entry}"
    save_env saved_entry
    set prev_saved_entry=
    save_env prev_saved_entry
    set boot_once=true
    fi
    function savedefault {
    if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
    fi
    function load_video {
    if [ x$feature_all_video_module = xy ]; then
    insmod all_video
    else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
    fi
    if [ x$feature_default_font_path = xy ] ; then
    font=unicode
    else
    insmod part_gpt
    insmod ext2
    set root='hd0,gpt3'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 25086a9b-a542-4018-9f71-4f492f09be91
    else
    search --no-floppy --fs-uuid --set=root 25086a9b-a542-4018-9f71-4f492f09be91
    fi
    font="/usr/share/grub/unicode.pf2"
    fi
    if loadfont $font ; then
    set gfxmode=auto
    load_video
    insmod gfxterm
    set locale_dir=$prefix/locale
    set lang=sv_SE
    insmod gettext
    fi
    terminal_input console
    terminal_output gfxterm
    if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=5
    # Fallback normal timeout code in case the timeout_style feature is
    # unavailable.
    else
    set timeout=5
    fi
    ### END /etc/grub.d/00_header ###
    ### BEGIN /etc/grub.d/10_linux ###
    menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-25086a9b-a542-4018-9f71-4f492f09be91' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_gpt
    insmod fat
    set root='hd0,gpt1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 B1C0-6D51
    else
    search --no-floppy --fs-uuid --set=root B1C0-6D51
    fi
    echo 'Läser in Linux linux-rt ...'
    linux /vmlinuz-linux-rt root=UUID=25086a9b-a542-4018-9f71-4f492f09be91 rw quiet
    echo 'Läser in initial ramdisk ...'
    initrd /intel-ucode.img /initramfs-linux-rt.img
    submenu 'Avancerade flaggor för Arch Linux' $menuentry_id_option 'gnulinux-advanced-25086a9b-a542-4018-9f71-4f492f09be91' {
    menuentry 'Arch Linux, med Linux linux-rt' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-rt-advanced-25086a9b-a542-4018-9f71-4f492f09be91' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_gpt
    insmod fat
    set root='hd0,gpt1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 B1C0-6D51
    else
    search --no-floppy --fs-uuid --set=root B1C0-6D51
    fi
    echo 'Läser in Linux linux-rt ...'
    linux /vmlinuz-linux-rt root=UUID=25086a9b-a542-4018-9f71-4f492f09be91 rw quiet
    echo 'Läser in initial ramdisk ...'
    initrd /intel-ucode.img /initramfs-linux-rt.img
    menuentry 'Arch Linux, with Linux linux-rt (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-rt-fallback-25086a9b-a542-4018-9f71-4f492f09be91' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_gpt
    insmod fat
    set root='hd0,gpt1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 B1C0-6D51
    else
    search --no-floppy --fs-uuid --set=root B1C0-6D51
    fi
    echo 'Läser in Linux linux-rt ...'
    linux /vmlinuz-linux-rt root=UUID=25086a9b-a542-4018-9f71-4f492f09be91 rw quiet
    echo 'Läser in initial ramdisk ...'
    initrd /intel-ucode.img /initramfs-linux-rt-fallback.img
    menuentry 'Arch Linux, med Linux linux-ck' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-ck-advanced-25086a9b-a542-4018-9f71-4f492f09be91' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_gpt
    insmod fat
    set root='hd0,gpt1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 B1C0-6D51
    else
    search --no-floppy --fs-uuid --set=root B1C0-6D51
    fi
    echo 'Läser in Linux linux-ck ...'
    linux /vmlinuz-linux-ck root=UUID=25086a9b-a542-4018-9f71-4f492f09be91 rw quiet
    echo 'Läser in initial ramdisk ...'
    initrd /intel-ucode.img /initramfs-linux-ck.img
    menuentry 'Arch Linux, with Linux linux-ck (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-ck-fallback-25086a9b-a542-4018-9f71-4f492f09be91' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_gpt
    insmod fat
    set root='hd0,gpt1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 B1C0-6D51
    else
    search --no-floppy --fs-uuid --set=root B1C0-6D51
    fi
    echo 'Läser in Linux linux-ck ...'
    linux /vmlinuz-linux-ck root=UUID=25086a9b-a542-4018-9f71-4f492f09be91 rw quiet
    echo 'Läser in initial ramdisk ...'
    initrd /intel-ucode.img /initramfs-linux-ck-fallback.img
    menuentry 'Arch Linux, med Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-25086a9b-a542-4018-9f71-4f492f09be91' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_gpt
    insmod fat
    set root='hd0,gpt1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 B1C0-6D51
    else
    search --no-floppy --fs-uuid --set=root B1C0-6D51
    fi
    echo 'Läser in Linux linux ...'
    linux /vmlinuz-linux root=UUID=25086a9b-a542-4018-9f71-4f492f09be91 rw quiet
    echo 'Läser in initial ramdisk ...'
    initrd /intel-ucode.img /initramfs-linux.img
    menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-25086a9b-a542-4018-9f71-4f492f09be91' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_gpt
    insmod fat
    set root='hd0,gpt1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 B1C0-6D51
    else
    search --no-floppy --fs-uuid --set=root B1C0-6D51
    fi
    echo 'Läser in Linux linux ...'
    linux /vmlinuz-linux root=UUID=25086a9b-a542-4018-9f71-4f492f09be91 rw quiet
    echo 'Läser in initial ramdisk ...'
    initrd /intel-ucode.img /initramfs-linux-fallback.img
    ### END /etc/grub.d/10_linux ###
    ### BEGIN /etc/grub.d/20_linux_xen ###
    ### END /etc/grub.d/20_linux_xen ###
    ### BEGIN /etc/grub.d/30_os-prober ###
    ### END /etc/grub.d/30_os-prober ###
    ### BEGIN /etc/grub.d/40_custom ###
    # This file provides an easy way to add custom menu entries. Simply type the
    # menu entries you want to add after this comment. Be careful not to change
    # the 'exec tail' line above.
    ### END /etc/grub.d/40_custom ###
    ### BEGIN /etc/grub.d/41_custom ###
    if [ -f ${config_directory}/custom.cfg ]; then
    source ${config_directory}/custom.cfg
    elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
    source $prefix/custom.cfg;
    fi
    ### END /etc/grub.d/41_custom ###
    ### BEGIN /etc/grub.d/60_memtest86+ ###
    ### END /etc/grub.d/60_memtest86+ ###
    Is the error with GRUB, with the kernel, with the NVIDIA drivers or with Xorg? How can I debug and fix this once and for all?
    UPDATE:
    I have managed to login to the computer when it has reached the black screen via SSH with my phone and got the dmesg output:
    [ 0.000000] CPU0 microcode updated early to revision 0x1b, date = 2014-05-29
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.17.1-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=25086a9b-a542-4018-9f71-4f492f09be91 rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x00000000000bffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cbc6ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cbc70000-0x00000000cbe71fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000cbe72000-0x00000000db14efff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000db14f000-0x00000000db34efff] type 20
    [ 0.000000] BIOS-e820: [mem 0x00000000db34f000-0x00000000df69efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000df69f000-0x00000000df79efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000df79f000-0x00000000df7fefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000df7ff000-0x00000000df7fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000df800000-0x00000000dfffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021dffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] efi: EFI v2.31 by Lenovo
    [ 0.000000] efi: ACPI 2.0=0xdf7fe014 ACPI=0xdf7fe000 SMBIOS=0xdf69e000
    [ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000087000) (0MB)
    [ 0.000000] efi: mem01: type=4, attr=0xf, range=[0x0000000000087000-0x0000000000088000) (0MB)
    [ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000088000-0x000000000009d000) (0MB)
    [ 0.000000] efi: mem03: type=0, attr=0xf, range=[0x000000000009d000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001053000) (15MB)
    [ 0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000001053000-0x0000000002000000) (15MB)
    [ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002f53000) (15MB)
    [ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000002f53000-0x0000000037834000) (840MB)
    [ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000037834000-0x0000000037c12000) (3MB)
    [ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000037c12000-0x0000000093e96000) (1474MB)
    [ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x0000000093e96000-0x00000000c9841000) (857MB)
    [ 0.000000] efi: mem11: type=4, attr=0xf, range=[0x00000000c9841000-0x00000000c9861000) (0MB)
    [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x00000000c9861000-0x00000000cbc5a000) (35MB)
    [ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x00000000cbc5a000-0x00000000cbc70000) (0MB)
    [ 0.000000] efi: mem14: type=0, attr=0xf, range=[0x00000000cbc70000-0x00000000cbe72000) (2MB)
    [ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x00000000cbe72000-0x00000000cc831000) (9MB)
    [ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x00000000cc831000-0x00000000ccce0000) (4MB)
    [ 0.000000] efi: mem17: type=1, attr=0xf, range=[0x00000000ccce0000-0x00000000cccfd000) (0MB)
    [ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x00000000cccfd000-0x00000000cec6f000) (31MB)
    [ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x00000000cec6f000-0x00000000cec70000) (0MB)
    [ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000cec70000-0x00000000cec81000) (0MB)
    [ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000cec81000-0x00000000d0974000) (28MB)
    [ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000d0974000-0x00000000d0986000) (0MB)
    [ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000d0986000-0x00000000d254f000) (27MB)
    [ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000d254f000-0x00000000dac78000) (135MB)
    [ 0.000000] efi: mem25: type=2, attr=0xf, range=[0x00000000dac78000-0x00000000dac82000) (0MB)
    [ 0.000000] efi: mem26: type=3, attr=0xf, range=[0x00000000dac82000-0x00000000db14f000) (4MB)
    [ 0.000000] efi: mem27: type=5, attr=0x800000000000000f, range=[0x00000000db14f000-0x00000000db228000) (0MB)
    [ 0.000000] efi: mem28: type=5, attr=0x800000000000000f, range=[0x00000000db228000-0x00000000db34f000) (1MB)
    [ 0.000000] efi: mem29: type=6, attr=0x800000000000000f, range=[0x00000000db34f000-0x00000000dbef8000) (11MB)
    [ 0.000000] efi: mem30: type=6, attr=0x800000000000000f, range=[0x00000000dbef8000-0x00000000ded9f000) (46MB)
    [ 0.000000] efi: mem31: type=0, attr=0xf, range=[0x00000000ded9f000-0x00000000df3f0000) (6MB)
    [ 0.000000] efi: mem32: type=0, attr=0xf, range=[0x00000000df3f0000-0x00000000df69b000) (2MB)
    [ 0.000000] efi: mem33: type=0, attr=0xf, range=[0x00000000df69b000-0x00000000df69d000) (0MB)
    [ 0.000000] efi: mem34: type=0, attr=0xf, range=[0x00000000df69d000-0x00000000df69f000) (0MB)
    [ 0.000000] efi: mem35: type=10, attr=0xf, range=[0x00000000df69f000-0x00000000df6f0000) (0MB)
    [ 0.000000] efi: mem36: type=10, attr=0xf, range=[0x00000000df6f0000-0x00000000df79f000) (0MB)
    [ 0.000000] efi: mem37: type=9, attr=0xf, range=[0x00000000df79f000-0x00000000df7d7000) (0MB)
    [ 0.000000] efi: mem38: type=9, attr=0xf, range=[0x00000000df7d7000-0x00000000df7ff000) (0MB)
    [ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x00000000df7ff000-0x00000000df800000) (0MB)
    [ 0.000000] efi: mem40: type=7, attr=0xf, range=[0x0000000100000000-0x000000021e000000) (4576MB)
    [ 0.000000] efi: mem41: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
    [ 0.000000] efi: mem42: type=0, attr=0x0, range=[0x00000000df800000-0x00000000e0000000) (8MB)
    [ 0.000000] efi: mem43: type=11, attr=0x8000000000000001, range=[0x00000000f80f8000-0x00000000f80f9000) (0MB)
    [ 0.000000] efi: mem44: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: LENOVO 244759G/244759G, BIOS G5ET92WW (2.52 ) 02/27/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x21e000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    [ 0.000000] 3 base 0C0000000 mask FE0000000 write-back
    [ 0.000000] 4 base 0DF800000 mask FFF800000 uncachable
    [ 0.000000] 5 base 100000000 mask F00000000 write-back
    [ 0.000000] 6 base 200000000 mask FE0000000 write-back
    [ 0.000000] 7 base 21E000000 mask FFE000000 uncachable
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x02b2f000, 0x02b2ffff] PGTABLE
    [ 0.000000] BRK [0x02b30000, 0x02b30fff] PGTABLE
    [ 0.000000] BRK [0x02b31000, 0x02b31fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x21de00000-0x21dffffff]
    [ 0.000000] [mem 0x21de00000-0x21dffffff] page 2M
    [ 0.000000] BRK [0x02b32000, 0x02b32fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21ddfffff]
    [ 0.000000] [mem 0x21c000000-0x21ddfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
    [ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xcbc6ffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0xcbbfffff] page 2M
    [ 0.000000] [mem 0xcbc00000-0xcbc6ffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xcbe72000-0xdb14efff]
    [ 0.000000] [mem 0xcbe72000-0xcbffffff] page 4k
    [ 0.000000] [mem 0xcc000000-0xdaffffff] page 2M
    [ 0.000000] [mem 0xdb000000-0xdb14efff] page 4k
    [ 0.000000] BRK [0x02b33000, 0x02b33fff] PGTABLE
    [ 0.000000] BRK [0x02b34000, 0x02b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xdf7ff000-0xdf7fffff]
    [ 0.000000] [mem 0xdf7ff000-0xdf7fffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x37834000-0x37c11fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000DF7FE014 000024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 0x00000000DF7FE170 0000CC (v01 LENOVO TP-G5 00002520 PTL 00000002)
    [ 0.000000] ACPI: FACP 0x00000000DF7E6000 00010C (v05 LENOVO TP-G5 00002520 PTL 00000002)
    [ 0.000000] ACPI: DSDT 0x00000000DF7E8000 010A68 (v01 LENOVO TP-G5 00002520 INTL 20061109)
    [ 0.000000] ACPI: FACS 0x00000000DF754000 000040
    [ 0.000000] ACPI: SLIC 0x00000000DF7FD000 000176 (v01 LENOVO TP-G5 00002520 PTL 00000001)
    [ 0.000000] ACPI: TCPA 0x00000000DF7FC000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
    [ 0.000000] ACPI: SSDT 0x00000000DF7FB000 000408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
    [ 0.000000] ACPI: SSDT 0x00000000DF7FA000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
    [ 0.000000] ACPI: SSDT 0x00000000DF7F9000 000797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
    [ 0.000000] ACPI: HPET 0x00000000DF7E4000 000038 (v01 LENOVO TP-G5 00002520 PTL 00000002)
    [ 0.000000] ACPI: APIC 0x00000000DF7E3000 000098 (v01 LENOVO TP-G5 00002520 PTL 00000002)
    [ 0.000000] ACPI: MCFG 0x00000000DF7E2000 00003C (v01 LENOVO TP-G5 00002520 PTL 00000002)
    [ 0.000000] ACPI: ECDT 0x00000000DF7E1000 000052 (v01 LENOVO TP-G5 00002520 PTL 00000002)
    [ 0.000000] ACPI: FPDT 0x00000000DF7E0000 000064 (v01 LENOVO TP-G5 00002520 PTL 00000002)
    [ 0.000000] ACPI: ASF! 0x00000000DF7E7000 0000A5 (v32 LENOVO TP-G5 00002520 PTL 00000002)
    [ 0.000000] ACPI: UEFI 0x00000000DF7DF000 00003E (v01 LENOVO TP-G5 00002520 PTL 00000002)
    [ 0.000000] ACPI: UEFI 0x00000000DF7DE000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
    [ 0.000000] ACPI: MSDM 0x00000000DF7DD000 000055 (v03 LENOVO TP-G5 00002520 PTL 00000002)
    [ 0.000000] ACPI: SSDT 0x00000000DF7DC000 000D23 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 0x00000000DF7DB000 000A83 (v01 PmRef CpuPm 00003000 INTL 20061109)
    [ 0.000000] ACPI: DMAR 0x00000000DF7DA000 000080 (v01 INTEL SNB 00000001 INTL 00000001)
    [ 0.000000] ACPI: UEFI 0x00000000DF7D9000 0002A6 (v01 LENOVO TP-G5 00002520 PTL 00000002)
    [ 0.000000] ACPI: DBG2 0x00000000DF7D8000 0000E9 (v00 LENOVO TP-G5 00002520 PTL 00000002)
    [ 0.000000] ACPI: BGRT 0x00000000DF7D7000 000038 (v00 LENOVO TP-G5 00002520 PTL 00000002)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021dffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21dffffff]
    [ 0.000000] NODE_DATA [mem 0x21dff3000-0x21dff6fff]
    [ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880215600000-ffff88021d5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x21dffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0xcbc6ffff]
    [ 0.000000] node 0: [mem 0xcbe72000-0xdb14efff]
    [ 0.000000] node 0: [mem 0xdf7ff000-0xdf7fffff]
    [ 0.000000] node 0: [mem 0x100000000-0x21dffffff]
    [ 0.000000] On node 0 totalpages: 2068202
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 23 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 13950 pages used for memmap
    [ 0.000000] DMA32 zone: 892750 pages, LIFO batch:31
    [ 0.000000] Normal zone: 18304 pages used for memmap
    [ 0.000000] Normal zone: 1171456 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x000bffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcbc70000-0xcbe71fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdb14f000-0xdb34efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdb34f000-0xdf69efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdf69f000-0xdf79efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdf79f000-0xdf7fefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf80f7fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
    [ 0.000000] e820: [mem 0xe0000000-0xf80f7fff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88021dc00000 s86848 r8192 d23744 u262144
    [ 0.000000] pcpu-alloc: s86848 r8192 d23744 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2035861
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=25086a9b-a542-4018-9f71-4f492f09be91 rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7985704K/8272808K available (5381K kernel code, 909K rwdata, 1712K rodata, 1140K init, 1176K bss, 287104K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    [ 0.000000] NR_IRQS:8448 nr_irqs:488 0
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2793.799 MHz processor
    [ 0.000031] Calibrating delay loop (skipped), value calculated using timer frequency.. 5589.41 BogoMIPS (lpj=9312663)
    [ 0.000033] pid_max: default: 32768 minimum: 301
    [ 0.000039] ACPI: Core revision 20140724
    [ 0.009889] ACPI: All ACPI Tables successfully acquired
    [ 0.041073] Security Framework initialized
    [ 0.041080] Yama: becoming mindful.
    [ 0.041501] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.043224] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.044022] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.044030] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.044222] Initializing cgroup subsys memory
    [ 0.044227] Initializing cgroup subsys devices
    [ 0.044229] Initializing cgroup subsys freezer
    [ 0.044231] Initializing cgroup subsys net_cls
    [ 0.044232] Initializing cgroup subsys blkio
    [ 0.044251] CPU: Physical Processor ID: 0
    [ 0.044251] CPU: Processor Core ID: 0
    [ 0.044256] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.044576] mce: CPU supports 9 MCE banks
    [ 0.044587] CPU0: Thermal monitoring enabled (TM1)
    [ 0.044597] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
    [ 0.044696] Freeing SMP alternatives memory: 20K (ffffffff81a02000 - ffffffff81a07000)
    [ 0.047190] ftrace: allocating 20674 entries in 81 pages
    [ 0.055722] dmar: Host address width 36
    [ 0.055724] dmar: DRHD base: 0x000000fed90000 flags: 0x1
    [ 0.055728] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
    [ 0.055729] dmar: RMRR base: 0x000000debba000 end: 0x000000debd0fff
    [ 0.055802] IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
    [ 0.055803] HPET id 0 under DRHD base 0xfed90000
    [ 0.055804] Queued invalidation will be enabled to support x2apic and Intr-remapping.
    [ 0.055890] Enabled IRQ remapping in x2apic mode
    [ 0.055891] Enabling x2apic
    [ 0.055892] Enabled x2apic
    [ 0.055900] Switched APIC routing to cluster x2apic.
    [ 0.056343] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.089389] smpboot: CPU0: Intel(R) Core(TM) i7-3840QM CPU @ 2.80GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.089397] TSC deadline timer enabled
    [ 0.089416] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [ 0.089433] ... version: 3
    [ 0.089434] ... bit width: 48
    [ 0.089435] ... generic registers: 4
    [ 0.089436] ... value mask: 0000ffffffffffff
    [ 0.089436] ... max period: 0000ffffffffffff
    [ 0.089437] ... fixed-purpose events: 3
    [ 0.089438] ... event mask: 000000070000000f
    [ 0.109521] x86: Booting SMP configuration:
    [ 0.109522] .... node #0, CPUs: #1
    [ 0.123229] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.129911] #2
    [ 0.140575] CPU2 microcode updated early to revision 0x1b, date = 2014-05-29
    [ 0.150115] #3
    [ 0.166977] #4
    [ 0.177626] CPU4 microcode updated early to revision 0x1b, date = 2014-05-29
    [ 0.187180] #5
    [ 0.207384] #6
    [ 0.218032] CPU6 microcode updated early to revision 0x1b, date = 2014-05-29
    [ 0.227588] #7
    [ 0.241051] x86: Booted up 1 node, 8 CPUs
    [ 0.241055] smpboot: Total of 8 processors activated (44718.31 BogoMIPS)
    [ 0.248684] devtmpfs: initialized
    [ 0.250902] PM: Registering ACPI NVS region [mem 0xdf69f000-0xdf79efff] (1048576 bytes)
    [ 0.251609] pinctrl core: initialized pinctrl subsystem
    [ 0.251647] RTC time: 16:26:11, date: 10/27/14
    [ 0.251717] NET: Registered protocol family 16
    [ 0.251810] cpuidle: using governor ladder
    [ 0.251813] cpuidle: using governor menu
    [ 0.251841] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.251843] ACPI: bus type PCI registered
    [ 0.251844] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.252033] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.252035] PCI: not using MMCONFIG
    [ 0.252036] PCI: Using configuration type 1 for base access
    [ 0.265514] ACPI: Added _OSI(Module Device)
    [ 0.265515] ACPI: Added _OSI(Processor Device)
    [ 0.265516] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.265517] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.266718] ACPI : EC: EC description table is found, configuring boot EC
    [ 0.270105] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.309157] ACPI: Dynamic OEM Table Load:
    [ 0.309168] ACPI: SSDT 0xFFFF880211C58000 000A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
    [ 0.325525] ACPI: Dynamic OEM Table Load:
    [ 0.325534] ACPI: SSDT 0xFFFF880211D29000 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
    [ 0.338781] ACPI: Dynamic OEM Table Load:
    [ 0.338789] ACPI: SSDT 0xFFFF880211FBC000 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
    [ 0.352988] ACPI: Interpreter enabled
    [ 0.352993] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
    [ 0.352997] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
    [ 0.353007] ACPI: (supports S0 S3 S4 S5)
    [ 0.353008] ACPI: Using IOAPIC for interrupt routing
    [ 0.353019] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.362314] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
    [ 0.362393] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.364496] ACPI: Power Resource [PUBS] (on)
    [ 0.365000] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
    [ 0.365725] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
    [ 0.367751] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    [ 0.367805] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    [ 0.367859] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    [ 0.367910] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    [ 0.367961] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    [ 0.368011] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    [ 0.368064] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    [ 0.368114] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    [ 0.368182] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
    [ 0.368186] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.368265] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
    [ 0.368301] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
    [ 0.368303] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
    [ 0.368305] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
    [ 0.368306] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
    [ 0.368436] PCI host bridge to bus 0000:00
    [ 0.368438] pci_bus 0000:00: root bus resource [bus 00-3f]
    [ 0.368440] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.368441] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.368443] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.368444] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 0.368445] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 0.368446] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 0.368448] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
    [ 0.368449] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.368450] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.368451] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.368452] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.368454] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.368455] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.368456] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    [ 0.368457] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    [ 0.368459] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
    [ 0.368460] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
    [ 0.368466] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 0.368530] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 0.368561] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.368637] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 0.368661] pci 0000:00:14.0: reg 0x10: [mem 0xf4220000-0xf422ffff 64bit]
    [ 0.368730] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.368759] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.368797] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.368821] pci 0000:00:16.0: reg 0x10: [mem 0xf4235000-0xf423500f 64bit]
    [ 0.368896] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.368954] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
    [ 0.368972] pci 0000:00:16.3: reg 0x10: [io 0x5070-0x5077]
    [ 0.368981] pci 0000:00:16.3: reg 0x14: [mem 0xf423c000-0xf423cfff]
    [ 0.369103] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
    [ 0.369120] pci 0000:00:19.0: reg 0x10: [mem 0xf4200000-0xf421ffff]
    [ 0.369127] pci 0000:00:19.0: reg 0x14: [mem 0xf423b000-0xf423bfff]
    [ 0.369135] pci 0000:00:19.0: reg 0x18: [io 0x5040-0x505f]
    [ 0.369194] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 0.369219] pci 0000:00:19.0: System wakeup disabled by ACPI
    [ 0.369256] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.369276] pci 0000:00:1a.0: reg 0x10: [mem 0xf423a000-0xf423a3ff]
    [ 0.369363] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.369389] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.369426] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.369442] pci 0000:00:1b.0: reg 0x10: [mem 0xf4230000-0xf4233fff 64bit]
    [ 0.369514] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.369544] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.369581] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 0.369718] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.369792] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [ 0.369927] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.370005] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.370025] pci 0000:00:1d.0: reg 0x10: [mem 0xf4239000-0xf42393ff]
    [ 0.370111] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.370137] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.370171] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
    [ 0.370322] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.370339] pci 0000:00:1f.2: reg 0x10: [io 0x5068-0x506f]
    [ 0.370346] pci 0000:00:1f.2: reg 0x14: [io 0x507c-0x507f]
    [ 0.370354] pci 0000:00:1f.2: reg 0x18: [io 0x5060-0x5067]
    [ 0.370361] pci 0000:00:1f.2: reg 0x1c: [io 0x5078-0x507b]
    [ 0.370368] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f]
    [ 0.370376] pci 0000:00:1f.2: reg 0x24: [mem 0xf4238000-0xf42387ff]
    [ 0.370419] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.370472] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.370487] pci 0000:00:1f.3: reg 0x10: [mem 0xf4234000-0xf42340ff 64bit]
    [ 0.370507] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
    [ 0.370616] pci 0000:01:00.0: [10de:0ffb] type 00 class 0x030000
    [ 0.370627] pci 0000:01:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff]
    [ 0.370637] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.370646] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.370653] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
    [ 0.370660] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
    [ 0.370746] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
    [ 0.370756] pci 0000:01:00.1: reg 0x10: [mem 0xf3000000-0xf3003fff]
    [ 1.377401] pci 0000:00:01.0: ASPM: Could not configure common clock
    [ 1.377430] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 1.377435] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.377440] pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf30fffff]
    [ 1.377454] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 1.377615] pci 0000:02:00.0: [1180:e823] type 00 class 0x088001
    [ 1.377638] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
    [ 1.377665] pci 0000:02:00.0: reg 0x10: [mem 0xf3a00000-0xf3a000ff]
    [ 1.377889] pci 0000:02:00.0: supports D1 D2
    [ 1.377890] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.384191] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 1.384195] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 1.384198] pci 0000:00:1c.0: bridge window [mem 0xf3a00000-0xf41fffff]
    [ 1.384207] pci 0000:00:1c.0: bridge window [mem 0xf3100000-0xf38fffff 64bit pref]
    [ 1.384435] pci 0000:03:00.0: [8086:4238] type 00 class 0x028000
    [ 1.384618] pci 0000:03:00.0: reg 0x10: [mem 0xf3900000-0xf3901fff 64bit]
    [ 1.385377] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 1.390878] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 1.390887] pci 0000:00:1c.1: bridge window [mem 0xf3900000-0xf39fffff]
    [ 1.391702] ACPI: Enabled 4 GPEs in block 00 to 3F
    [ 1.391749] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
    [ 1.391838] vgaarb: setting as boot device: PCI:0000:01:00.0
    [ 1.391840] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.391841] vgaarb: loaded
    [ 1.391842] vgaarb: bridge control possible 0000:01:00.0
    [ 1.391888] PCI: Using ACPI for IRQ routing
    [ 1.393360] PCI: pci_cache_line_size set to 64 bytes
    [ 1.393563] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
    [ 1.393565] e820: reserve RAM buffer [mem 0xcbc70000-0xcbffffff]
    [ 1.393566] e820: reserve RAM buffer [mem 0xdb14f000-0xdbffffff]
    [ 1.393567] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
    [ 1.393568] e820: reserve RAM buffer [mem 0x21e000000-0x21fffffff]
    [ 1.393651] NetLabel: Initializing
    [ 1.393652] NetLabel: domain hash size = 128
    [ 1.393653] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.393662] NetLabel: unlabeled traffic allowed by default
    [ 1.393685] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.393689] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.396725] Switched to clocksource hpet
    [ 1.400615] pnp: PnP ACPI init
    [ 1.400875] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 1.400878] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
    [ 1.400879] system 00:00: [mem 0x00100000-0xdfffffff] could not be reserved
    [ 1.400881] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
    [ 1.400883] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
    [ 1.400885] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 1.400948] pnp 00:01: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
    [ 1.400954] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
    [ 1.400969] system 00:01: [io 0x0400-0x047f] could not be reserved
    [ 1.400971] system 00:01: [io 0x0500-0x057f] has been reserved
    [ 1.400972] system 00:01: [io 0x0800-0x080f] has been reserved
    [ 1.400974] system 00:01: [io 0x15e0-0x15ef] has been reserved
    [ 1.400975] system 00:01: [io 0x1600-0x167f] has been reserved
    [ 1.400977] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
    [ 1.400979] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.400980] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 1.400982] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.400983] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.400985] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
    [ 1.400987] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.401030] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.401057] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
    [ 1.401080] pnp 00:04: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
    [ 1.401117] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
    [ 1.401508] pnp: PnP ACPI: found 6 devices
    [ 1.408246] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
    [ 1.408283] pci 0000:01:00.0: BAR 6: assigned [mem 0xf3080000-0xf30fffff pref]
    [ 1.408285] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 1.408288] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.408290] pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf30fffff]
    [ 1.408292] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 1.408295] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 1.408301] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 1.408308] pci 0000:00:1c.0: bridge window [mem 0xf3a00000-0xf41fffff]
    [ 1.408313] pci 0000:00:1c.0: bridge window [mem 0xf3100000-0xf38fffff 64bit pref]
    [ 1.408320] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 1.408327] pci 0000:00:1c.1: bridge window [mem 0xf3900000-0xf39fffff]
    [ 1.408339] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.408340] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.408342] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.408343] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 1.408344] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 1.408346] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 1.408347] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
    [ 1.408348] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
    [ 1.408349] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
    [ 1.408351] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
    [ 1.408352] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
    [ 1.408353] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
    [ 1.408355] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
    [ 1.408356] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
    [ 1.408357] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
    [ 1.408358] pci_bus 0000:00: resource 19 [mem 0xe0000000-0xfebfffff]
    [ 1.408360] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed4bfff]
    [ 1.408361] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
    [ 1.408362] pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf30fffff]
    [ 1.408364] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 1.408365] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
    [ 1.408366] pci_bus 0000:02: resource 1 [mem 0xf3a00000-0xf41fffff]
    [ 1.408368] pci_bus 0000:02: resource 2 [mem 0xf3100000-0xf38fffff 64bit pref]
    [ 1.408369] pci_bus 0000:03: resource 1 [mem 0xf3900000-0xf39fffff]
    [ 1.408391] NET: Registered protocol family 2
    [ 1.408550] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 1.408683] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.408851] TCP: Hash tables configured (established 65536 bind 65536)
    [ 1.408867] TCP: reno registered
    [ 1.408875] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.408903] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.408956] NET: Registered protocol family 1
    [ 1.409307] pci 0000:01:00.0: Video device with shadowed ROM
    [ 1.409390] PCI: CLS 64 bytes, default 64
    [ 1.409431] Unpacking initramfs...
    [ 1.456654] Freeing initrd memory: 3960K (ffff880037834000 - ffff880037c12000)
    [ 1.456675] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.456678] software IO TLB [mem 0xd6c82000-0xdac82000] (64MB) mapped at [ffff8800d6c82000-ffff8800dac81fff]
    [ 1.457012] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
    [ 1.457059] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1b
    [ 1.457066] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1b
    [ 1.457072] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x1b
    [ 1.457077] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x1b
    [ 1.457085] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x1b
    [ 1.457092] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x1b
    [ 1.457098] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x1b
    [ 1.457105] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x1b
    [ 1.457147] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 1.457167] Scanning for low memory corruption every 60 seconds
    [ 1.457402] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [ 1.457428] Initialise system trusted keyring
    [ 1.457761] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.458800] zpool: loaded
    [ 1.458802] zbud: loaded
    [ 1.458947] VFS: Disk quotas dquot_6.5.2
    [ 1.458972] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.459072] msgmni has been set to 15747
    [ 1.459118] Key type big_key registered
    [ 1.459270] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.459324] io scheduler noop registered
    [ 1.459326] io scheduler deadline registered
    [ 1.459347] io scheduler cfq registered (default)
    [ 1.459465] pcieport 0000:00:01.0: irq 25 for MSI/MSI-X
    [ 1.459740] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.459753] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.459780] efifb: invalid framebuffer address
    [ 1.459787] intel_idle: MWAIT substates: 0x21120
    [ 1.459788] intel_idle: v0.4 model 0x3A
    [ 1.459789] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 1.460069] GHES: HEST is not enabled!
    [ 1.460132] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.480906] 0000:00:16.3: ttyS0 at I/O 0x5070 (irq = 19, base_baud = 115200) is a 16550A
    [ 1.481036] Linux agpgart interface v0.103
    [ 1.481100] rtc_cmos 00:02: RTC can wake from S4
    [ 1.481222] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 1.481253] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 1.481261] Intel P-state driver initializing.
    [ 1.481419] ledtrig-cpu: registered to indicate activity on CPUs
    [ 1.481599] TCP: cubic registered
    [ 1.481764] NET: Registered protocol family 10
    [ 1.482132] NET: Registered protocol family 17
    [ 1.482732] Loading compiled-in X.509 certificates
    [ 1.482753] registered taskstats version 1
    [ 1.483687] Magic number: 2:127:440
    [ 1.483695] clockevents broadcast: hash matches
    [ 1.483710] pcieport 0000:00:1c.1: hash matches
    [ 1.483810] rtc_cmos 00:02: setting system clock to 2014-10-27 16:26:12 UTC (1414427172)
    [ 1.483917] PM: Hibernation image not present or could not be loaded.
    [ 1.485343] Freeing unused kernel memory: 1140K (ffffffff818e5000 - ffffffff81a02000)
    [ 1.485346] Write protecting the kernel read-only data: 8192k
    [ 1.488857] Freeing unused kernel memory: 752K (ffff880002544000 - ffff880002600000)
    [ 1.490323] Freeing unused kernel memory: 336K (ffff8800027ac000 - ffff880002800000)
    [ 1.500877] random: systemd-tmpfile urandom read with 7 bits of entropy available
    [ 1.502894] systemd-udevd[79]: starting version 216
    [ 1.511492] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    [ 1.513508] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.513799] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.516752] ACPI: bus type USB registered
    [ 1.516776] usbcore: registered new interface driver usbfs
    [ 1.516791] usbcore: registered new interface driver hub
    [ 1.516980] usbcore: registered new device driver usb
    [ 1.517579] sdhci: Secure Digital Host Controller Interface driver
    [ 1.517580] sdhci: Copyright(c) Pierre Ossman
    [ 1.517794] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.517896] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.517906] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
    [ 1.518010] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e823] (rev 5)
    [ 1.518069] SCSI subsystem initialized
    [ 1.518079] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 1.518158] xhci_hcd 0000:00:14.0: irq 26 for MSI/MSI-X
    [ 1.518215] sdhci-pci 0000:02:00.0: No vmmc regulator found
    [ 1.518217] sdhci-pci 0000:02:00.0: No vqmmc regulator found
    [ 1.518225] ehci-pci: EHCI PCI platform driver
    [ 1.518342] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
    [ 1.518499] hub 1-0:1.0: USB hub found
    [ 1.518510] hub 1-0:1.0: 4 ports detected
    [ 1.518776] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.518778] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 1.518958] hub 2-0:1.0: USB hub found
    [ 1.518969] hub 2-0:1.0: 4 ports detected
    [ 1.519036] libata version 3.00 loaded.
    [ 1.519376] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 1.519383] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 1.519397] ehci-pci 0000:00:1a.0: debug port 2
    [ 1.523293] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.523300] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf423a000
    [ 1.528153] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.530239] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.530357] hub 3-0:1.0: USB hub found
    [ 1.530361] hub 3-0:1.0: 3 ports detected
    [ 1.530512] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 1.530515] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [ 1.530528] ehci-pci 0000:00:1d.0: debug port 2
    [ 1.534415] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.534428] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf4239000
    [ 1.543624] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.543867] hub 4-0:1.0: USB hub found
    [ 1.543871] hub 4-0:1.0: 3 ports detected
    [ 1.544002] ahci 0000:00:1f.2: version 3.0
    [ 1.544111] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
    [ 1.544153] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
    [ 1.544155] ahci 0000:00:1f.2: flags: 64bit ncq ilck pm led clo pio slum part ems apst
    [ 1.550818] scsi host0: ahci
    [ 1.551275] scsi host1: ahci
    [ 1.551751] scsi host2: ahci
    [ 1.552085] scsi host3: ahci
    [ 1.552361] scsi host4: ahci
    [ 1.552561] scsi host5: ahci
    [ 1.552602] ata1: SATA max UDMA/133 abar m2048@0xf4238000 port 0xf4238100 irq 27
    [ 1.552605] ata2: SATA max UDMA/133 abar m2048@0xf4238000 port 0xf4238180 irq 27
    [ 1.552606] ata3: DUMMY
    [ 1.552606] ata4: DUMMY
    [ 1.552607] ata5: DUMMY
    [ 1.552608] ata6: DUMMY
    [ 1.837361] usb 3-1: new high-speed USB device number 2 using ehci-pci
    [ 1.870771] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.882191] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.882199] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.892187] ata1.00: ATA-9: INTEL SSDSC2BW240A3L, LF1i, max UDMA/133
    [ 1.892194] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.902211] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.902220] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.912240] ata1.00: configured for UDMA/133
    [ 1.912585] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BW24 LF1i PQ: 0 ANSI: 5
    [ 1.924185] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.926015] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.926024] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.927460] ata2.00: ATA-8: WDC WD10JPVT-08A1YT2, 01.01A01, max UDMA/133
    [ 1.927467] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.929353] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.929362] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.930787] ata2.00: configured for UDMA/133
    [ 1.931112] scsi 1:0:0:0: Direct-Access ATA WDC WD10JPVT-08A 1A01 PQ: 0 ANSI: 5
    [ 1.936614] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
    [ 1.936637] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 1.936640] sd 1:0:0:0: [sdb] 4096-byte physical blocks
    [ 1.936653] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.936655] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.936664] sd 1:0:0:0: [sdb] Write Protect is off
    [ 1.936666] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.936667] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.936684] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.937479] sda: sda1 sda2 sda3 sda4
    [ 1.937778] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.962137] hub 3-1:1.0: USB hub found
    [ 1.962324] hub 3-1:1.0: 6 ports detected
    [ 2.065022] sdb: sdb1 sdb2
    [ 2.065588] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 2.067665] usb 4-1: new high-speed USB device number 2 using ehci-pci
    [ 2.192302] hub 4-1:1.0: USB hub found
    [ 2.192454] hub 4-1:1.0: 8 ports detected
    [ 2.261319] usb 3-1.6: new high-speed USB device number 3 using ehci-pci
    [ 2.344660] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.458157] tsc: Refined TSC clocksource calibration: 2793.661 MHz
    [ 2.461737] usb 4-1.7: new low-speed USB device number 3 using ehci-pci
    [ 2.741966] systemd[1]: Cannot add dependency job for unit httpd.service, ignoring: Unit httpd.service failed to load: No such file or directory.
    [ 2.741977] systemd[1]: Cannot add dependency job for unit [email protected], ignoring: Unit [email protected] failed to load: No such file or directory.
    [ 2.766662] EXT4-fs (sda3): re-mounted. Opts: data=ordered
    [ 2.797195] systemd-udevd[209]: starting version 216
    [ 2.994729] pps_core: LinuxPPS API ver. 1 registered
    [ 2.994732] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
    [ 2.994980] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\_SB_.PCI0.LPC_.PMIO) (20140724/utaddress-258)
    [ 2.994985] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.994991] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPC_.LPIO) (20140724/utaddress-258)
    [ 2.994994] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.994995] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPC_.LPIO) (20140724/utaddress-258)
    [ 2.994997] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.994998] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPC_.LPIO) (20140724/utaddress-258)
    [ 2.995000] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.995001] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 2.995905] PTP clock support registered
    [ 2.996690] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 2.997968] mei_me 0000:00:16.0: irq 28 for MSI/MSI-X
    [ 3.000008] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    [ 3.000009] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
    [ 3.004652] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    [ 3.004707] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
    [ 3.011387] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
    [ 3.011549] ACPI: Lid Switch [LID]
    [ 3.011606] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
    [ 3.011610] ACPI: Sleep Button [SLPB]
    [ 3.011685] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 3.011688] ACPI: Power Button [PWRF]
    [ 3.011823] ACPI: Video Device [VID1] (multi-head: yes rom: yes post: no)
    [ 3.033484] acpi device:0a: registered as cooling_device8
    [ 3.033554] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input5
    [ 3.037383] Non-volatile memory driver v1.3
    [ 3.042174] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
    [ 3.042375] wmi: Mapper loaded
    [ 3.042586] thinkpad_acpi: ThinkPad ACPI Extras v0.25
    [ 3.042588] thinkpad_acpi: http://ibm-acpi.sf.net/
    [ 3.042590] thinkpad_acpi: ThinkPad BIOS G5ET92WW (2.52 ), EC unknown
    [ 3.042591] thinkpad_acpi: Lenovo ThinkPad W530, model 244759G
    [ 3.043058] cfg80211: Calling CRDA to update world regulatory domain
    [ 3.043279] thinkpad_acpi: Unsupported brightness interface, please contact [email protected]
    [ 3.044385] thinkpad_acpi: radio switch found; radios are enabled
    [ 3.044398] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
    [ 3.044399] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
    [ 3.045054] ACPI: Battery Slot [BAT0] (battery present)
    [ 3.046083] thermal LNXTHERM:00: registered as thermal_zone0
    [ 3.046085] ACPI: Thermal Zone [THM0] (48 C)
    [ 3.046124] ACPI: AC Adapter [AC] (on-line)
    [ 3.046223] random: nonblocking pool is initialized
    [ 3.047273] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
    [ 3.050109] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
    [ 3.056235] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc1
    [ 3.056771] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 3.056772] Copyright(c) 2003- 2014 Intel Corporation
    [ 3.056924] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 3.057166] iwlwifi 0000:03:00.0: irq 30 for MSI/MSI-X
    [ 3.058976] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
    [ 3.058992] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
    [ 3.059556] input: PC Speaker as /devices/platform/pcspkr/input/input7
    [ 3.062216] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
    [ 3.065041] AVX version of gcm_enc/dec engaged.
    [ 3.073560] Adding 8388604k swap on /dev/sda2. Priority:-1 extents:1 across:8388604k SSFS
    [ 3.102267] tpm_tis 00:05: TPM is disabled/deactivated (0x6)
    [ 3.105383] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 3.105387] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 3.105388] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 3.105390] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
    [ 3.105491] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
    [ 3.116970] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 3.119500] media: Linux media interface: v0.10
    [ 3.123002] Linux video capture interface: v2.00
    [ 3.126296] iTCO_vendor_support: vendor-support=0
    [ 3.127001] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 3.127038] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 3.127120] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 3.152895] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 3.157388] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2eb)
    [ 3.161446] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input9
    [ 3.161525] usbcore: registered new interface driver uvcvideo
    [ 3.161527] USB Video Class driver (1.1.1)
    [ 3.163015] intel_rapl: Found RAPL domain package
    [ 3.163018] intel_rapl: Found RAPL domain core
    [ 3.174342] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
    [ 3.180951] systemd-journald[183]: Received request to flush runtime journal from PID 1
    [ 3.195849] systemd-udevd[212]: renamed network interface wlan0 to wlp3s0
    [ 3.196309] hidraw: raw HID events driver (C) Jiri Kosina
    [ 3.207108] usbcore: registered new interface driver usbhid
    [ 3.207115] usbhid: USB HID core driver
    [ 3.234434] hid-generic 0003:0765:5010.0001: hiddev0,hidraw0: USB HID v1.11 Device [HID 0765:5010] on usb-0000:00:1d.0-1.7/input0
    [ 3.279807] e1000e 0000:00:19.0 eth0: registered PHC clock
    [ 3.279810] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:96:b3:ae
    [ 3.279811

    According to the wiki adding rcutree.rcu_idle_gp_delay=1 as a kernel parameter should mitigate this:  "NVRM: GPU at 0000:01:00.0 has fallen off the bus."
    https://wiki.archlinux.org/index.php/NV … iled.21.29
    Adding nolapic stops my monitors from going black, but then I only have one cpu core, and probably other problems...

  • Video Capture and recording on Lenovo W530 Thinkpad?

    I am having a very hard time figuring out how to record videos on my Lenovo Thinkpad W530. I know how to change settings and everything, but I do not know how to actually record anything.  Can someone please help me!?!

    What software are you using to do the recording and what type of video are you attempting to record?
    Thinkpad W530, i7-3720QM, 1920x1080 screen, 32GB RAM, dual SSDs (Samsung 830, Crucial M4 mSATA), Quadro K2000M, 9-cell battery, DVD burner, backlit keyboard, Bluetooth, Intel 6300 wireless card

  • Lenovo X240 memory upgrade

    I've updated the BIOS to the one dated 10/07/2015 - I get the same 3-3-1 CMOS beeps.

    Hello all,
    I'm aware of the chipset limitations with these lenovo ultrabooks and the fact they can only have up to 8GB of memory. 
    We bought some high performance memory for the laptop (8GB) for my boss as he will be running some memory intensive applications and the default 4GB won't be enough for him.
    The memory type is PC3L-12800 - DDR3 - We bought Corsair Vengeance memory as it was a compatible part according to Corsair, and I can't see why it wouldn't be a compatible part, but after installing it, I get Beep Code 3-3-1. This suggests System board, or DIMM. I can only assume DIMM, so I remove the RAM and put the old stuff back in and boots fine.
    Is there something on these laptops which means you can only put cheap OEM RAM in, or have they stopped me from even upgrading a 4GB device to 8GB?
    This topic first appeared in the Spiceworks Community

  • Lenovo B590 Memory

    First of all, I hope this is the right section for the Lenovo B series laptops, particularly the Lenovo B590. If it's the wrong place I apologize.
    Does anyone know what RAM is supported in the Lenovo B590? Specifically the 20208 model. I got one of these laptops through my school and it only has 2GB of RAM which simply isn't enough when you are used to a computer rocking 8GB of DDR3 RAM. Does anyone know what the supported RAM specs are for this model Lenovo? I tried to Google it, and I got to Crucials website where they have a set that is 2x4GB, CL11, 1.35v, and 204 pin, which I assumed would be the recommended specs to shoot for, but I wanted to be absolutely positive before I dumped money into some RAM kits.
    Is Crucial the main RAM supplier for these laptops? Also would memory with a different CL work? I use this computer exclusively for school work, so the cheaper the better for this computer (long as it's of good quality). Does it have to be 1.35v RAM or would 1.5v RAM work as well?
    I was searching Newegg and found Crucial 8GB (2 x 4GB) 204-Pin DDR3 SO-DIMM DDR3 1600 (PC3 12800) Laptop Memory Model CT2KIT51264BF160B, CL11, 1.35v for $67.99. Would this type of RAM be suppoprted with this laptop? Looks almost identical in terms of specs to the memory on Crucials website for $22 cheaper. There is even cheaper RAM, but it's 1.5v RAM, and I want to make sure I know what will positively work before I drop the money.
    I'm a noob when it comes to laptop hardware. I've always dealt with desktops. This is the first laptop I've ever owned so I'm learning as I go when it comes to laptop hardware, so any information would be appreciated.
    Thanks!

    Hi Shashi,
    Welcome to Lenovo Community Forums!
    I’m glad to inform you that any RAM/Memory with the specifications provided in the image below will be compatible with the computer.
    Spoiler (Highlight to read)
    Do post us back for further queries.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • New Lenovo W530 SLOW booting

    New W530 Type 2436-CTO with Win 7 Pro, 16gb RAM, 256gb SSD.  This is my second W530
    Problem when I boot is it boots very quickly to the Welcome screen and then instead of going to the Win 7 Home screen, the screen goes dark except for the cursor and stays dark with hard drive activiity for about 45 to 55 seconds before the home screen pops up.  After than the computer runs as normal and very fast.
    Some thing in the boot sequence must be the problem.  I did all the Windows updates, MS updates and Lenovo updates.  I am mainly a  user so any help needs to be specific with detail directions.  Hate to send it back when it all works perfectly except it takes near two minutes to boot.
    Last W530 boot like lightning - Please help me

    When I have had slow booting problems, I have found help via a web search for 'diagnose slow boot times Windows 7', or the like.
    At the stage where you are having the long delay, there should be Event Logs listing how long each step in the boot process is taking, and whether that is a change from the previous time the computer booted.
    Here is a guide I have found helpful:
    http://itexpertvoice.com/home/what%E2%80%99s-taking-so-long-how-to-fight-slow-startup-times-in-windo...
    ^^ It walks you through looking at the Event Logs for particular types of messages, especially related to new delays in startup.
    Hope you find your issue and get it fixed.
    -JV474

  • Another lenovo (W530) doesn't charge a battery

    Hi folks!
    I was a happy owner of brand new W530 machine untill I mentioned that it doesn't charge the battery.
    The machine came to me with 94% charged batt and since then it got to 4% mark.
    Symptoms:
    -Lenovo Power Manager detects the batt, says it's good and charging, doesn't estimate how long it would get to charge it.
    -Windows power manager says "Pluged in, charging"
    -W530 worked perfectly on the batt, I made it to drain the battery by unplugging power cord and running "heavy" applications.
    -The battery indicator on top cover is flashing orange once per second.
    -AC Power source outputs 20.5V, BIOS v.1.08, Lenovo software of the most current versions.
    What I've tried:
    -Uninstalling and reinstalling Lenovo Power Manager.
    -Enabling/Disabling/Uninstalling "Microsoft ACPI - blah-blah"
    -Unplugging power cord and battery, pressing power button for 40 seconds and assebmling all together.
    Any working ideas are wellcome.
    Solved!
    Go to Solution.

    What have happened since my last post:
    Note: Lenovo power manager used to estimate power consumption 60-70W even if W530 in idle state. I thought it's ok, w530 is a powerful machine with 170W AC adapter.
    Lenovo was charging the battery very  slow (estimated 14 hours to full from 40%), with stops.
    I was looking through this forum and desided to check if I have CUDA enabled. I launched GPU-Z and found out that K2000M was suspened. Then device manager showed me troubles with K2000M. I reinstalled it with fresh drivers and rebooted. Despite K2000M was functioning since then, power consumtion is floating between 28-33W (almost idle state) and the battery is being charged like it should (1% per 2-3min).
    Now I may confirm that my lenovo works fine. 
    BTW It's still about 0.35V between first and last battery contacts. Looks like w530 doesn't output charging current if it doesn't detect any battery.
    PS Still no CUDA support

  • Detection Error 2100 - Lenovo X240 with Crucial M500 SSD

    I have a new Lenovo X240 out of the box.  I immediately upgraded with a Crucial M500 SSD 240mb drive.  The computer is running a fresh install of Windows 7 64-bit. The BIOS on the laptop is the most current.  The firmware on the M500 is the most current.  It seems that every several times I start or reboot the system I receive "DETECTION ERROR 2100".  After powering off the machine and powering it on again the computer will boot to Winddows.
    I have seen numerous posts about this issue between Crucial vs. Lenovo.  I've tried every suggested fix to no avail.  I have tried the configuration using an identical, brand new M500 SSD with the same results.  Am I missing something?
    Thanks in advance for your suggestions,.

    Hi Mrtree,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that you are facing the issue with SSD drive on ThinkPad X240.
    Regarding the issue we have got the same thread in the forum, but it is different model.
    I suggest you to chect with the below link to follow the further troubleshooting steps.
    Please click here to visit the page, and proceed with the steps provided in that.
    Hope this helps. Do post back if issue persists!
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for

  • BW Query in CRM Account Fact Sheet : Error

    When selecting a BW query in the account fact sheet : the following error message is shown : "Query can not be loaded (Data Provider "DP_1" : No service-implementation is available)" Do we need to create a web service for this ?

  • Error while running dbca

    While installing Oracle 9i Release 2 on HP-UX 11.11 I got the error "Thrown when the IP address of a host cannot be determined". On refering to documents I tried the hostname and nslookup commands both of which were successful. I ignored the error un

  • Workflow to grant access to each List item based on a column value

    Hi, I have 2 lists Risks and RisksLookup. In Risks, I have Title, Description, service impacted and status columns. In RisksLookup, I have service impacted, AD1, AD2, AD3, AD4 and AD5. I have a requirement where in I have to write a Workflow to provi

  • After upgrade CUOM/SM from 2.1 to 2.3, I cannot launch CUSM.

    Dear Experts. I recently upgraded CUOM with SM in same server from ver 2.1 to 2.3, and changed IP address and Hostname as well. I am new to this Cisco management system, I have a few question and need your help. 1.     After upgrade, do I really need

  • DAC: Failing to connection to INFA Server and INFA Rep Ser

    OBIEE APPPS: 7.9.3 Informatica OS: Windows 2003 DB: Oracle 10gR2 on Windows 2003 Informatica is running without any issues. Successfully restored the repository, make sure to configure the repository server in workflow manager as well. Successfully t