Lenovo Yoga 3 14 recovery and Windows 10 upgrade

Hi,
I have a few questions regarding Lenovo Yoga 3 14 recovery and Windows 10 upgrade (should be generic questions that apply to other models as well):
1# Will the Windows 10 update and activation change in any way the Win8.1 OEM serial key stored in BIOS? Is there any chance that any software changes that BIOS OEM key (like malware or similar)?
2# After updating to Windows 10, if I put the USB recovery pen drive (created in Win8.1), will I be able to restore the Win8.1 version (factory restore), and successfully activate it and use it without issues?
3# On a clean drive (without any partitions, like for instance if I buy a new one), if I use the same USB recovery pen drive (created in Win8.1) to do a factory reset, will it re-create all partitions, including the recovery partition one?
Thanks

1) Run the Win 10 installation and choose "Upgrade Windows" option. Windows 10 will be installed and it will be activated.
The chance of any software changing the OEM key is insignificant.
2) Yes, you can recover Win 8.1 successfully. No need to activate it, it will be auto-activated.
3) I dont have experience with this but reading around the forum I have seen that using a recovery drive on a new HDD may not install windows and re-create partitions.
The recovery partition is the hardest to re-create on a new HDD, even you are able to re-create it the NOVO button usually doesnt work.
Let me know if I answered your questions. Thanks.

Similar Messages

  • How to have Snow Leopard, Mavericks with built-in recovery, and Windows 7 (Bootcamp) on my iMac (Intel)?

    I would like to have Snow Leopard, Mavericks with built-in recovery, and Windows 7 (Bootcamp) on my iMac (Intel).  Is this possible?  If so, how?  Currently, I have Snow Leopard and Windows 7 (Bootcamp) running on my iMac.  I have enough disk space to split my Snow Leopard partition.  I have read that if I split my Snow Leopard partition, clone my Snow Leopard partition to the new partition, and boot to the new partition, that I may have problems with the Maverick's upgrade because it may not be able to create the recovery parition, or that it may erase the Windows partition, or that it may mess up the Windows boot process.

    Simplest is to install Mavs on an ext HD, using FW or TB. I don't do windoze, so can't advise about the Boot Camp and multiple volumes issue. Since there's no Boot Camp, I have four volumes running SL through Mavs.

  • Lenovo Energy Management and Windows 10

    Hello everyone (I don't know if this post should be here or in the Windows 10 section, so apologies if it's in the wrong place). I have a Lenovo Z50-70 and the upgrade to Window 10 it's ready to install. I just downloaded all drivers for Windows 10 but I noticed that there is one that doesn't have a Windows 10 version: "Lenovo Energy Management". For me, this is the most useful thing Lenovo has preinstalled in my computer, especially the conservation mode... And it would be extremely annoying to lose this utility. So... Is Lenovo going to release a W10 version of the Energy Management tool? Either way, would the W8.1 version work anyway on Windows 10? Thanks.

    eclank wrote:
    Ok, I just finished doing the clean install and everything works smoothly. I had an issue with the drivers though (the Intel HD control panel didn't work, but I downloaded the most recent version from their website and now it works fine). I didn't have any problems with the Energy Manager with the upgrage nor with the clean installation though.  However, what @dylan6994 says is true, until you reinstall the Energy Manager your battery will be stuck in the mode that it was before the update, so I would recommend to install W10 with the conservation mode disabled.Thank you for the information about Energy Manager as that would suck being stuck at 60%. Is there a thread for Y50-70 Windows 10 Upgrades? I keep seeing various posts about issues with drivers on the Y50-70 and I would like to know if any issues like a concise list. The Y50-70 is listed on the compatibility list but always nice to know what drivers will need to be manually installed. I know there was an issue with nVidia drivers has that been fixed? Anyways, thanks for the heads up! 

  • Lenovo Yoga 13 after Windows 8.1 Upgrade

    After upgrading to Win 8.1, i encountered a number of problems with Audio, and Video these problems were all solved by simple driver updates but one main problem seems to persist. Whenever the screen is tilted outside of laptop mode (when in tent, presentation or tablet mode) the performance of the laptop slows down tremendously. Video and Audio playback is sluggish and the overall system runs slowly until you return it to laptop mode then everything runs smoothly. If anyone can help me with this problem it would be greatly appreciated as i just purchased this product which was not cheap, being a student and all. 
    Thanks for your help.

    Please see this thread http://forums.lenovo.com/t5/Idea-Windows-based-Tab​lets-and/Hey-Lenovo-what-s-up-with-DPTF-amp-Yoga-m​... .
    Everyone who has the same problem should post there!

  • Where do I find my OEM Lenovo Yoga IdeaPad 13 Windows 8 activation key?

    Hello, a couple of days ago, I received my Lenovo Yoga Ideapad 13 in the mail. I turned it on and soon noticed that Lenovo had really screwed the pooch on how they partitioned the device. The SSD was 128GB but only 60GB was given to the C drive. The rest was either on the D drive or in some hidden partition.
    I almost immediately proceeded to do a clean install of Windows 8.
    I procured an ISO of Windows 8 and ran through the install process. For this post, I'm going ot ignore some of the issues I ran into in this process (wifi not working by default) and cut right to my current problem: I cannot legally activate Windows 8 unless I have a valid activation key. Where is this key found?
    The "About Windows 8" post on this very board says that it should be found somewhere on my laptop, but I couldn't find it. I even played with the idea of opening up the ultrabook to see if it was on the inside. I decided to hold off on this until I can get a professional tear-down guide from iFixIt or something.
    In the meantime, where do I find my key?

    It is either on a sticker somewhere on the laptop Usually on the bottom side of the laptop. Or it is attached to a card in the documents that came with laptop. My Toshiba laptop shipped with its Windows 7 code in both places. There was a sticker attached to the bottom of the laptop and there was another Genuine Windows Card that was mixed in with all the manuals that also contained the number. I would look there as well.

  • Lenovo OneKey Recovery for Windows 7 64bit does not work

    Does anyone have a patch or new release link for Lenovo OneKey Recovery? I recently bought a G450 and Win 7 Ultimate-64bit separately, there is no link available in the support and download page under this model yet. I tried installing the Vista 64 bit version and still does not work as well. I did a clean install downloaded the drivers from the Lenovo support page.
    Solved!
    Go to Solution.

    You haven't provided a link to the page you are trying to download from. On top and at the right of most download pages there should be a red loud speaker next to the print page button, just click on it in order to report a faulty download or possible other problems with the page.
    Is the following page the page you were trying to download from? If so you can submit direct feedback if the download doesn't work for you.
    http://support.lenovo.com/en_US/downloads/detail.p​age?DocID=DS009179
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Lenovo Fingerprint keyboard and Windows 10

    Hi,I've done a clean install of Windows 10 Enterprise on my workstation, all good can login with my fingerprint using the Lenovo Preferred fingerprint keyboard and Windows Hello.The issue i have is that when i connect to a different machine via RDP the ability to login via fingerprint is gone, can't see anyway to enable it and it's really helpful.Anyone seen this at all?ThanksAdam

    eclank wrote:
    Ok, I just finished doing the clean install and everything works smoothly. I had an issue with the drivers though (the Intel HD control panel didn't work, but I downloaded the most recent version from their website and now it works fine). I didn't have any problems with the Energy Manager with the upgrage nor with the clean installation though.  However, what @dylan6994 says is true, until you reinstall the Energy Manager your battery will be stuck in the mode that it was before the update, so I would recommend to install W10 with the conservation mode disabled.Thank you for the information about Energy Manager as that would suck being stuck at 60%. Is there a thread for Y50-70 Windows 10 Upgrades? I keep seeing various posts about issues with drivers on the Y50-70 and I would like to know if any issues like a concise list. The Y50-70 is listed on the compatibility list but always nice to know what drivers will need to be manually installed. I know there was an issue with nVidia drivers has that been fixed? Anyways, thanks for the heads up! 

  • Boot partitions with recovery and windows? new SSD drive

    Gang,
    I have a new Retina 15 and bought a larger SSD from OWC. I also upgraded  an older MB Air (from 128 to 240GB) and so I had an OWC Envoy with the original 128G from the MB Air in it. Killer by the way with USB3 support. So I plugged the Envoy into the Retina formatted the Envoy and then used that as a back up for the Retina using Time Machine.
    I swapped out the old drive in the Retina and then put in the new OWC drive and of course the boot recovery partition was not there and so I plugged in the Envoy which had it and formatted the drive then installed from backup and everything worked fine.
    BUT.... I no longer have a recovery or windows partition both of which I would like to have for this machine.
    So how do I do that? Reinstall MT LION?
    Thanks
    Gordon

    Gang,
    Ok here is how you do it!
    First create a MT Lion Recovery disk using Lion Disk Maker:
    http://www.macupdate.com/app/mac/39701/lion-diskmaker
    Then do a time machine backup to some kind of local drive or as I did my TimeCapsule.
    Boot holding down the option key with the Recovery Disk inserted (I made 16 SD card, but a 8G usb stick or the larger DVD writtable drive would work as well) and select to boot to the Recovery Disk. When booted, reformat the root boot drive with GUID partition and then do a full install to your standard boot drive. This will create the recovery partition and load the OS. This is the only way to get the recovery partition created.
    When done then select the Drive option when asked for were to upgrade your machine from. Then select the time machine backup which will load all your stuff.
    Your done!
    Thanks
    Gordon

  • Recue & recovery and Windows 10

    I just tried to make use of the offer and upgrade from W7 to W10. During the upgrade proceedure I got the message (somthing like) "not compatible with recue and recovery" followed by the request to deinstall it. Clearly I hesitate to do that because a lot of recovery and safety features rely on R&R. Now what ???

    Hello A few things to know about that may save you work. The onboard Recovery Partition is a hidden partition and yes it can be cleaned out. But that is a job for Superman not the faint of heart lol..Partition Magic will find it and format it but to get Windows 10 to go to it ? Do Backup disks /Recovery Disks befor you go online of your Win 10 and do new ones about evey 6 to 8 months after you do a Full Recovery. A clean install ? Well first flat line your HDD at a shop or at a friends house useing a proper HDD external USB canister/over $100.00. And you will get a clean install . The proceedures are far to long to put here but require you know Command Prompt ...or purchase a new HDD if that fits your bill ? It cannot be done in your machine without a repair disk which few make. Now if anyone out there has a cure for installing the purchased Acer recovery disks ? And yes I have tried everything under the sun already except buying a new HDD yet again can you please post it big enough for others to enjoy    

  • Acer Switch 10 recovery and Windows 10 Upgrade

    HI
    I am interested will the recovery partition on my Acer Switch 10 be upgraded also to Windows 10 or it will stay wit default Windows 8.1 with Bing?
    Also if I use Acer recovery to create factory USB will it be with with Windows 8.1 with Bing or Upgraded Windows 10 Home version?
    If it stay with Windows 8.1 with Bing after upgrade can I somehow upgrade that recovery partition to Win 10 or? Thanks

    Hello A few things to know about that may save you work. The onboard Recovery Partition is a hidden partition and yes it can be cleaned out. But that is a job for Superman not the faint of heart lol..Partition Magic will find it and format it but to get Windows 10 to go to it ? Do Backup disks /Recovery Disks befor you go online of your Win 10 and do new ones about evey 6 to 8 months after you do a Full Recovery. A clean install ? Well first flat line your HDD at a shop or at a friends house useing a proper HDD external USB canister/over $100.00. And you will get a clean install . The proceedures are far to long to put here but require you know Command Prompt ...or purchase a new HDD if that fits your bill ? It cannot be done in your machine without a repair disk which few make. Now if anyone out there has a cure for installing the purchased Acer recovery disks ? And yes I have tried everything under the sun already except buying a new HDD yet again can you please post it big enough for others to enjoy    

  • I uninstalled Lenovo OneKey Recovery program windows 8 (64 bit)

    I don't care about my back up file, I was planning on making a new one anyways but I can't find any way to download it. I tried getting the Windows 7  64bit version but when I install it it's an entirely different icon and when I open it it says "driver installation failed
    please reinstall application"
    I already have though. 
    can anybody help me by giving me a safe, working download link.

    Dear Andy16
    Welcome to Lenovo forums
    kindly find below the link for the OneKey recovery download for win8 64-bit
    http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS035708
    thanks
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo Yoga 2 Pro windows 10 autorotate broken

    I just upgraded to windows 10.  My autorotate is on, yet it does not work when I go to tent or tablet positions.   I tried clicking tablet mode in the notifications section of windows 10, but still no change.  Please help!

    krg03 wrote:
    Synaptics driver 19.0.13.0Rotate, tablet mode keyboard disabled, tent all work properly.Sensors HID driver 10.0.10240.16384 and sdo 10.0.10240.16384I'm having the rotation problem, too.  In fact, the "Lock rotation of this display" is set to "on" but greyed out so I can't change it. You are sure you got the Synaptics driver 19.0.13.0 from Windows Update?  I can't get newer than 19.0.9.5 (dated 6/29/2015).  Arrrgh. Also one of my sensor drivers is different than yours: HID Sensor Collection V2 - v.10.0.10240.16412 (4/21/2009)Sdo Sensor V2 - v.10.0.10240.16384 (6/21/2006) It's frustrating.  My Yoga no longer does yoga...   

  • Rescue and Recovery and Windows 8.1

    Hi,
    For the last 4 years I used Rescue and Recovery on the my ThinkPads to keep backups (really liked the incremental backup feature) and restore single files when needed.
    I now just got a new X1 Carbon gen3 coming with Windows 8.1 installed by default and lot of the classic ThinkVantage tools are missing. I understood many of these tools doesn't exist anymore or are replaced by "apps".
    But what about Rescue and Recovery? Can't find it anywhere for Windows 8.1 and it's really an important tool.
    Any idea? Did I just miss the link somewhere? It's official and this tools isn't supported (and will never be) on Windows 8.1? Any workaround? (like installing the one of Windows 7 and cross my fingers?)
    Thanks for your input on that (I'm already hating Windows 8.1, luckily Windows 10 will be better ...)
    Solved!
    Go to Solution.

    Thanks to confirm it doesn't exist (for now I hope) for win8/8.1. I will have a look at Windows backup and in the same time think about the downgrade to Windows 7 (also for some other reasons).

  • I just installed cs6 on a Lenovo Yoga 3 and the size of the type on the program is super small.

    I have tried changing the display settings on my computer but that did not help. Help!

    Hi Jkelley531
    try this one : open photoshop--edit--preference--experimental feature--checklist/active on dialog box "scale UI 200% for high density display(windows only)
    If not found you must upgrade to adobe photoshop CC
    regards
    Deto

  • Lenovo Yoga 2 Pro - Windows 8.1 Update 1 - Resolution not clear

    Hello everyone,
    Since the Update 1 of Windows 8.1, the resolution of my Yoga is not really clear.
    Some screenshots to show the problem :
    http://hpics.li/d671deb
    http://hpics.li/e500b70
    Does anyone have the same problem or any fix ?
    Thanks.
    Solved!
    Go to Solution.

    I am running into this same exact problem. Can you guys provide exact instructions (I'm a computer layman) on how to change the scaling so that things look like they were before?
    Everything is fuzzy for me even though I have the highest resolution as always. This happened exactly when I did the new Windows 8.1 update.
    Help appreciated! I created this account just to make this post.

Maybe you are looking for

  • Dropdown state on buttons not working

    I created a navigation bar in Fireworks (which works when I preview), then import it into Dreamweaver as a .cfm file (by clicking on Insert in Dreamweaver, Image Objects, Fireworks html). This navigationbar.cfm file is called from each of my .cfm web

  • I just got my iPhone in the mail

    Just got off the phone with Sprint-I was her first iPhone customer. I am up and running! I couldn't believe that everything automatically synced from my Macbook to my phone. I love this-now to figure out how to use it!

  • Multimapping N:N (Node functions)

    Hello, My problem is structure resultset mapping to rows (header - details). If details is ("emplty" o "null" o "") not register. If details not is ("emplty" o "null" o "") register. Structure SOURCE. Resulset ROW (0..outbound) -ID (Identificador) -H

  • ISight "Camera in use" error!

    When using iChat or Photobooth the iSight camera is always reported as "The Camera is in use by another application". This is not true as iChat is the first item I open after a fresh startup. I have looked far and wide on the Apple support site and v

  • RouteCollection.Ignore doesn't work

    I use RouteCollection with FriendlyUrlSettings to remove aspx from being shown... so now every time someone access my site, instead of display www.mysite.com/login.aspx , it will display www.mysite.com/login But I have a problem where an old app need