Lenovo Y50 trackpad not working when a key is pressed.

Basically what is stated above. The driver appears to disable my ability to use the trackpad while I am holding a key. Like if I were to hold W (if I were playing a game) the trackpad does not function. I looked through the trackpad settings to see nothing that could disable it other than palm settings (which did nothing when screwing with the slider). I contacted customer service via phone but to no avail. If you know a way to help me fix this issue that would be great. Cheers.

I looked at this forum https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Y50-Trackpad-keyboard-issue/m-p/2051729#M120537 and found out the driver appears to be different. Is there an upgrade I am missing, I am having the exact same issue.

Similar Messages

Why are some of my keys not working when I put a bit of pressure on it?

Hi there, since 4 months ago I've noticed that my a, q, 1, backspace, and volume buttons do not work when theres a little bit of pressure on or under it. It kind of bothers me because I cant lay in bed and do my things, I have to put it on a table. So my question is, why is this and how can I fix this?
5 or more weeks ago, I can't remember, my keys did suddenly work when there was a bit of pressure on / under it, but I don't know how..
I'm running OS X Mavericks 10.9.4
Processor: 1.3 GHz Intel Core i5
Memore: 4 GB 1600 MHz DDR3

What is your operating system? Reader version? How do you convert to PDF?
You write that "some" of the links don't open; what's the difference with links that do open?

Speakers Not Work When Diplay is in Upright Position - Lenovo G450

I have a Lenovo G450. Recently the built-in speakers will not work when the display monitor is in open position. The speakers will work when display monitor is half closed. How can I fix this problem?
Thank you for any help you can offer to me in solving this problem. ..

The speaker is installed at the bottom of the notebook please make me correct if it is on Display Panel.
Make sure you have the updated Audio driver and BIOS.
Please refer to the web link http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_list.aspx?CategoryID=370748
You may also connect the external speaker and check if the same issue appears.
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Lenovo S8-50LC Wlan(WiFi) Does not work when use Sim Cart(3G)

Hi
Tablet Lenovo S8-50LC
Wlan(WiFi) Does not work when use Sim Cart(3G).
What is the solution for this problem?
Build Number : TABS8-50LC_S000200_150121_ROW
SoftWarw Version : TABS8-50LC_150121

Right, but if you have the SIM in the tablet and you put the tablet in airplane mode, does wifi work then? If so, it may be a bad SIM. Do you have another SIM you can try?

TrackPad not working unless "Diagnostic Tests" app running in background

My Torch 9810 TrackPad stopped working... I had downloaded the BlackBerry 7 OS free apps including those that provide "notifications" and "text to speech" and "speech recognition" capabilities that I don't mind having to fool around with, but I don't want to use all the time... they tend to take over buttons and configuration too much, so in my efforts to remove them or at LEAST get them to stop activating every time my BB moves in my pocket I was uninstalling things. I was told I had to reboot the device, and after doing so, the trackpad would not work.
So I go back and restore my backup... and the trackpad works... briefly: all the restored apps start asking for permissions etc. and run their configuration wizards whatever and then the trackpad stopped working again.
I've tried restoring AGAIN and have even downgraded the OS to get back to a "more stable" configuration with NO third-party software installed and no luck.
At this point, the trackpad does NOT work at all in any apps. I'm sure this is a software-related problem and not that the trackpad itself is broken and needs replacement.
I've used BBSAK to try to lobotomize it back to total "factory default" but that didn't work either.
I want to rule out a hardware failure (I'm SURE this is just software related, because it happened after a reboot and there had been no problems prior to this) So today I visit the BlackBerry.com website and search for "trackpad"
I get "trackpad not working" as the first result.
"TrackPad Not Working" KB article
At the very bottom of the page is a link to the "Device Self Test Application" instructions at:
"Diagnostic Self Tests" KB Article
So as soon as I start in with the Diagnostic Self Test app, it asks "Do you want a guided setup" and shows "Yes" and "No" buttons. Instinctively I try to use the TrackPad to navigate to "No" because I just want the trackpad diagnostic, and... the trackpad works.
I exit the "Diagnostic" app and go back to my home screen and it works again... briefly...
I re-enter the diagnostic app, the trackpad works, then I long-press the Menu key to go to different apps, and the trackpad continues to work.
So, it seems like keeping the 'Diagnostic Self Test' app running in the background is 'propping up' the TrackPad so it works, but when I exit the Diagnostic app, it stops working.
Also, the back of the device seems warmer than usual, as if the CPU is being driven hard.
I'm wondering if some rogue app might be crippling the TrackPad? And the Diagnostic Self Test app is somehow pushing the rogue app aside but the rogue app is "waiting as hard as it can" and driving the CPU hard?
Yeah, I'm grasping / speculating / making stuff up, but maybe someone can decipher what I'm saying and give me some clues?
If there's a "end user totally restore the firmware to a factory configuration" that will likely resolve this issue, I'm capable enough to try it rather than be without the trackpad (or the device being repaired under warranty) for days.

Note: I decided to try exiting the Diagnostic Self Test app to see if the TrackPad would stop working... or if using a specific app made it stop working... and after doing so, then rebooting etc. the TrackPad has now been working for many hours: dare I try to reinstall some of the apps I removed?

Macbook pro Late 2011 13.3 inch i7 keyboard and trackpad not working bluetooth showing a cross sign and no usb mouse is detected. Almost dead keyboard and mouse. Earlier same problem used to be solved by opening the lower cover and closing it.

My macbook pro 13.3 inch i7 late 2011 edition has previously encountered unresponsive trackpad and keyboard. To solve that, I used to open the back cover and then close it. It has been working fine since that. Yesterday, same thing happened, this time I noticed that bluetooth icon is showing a cross sign across it and keyboard and trackpad were unesponsive. After some time , everything worked fine and bluetooth sign was back to normal. Then , suddenly it went back to the problem. I shut it down by holding the power button. When I booted it again, I could not login because keyboard and trackpad were not working. I attached a HP mouse it didnt work. I opened the back cover disconnected the battery and then connected it again, didnt worked. Since then , I have tried many things and nothing has solved the problem.

@sanjampet
As you suggested I reset the smc, in the first boot nothing worked. In the second boot, it all worked like a charm. I thought that my problem is resolved now. To test it, I shut it down properly. Next morning, I powered it on, all things i.e, keyboard, trackpad, bluetooth etc. worked and I thought that problem has been solved. When I was just going to visit apple forum to reply you, the same problem reappeared. A sawtooth cross over bluetooth icon, keyboard not working, trackpad not working,no usb mouse working which worked well when it was fine. I reset smc so many times again and again but same problem continued. Isn't it a problem of the firmware?
Next time when it will work, I will update its firmware.
My macbook was bought in dec2011 so no warranty now.

I baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...

i baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working. when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Photoshop CC. Colour selection not working when using alt and brush.

Hi, Photoshop CC. Windows 8.1 64 bit. Colour selection not working when using alt and brush. I have tried rebooting and other things like closing swatch panel etc.
The alt key is otherwise OK. It's not the recent upgrade from Win 8 to 8.1 (5 days ago) because the colour selection facility was working yesterday. Any ideas.

I'd say things sound desperate enough to try resetting Preferences
Reset Preferences
Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
Mac — Hold down Shift Cmd Opt immediately after starting Photoshop
If that fails, we need to know your operating system?
Do you have a full CC subscription, or by apps do you mean Photoshop, Bridge and Lightroom?
Another other information that might pertain ?

Jsp:useBean not work when I install aplication!!

Hi
I developing an application with UIX JSP on Jdeveloper 9.0.2 and i using something like this:
<jsp:useBean id="cbean" class="oracle.jsp.dbutil.ConnBean" scope="session" />
<jsp:setProperty name="cbean" property="dataSource" value="jdbc/BiblosConnectionCoreDS" />
</jsp:useBean>
<%
try{
cbean.connect();
This code work fine in standalone mode, but when i install this application on 9IAS, with an archive War, the code <jsp:useBean, not work.
What is missing for? o What is the reason for this situation
Thanks for some help?

many thanks for your reply, and I have download new updates driver from your website (http://consumersupport.lenovo.com/en/DriversDownloads/drivers_show_890.html) and Installer it on my Y410 but it still does not work!!!
the firstly: when I star up with win7, I can see a speaker icon right down near the clock, when I click mouse on it, I can see: Volume Mixer - Speaker with Device(Speaker Hight definition Audio Device, Digital Audio(S/PDIF) ( Hight definition Audio Device) ).
Look in devicemanger I can see "Sound , video and game controll " has already installer with 'Hight definition Audio Device ' & 'Unimodem Hafl-Duplex Audio Device' below... but I cannot hear the sound when I play music, video, games...etc...
the second: when laptop wakeup after 'sleep' mode, I can hear sound on speaker! but headphone jack does not work when I plug my headphone jack into it (I cannot hear sound with headphone), however I still hear sound from speaker, in this case!
Can you help me or tell me how I can do ?!
Thanks and Best Regards,
jupitervn

My login password is not working when i try to log in to my macbook air. what should I do?

my login password is not working when i try to log in to my macbook air. what should I do?
Thanks, Debora

You can reset the password.
How you do it though depends on the version of OS X you are running.
On Lion or Mountain Lion, you use the following technique to reset the Administrators password:
Boot to your Recovery Partition, by holding down the Option key while starting, and then selecting the Recovery HD as the boot choice.
Once booted, at the top of the screen is a menu ..., select Utilities / Terminal from the menu bar.
In the Terminal window, type “resetpassword” (without the quotes) and press return. A “Reset Password” window will open. Select your boot volume (your SSD drive) if it is not already selected. Select your administrators username from the menu labeled “Select the user account” if it is not already selected. Follow the prompts to reset the password. Restart the computer from the apple menu.
If you are using the Keychain, you will lose your existing one, and have to start a new one, unless you remember the old password.

Lenovo B570e brightness not working

i have bought lenovo B570e nine months ago. everything was going fine. now i have reinstalled the win 7 but brightness control is not working. other Fn keys are working correctly except brightness. laptop brightness is stuck to maximum. kindly help me out. thanks in advance

hi zaidi7,
Thanks for Using Lenovo Community Forums!
Can we try installing this Driver for your Display
Intel Wireless Display Driver
89zz04ww.exe
115.24 MB
And try uninstalling the Lenovo Energy managerment Software under control panel / Programs and features uninstall
and reinstall this
Lenovo Energy Management Software
CAEZ19WW.exe
13.7 MB
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Automatic hierarchie aggregation not working when dimension formula is used

Hey folks,
i'm facing the following issue. currently i'm setting up an application to plan sales quantities, prices and manufacturing costs.
subsequently i want to calculate following values for members of account dimension:
- turnover (price * sales)
      -> implemented as dimension formula
      -> in the account hierarchie it's a child of net revenue
      -> account type: inc
      => calculation work fine in the reports
- manufacturing cost (manufacturing cost * sales)
      -> implemented as dimension formula
      -> in the account hierarchie it's a child of net revenue
      -> account type: exp
      => calculation work fine in the reports
- net revenue (turnover - manufacturing cost)
      -> in the account hierarchie it's the parent of turnover, manufacturing cost
      -> account type: inc
      => key figure is empty !!
As far as i understood BPC is aggregating automatically along the hierarchie. That means to me that net revenue should be automatically calculated due to the hierarchical relation in account dimension.
Did anyone ever face same issue ? probably the hierachical aggregation is not working when key figures based on dimension formula is used !? Do i really have to implement script logic to solve this issue ?
Looking forward to interesting approaches to solve this issue !
Best regards,
Moritz

Hey,
sorry my description was misleading at this point. i don't have a formula define for net revenue dimension member. i expected the system to automatically calculate it by aggregation along the account dimension hierarchy where net revenue is parent to the turnover and manufacturing costs which are calculated by dimension formula.
Best regards,
Moritz

Keyboard backlighting not working when using Windows in Boot Camp

Hi, I'm posting this for a friend with a new Macbook Air. He says that his keyboard backlighting does not work when he is using it for Windows (don't know which, but probably Vista). Any ideas why? Thanks. Gary

Install all the drivers needed when running boot camp - try for example inserting a DVD - then press the eject key - See if it comes out - If it doesn't install all the drivers - try Control Panel - If not try re-installing your version of Windows.

Trackpad not working; says it's not installed

Last night, I was watching a YouTube video. Kept it open and closed my iBook G4, and today I woke to find my trackpad not working and when I go into System Prefrences, it makes no mention of a trackpad except when I type in "turn off trackpad" and it then says I don't have one installed. What's up??? I can't really open it up because it's not mine (the state gives students laptops).
It stopped working before because it got wet and I eventually dried it out and until now, it's been working fine.
Any tips? I heard it I might have to get OS X reinstalled (which is possible).

NEVERMIND!!! IT'S FIXED!!!
I somehow managed to fix it, and the trackpad is working again!!! I cleaned it real good with these "Electronic Cleaning Wipes" so maybe that's what did it (don't worry, the laptop was off and the battery was removed when I was cleaning it).
SO DON'T WORRY... IT'S WORKING!!!

Multitouch on track pad not working when running Windows 8 in boot camp

Does anyone know a work around on how to resolve the issue of more than one fingers on the trackpad? For example, I use one finger to click a window then another finger to slide/move the window to a different location on the screen. This does not work when running Windows 8 in Boot Camp latest version. Any suggestion is much appreciated.

very very few gestures are supported in windows
https://discussions.apple.com/message/24548533#24548533
if it's a limitation from ms you need to contact them
if it's a limitation from apples drivers you can use feedback channel
http://www.apple.com/feedback/

Lenovo Y50 trackpad not working when a key is pressed.

Similar Messages

Maybe you are looking for