LENOVO Y3000 4CQ Celeron's MATbleepA CD-RW-CW-8124 (SM) not working, Unbale to boot the notebook

Hi,
As per the subject line my laptops CD drive is not working and my system's operating system has just crashed. I had 1 year CCI warranty but it is over. Can anyone tell me the price in Indian or US curency for the new CD RW of the same specification
24x Mat**bleep**a DVD CD RW CW 8124 (SM)
Vivek

the drive shouldn't be expensive, but is difficult to source aftermarket, if you go to the depot they will charge a quotation and labour fee, which is expensive.
So my advice to you is just to get an external dvd burner, if you need to a portable unit get the usb powered slim version, should be pretty cheap.

Similar Messages

Mat****a DVD-RAM drive in Satellite A100 is not working correctly

When I insert any type of disc, the drive lights up, but the system cannot access anything on the disc. I have tried all the fixes that have been shown in the forums but nothing works. The message that I get is : D:/is not accessible. I/O device error. Curiously the only disc that it reads without any problem is the recovery disc. Unfortunately a system recovery did no solve the problem.

Hi there,
if you got still warranty then it would be necessary in your case to bring/send your machine to a local toshiba servicepartner for a hardwarecheckup. But even if you dont have warranty anymore you should do that because your issues sounds like a hardware failure.
If you need some help finding a service partner then I can provide you a link where you can find the nearest one:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
Good luck and nice weekend
Greets

Lenovo AIO C440 - not working infrared remote control

Hello,
is there any hint how to get infrared remote control working for a new C440 model? Tomorrow I will try to measure and/or replace batteries which could be bad. For now it is totally not working.
Another question: the remote should work only within AverMedia TV app or in the whole Windows 8?
Regards,
Zdenek

hi bohdik,
Welcome to the Lenovo Forums.
The IR Windows Media Center remote control is for use with C440 models with optional TV tuner. If you have this model, make sure the TV Tuner driver and the ITE CIR Driver from the lenovo support site are installed under Device Manager (press Windows Key+R then type devmgmt.msc) then follow the Set up a TV signal in Windows Media Center. guide.
Note:
You must have Windows 8 PRO to enable Windows Media Center
See this articles in reference:
How to add Windows Media Center to Windows 8 Pro
How To Install And Set Up Media Center On Windows 8
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Microphone not working Lenovo Y 50-70

Hello,
I updated my windows 8.1 and after the update my built in microphone didn't work any more, in skype recording or in anything that uses the microphone. When i go to sending and tried to test it, it does nothing, like it`s on mute.
The sound meter doesn't move at all, it worked until i updated the Windows and after the update was applied it did not work anymore. i uninstalled the sound card driver and installed it again, and it did not work the speakers work but the mic didnt work, i can not use the mic in skype or any app/program that uses the mic.
Thanks.

Hi Gogox1,
Welcome to Lenovo Community!
As per the query we understood that you are facing issues with microphone not working on your Lenovo Y50-70 laptop.
Please try connecting an external microphone and check for the issue, try to update the drivers from device manager.
a) Press“Windows Logo” + “X”keys on the keyboard.
b)Click on “Device Manager”.
c)Search for the Sound Card from the device list and right click on it and select “Update Driver Software”.
d)Follow the on-screen instructions and complete the installation of the latest driver.
e) If no driver updates are available, you may also search for the updated sound card drivers in the“Drivers” and“DriverStore”folders in the location “C:/Windows/System32” by selecting the option“Browse my computer for Driver Software”.
Click here for the driver.
Hope this helps. Do post back if the issue persists!
Best regards,
Ashwin. S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Lenovo Security Solution FP 5.9.2.5697 and firefox 3.6 + password bank extension not working ?

Hi,
I have a thinkpad T61 with WXP SP3 and I have recently upgraded the finger print software from the UPEK site after selecting the lenovo laptop and it took me to the lenovo support site where I have downloaded the latest finger print sofware protector suite ql and it was working fine recently Until i have upgraded my firefox 3.5 to ff 3.6 to the latest version. I have recently seen my lenovo software not working on the latest firefox 3.6 extension. I have contacted the UPEK guys and they said to contact the lenovo support since I have the customized version of their software which is true. I have tried to install the http://www.upek.com/support/customersupport/techsupport/Topic.asp?ID_Topic=76
and its not working, i get a message that the passwork bank extension do not work with my latest ff 3.6. So please provide me the customized version of the latest password bank FP 5.9.2.5697 extension to use my t61 with the firefox 3.6. Please provide me the update asap after contacting the upek software. Please let me know if you need any details, I hope there are a lot of other customers as well who are facing the same problem as mine, since I have seen many blogs with the same question. So lenovo please help all the customers.

I have exactly installed the extension rite on the releaes day....the one which u have sent but its not working on my system, I have wxp professional edition sp3 + firefox 3.6 + Lenovo security solution FP 5.9.2.5697 downloaded from the lenovo support site. I had it working until I had my firefox upgrade from 3.5.7 to 3.6 recently a week ago. I have upgraded the password bank from the upek site ( the link which u have sent) rite on the release day of the extension which is on the 28th Jan 2010 at around 1:00 PM since I was checking their update site very frequently and I was so happy that they have released the extension for ff 3.6 ..but after installing it dint work, I have to use IE8 which i do not like at all, but I had no choice since my ff 3.6 is not working at all with the upek ff 3.6 extension. When ever I open the ff 3.6 for the first time it says my installed upek extension do not work since its not supported. I am currently checking the lenovo forum and chekcing upek update link ...may be if some one will provide solution to this problem. I am in touch with UPEK tech support guys as well, they said to wait for some more days untill they release the customized extension version for the latest ps ql 5.9.2.5697 version and also doing the lenovo system update regularly twice to see ....if lenovo had released any customized version of the extension for the LSS FP 5.9.2.5697 users. I hope I had given u all the needed information, let me tell u my password bank is 100% legal and from the lenovo site and its absolutely working fine with my ie8 browswer. Let me know if u need any more information. I hope I am clear with my description.

Lenovo Notebook Essential B570e2 some keys are not working

hi can you please help me? I have a Lenovo Notebook Essential B570e2 and its driving me crazy. it has got a bunch of problems but right now the most important problem is that some keys of the keyboard are not working. so im writing this all using on-screen keyboard, its very frustrating and annoying. the keyboard just started messing up all in a sudden a few hours ago. i dont think its because of dirt beneath the keys because yesterday i was watching a video online and typing on the keyboard at the same time. and the sound of the video would extend/freeze some times when i was pressing a key. not sure how to describe it. can someone please help me? thank you!

Hi renanc93,
Welcome to Lenovo Community Forums!
I’m sorry to hear that the Keyboard keys are not working as expected in your B570 Laptop, below are the steps to check the issue in the computer:
Remove the battery and any other peripheral device connected to the computer. Hold the power button for 10 seconds and then connect only the AC Adapter and try to turn ON the computer.
Check if the issue is same in “Safe Mode” – Restart the computer keep tapping “F8” key before the Lenovo Logo appears and select “Safe Mode”.
Also check if any external Keyboard is working as expected with the Laptop if it is working fine, the issue is Hardware related, I would Strongly Suggest Calling Technical Support for Assistance as the issue may be hardware related. Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Hope this helps!!!
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

T400 and the Mat**bleep**a DVA-RAM UJ862A

I purchased a LENOVO T400 on 12/01/08. I downgraded it too XP -SP3. Everything works fine, but I found there is a serial Mat**bleep**a DVA-RAM UJ862A slim installed. This Drive doesn't work fine for me. It is a known issues with the restriction on the regional code. This can you found, only of a couple of two junk DVD Drive worldwide.
The only Drive what I found will be fit on a T400 is a slim line curved Hitachi-LG Data Storage Inc. GSA-4083.
Does anybody know exactly, which DVD Drive will work, on a T400.

What is the model number of your HP notebook?

T61p XP3 with Mat**bleep**a UJ-852 will not read CDs

Got From IBM Certified Used Equipment back in April, and just noticed I can't read CDs. Read alot of problems with the UJ-852 and DVDs, but not the problem I'm (my wife) is having. Machine Type 6457 AK7 with latest BIOS and Controller code. I have the Extended Warranty, but haven't found the right number to call. I can replace the hardware myself, and don't want to send Laptop back.
I sounds as if the Mat**bleep**a hardware has had problems for a while, and I should be able to get some help from Lenovo.
How come they put that drive in there in the first place, knowing it had problems... maybe I wouldn't notice... well, my wife noticed and her temperature is rising fast
Any suggestions??
Regards,
Billl

1-800-426-7378 the DVD should be a CRU so you won't have to send the laptop in
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

Mat**bleep**a UJ-852 issues

I've seen a number of topics of people having disc read issues with the Mat**bleep**a UJ-852 drive and I'm curious if there was ever a firmware update or resolution for the issue.
My drive intermittently reads some cd's and not others, with no rhyme or reason. My warranty is expired so I'm probably screwed but just looking to the community for any help.
Thanks
Homer

The Panasonic drive are notorious for these problems, this is not a firmware problem.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Z61m Mat**bleep**a DVD RAM UJ-850

The DVD/CD Drive from Mat**bleep**a DVD RAM UJ-850, sometimes not at all is producing a Blue Screen Error with the foolowing information : BAD_POOL_HEADER
Technicel Information:
***STOP: 0x00000019 (0x00000020, 0x87505510,0x87505528, 0x1A030001)
Using Lenovos toolbox for testing the DVD üroduced also a blue screen error!
Using the driver dtective give the following information: Error 1327:Invalid Drive
Hope for help.

I found a solution under the following Link, but it is yust for XP user:
http://www.dougknox.com/xp/scripts_desc/xp_cd_dvd_fix.htm
Good Luck
Lutz

Mat**bleep**a DVD-Ram uj-850 ata device

My 300 n100 does not recognize my dvd/cdrw drive. I have looked everywhere for the software to dl for this and cannot find it. The one site I did find it on was only applicable to sony devices and would not download. I also attempted to uninstall the driver and reboot to see if it would dl something newer and it would not. I have looked all over lenovo's website and am not finding anything. Is it always this hard to get a driver update? Is there another driver update I can use besides the Mat**bleep**a one? Does anyone have a website that I can get a dl that will work?
The website I went to was the www.techspot.com/drivers/driver/file/information/8137.
Thank you

Yeah, I know - it's the forum software's built-in smut filter working overtime.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

DVD Burner FIRMWARE Mat**bleep**a UJ8D1

I am having a big problem with my Pavilion g6 laptop running Windows 7 OS.
In my not-so-infinite wisdom I somehow managed to make a mess of the firmware on my
DVD Burner (Mat**bleep**a UJ-8D1) !!!
I know this drive was working okay at Christmas 2012 when I got the laptop but
since then all has gone wrong!!!
Can anyone link me to the FIRMWARE to re-set it back?
Big Kudos to anyone who can !!!
Cheers
Brian

Hi @baldie54 ,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I grasp you are having an issue with the DVD burner. You believe the firmware update was the issue.
You stated it was working fine at Christmas time.
Have you ran The HP Support Assistant to aid with HP updates and resolving issues?
Have you tried Using Automated Troubleshooting (Windows 7) to assist you with this difficulty?
You may wish to try installing the original driver from recovery manager. Using Recovery Manager to Restore Software and Drivers (Windows 7)
If it was working correctly before, you can try a restore back to a known good date.
Using Microsoft System Restore (Windows 7)
You may also consider trying a recovery back to factory. Performing an HP System Recovery (Windows 7).
During this process you will receive an option to backup your personal files to prevent data loss. If you have not already done one, I suggest you do one now.
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
Here is a link to Drivers & Downloads Windows 8.1 Update,where any firmware updates would be found. You will need to input your exact model of G6 and follow the prompts.
You could try redoing the firmware update.
If the issue persist, I suggest contacting HP support for assistance.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region Technical Support Sitemap .
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Mat**bleep**a UJ-841S Firmwrae & Driver updates

I have a Mat**bleep**a UJ -841S CD\DVD RW drive. I am having trouble burniung CDs. Reads CDs fine. Burns and reads DVDs fine. But, I cannot get thru a CD burn without errors.
So, I am troubleshooting and deisre to check and make sure Firmware and drivers are up to date for the drive.
I have searched and I cna find them but, every site requires a purchase.
Can anyone tell me where I can get these freebie? Seems I should be able to get them from manufacturer or tsoshiba but ---- been there and no go.
Any help would be greatly appreciated.
laptop - P105-S6102
Windows XP

The firmware on the drive should be fine. Have you tried burning a CD at 1X speed without anythign running in the abckground? Have you tried media from a different manufacturer? Have you tried using Windows itself to burn the disc ratehr then the software you are using?
What errors are you getting?
This signature left intentionally blank.

Problem with MAT**bleep**A UJ-840D built in COMPAQ PRESARIO V2000

Hi. I am getting problems with the mat**bleep**a UJ-840D drive built in my laptop. I can watch DVD movies but cannot read, use or burn any CD discs.
I tried to upgrade the firmware version to solve the issue but the application does not work. The software is: FIRMWARE UPGRADE GCC4243N CDRW DRIVE (directly downloaded from HP web site). I select the file: "s5hp108.DLD" and when I hit the "FW Flashup" button, it brings error: "THIS PROGRAM CANNOT BE USED FOR THE SELECT DEVICE". (MAT**bleep**A UJ-840D - 1.02".
The currently drive installed is: Driver provider: Microsoft / Date: 01/07/2001 / Version: 5.1.2535.0
I think the CD/DVD writer drive must be ok because it works with DVD discs. I have tried with a lot of types and branch of CD discs, but not of them can be read.
If I can to be enabled to make an driver or firmware upgrade, or both, maybe it can be solved.
Thanks.

1-800-426-7378 the DVD should be a CRU so you won't have to send the laptop in
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

Mat**bleep**a DVD problem

Hi,
I have a Toshiba equium psaaqe vista laptop it has a mat**bleep**su DVD drive. All of a sudden it stopped working, it wont read or write or recognize any CD DVD. I have researched the problem and the nearest I can get to a solution can be found here. http://support.microsoft.com/kb/929461/en-gb
Problem is I can't locate default data value DVD/CD-rom and the class data value cdrom? As this is alphabetical it seems its not on my system. And as the CD drive isn't’t working I can't reformat any ideas solutions much appreciated.
Cheers
haggisok

So no replies surprise surprise! I have trolled the internet and find lots of mat**bleep**a DVD problems, I also note many complaint's regarding Toshiba support. All I can say is I will never ever buy a Toshiba product again. My equium failed after I removed the tempro product support program, Toshiba sent me an email informing me my hard drive was over 50% full buy a new laptop, it then suggested a model costing over £1000. I concluded that the program was there to spy rather than help its customers. Toshiba got my money and ran off like a thief in the night!

LENOVO Y3000 4CQ Celeron's MAT**bleep​**A CD-RW-CW-8​124 (SM) not working, Unbale to boot the notebook

Similar Messages

Maybe you are looking for

LENOVO Y3000 4CQ Celeron's MATbleepA CD-RW-CW-8124 (SM) not working, Unbale to boot the notebook