Lenovo y40-70: Multiple issues with GPU :-( advice with at least one will be great help

Hi As you can see below, I am running battlefield 3. The AMD switchable graphics setting for battlefield 3 is set to High performance. So it the game should be running on AMD GPU. But As I have indicated the AMD GPU readings don’t show any value, so it not rendering game. Moreover, in the task bar it show Intel GPU is turned on. Game setting are set to Maximum. Also, the game run little (playable) slow. 1. Does this mean AMD GPU is dead chip? My ultimate intention is to disable the Intel GPU, preferably through BIOS.2. How to do this?Then use AMD GPU for Chrome. I want more performance with Chrome, battery n power is not an issue. But in catalyst application list, I cannot change the setting to high performance, it’s locked. 3.how can I over-ride this setting and run chrome with AMD GPU hardware acceleration -Bluemoon

Hi guys!
in addition
This may not be possible "My ultimate intention is to disable the Intel GPU" Since the unit is limited to Auto-switch between the GPUs or IGP only.
The main concern Im seeing here is that it is not doing the auto switch.
Here's what you can try:
Open Device Manager and Uninstall the Intel GPU, right click > Uninstall make sure to place a check under delete driver software for this device. Restart if prompt.
After the restart, Open Device manager again and verify if the Intel GPU turned into Standard VGA, If not perform another Uninstall to it.
Perform the same with the AMD Graphics. This is to ensure that both GPU is on its most basic driver before we install a new one.
Install the Intel Driver first https://download.lenovo.com/consumer/mobiles/4eiv01ww.exe
Restart if prompt.
Install the AMD last https://download.lenovo.com/consumer/mobiles/4eam01ww.exe
Restart if prompt.
Now try the Auto switching with your tools.
Let me know if this works for you.
Regards
Solid Cruver

Similar Messages

Minor keyboard issue with new 15" MBP - will genius bar help me?

I bought a new 15" 2.67GHz MacBook Pro last Thursday and I noticed that the F11 key is slightly crooked and not level. I am certain there was no abuse to the computer, it's like my baby and I know nothing happened to it. If I take it to a Genius Bar, would they help me out? It doesn't really bother me all too much and the key works fine, but I'm just pi--ed that I spent over $2500 on a computer and the buttons aren't on perfectly. I would have taken it in right away but I bought it Thursday night right before they closed and I left for vacation the next morning. I will not be back until August 9 and I am concerned that if I wait that long, they will not believe me that it was like this when I bought it and will think that I did this. Do you think they would help me? How should I proceed?
Thanks!
Mike

Take it back. They will replace the key or keyboard, if needed.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

Multiple Issues with Adobe Creative Cloud app.

I'm having multiple issues with the Adobe Creative Cloud app.
1. Neither Photoshop CC nor Prelude CC get past the 47% mark when installing. They constantly give me "Installation Failed" messages. When I click on "Learn More", I'm told that:
"Installation Failed
Errors during Installation.(7)
More Information"
So naturally, I click on More Information to get the following thrown at me (none of which I understand):
Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 2 error(s) ERROR: 12/01/13 13:16:06:425 | [INFO] | | OOBE | DE | | | | 6076 | ---------- CustomHook_Helperx64 ---- Start ---------- 12/01/13 13:16:06:426 | [ERROR] | | OOBE | DE | | | | 6076 | Cannot load function name 'CSInstallerCustomHookProc' from library C:\Program Files (x86)\Common Files\Adobe\Installers\uninstall\{5F816B76-62F3-41C9-B651-27F49F25F50B}.data. Error 0 ERROR: System check returned with error : -4 -------------------------------------------------------------------------------------
2. I installed Lightroom 5, then uninstalled it. When I went back to re-install it, the Adobe Creative Cloud app wouldn't let me. It states that my Lightroom 5 is "Up to date" and is in my "Your Apps" section, not in the "Find New Apps" section. I've double checked my Programs and Features in Control Panel, and it's not there. I cleaned my registry, and it's still there. I deleted the "opm.db" file in my OOBE folder, and restarted CC - still nothing.
I've got to say, guys. I'm not very happy with the amount of time I've spent just trying to install programs on my PC. While the plan is for this to be intuitive at some point, it's not very functional at the moment. Any help you can provide me would be amazing - if you can provide it sooner than later, I'd be over the moon.
Thanks.

I fixed it. I fixed it on my own. My journey took over a week (forty hours of back and forths, trial and error, and service!!) and included multiple calls, multiple online chats, unanswered forum posts, Twitter conversations with the Adobe Customer Service team, remote access sessions with Adobe technical teams, and finally this series of emails. In the end, I had to figure it out myself. I'm not happy - not with the time it took, and not with the level service I received based on the urgency that I made clear.
For anyone else that had this issue (or similar), here is what I did to fix it. This may seem excessive, but that's because I didn't know what else to do. Some of these steps may be redundant, or not required... but I wouldn't know because once I saw that it was working, I just kept going.
Anyway, here is the solution I came upon (I'm running Windows 7 64-bit):
1) I uninstalled every single Adobe product (including Flash Player, Acrobat Player, Air, and Digital Editions).
2) I ran the Cleaner Tool (which is not very good) and came across errors in trying to delete certain folders.
3) I restarted my computer in Safe Mode, and logged into Windows 7 under my Administrator account.
4) I manually went into every folder that contained the words "Adobe" and deleted everything. This includes my Program Data folder, my Program Files folders (both x86 and 64-bit), my AppData folders, my Roaming folders, my Temp folders - ANYTHING and EVERYTHING that contained any trace of Adobe, I deleted.
5) I ran Microsoft Disk Cleanup and Piriform CCleaner to clean my registry and temp files.
6) I restarted my computer using the normal boot process and logged into Windows as Administrator.
7) I downloaded the Adobe Creative Cloud installer.
8) I restarted my computer again, and logged into Windows as Administrator.
9) I ran the Creative Cloud installer, and installed Premiere Pro.
10) I restarted my computer again, and logged into Windows as Administrator.
11) I ran the Creative Cloud installer, and installed Photoshop.
12) I restarted my computer again, and logged into Windows as Administrator.
13, 14, 15...) I ran the Creative Cloud installer and installed whatever programs I needed, then I IMMEDIATELY restarted my computer before installing anything else.
Hope this helps. Good luck!

After installing 2014.3 my site had multiple issues with Google Chrome

After installing 2014.3 my site had multiple issues with Google Chrome. After I rebuilt the home page in 2014.3 the site is still not well. With the old software the site worked well with all the browsers and loaded incredibly. Despite Adobe's claim of a faster load with the new software it is much slower and in Chrome at times it won't load up at all.
The home page had two "Video-Animation light box galleries" by Visual pictures company. One had 12 videos, the other 3 videos. All the videos were streamed from Vimeo. There was also an Edge Animate animation in the middle of the page imported as a .oam file. the rest of the page was nothing special except using some web fonts. Again, these elements worked together well before the update.
After the update everything loads slower in all browsers and in Chrome all types of weirdness happened. Videos would play randomly, all of the audio from all the videos played as the site loaded. Videos would play in the wrong place. Instead of my animation playing a video from the galleries played in it's place instead.
I rebuilt most of the home page using a new video gallery and that helped some what but when I placed the animation.oam file in the page had new issues. To survive, I've taken the Animation out which helped but the functionality is still far from being acceptable. My boss is un my backside, other work is not getting done the stress level is through the roof because I was the one who encouraged using all these new Adobe tools (which I'm paying for personally). Now you broke it with a new update. This is not the first time I've been caught out with problems with updates. I couldn't use SpeedGrade for months following an update. ADOBE MUST VET THEIR

Sorry,
It was slated to go to the Creative Cloud - Muse area. How it got to Photoshop is beyond me.
Bob

I am having multiple issues with syncing my iphone calendar and outlook There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone I mostly enter items on my laptop

I am having multiple issues with syncing my iphone calendar and outlook calendar on my laptop
I mostly enter the original items on my laptop
There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone

This sounds like an error in Time Zone support. The time zone needs to be the same in Outlook as well as the phone.

I cannot install properly my CS6 version on a second computer it seems that there is an issue with serial number I will appreciate some guidance thank you

I cannot install properly my CS6 version on a second computer it seems that tree is an issue with serial number I will appreciate some guidance ? thank you

Hello,
please have a look there: http://www.adobe.com/products/cs6/faq.html >>> Can I distribute a Creative Suite 6 edition across multiple users or computers? >>> The software license agreement accompanying your product may entitle you to install and activate the software on two systems with certain restrictions. The product license agreement for Creative Suite 6 does not allow you to install the components of a single suite edition across multiple computers. See the software license agreement for more information.
It could be necessary to activate/deactivate please have a look there:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
Good luck!
Hans-Günter

We use dial up and upon updating to Firefox 10 we have had issues with facebook/ playing games...please help!

We use dial up and upon updating to Firefox 10 we have had issues with facebook/playing games...please help!

Hi nancybrendel,
Have you looked at the Knowledge Base article [[Problems using Facebook in Firefox]]? There is a lot of good troubleshooting information in there. Please be sure to try all of the suggested steps. Each one is valuable and may be the answer to your issue.
Hopefully this helps!

HT1338 I have a macbook Pro i7 mid november 2010. I am wondering if i can exchange my notebook with the latest one. Can anyone help me out with this query please.

I have a macbook Pro i7 mid november 2010. I am wondering if i can exchange my notebook with the latest one. Can anyone help me out with this query please.

You can sell your existing computer using eBay, Craigslist or the venue of your choice. You could then use the proceeds to purchase a new computer.

Multiple issues with apple devices.

First up is my iPhone 5. The major issue with it is that it cannot text anyone no matter what. I have reset the network settings multiple times but to no avail. I have even tried iMessage but that is only a temporary fix, as it doesnt allow me to text people without an iPhone. Secondly, it fails most of the time to connect to the 2.4GHz signal coming from my router, however, the 5GHz signal is proving to have much better results, but i cannot connect to it at all times, as the 5GHz signal cannot reach my room.
The second issue is my iPad 2. This device straight up wont connect to either signal, despite not only a network reset, but many factory resets.
I have heard of other devices in my house not having a great connection, namely my mothers MacBook Pro, but this is only the case with apple devices.
I am fairly certain my iPhone is under warranty, so is it possible to get a replacement, or will the current one be fixed.
Any insight or advice is greatly appreciated.

RoyalRice wrote:
I am fairly certain my iPhone is under warranty, so is it possible to get a replacement, or will the current one be fixed.
Any insight or advice is greatly appreciated.
Did you reset the router? Is the wifi signal coming from the router? Since multiple devices are having problems connecting to your wifi, the problem might be there and not on the devices.
I would check that first. If that does not solve the problem, then take the iPhone to an Apple store or authorized service center.

Multiple Issues with iTunes on New iMac

Hello Apple Community,
I recently bought a 27" iMac with 3.1Ghz i5 processor running on Snow Leopard and finally set it up. I have owned many Macs in the past and currently have been using a 5 year old 15" MacBook Pro on Snow Leopard that has been running flawlessly but I needed something with a bit more processing power. When I first took my iMac out of the box I went ahead and used the Migration Assistant to move my applications and files over from my MacBook Pro but after multiple attempts I had to stop and simply move the music, document, and photo data on to a portable hard drive while I got the Migration Assistant to move the applications. I simply moved the old iTunes music folder over to my new iMac and replaced the iTunes folder on my iMac. The new iMac has already been authorized through my iTunes account and the music will play. Now here are my current issues.
When I play a song on iTunes, there appears to be a random amount of fade-in and/or crossfade when I switch playing songs. I have checked the playback preferences and crossfade is not checked. Some songs the crossfade will take a second while sometimes it will be as much as 10 seconds of crossfade. On my MacBook with the identical library and settings, it does not have these issues.
The other issue I have been experiencing is if iTunes has been open and my computer sits for a little while (usually after awaking from sleep or even listening to a few songs without touching the keyboard, the songs will stop playing on their own and when I press the play button, it begins to "play" the track but there is no sound coming from iTunes. I have checked the volume slider in iTunes and it is still at max volume while all other applications still work and output sound. iTunes will only work properly if I close it and re-open it.
The final issue is similar to the last one in that when I try and play previews in the iTunes Music store it will not play but when I hit the play button iTunes will then appear to be "playing" but no sound from either the store or any of my songs from the Library.
iTunes works perfectly fine on my MacBook Pro and it does have any of these issues. Both Macs are currently running iTunes 10.4.1. All songs in each library are checked and will play to a degree.
I have deleted iTunes and all corresponding library files, (basically anything with iTunes in the name) and tried to reinstall iTunes and used multiple methods to replace the music files including using Home Sharing, a portable Hard Drive, and dragging and dropping the music files from the shared folder and no matter what I try, I still cannot get iTunes on my iMac to work properly. I have been searching around the support forums for others who might have had this issue but I cannot seem to find much. Any help would be greatly appreciated!

I had not tried that before, but from your suggestion, I went ahead and did it and it seems to have gotten rid of the crossfade issues I was experiencing but whenever I try and listen to a preview in the iTunes music store it still does not appear to be working. Also, I was testing a number of tracks and it seems like there are a few tracks in particular that will make iTunes stop playing when I click on them and then if I attempt to play something else, iTunes says it is playing but no sound is coming from it.
What I have found that is interesting is the first time I ran the Disk Utility it repaired a HUGE number of misc. files. After running it and still experiencing problems I tried to run it again but this time the files were not as numerous and were all within the /Library/CoreServices menu. Each subsequent time I ran the Disk Utility and rebooted, I tried to run the Disk Utility again and the same files seem to still be having the same issues. This is just an example of one of the files I have been having an issue with.
Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_TW.lproj/RemoteDesktopMenu.nib" , should be drwxr-xr-x , they are -rwxr-xr-x .
Repaired "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_TW.lproj/RemoteDesktopMenu.nib" .
One in particular gave me a Warning and said it could not be repaired. I'm not sure if it is important to repair but I still seem to be having some issues here and there. Here is the message from the Disk Utility regarding the file in question.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.

Lenovo Flex2 15: NetworkManager issue with WiFi in Gnome3 & battery

I've installed Arch on a Lenovo Flex2 15 and most of the things are working nicely. However 1 issue with NetworkManager is driving me nuts.
I have the following system in use:
Gnome 3.14.1 overview:
Memory 7.7GiB
Processor Intel Core i3-4010U CPU @ 1.70GHz x 4
Graphics Intel Hasswell Mobile
Base system Arch Linux 64-bit
Disk 329.0GB
[dennisf@hossman ~]$ uname -a
Linux hossman 3.16.4-1-ARCH #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014 x86_64 GNU/Linux
[dennisf@hossman ~]$ screenfetch
-`
.o+` dennisf@hossman
`ooo/ OS: Arch Linux
`+oooo: Kernel: x86_64 Linux 3.16.4-1-ARCH
`+oooooo: Uptime: 1h 39m
-+oooooo+: Packages: 765
`/:-:++oooo+: Shell: bash 4.3.30
`/++++/+++++++: Resolution: 1920x1080
`/++++++++++++++: WM: GNOME Shell
`/+++ooooooooooooo/` WM Theme: Adwaita
./ooosssso++osssssso+` GTK Theme: Not Found [GTK2], Not Found [GTK3]
.oossssso-````/ossssss+` Icon Theme: Not Found
-osssssso. :ssssssso. Font: Not Found
:osssssss/ osssso+++. CPU: Intel Core i3-4010U CPU @ 1.7GHz
/ossssssss/ +ssssooo/- RAM: 1096MB / 7897MB
`/ossssso+/:- -:/+osssso+-
`+sso+:-` `.-/+oso:
`++:. `-/+/
.` `/
Whenever I connect to a wireless network with the network applet in the top right of the screen, it keeps "connecting" even though it has already connected. This does not happen when I disable WiFi and use the cable. The connected cable icon is show properly.
http://snag.gy/DVj9Z.jpg
I have disabled netctl
$ sudo systemctl disable netctl
How can I make the applet show that the connection has been succesfully established?
Bonus question is that on Windows the laptop can run for hours, but in Arch it's drained considerably faster. I also have a Dell XPS L502x and since Linux was installed the battery died pretty quickly because it drained so fast and we had to charge it constantly. That laptop is left with a 15 minute charge at 100%. The new Lenovo somehow takes 3 hours to charge from 0 to 100% and drains in about the same time. The same applet in the top right also keeps saying "Estimating...". I have installed PowerTOP and ran a diagnostics. Is it save enough to apply everything suggested?
Last edited by InFerYes (2014-10-23 08:43:43)

The Red cross usually appears when the battery has failed.
If you already tried the hard reset and the drivers update, then there doesn't seem to be much that you can do.
Get it repaired from Lenovo while you are still in warranty, that would be my suggestion.
Current System - Lenovo Y510P, GT755M SLI, 8GB RAM, 1TB HDD + 24GB SSD
When your plans fail, your Real Story begins!!

Multiple issues with Nokia Lumia 920

I bought my NL920 about one month ago (Telstra). It had been working flawlessly up until a few days ago.
The first issue I noticed was the back, start and search buttons were no longer being illuminated, no matter what. I tried multiple soft resets to no success. I just left it, thinking nothing of the problem.
A day or so after I noticed the issue with the backlight, two more strange things began to occur:
Tilt doesn't work at all. The screen doesn't rotate when the phone is flipped, and it doesn't seem to recognise tilting whatsoever (noticed this when I attempted to play Doodle Jump).
And second issue is apps are crashing as soon as they are launched. This doesn't happen with every app on the phone, but it occurs while trying to use some of my most used apps (Facebook and Camera are the main ones). I can't launch the camera app at all, and the side button doesn't work either.
I tried a hard reset in an attempt to resolve these issues, but all three issues are not fixed at all.
I have no idea what to do now. I've never dropped the phone, it's always been look after well. I am 99.9% sure it isn't something physical.
These issues all seem to have came after updating some apps (Extras & Info was one of them I believe). Could that be the problem?
Swapping the phone for a new one would be a last resort.
Thanks in advance for any help!
Solved!
Go to Solution.

I just reset it, didn't work unfortunately. Looks like I'm going to have to replace it.
Would I just have to take it to my Telstra shop and let them deal with it? Or can I send it to Nokia directly?
Thank you.

Multiple issues with Creative Cloud File Syncing

I'm have issues with syncing files on my mac to Adobe Creative Cloud. I don't seem to have issues syncing via drag and drop to my web browser. I keep getting this error while syncing via finder:
I also have a fairly complex PSD with folders that i'm toggling on and off using Layer Comps. I don't see any difference when switching Layer Comps within Extract in the browser. I do see the changes when turning on and off the folders though.. What's the deal with that?
Why does it take so long to render the PSD after I turn on a folder or switch layer comps? It takes about 30 seconds to re-render, which is crippling for our workflow.
This would be an amazing tool for our developers if these 3 issues were resolved.

Thanks for the information.
Could you now send me some log files please..
The log files can be found here:
Mac: /Users/<yourusername>/Library/Application Support/Adobe/CoreSync/
Windows: C:\Users\<yourusername>\AppData\Roaming\Adobe\CoreSync\
The logs have the date in the filename, like "CoreSync-2014-03-25.log". Please compress (zip) all the CoreSync-2014-MM-DD.log files and email them to me directly at [email protected]
Thanks
Warner

Multiple issues with new installation

I have several issues with my fresh installation of arch (just got myself a free old-as laptop , thus trying out arch for the first time as I usually run gentoo), and I'm not sure where these should go. I figure that I may as well lump them all at once while I'm at it.
The laptop model is a Toshiba Dynabook TX/430DX Japanese laptop similar to a Tecra A2 afaik.
1. If I use stock ARCH kernel, when I load up x11 it seems to be using some wrong drivers or something. Tried with and without xorg.conf. The screen is all fuzzy etc. However, I compiled my own kernel (the Zen sources), took out a whole bunch of drivers I knew I wouldn't be using (etc. SATA/IDE/extra whatnot so that it would merely take 3 hours to compile the kernel), x11 works fine. HOWEVER with the zen sources, when I close x11 I can't exit to console. I get some sort of weird artefact from what happened to be on the screen, or it just goes black. It does actually seem to be in console as I can turn off the laptop with ctrl.alt.del and the capslock etc seems to work fine. I'm thinking of recompiling the zen sources with the stock arch kernel config when I have the time just to see what happens, but I'm not too sure it'd help.
The VGA device is an: Intel Corporation 82852/855GM Intergrated Graphics Device (rev 02), using the intelfb module.
2. In most consoles I've used, if you type in part of a command then press ctrl.up/down, it autocompletes with previous commands you've run matching what you've already entered. However, in my install it brings me to the very first command in my bash history. How do I make it autocomplete previous commands?
3. When I use wvdial (I have a mobile modem), I get odd characters as shown in the screenshot posted.
I don't think it's a unicode issue, as ncmpcpp displays properly. This displays itself both in the console and in x11 (screenshot).
4. If I'm using the stock kernel and I stop wvdial, I get a whole bunch of kernel error trace messages. After this, anything that goes to dmesg will be displayed to whatever terminal I'm on (but not actually echoed, it gets overwritten if I change screen etc). Wvdial is also prone to crashing, sometimes taking out the whole laptop. However, while using the zen kernel I do not suffer this issue at all.
Any help in helping me find the source of these issues would be greatly appreciated. They're not showstopping issues, but extremely irritating nonetheless.
Thanks in advance.
EDIT: I created a zen kernel based on the arch stock kernel. Unsurprisingly, I still suffer from the x11 video issue. However, I don't have issues with number 4.
Last edited by ugugii (2009-06-14 00:57:37)

People are probably going to want to know the make/model of the lappy before they can
help.
Deej

Multiple Issues with HTC 8X and Verizon Doesn't Care

I have had this phone for three months and had this issue the whole time. Searched Verizon and Windows forums and found the same thing. Only Verizon HTC 8X having this issue. On top of that I am now having hardware issues. Phone SIM not showing up as connected and have to restart or re-seat the SIM. Battery life has gone down drastically. Overnight charge gets me 11 hours tops without using my Data plan with WIFI off and other major apps closed out. Shouldn't have to do that to utilize features on a smart phone. As soon as I begin using my data plan the 11 hours is cut in half. Not to mention if I use the phone for GPS navigation it gets drained in 30 minutes to and hour. Then the software is now freezing. Either freezes completly and have to restart or applications i try to open, stall and then go back to the start menu. I have to then power off the phone which freezes and 15 minutes later powers off. 3 months into the phones contract. Ridiculous. Bought from Letstalk.com and they told me I am SOL. 14 days for return and 30 for exchange. Go see HTC. HTC says i'm SOL. Go to Verizon and get a new SIM. Factory Reset the device as well. If that doesn't help, ship it to us and we will repair. Are you kidding. I am a consultant for a major merger and acquisition company that deals with infrastructure practices all day. Send you my phone for repair on a 3 month old phone. Are you kidding me. Finally talked to Verizon. They are not consciously aware of the HTC 8x missed call three beep scenario when it has been on there forums since December of this year. With all my issues they told me I'm SOL. I don't want to send it in for repair. That is ridiculous. What will that solve. A couple of the issues. What about the three beep issue the has plagued me for months. A refurbished of a different model from two years ago, no thanks. I received a new phone three months ago. So you wanna make it my fault and tell me here take an iphone 4 from two years ago from 300 dollars. I am furious with this and want to proceed with making sure this lack of decent service for an issue like this is resolved and others don't have to face this type of treatment. I paid good money for a smartphone with reliable service. So far i'm being told to bend over and take it from everyone. I feel that the three beep issue alone is a breach of the contract I have with Verizon and I should be able to constitute that right and terminate this disease.

Hello,
I received my new "reconditioned" phone to replace my 6 month old Droid 4.
The replacement phone only holds a charge for 6 hours or so, with minimal
use (no internet).
I am VERY unhappy. I left a message with the store employee who helped me
activate the replacement
phone, but have not heard back. This is really disappointing. I paid a lot
of money AND signed an additional
2 year contract in order to purchase my Droid 4. Now I am stuck with a piece
of junk phone as is my other
employee who has a replaced Droid 4 as well. The store even told me they had
"issues" with this model (battery completely died on my phone 619-XXX-XXXX
as well as on 760-XXX-XXXX).
We concluded that when both our Droid 4 phones died within a couple of
months of each other.
AT the very least, we should have our phones replaced with new, so they can
at least hold a charge and be used for
our business as the purpose they were purchased for.
I would think making this right, since this is quite obviously NOT our fault
would be clear if you expect to retain customers.
Lisa <Personal information removed for privacy per the Verizon Wireless Terms of Service.>
Message was edited by: Verizon Moderator

Lenovo y40-70: Multiple issues with GPU :-( advice with at least one will be great help

Similar Messages

Maybe you are looking for