Lenovo yoga 10" how to load docs and music

just purchased this along with micro lead to usb. I have a click free storage HD and nothing happens when I connect it. How do I upload music and files to my Yoga? This is first time ever I used android and finding it rather strange.
Also if poss, how do I stop it going into sleep mode so  quickly? I have ordered the keyboard44
LENOVO 888015720 Yoga Tablet Case - Bluetooth Keyboard Cover for Blade10
Is this going to be the only way to put stuff on my tablet via the keyboard?
with only one micro connector, do I use this for playing an external speaker?

After you plug the USB cable in to both the PC and tablet, pull down the tablet notifications. Look for the notification with the USB symbol beside it and select it, then choose 'Media device (MTP)'.  After that the tablet will show up in Windows Explorer like any other external drive. If you have an SD card in the tablet it will show up separately.
To adjust the screen timeout go to Settings > Display > Sleep > select the one you want to use.
There is a speaker jack on the right side of the tablet, directly opposit the power button.
Note that my answers are for the B8000 Yoga 10 Tablet.

Similar Messages

  • Any one know how to load pics and music on the iphone 4

    anyone know how to load pics and music on the iphone 4 if so can you please help

    If you have ever owned and used an iPod, done the the same way as with an iPod.
    You should spend some time with the user guide.
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • HT2731 How to buy films and music and how to received my email send to my I pad email that is send to me  but the computer that I received from my computer that I am using  at work

    How can I receive my email to my I pad the email that was send to my computer that I am using at work to go to my I pad.and how to buy films and music and how do download music and movie from my computer to my ipad .and how to   send picture to other divers or cellphone

    Some instructions for removing Community Toolbar are available in this thread: https://discussions.apple.com/message/15868085#15868085

  • How to load BeginningBalance and movements into HFM via FDM from ERPI

    I have a file generated by ERPI with the columns of |AMOUNT|BEGIN_BALANCE_DR|BEGIN_BALANCE_CR|PERIOD_NET_DR|PERIOD_NET_CR|
    among many other columns.
    How can load them via FDM into the Custom1 dimension in HFM, which contains BeginningBalance, Additions, Disposals, etc.
    So basically I will have a trial balance, which I can compare with GL and OBI.

    Hello
    You can use the IDOC SOPGEN01 for that purpose.
    Please check transaction WE60 for IDOC documentation and there are many old threads with information about this IDOC.
    BR
    Caetano

  • How to backup docs and pics using a USB drive?

    I'm a fairly new Mac user and I'm panicking a little right now. I bought a USB to backup my pictures, documents, etc. (I also backup using Time Machine and an external drive, but wanted some extra protection). I just inserted the USB drive for the first time, it showed up on my desktop as "Untitled" (so far, so good), then I dragged my Documents folder from the Dock to the USB icon and the Documents folder from the Dock is gone. (Yikes!) When I opened the USB icon, there was nothing in it. I looked in Finder and my Documents are still in this Mac (somewhere), but how do I get the folder of them back onto the Dock? And before I go any further, what is the (proper) procedure for backing up my docs and pics (from iPhoto) to this USB drive?
    Any help would be greatly appreciated. I'm not gonna touch a thing until I hear from someone with more Mac knowledge than this Mac newbie.
    Sunny

    Select the drive in the Finder, choose Get Info from the File menu, and if it's format doesn't contain Mac OS Extended, use the Disk Utility in the /Applications/Utilities/ folder to erase it.
    Click on the item in the Finder's sidebar with the house icon and drag the items inside you want to back up onto the external drive and drag the Documents folder to the Dock.
    (42512)

  • How to load dimensions and members in Planning application

    Hello Everyone,
    I am trying to load dimensions and members in planning. I know that loading dimension is not recommended through Essbase but I wanted to give it a try. I tried to load the dimensions through rule files but it threw an error that the "members do not exist in database." Is that an indication that data cant be loaded at all in planning application through Essbase.
    Thanks is advance for all the replies !!

    If this is a planning application, you need to load metadata/dimension to planning first. You cannot load metadata directly to Essbase as it will be overwritten when you refresh planning.
    You should read documentation to understanding how planning works. Planning is an interface which sits on top on Essbase. However, Planning metadata is stored in database tables and it is synch'd with Essbase through Hyperion Planning refresh.
    In order to load metadata to planning, I would suggest to log on to planning and try to build dimensions manually first to know how planning interacts with Essbase. You could load metadata into planning through:
    1. Manually
    2. ODI: You will need to reverse planning application and then use it to load metadata
    3. Outline load utility on planning server.
    Remember, all Planning maintenance is done through planning interface and not through Essbase.

  • How to load date and time from text file to oracle table through sqlloader

    hi friends
    i need you to show me what i miss to load date and time from text file to oracle table through sqlloader
    this is my data in this path (c:\external\my_data.txt)
    7369,SMITH,17-NOV-81,09:14:04,CLERK,20
    7499,ALLEN,01-MAY-81,17:06:08,SALESMAN,30
    7521,WARD,09-JUN-81,17:06:30,SALESMAN,30
    7566,JONES,02-APR-81,09:24:10,MANAGER,20
    7654,MARTIN,28-SEP-81,17:24:10,SALESMAN,30my table in database emp2
    create table emp2 (empno number,
                      ename varchar2(20),
                      hiredate date,
                      etime date,
                      ejob varchar2(20),
                      deptno number);the control file code in this path (c:\external\ctrl.ctl)
    load data
    infile 'C:\external\my_data.txt'
    into table emp2
    fields terminated by ','
    (empno, ename, hiredate, etime, ejob, deptno)this is the error :
    C:\>sqlldr scott/tiger control=C:\external\ctrl.ctl
    SQL*Loader: Release 10.2.0.1.0 - Production on Mon May 31 09:45:10 2010
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Commit point reached - logical record count 5
    C:\>any help i greatly appreciated
    thanks
    Edited by: user10947262 on May 31, 2010 9:47 AM

    load data
    infile 'C:\external\my_data.txt'
    into table emp2
    fields terminated by ','
    (empno, ename, hiredate, etime, ejob, deptno)Try
    load data
    infile 'C:\external\my_data.txt'
    into table emp2
    fields terminated by ','
    (empno, ename, hiredate, etime "to_date(:etime,'hh24:mi:ss')", ejob, deptno)
    this is the error :
    C:\>sqlldr scott/tiger control=C:\external\ctrl.ctl
    SQL*Loader: Release 10.2.0.1.0 - Production on Mon May 31 09:45:10 2010
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Commit point reached - logical record count 5
    C:\>
    That's not an error, you can see errors within log and bad files.

  • How do I load pics and music onto ipad without another computer

    I bought a IPAD 2 after my home computer crashed. I had all of my Pictures and Music saved on an external hard drive. Problem is I don't have a personal computer to load all of them onto to transfer to my IPAD? Please help!!!

    Unless I am missing something, you can't transfer the music and photos from an external drive to the iPad. You need a computer that has an operating system that can move the files from the drive to the computer and then to the iPad. Or you could sync the content from the drive, I think, but you still need an operating system in order to make the transfer work.

  • Old Hard Drive Fried! How To Add Photos and Music from iPod to iTunes

    Hello! I'm in serious need of some help.
    My old hard drive died without any warning, so I lost everything that was on it. Luckily, my iPod is full of very important photos and all of my music.
    How do I transfer these images and mp3s into iTunes on my new computer?
    I've lost everything else, so the last thing I want to do is lose the only photos I have left along with the gigs and gigs of music I spent months gathering and organizing.
    Please let me know the surest way to transfer these images and music files from my iPod into iTunes.
    Thank you so much for your help! This event has saddened and exhausted me completely.
    All the best,
    Sunshine
    Toshiba Satellite   Windows XP  

    If you have any iTMS purchases the transfer of purchased content from the iPod to authorised computers has been introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
    The transfer of non iTMS content such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there is a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows. The procedure is a bit involved but if you're interested it's posted in this thread: MacMuse - iPod to iTunes
    If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. This is just a selection, you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos and games as well. Have a look at the web pages and documentation, they are generally quite straightforward. You can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
    YamiPod Mac and Windows Versions
    iGadget Windows Only
    iPod Access Mac and Windows Versions
    PodUtil Mac and Windows Versions
    iPodCopy Mac and Windows Versions
    PodPlayer Windows Only
    CopyPod Windows Only
    If your iPod is set to update automatically take care when connecting back to your computer and an empty iTunes. You will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Don't uncheck Sync Music it will be unchecked by default when you choose the manual setting: Managing content manually on iPod
    Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync again. I would also advise that you get yourself an external hard drive and back your stuff up in case you have problems again. External drives are comparatively inexpensive these days and you can get loads of storage for a reasonable outlay.
    For some additional ways to retrieve photos from an iPod try:
    iPodPhotoCopy Windows only
    CopyPodPhoto Windows only
    iPod Photo Liberator Mac & Windows
    Use Disk Mode to copy photos from iPod

  • How to backup apps and music from an iphone 3g using itunes 11

    Hi, my godson has been using an iPhone 3G as an iPod for music and gaming apps. I want to give him my iPhone 4 (not a 4S) and I have iTunes 11 (registered with my appleID) on my Win8 laptop. I've done a Backup of the 3G and then restored to the 4, the settings and photos "transferred" with the Restore operation, but the apps and music didn't "transfer." How do I backup (all apps and music and photos,etc.--everything on the 3G--to the iPhone 4 using iTunes 11. I think I could have done it easily with older versions of iTunes (with the "Explorer" bar on the left side of iTunes), but I can't seem to figure out how to do it with iTunes 11.
    Thanks!

    Read my post here. https://discussions.apple.com/thread/3286150?tstart=0
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • How to transfer images and music from PC (Windows 7) to iPhone?

    Hello:
    Could someone please inform me how can I transfer images and music from a PC (Windows 7) to my iPhone (3GS)?

    Hi, RichardParker,
    I have also meet problems to transfer music from PC to iPhone, and I had solved it now. You can do the following steps,
    1. Copy music to your phone memory
    2. Exported contacts to SD Card (on Android phone) in VCard format
    3. Transfered VCard file from SD Card to PC
    4. Created a Google Account
    5. Opened the Google Account from a browser (on PC), go to Contacts, and then uploaded VCard contacts to the Google account
    6. Configured the iPhone (using a separate Windows user account - so as to allow for importing pictures & videos through iTunes)
    7. Created a "CardDAV" account on the iPhone and synchronised all Contacts
    If you have any question ,you can ask me about iPhone Transfer. And I hope the steps above works.

  • TS1474 How to retrieve contact and music

    we purchased a new lap top and we downloaded itunes.
    I had not updated iphone and so we did it with new computer. after updating and syncing noticed contact info and music did not transfer over to iphone.
    How can I retrieve contact and music.
    please and thank you

    All you have to do is move your libraray from the old cpu to the new one and then do and erase sync

  • How to transfer apps and music on my iphone at my laptop

    How to transfer apps and songs on my iphone at my laptop??? I have autorized itune but i can't transfered!!

    You can transfer itunes purchases only.
    Without syncing:  File>Transfer Purchases

  • How transfer photos, videos and music from iPod classic to Mac?

    I have an iPod classic and trying to transfer my photos, videos and music to the iMac without losing them. The iPod was running on windows software. Any suggstions?

    use yamipod or music rescue to try to get music.

  • How to load doc-level JavaScript via FDF

    I apologize if this question is answered elsewhere on the forum -- I've spent a fair amount of time searching through the forum and other resources brought up in response to Google searches, all without a solid result; therefore I'm hoping that someone in the forum can help out.
    I've got several dozen PDF forms that all use the same core set of JavaScript functions to perform various validation and formatting processes. So far, I've loaded this library as a document-level script in each PDF and then loaded the PDFs to the server.
    When a user requests to view their specific document, the link that they click actually generates an FDF file that is sent to their browser. The FDF causes the target PDF to be loaded in the browser, into which the FDF data is loaded. A page load Script executes the do_DocLoad function, which sets up the document for initial user use (populates combo boxes, etc.) The user then can interact with the form in various ways and then, optionally, submit the data back to the server for processing. The library functions are referenced in various field formatting or validation calls, as well as by the Submit button that I've got on the form that performs a final field validation prior to submission. So far, this process works very well.
    The issue is that every time a change, even a minor one, is needed in any of the core set of library functions, we have to open each and every PDF to apply the change, then save it and upload the entire batch to the server. Because of the significant amount of time that this can take (which will increase as the PDF library grows), I'd like to instead load the JavaScript functions in the FDF.
    The ideal would be a method to allow the FDF to cause Acrobat to load the script from a file on the server, similar to how the PDF is called. Because I don't know if that would even work, I'm looking at having the ASPX page that processes the FDF, merging the user's data into the FDF format before serving it to the browser also merge in the script and serve it all up piping hot for the user's enjoyment (or so we hope). I've tinkered with the FDF, adding a /JavaScript section at the end of the FDF as follows:
        << /V (~data_client_name~)/T (client_name)>>
        << /V (~data_client_address~)/T (client_address)>>]
        /F (~data_FileName~)/ID [ <  blah blah ><  blah blah >]
        /JavaScript << /Doc 2 0 R >>
      >>
    >>
    endobj
    2 0 obj [ (DocScript1) 3 0 R ] endobj
    3 0 obj <<>>
    stream
    ** script goes here **
    endstream
    endobj
    trailer << /Root 1 0 R >>
    %%EOF
    In the section where ** script goes here ** I have attempted to paste the script library, without success. This library consists of several different JavaScript functions.
    In testing, the above didn't work, unfortunately. :-( I got all kinds of wierd data in the form fields that are processed by the functions that I was trying to load - the page open calls didn't return any errors, which was good, but the fields formatted by the initial setup method were all messed up. I'm looking for any pointers/tips on what I might be doing wrong. Are there special characters that I need to escape/avoid in sending JavaScript this way (I'm using regular expression pattern matching and other code within the script which contain some special characters such as /, \, ^, etc.). Is there a limit to the size of the data that I can stream in this way? Is it as simple as loading my script /Before instead of /Doc? Anything else that I might try?
    Thanks in advance for any assistance that can be given! Every time that I get to go back and spend a couple of hours updating the core library in all of these PDFs is time that I'd rather be spending doing other things. Thanks again!

    This sounds very intriguing and not at all along the lines of what I was thinking of. I'm glad to have the forums to be able to get different perspectives on
    things like this!
    I have a couple of additional questions on this. I like #3 but, not having done it before, I'm curious as to how to get it to work.
    I presume that I would create a new batch process in Acrobat (I am running Acrobat Pro 9) and then on each document processed, do the following:
    1. Import a PDF page (from a specified file that has the document-level scripts included.
    2. Delete the page just-added
    3. Save
    4. Repeat, all docs specified.
    Now questions:
    1. I don't understand how the document scripts will be "left behind" when doing this.
    2. Do I need to delete the existing document script(s) before doing this, or will they automagically be overwritten?
    3. Are there any steps between the insert and the delete that I need to do?
    Finally, just to add another twist, have you seen this work with PDFs that are secured (we apply a password to protect the documents from alteration, with the exception of filling out form fields)?
    So far, in testing, the best method appears to be to store the PDFs separate in an un-secured format (it simply won't work if they're secured -- at least, I haven't gotten it to work yet -- I could probably do it interactively, but who wants to type the goofy password 500 times). I have a separate dummy PDF (1 page with just some explanation text if someone opens it and document-level scripts included) also stored in the folder. Then, run the batch process to do the insert, delete, then apply security on all docs in the folder. So far, so good. The only part that doesn't seem to be working is that the document-level scripts on the dummy PDF don't get left behind after the insert/delete. I removed the doc-level scripts on the original PDFs so that I could more easily verify that the ones from the dummy PDF get "left behind". I'm sure that I'm missing something simple here -- If you can help close that final gap, I'd greatly appreciate it!

Maybe you are looking for