Lenovo Y50-70 has sharp edges and is cutting fingers

I recently purchased a Y50-70 for my daughter and the sides of the notebook has severly cut her fingers on serveral occasions and taken chunks of flesh from just brusshing up against the side or reaching into her bag to get the notebook. This is a safety issue and I would like to lodge a complaint and get a remedy for poor design.
Who do I contact in Lenovo?

Dmastersusa,
Thank you for your post. Lenovo takes reports like yours seriously. As a result, I am opening an investigation.
I've sent you a private message, as I would like to work with you to understand the situation and assist you with a resolution.
Thank you,
Amy Tupper
Technical Resolution Lead, Pervasive Issues
Lenovo US
ThinkPad T431s, S3 Yoga 14, Helix, Edge 11 & 14, E431, IdeaTab A1107, IdeaPad A1-07, IdeaCentre Horizon, Yoga Tablet 2 10 1051
First computer was a 1980 Commodore 64 from Radio Shack/ GEnie SFRT member from 1993-1996

Similar Messages

IGS / WAD Charts: blurred fonts, sharp edges and lower quality images

BW Version: 3.5
The WAD´s charts has the poor visualization with blurred fonts, sharp edges graphics and lower quality images.
Any way to change it on IGS?
tnks

Hi
Please check these two notes
Note 454042
Note 514841 - Troubleshooting when a problem occurs with the IGS

Compressing "masked' quicktime movie-mask has ragged edges and white areas

I have been masking quicktime movies with quicktime pro. I get a good-looking masked quicktime movie. But when I try to export to mp4 or other file types, the mask looks terrbile, the edges are ragged and some previously masked areas are now white. HELP!

i tried apple 1, 2, and 3 for actual, double, and full size, always a white border in full screen. at actual size the side borders are bigger than the top and bottom, double and full it's a crisp 1 pixel grey line all the way around. i made the mask file 481x641 and 482x642 with no changes at all, all of them cut way inside the edges of the picture to avoid that border.
strange part is at full size (more than double size for sure with these files) the border is exactly 1 pixel, not scaled up to 2.x pixels like you would expect if it was in the movie, not just the player sucking with masks. guess i'll hope someone notices and fixes in a future release. just like with the h.264 encoding border with masks. i guess the white border all the way around is better than a neon green one on the right side which i get with h.264
/someone not testing QT with simple rectangular masks it seems
here's a screenshot of my movie in fullscreen at double size so you can see the whole border:
http://www.farkimages.com/view.php?img=4c9f24b0f5.jpg

Autoplay movie has ragged edges and pixelated

Why I added an autoplay movie when everything was working I don't know. Everything was fine.
Before adding conent to the autoplay section the menu, scenes, everything burned nicely on pro setting, 110 minutes per disk nice quality. I wanted to add a short 10 sec movie to auto play when the dvd was inserted, I'll call this movie the tag.
I made up the tag animation in Flash at 30 fps, sized to 768 x 576 pixels, then saved it as a quicktime movie. I opened the .mov file into iMovieHD and saved it as a iMovie file. Went into iDVD added the iMovie tag to the autoplay section in the map view. Ripped, burned ok.
When I tested the DVD in my older Pioneer (DV-333) dvd player I get a large boxes, stalling ragged edge picture in the autoplay portion only. The rest of the dvd plays great. Tried my neighbours newer pioneer dvd player and the DVD wouldn't play at all. The DVD plays normally in my G4 and G3 - pismo using apple DVD player.
So close to finished and yet so far.

The autoplay is ok at a lower frame rate (12fps) in Flash. I may later redo the Flash movie with full wide screen instead of the 768x576 resolution.
so I the made up the animation in Flash exported to qt.mov
iMovie to iDVD. Looks good.

Screen has black edges and content seems magnified....

This happened while working (using Word). The screen just snapped to a smaller image while the entire content of page got larger.
I've tried turning zoom on and off, doing whatever is possible with DISPLAY preferences, and a restart, but don't seem to have any control on sizing the desktop to the actual laptop screen size.

If you restart in Safe Mode do you regain normal screen control?
http://docs.info.apple.com/article.html?artnum=107393

Stroke won't curve and has straight edges

Any idea why this happens? I applied a 1pt stroke as you see in the screenshot and I gave it a default width profile. For some odd reason no matter what I do that stroke has sharp edges and isn't curved smoothly.

So when will they have a fix for this?
send a bug report, but nobody in this forum can tell you when it will be fixed.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

LENOVO Y50-70 HDMI NOT WORKING

Hello guys.I will start with beggining.In March i decide to buy 1 MSI GE602Pe apache pro laptop with intel processor I7 4720HQ from 1 online store.I buy it got it home i installed windows 8.1 all was ok i connected the laptop with my HDTV via HDMI all was good untill i shutdown laptop for some hours.When i start it HDMI didnt recognize anymore my HDTV.I decided to reinstall drivers nothing happen i reinstalled the windows and from what i remember i got again signal on my TV but again i lose it after shutdown.I have send back the laptop thinking it has some issue with motherboard and i got another laptop 1 Lenovo y50-70 with I7 4710HQ and same intel 4600 hd graphic.This one come with preinstalled windows connected again tv everything works for some days and after again losed the hdtv connection via hdmi.after more then 20 windows rollbacks and 200-300+ graphic drivers reinstalls who grand me just some times image on my HDTV i decided to return and this one and exchange with another y50-70 because i read on lenovo forum someone says is motherboard broken.Yesterday i got the new Lenovo and AGAIN no connection on TV.I have 4 HDMI cables and 5 TV's at home.on no one is working.I decide to test it on my parents tv 1 samsung tv i connect it same old no image i reinstall driver and i got image.i take laptop to my room connect with my tv i got image but again after shutdown no image
My conclusion is the intel 4600 driver is the problem.I installed all the old and new drivers and no one fix this problem!
If anyone has any idea how to fix this will be wonderfull b3cause is imposible 3 new laptops to have HDMI port broken or 4 hdmi cables to not be good and 1 new just buy it with 4k support and 5 tv's to dont work

Hi GaBI13,
You can switch on - off the wireless by pressing (airplane mode) F7 or Fn-F7. If this doesn't help you check that wireless device is present in Device Manager, is enabled and working properly (no arrows or yellow triangle present on device). If everything OK go to Control Panel-Network and Internet-Network Connections, identify the Wireless Network Connection. If this is Disabled, double click to enable it, right click and choose Connect. The driver for WiFi you can find here in case that you need.
Hope this will help you.

Sharp edges on MacBook Pro

What chances are there of Apple changing it's sharp edge design on future Mac Book Pros? I've just returned a 13" MacBook Pro because the front edges are so sharp they left red marks on the the sides of my hands hurt after 2 hours of typing with the laptop on my lap. I know it's probably not the case if on table, but I often need to have my laptop in lap! (Which is what it's designed to do) - as I travel a lot with it. I'm a devoted Mac user - just love them - and I'm hugely disappointed by this but i't just not comfortable. I've just got a refund and will carry on with my original 1st Generation MacBook Pro (which is a great machine (lacking the specs of course) and very comfortable to use - until Mac come out with a kinder-on-the-wrists version. My partner's just got one and has the same issue and will return it. We're just hoping Mac will alter this at some point with upcoming models.

Welcome to Apple Discussions!
There have been numerous complaints about the sharp edges, and the best thing to do is to give feedback to Apple as sig suggests.
There is something known as a computer glove that might help should you need a new Mac before Apple gets around to changing the design.
http://www.amazon.com/s/?ie=UTF8&keywords=computer+glove&tag=googhydr-20&index=a ps&hvadid=4307637227&ref=pdsl_5zwpyolgute
Office Depot carries these if you want to look at one in person.
Good luck!

Lenovo Y50 Microphone Issue

I started using my Lenovo Y50 about a month ago and have been having an ongoing problem with external microphones/headsets.The issue is that when I plug in a headset, the sound defaults to the headset's speakers, but the default microphone remains the one in my laptop. I have not been using a USB or the S/PDIF plug; just the normal audio jack. So far I have tried three pairs of headphones: A TekNmotion Yapster Blaster headset, a pair of apple earbuds with the mic attached, and finally a Razer Kraken Pro headset. Based on that, I don't think it is the fault of the headsets.Additionally, my brother got the same exact laptop at the same time, and he is experiencing this issue as well.We figured out a temporary fix:Open the sound menu, go to the "Recording" tab. For us, there are three items present: "Line In" for the Razer pro headset, "Microphone," which I assume refers to the laptop's mic, and "Stereo Mix." By setting the default device to "Microphone," then unplugging and plugging the headset back in. It will now work, but only when the "Sound" window is open. As soon as the window closes it stops working. I have tried splitting the speakers and mic, plugging in just the mic by itself, but it will only work with a combined jack. I have limited knowledge of the S/PDIF input, but from my troubleshooting experience I found that it does not work with the split mic or speakers, or combined audio jack. (I have no idea if this is relevant) Here's everything:ProcessorIntel(R) Core(TM) i7-4720HQ CPU @ 2.60GHzManufacturerIntelSpeed2.6 GHzNumber of Cores8CPU ID Family06Model3CStepping3Revision Video Card 1Intel(R) HD Graphics 4600ManufacturerIntelChipsetIntel(R) HD Graphics 4600Dedicated Memory0 BTotal Memory1.8 GBPixel Shader Version5.0Vertex Shader Version5.0Hardware T & LYesVendor ID Device ID Plug and Play ID Driver Version10.18.14.4029Video Card 2NVIDIA GeForce GTX 860MManufacturerNVIDIAChipsetGeForce GTX 860MDedicated Memory4.1 GBTotal Memory4.0 GBPixel Shader Version5.0Vertex Shader Version5.0Hardware T & LYesVendor ID Device ID Plug and Play ID Driver Version9.18.13.3250Memory16 GBOperating SystemMicrosoft Windows 8 (build 9200), 64-bitService Pack0Size64 BitEditionBasicVersion6.2.9200Locale0409BIOS9ECN37WW(V2.01)VersionLENOVO 9ECN37WW(V2.01)ManufacturerLENOVODate Sound Device 1Realtek High Definition AudioDriver Version6.0.1.7195Sound Device 2NVIDIA Virtual Audio Device (Wave Extensible) (WDM)Driver Version Sound Device 3Razer Surround Audio ControllerDriver Version Thanks for any help provided.

to me that looks 100% and the program just got frozen on the exit part of it
if you can't type or use the pc, restarting it is the only option, it displays the please do not remove when the update progress is under 100% but as it has goto 100% it should have completed

Output video for live streaming has black edges

I use tricaster mini to stream live from church but my output video has black edges and I have been trying to remove it but it's not working. I use adobe to encode any help?

buy any commerical camcorder (I use a sony handy cam )that has the feature you desire and purchase pinnicle usb 500 adapter so you can connect the camera to the usb port on your computer all for under 1000;

Tell me the secret to sharp edges.

Hi guys,
How do i get a sharp edge each and every time. I am using the rounded rectangle tool to draw some tabs. At one time it gives me sharp edges and some other time the edges are blurred. An example HERE
Why is that so. What is the secret to sharp edges all the time.
Thanks for your response.
am

Am...
Please read through the thread linked just below. The answers posted by Buko and Zeno are on the mark, but I took a little more time explaining what's causing the fuzzy borders you're seeing and why the "Snap To Pixels" option fixes it.
"Strange border on shape and other layers"
http://forums.adobe.com/message/1648285#1648285

ANOTHER Lenovo Y50 case defect issue and terrible customer service

I don't normally do forums but have been so infuriated by Lenovo customer service I felt obliged to sign up and share my experience.
I bought a Lenovo Y50-70 in November 2014. Within one month I noticed a small plastic part near the hinge was missing (i.e. I noticed the other side was intact and how it should look). I sent this to Lenovo for repair and received a call 5 mins ago to say this won't be repaired under warranty and that I will have to pay for it. This is absolutely outrageous and from the number of posts on this very forum it appears this is a common defect with this particular case. I asked the customer service rep if there was anything he could do and all i received was a very short blunt manuscript response, exhibiting no intention to help. I am not prepared to pay for shoddy design/workmanship and so my only option offered was to receive the laptop back unrepaired.
This is absolutely incredible that a company as big as Lenovo can treat their customers in such a fashion. Unless an administrator on this forum wishes to investigate this matter (as it's currently still with Lenovo repair centre) I certainly won't make the mistake of buying or recommending a Lenovo again.

So Lenovo/Medio have had my laptop for 20 days now. 2 weeks ago I was told they wouldn't repair it under warranty and would return it unrepaired. Still nothing. I called customer service yday who promised to investigate and get in touch. Nothing. I called again today, same response i.e. would investigate. It seems there is a huge communication problem between Lenovo and their Medion repair centre.
I am now looking into a legal resolution as surely under the sale of goods act it is illegal to retain an item for so long despite no repair actually taking place. You would also think Lenovo would have the decency to offer to repair the small damage (which I was quoted £80 for) as compensation for delay. But alas no, what Lenovo know about customer service is less than 0.
The fact a representative hasn't even bothered to respond on here is testimony to their lack of care and respect for customers.
Yours truly
Another Totally Annoyed Frustrated Lenovo Customer

I own photoshop elements 6 and premiere elements 4 (p/n 29180383). Just bought a Lenovo Y50-70 touch, can I purchase an upgrade?

Can photoshop elements 6 & premiere 4 be upgraded for use on a windows 8 Lenovo Y50-70 touch? The upgrade option on the Adobe site doesn't list my software version?

Hi Rosera,
This is bad and I am sorry to hear that you are running into these issues.
Let me connect with you, so right now, the current state is that you have installed copy of PSE 8 in trial on your windows 7 machine, and when you are trying to enter the serial number from your PSE 8 Box, it is saying the serial number to be invalid?
It might sound pretty obvious, but please make sure that you are entering the serial number correctly and of PSE 8(in case you bought a PEPE box)?
Have you tried the steps mentioned below by Barbara?
If possible, you can send me the serial number through PRIVATE MESSAGE and I can check it on my end that whether the serial number is indeed invalid or that the issue is with your machine?
Regards,
Ankush

HT4623 The display on my 4S has a hallow arounfd the edges and a black area in the middle resembling a domino

The display on my 4S has a hallow around the edges and a black area in the center which resembles a domino with 6 spots

The front screen assembly is probably a poor quality replacement, with the front glass being too thick and causing pressure on the LCD Display below it. Or when the screen was replaced they forgot to remove the plastic protection film, so this sheet of plastic is making the entire front assembly too thick, causing pressure on the LCD Display. The bit about the domino with 6 spots seems like the Mirror sheet at the back of the Sceen is removed, or again is just from all the pressure I described in my first two sentences.

Is it possible to fix my mini ipad?it has cracked monitor.and has some scratches on its edges.thank you..

is it possible to fix my mini ipad?it has cracked monitor.and has some scratches on its edges.thank you..

You'd have to either take this to your local Apple Store or contact them via email to see what can be done and how much it will be to resolve.
Regards,
Steve

Lenovo Y50-70 has sharp edges and is cutting fingers

Similar Messages

Maybe you are looking for