Lenovo Z5070 Touchpad not working

Hello everyone,
I bought one lenovo z5070 20 day ago. But at the 3rd of the day touchpad was not working very well. I updated drivers, formatted laptop and tried again. Touchpad working cofusingly. When i touch at touchpad it is not working first after few seconds it is working. But when I'm use mouse and after using mouse ı try to use touchpad again. It is not working again and again.
What could i do for fixing this issue ?
Thanks..
Lenovo Z 5070 Model Name : 20354
Serial Number : 59-432087

Hi Salihyalcin,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with the touchpad not working in your Lenovo Z50-70 laptop.
Try to uninstall the driver and check for the issue, also try to boot the system to the safe mode and check for the issue.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Lenovo N500 touchpad not working

do not working on a laptop touchpad, it does not react to touch, please help me!!!

Hi irakli-18,
Thanks for posting and welcome to the Lenovo Community,
I’d like to help you with the issue that you’re facing and first I’d like to ask you above the top right of the keyboard are four touch sensitive buttons. The far right one disables / enables to touchpad.
I need to ask you when you press on the other touch sensitive buttons are they working except the Touchpad?
Thanks and Best Regards,
Soha
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Lenovo G500 touchpad not working

I bought a lenovo G500 laptop around 6 months ago.So far everything was good enough but suddenly my touchpad has stopped working.I looked up in the manual and used the function key (F6) to enable/disable it but this is also not working.If I plug in the usb mouse then it works fine.Di I need to reinstall touchpad drivers? Help pls...

hi Prathibha,
Welcome to the Lenovo forums!
YES,
I would consider as my first step on throubleshooting this.
Open Device Manager and under Mice and Gaming controllers, Rightclick and Uninstall the Synaptics or ELan touchpad,
Restart the system and Install the driver back,
Windows 7
Touchpad Driver (Synaptics, Elan)
Windows 8
Touchpad Driver (Synaptics, Elan) for 64-bit Windows
Windows 8.1
Touchpad Driver (Synaptics, Elan)
Let me know your findings
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

MSI GS70 20D Touchpad not working after login when I upgraded to 8.1

Short situation: I upgraded my laptop to windows 8.1, and the touchpad stopped working on the start/desktop screens. I could move it before I logged in, and after it would work for a few seconds, but then it would just stop. An external mouse works just fine, but I still don't want my touchpad not working.
I looked on the MSI USA technical support page, and it said to delete the old drivers for the touchpad and download new ones. I deleted the drives, but every time I try to download the new ones, I get a window that says my touchpad isn't plugged in, and that the drive isn't compatible with my touchpad, which doesn't make sense to me because I looked up my product specifically and tried all three touchpad drivers. None of them worked.
Now I can't use the touchpad at all because I deleted the drivers, so it would seem that the computer doesn't know it has a touchpad because it won't register the touchpad in my devices tab.
Does anyone know what I can do to solve this? Or to at least get the touchpad to register again? I just got this computer for Christmas, I've treated it very well so it hasn't banged up against anything or been dropped or mistreated, so I cannot understand why this is happening. It worked before the 8.1 update, so I'm pretty sure the issue has something to do with that.

UPDATE: So I managed to fix the touch pad by deleting the driver and rebooting, which is weird because I removed the driver completely and never reinstalled it, so the computer shouldn't really know it has a touch pad. But every time I reboot the computer after fixing it, the touch pad goes back to it's old problem and I need to redelete and reboot all over again.
Also, My computer has begun to randomly freeze and not respond to anything, with one such event leading to a blue screen with a WHEA_UNCORRECTABLE_ERROR message. The computer has frozen a total of 6 times, at different moments; when I'm typing on microsoft word, at the login screen, even right when it starts up and the msi loading screen is up. 5 of these times have required a forced shut down, the first time the computer shut off on it's own because it ran out of battery power.
Finally, my computer has begun to periodically for long stretches of time stopped detecting wireless networks and is asking to be plugged into an ethernet cable to connect to the internet. This has never happened to me before, and I know I haven't turned off my network sharing center.
I'm not sure why this is all suddenly happening. It's not like I'm banging my laptop against walls. I'm very careful when I move and use my GS70, so these problems are greatly concerning to me because I just got this computer at Christmas.

Touchpad not working indecate yellow light

touchpad not working indecate yellow light

I think it is telling you that you need a firmware update. Happend to me

HP Pavilion g6-1c39ca touchpad not working

Hi, so i turned on my laptop today to find my touchpad not working, I did not change any of the settings. I am unable to enable the touchpad by tapping the cirlcle in the corner of the touchpad as it is broken. I tried to go to control panel-mouse-hardware and sound-mouse but there is no tab for device settings. After reading a couple of questions in the support forum I then downloaded the synaptic touchpad driver from hp support, but it could not be intalled correctly on my computer. Can someone please help me with this issue.

Hi @thomasand ,
Welcome to the HP Forums!
It is a superb place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that your TouchPad/ClickPad has stopped working. The round button in the upper left corner of the TouchPad is non functional. You went to the control panel-mouse-hardware and sound-mouse but there is no tab for device settings.
You tried downloading the software and drivers but were unable to install them.
Here is a link to HP Notebook PCs - Using and Configuring the TouchPad (Windows 7 and Vista) that may help.
If you still have this difficulty please contact HP support for assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Keyboard and touchpad not working after Windows 10 update

after udating windows 10 on my probook 4440s keyboard and touchpad not working. if i press a key for 10seconds the key then shows up in the screen. and touchpad is worst. it freezes all the time barely moves. but with usb mouse it works fine

It's known that installing Windows from an external DVD drive on a Mid 2013 MacBook Air causes that the keyboard doesn't work after finishing the installation. The fix is to install Windows by using a USB drive. See > http://support.apple.com/kb/TS4599

Yoga 13 touchpad not working at one spot

Hi,
i bought an Ideapad Yoga 13 from amazon and it has one problem. One spot on the left side of the touchpad is not working. When I move my finger to that point, the cursor does not move and the little icon in the notification area of Windows 8 does not show any pressure. The area goes from top to the bottom of the touchpad but is only a few millimeters wide. This is very annoying when I move my finger from one side of the touchpad to the other for example when I'm dragging something with the cursor, because at this point the cursor just stops.
Could this be a problem with the driver or is my touchpad faulty and I should just send the Yoga 13 back? Also do I send it to amazon or lenovo?
Thanks for any answers and suggestions.

hi pagefault,
Welcome to Lenovo Community Forums!
One way to try this out is to Uninstall the Synaptics Driver and try the touchpad using windows driver if it still the same.
To Remove Synaptics Driver:
Go and open Control Panel / Programs and Feature / uninstall a program
You will see Synaptics as one of the programs, Uninstall that and restart the Computer.
Once restarted Try the touchpad and see if the problem is still there.
    Verify that the synaptics driver is uninstalled by Checking the mouse properties
                Open Control Panel / Hardware and Sound / Mouse
      This option should be gone if the synaptics driver is uninstalled
If Without a driver, you're still having the same issue I would consider this as a Hardware Concern.
You can contact Amazon or Lenovo Technical Support about the issue.
If the problem disappeared without a driver
Try reinstalling the Synaptics driver by downloading and installing this
Synaptics TouchPad Driver for 64-bit Windows
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Left button of touchpad not working

left button of touchpad of my laptop G550 is not working, please help

hi jspanwar.
it is usually hardware issue that touchpad left/right button not working. if you have valid warranty, you can call lenovo support line for further informations.
but, before, can you check if the issue persists on safe mode?

My new Lenovo IdeaPad N580 not working well :(

Hello, I have a Lenovo IdeaPad N580 with build-in windos 8 OEM. I got from my uncle, came from abroad. now a days it does not wark as well. Problems, 1. Sometimes touchpad seems to be hanging when I working. But with external usb mouse it works fine. 2. Some keys are not working like u, k 3. When my system run first..... If I doule click on any icon in desktop to open it...... It accept the command as "Delete"... I seems just I want to delete the icon.... by the way I want to open the program/drive. When the hidden command is executed..... I find the icon/folder/file anything in "Recycle Bin"..... and command seems to be unlimited (multiple times).... My observation in this issue: System might be work in self!! also in Windows "safe mode" I tried to fix up it by "System Recovery" and "System Resetting". But no result Please help me to fix the problem Regards, P Delwar

Bring all the express to the same room as the mac you are using to setup the network..
One by one, plug them in and do full factory reset on them.. they should then show up in the Airport utility as Other Wi-Fi devices (1) and you can select them and continue the setup.
If that fails try using the airport utility on ipad or iphone as they are far less problematic than Yosemite in particular.

U410 a year old, touchpad not working, have to turn it off, otherwise it clicks everything.

I have a U410, and it's a year and a half old. Touchpad is not working, so I turn it off to do anything. If I don't, it thinks I'm clicking on everything, thus causing tons of problems, freakouts, etc.

Hi Apache05,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with touchpad in your Lenovo U410 laptop.
Try to boot the system into safe mode and check for the issue, also try to update the driver to the latest version and check for the issue.
Click here for the touchpad drivers for windows 8.
Click here for the touchpad for windows 7.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Lenovo AIO C440 - not working infrared remote control

Hello,
is there any hint how to get infrared remote control working for a new C440 model? Tomorrow I will try to measure and/or replace batteries which could be bad. For now it is totally not working.
Another question: the remote should work only within AverMedia TV app or in the whole Windows 8?
Regards,
Zdenek

hi bohdik,
Welcome to the Lenovo Forums.
The IR Windows Media Center remote control is for use with C440 models with optional TV tuner. If you have this model, make sure the TV Tuner driver and the ITE CIR Driver from the lenovo support site are installed under Device Manager (press Windows Key+R then type devmgmt.msc) then follow the Set up a TV signal in Windows Media Center. guide.
Note:
You must have Windows 8 PRO to enable Windows Media Center
See this articles in reference:
How to add Windows Media Center to Windows 8 Pro
How To Install And Set Up Media Center On Windows 8
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Touchpad not working after suspend/resume on Asus R409LD

Hello,
I have installed Arch on my Asus laptop and I had issues with the FocalTech touchpad being detected as a generic mouse. This problem is now fixed in the mainline kernel which I use (cf https://wiki.archlinux.org/index.php/AS … #Touch_Pad).
However I still have a problem : when I suspend/resume my laptop, the touchpad ceases working.
Here is the output of xinput before suspending :
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ FocalTechPS/2 FocalTech FocalTech Touchpad id=13 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Video Bus id=8 [slave keyboard (3)]
↳ Sleep Button id=9 [slave keyboard (3)]
↳ USB Camera id=10 [slave keyboard (3)]
↳ Asus WMI hotkeys id=11 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
I tried deactivating and reactivating psmouse but it doesn't work.
Wierdly, the touchpad is still listed by xinput after resuming, but doesn't work. And when I disable/enable psmouse it disappears from the output.
Here is a full dmseg with suspend/resume if it may help :
[ 0.000000] CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.0-1-mainline (auguste@hal) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Mar 14 14:53:37 CET 2015
[ 0.000000] Command line: initrd=/intel-ucode.img initrd=/initramfs-linux-mainline.img root=/dev/sda2 rw rootfstype=ext4 acpi_osi=
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b9d7dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9d7e000-0x00000000b9d84fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b9d85000-0x00000000ba5dafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ba5db000-0x00000000ba85afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ba85b000-0x00000000c98b4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c98b5000-0x00000000c9ac9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c9aca000-0x00000000c9e0efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9e0f000-0x00000000cab1cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cab1d000-0x00000000caffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cbc00000-0x00000000cfdfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001af1fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0xba86a018-0xba877e57] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000b9d7dfff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b9d7e000-0x00000000b9d84fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000b9d85000-0x00000000ba5dafff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ba5db000-0x00000000ba85afff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ba85b000-0x00000000ba86a017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ba86a018-0x00000000ba877e57] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ba877e58-0x00000000c98b4fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c98b5000-0x00000000c9ac9fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000c9aca000-0x00000000c9e0efff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c9e0f000-0x00000000cab1cfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000cab1d000-0x00000000caffefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000cafff000-0x00000000caffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cbc00000-0x00000000cfdfffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000001af1fffff] usable
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xc9e93000 ACPI 2.0=0xc9e93000 SMBIOS=0xcaf46318
[ 0.000000] efi: mem00: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000007000-0x0000000000058000) (0MB)
[ 0.000000] efi: mem03: [Reserved | | | | | |WB|WT|WC|UC] range=[0x0000000000058000-0x0000000000059000) (0MB)
[ 0.000000] efi: mem04: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000059000-0x000000000009e000) (0MB)
[ 0.000000] efi: mem05: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009e000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem06: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem07: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000001000000-0x0000000001e39000) (14MB)
[ 0.000000] efi: mem08: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000001e39000-0x000000007fc02000) (2013MB)
[ 0.000000] efi: mem09: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000007fc02000-0x0000000080000000) (3MB)
[ 0.000000] efi: mem10: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000080000000-0x00000000b687a000) (872MB)
[ 0.000000] efi: mem11: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000b687a000-0x00000000b697a000) (1MB)
[ 0.000000] efi: mem12: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b697a000-0x00000000b7f44000) (21MB)
[ 0.000000] efi: mem13: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000b7f44000-0x00000000b7f45000) (0MB)
[ 0.000000] efi: mem14: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x00000000b7f45000-0x00000000b9d7e000) (30MB)
[ 0.000000] efi: mem15: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000b9d7e000-0x00000000b9d85000) (0MB)
[ 0.000000] efi: mem16: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b9d85000-0x00000000b9ed9000) (1MB)
[ 0.000000] efi: mem17: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000b9ed9000-0x00000000ba59b000) (6MB)
[ 0.000000] efi: mem18: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba59b000-0x00000000ba5b8000) (0MB)
[ 0.000000] efi: mem19: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000ba5b8000-0x00000000ba5d2000) (0MB)
[ 0.000000] efi: mem20: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba5d2000-0x00000000ba5db000) (0MB)
[ 0.000000] efi: mem21: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000ba5db000-0x00000000ba85b000) (2MB)
[ 0.000000] efi: mem22: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba85b000-0x00000000ba86a000) (0MB)
[ 0.000000] efi: mem23: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba86a000-0x00000000ba879000) (0MB)
[ 0.000000] efi: mem24: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ba879000-0x00000000c72f8000) (202MB)
[ 0.000000] efi: mem25: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c72f8000-0x00000000c735c000) (0MB)
[ 0.000000] efi: mem26: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c735c000-0x00000000c7375000) (0MB)
[ 0.000000] efi: mem27: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c7375000-0x00000000c7395000) (0MB)
[ 0.000000] efi: mem28: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c7395000-0x00000000c73a5000) (0MB)
[ 0.000000] efi: mem29: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c73a5000-0x00000000c74af000) (1MB)
[ 0.000000] efi: mem30: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c74af000-0x00000000c74b0000) (0MB)
[ 0.000000] efi: mem31: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c74b0000-0x00000000c8c37000) (23MB)
[ 0.000000] efi: mem32: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c8c37000-0x00000000c95f3000) (9MB)
[ 0.000000] efi: mem33: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000c95f3000-0x00000000c98b5000) (2MB)
[ 0.000000] efi: mem34: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000c98b5000-0x00000000c9a55000) (1MB)
[ 0.000000] efi: mem35: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000c9a55000-0x00000000c9aca000) (0MB)
[ 0.000000] efi: mem36: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c9aca000-0x00000000c9e0f000) (3MB)
[ 0.000000] efi: mem37: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000c9e0f000-0x00000000caad9000) (12MB)
[ 0.000000] efi: mem38: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000caad9000-0x00000000caaf9000) (0MB)
[ 0.000000] efi: mem39: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000caaf9000-0x00000000caafd000) (0MB)
[ 0.000000] efi: mem40: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000caafd000-0x00000000cab00000) (0MB)
[ 0.000000] efi: mem41: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000cab00000-0x00000000cab1d000) (0MB)
[ 0.000000] efi: mem42: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000cab1d000-0x00000000cae70000) (3MB)
[ 0.000000] efi: mem43: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000cae70000-0x00000000caea7000) (0MB)
[ 0.000000] efi: mem44: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000caea7000-0x00000000caea9000) (0MB)
[ 0.000000] efi: mem45: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000caea9000-0x00000000caf48000) (0MB)
[ 0.000000] efi: mem46: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000caf48000-0x00000000caf6c000) (0MB)
[ 0.000000] efi: mem47: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000caf6c000-0x00000000cafff000) (0MB)
[ 0.000000] efi: mem48: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000cafff000-0x00000000cb000000) (0MB)
[ 0.000000] efi: mem49: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x00000001af200000) (2802MB)
[ 0.000000] efi: mem50: [Reserved |RUN| | | | | | | | ] range=[0x00000000cbc00000-0x00000000cfe00000) (66MB)
[ 0.000000] efi: mem51: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem52: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem53: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem54: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem55: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem56: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. X450LD/X450LD, BIOS X450LD.208 06/11/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1af200 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F00000000 write-back
[ 0.000000] 1 base 0100000000 mask 7F80000000 write-back
[ 0.000000] 2 base 0180000000 mask 7FC0000000 write-back
[ 0.000000] 3 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 5 base 00CC000000 mask 7FFC000000 uncachable
[ 0.000000] 6 base 00CBC00000 mask 7FFFC00000 uncachable
[ 0.000000] 7 base 01B0000000 mask 7FF0000000 uncachable
[ 0.000000] 8 base 01AF800000 mask 7FFF800000 uncachable
[ 0.000000] 9 base 01AF400000 mask 7FFFC00000 uncachable
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xcbc00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b2d000, 0x01b2dfff] PGTABLE
[ 0.000000] BRK [0x01b2e000, 0x01b2efff] PGTABLE
[ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1af000000-0x1af1fffff]
[ 0.000000] [mem 0x1af000000-0x1af1fffff] page 2M
[ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1a0000000-0x1aeffffff]
[ 0.000000] [mem 0x1a0000000-0x1aeffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x180000000-0x19fffffff]
[ 0.000000] [mem 0x180000000-0x19fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xb9d7dfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xb9bfffff] page 2M
[ 0.000000] [mem 0xb9c00000-0xb9d7dfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xb9d85000-0xba5dafff]
[ 0.000000] [mem 0xb9d85000-0xb9dfffff] page 4k
[ 0.000000] [mem 0xb9e00000-0xba3fffff] page 2M
[ 0.000000] [mem 0xba400000-0xba5dafff] page 4k
[ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xba85b000-0xc98b4fff]
[ 0.000000] [mem 0xba85b000-0xba9fffff] page 4k
[ 0.000000] [mem 0xbaa00000-0xc97fffff] page 2M
[ 0.000000] [mem 0xc9800000-0xc98b4fff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xc9aca000-0xc9e0efff]
[ 0.000000] [mem 0xc9aca000-0xc9bfffff] page 4k
[ 0.000000] [mem 0xc9c00000-0xc9dfffff] page 2M
[ 0.000000] [mem 0xc9e00000-0xc9e0efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcafff000-0xcaffffff]
[ 0.000000] [mem 0xcafff000-0xcaffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[ 0.000000] [mem 0x100000000-0x17fffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x7fc02000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000C9E93000 000024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 0x00000000C9E93090 0000AC (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000C9EA9800 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000C9E93258 0165A6 (v02 _ASUS_ Notebook 00000012 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000CAB1BF80 000040
[ 0.000000] ACPI: APIC 0x00000000C9EA9910 000072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000C9EA9988 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x00000000C9EA99D0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: LPIT 0x00000000C9EA9A98 000094 (v01 ALASKA 00000000 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C9EA9B30 000174 (v01 Intel zpoddult 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000C9EA9CA8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000C9EAA1E8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: MCFG 0x00000000C9EAACC0 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000C9EAAD00 00306D (v01 DptfTa DptfTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: HPET 0x00000000C9EADD70 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C9EADDA8 000298 (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000C9EAE040 003EE7 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000C9EB1F28 000CA1 (v01 SgRef SgPch 00001000 INTL 20120711)
[ 0.000000] ACPI: BGRT 0x00000000C9EB2BD0 000038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013)
[ 0.000000] ACPI: SSDT 0x00000000C9EB2C08 001480 (v01 OptRef OptTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: MSDM 0x00000000C9AC7E18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001af1fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1af1f5000-0x1af1f8fff]
[ 0.000000] [ffffea0000000000-ffffea0006bfffff] PMD -> [ffff8801a8800000-ffff8801ae7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001af1fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b9d7dfff]
[ 0.000000] node 0: [mem 0x00000000b9d85000-0x00000000ba5dafff]
[ 0.000000] node 0: [mem 0x00000000ba85b000-0x00000000c98b4fff]
[ 0.000000] node 0: [mem 0x00000000c9aca000-0x00000000c9e0efff]
[ 0.000000] node 0: [mem 0x00000000cafff000-0x00000000caffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001af1fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001af1fffff]
[ 0.000000] On node 0 totalpages: 1542928
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12838 pages used for memmap
[ 0.000000] DMA32 zone: 821620 pages, LIFO batch:31
[ 0.000000] Normal zone: 11208 pages used for memmap
[ 0.000000] Normal zone: 717312 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xcbe00000-0xcfdfffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9d7e000-0xb9d84fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba5db000-0xba85afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba86a000-0xba86afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba877000-0xba877fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc98b5000-0xc9ac9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9e0f000-0xcab1cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcab1d000-0xcaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcbbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcbc00000-0xcfdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcfe00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff8801aee00000 s87128 r8192 d31656 u524288
[ 0.000000] pcpu-alloc: s87128 r8192 d31656 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1518797
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=/intel-ucode.img initrd=/initramfs-linux-mainline.img root=/dev/sda2 rw rootfstype=ext4 acpi_osi=
[ 0.000000] ACPI: _OSI method disabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5953756K/6171712K available (5573K kernel code, 893K rwdata, 1788K rodata, 1168K init, 1156K bss, 217956K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:728 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] tsc: Detected 2394.353 MHz processor
[ 0.000040] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.23 BogoMIPS (lpj=7981176)
[ 0.000044] pid_max: default: 32768 minimum: 301
[ 0.000050] ACPI: Core revision 20150204
[ 0.034560] ACPI: All ACPI Tables successfully acquired
[ 0.036629] Security Framework initialized
[ 0.036636] Yama: becoming mindful.
[ 0.037324] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.039478] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.040415] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.040428] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.040670] Initializing cgroup subsys blkio
[ 0.040674] Initializing cgroup subsys memory
[ 0.040681] Initializing cgroup subsys devices
[ 0.040684] Initializing cgroup subsys freezer
[ 0.040686] Initializing cgroup subsys net_cls
[ 0.040715] CPU: Physical Processor ID: 0
[ 0.040716] CPU: Processor Core ID: 0
[ 0.040721] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.040722] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.041941] mce: CPU supports 7 MCE banks
[ 0.041957] CPU0: Thermal monitoring enabled (TM1)
[ 0.041970] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.041972] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.042092] Freeing SMP alternatives memory: 20K (ffffffff81a05000 - ffffffff81a0a000)
[ 0.043116] Ignoring BGRT: invalid status 0 (expected 1)
[ 0.044495] ftrace: allocating 21346 entries in 84 pages
[ 0.056747] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.089782] TSC deadline timer enabled
[ 0.089786] smpboot: CPU0: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (fam: 06, model: 45, stepping: 01)
[ 0.089816] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.089843] ... version: 3
[ 0.089844] ... bit width: 48
[ 0.089845] ... generic registers: 4
[ 0.089847] ... value mask: 0000ffffffffffff
[ 0.089848] ... max period: 0000ffffffffffff
[ 0.089849] ... fixed-purpose events: 3
[ 0.089850] ... event mask: 000000070000000f
[ 0.109937] x86: Booting SMP configuration:
[ 0.109940] .... node #0, CPUs: #1
[ 0.122572] CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.126042] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.129984] #2 #3
[ 0.165939] x86: Booted up 1 node, 4 CPUs
[ 0.165943] smpboot: Total of 4 processors activated (19162.94 BogoMIPS)
[ 0.170937] devtmpfs: initialized
[ 0.173870] PM: Registering ACPI NVS region [mem 0xb9d7e000-0xb9d84fff] (28672 bytes)
[ 0.173872] PM: Registering ACPI NVS region [mem 0xc9e0f000-0xcab1cfff] (13688832 bytes)
[ 0.174282] pinctrl core: initialized pinctrl subsystem
[ 0.174328] RTC time: 14:49:34, date: 03/14/15
[ 0.174468] NET: Registered protocol family 16
[ 0.187440] cpuidle: using governor ladder
[ 0.200788] cpuidle: using governor menu
[ 0.200839] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.200841] ACPI: bus type PCI registered
[ 0.200843] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.200934] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.200937] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.201048] PCI: Using configuration type 1 for base access
[ 0.214532] ACPI: Added _OSI(Module Device)
[ 0.214535] ACPI: Added _OSI(Processor Device)
[ 0.214536] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.214538] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.218484] ACPI : EC: EC description table is found, configuring boot EC
[ 0.222593] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.234176] ACPI: Dynamic OEM Table Load:
[ 0.234185] ACPI: SSDT 0xFFFF8801A7134800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.235459] ACPI: Dynamic OEM Table Load:
[ 0.235467] ACPI: SSDT 0xFFFF8801A709A000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.236797] ACPI: Dynamic OEM Table Load:
[ 0.236803] ACPI: SSDT 0xFFFF8801A7114A00 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.238841] ACPI: Interpreter enabled
[ 0.238853] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[ 0.238863] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.238892] ACPI: (supports S0 S3 S4 S5)
[ 0.238894] ACPI: Using IOAPIC for interrupt routing
[ 0.238931] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.240682] ACPI: Power Resource [PC05] (on)
[ 0.255005] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.255012] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff8801a84aeaf0), AE_NOT_FOUND (20150204/psparse-536)
[ 0.255033] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.255037] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff8801a84aeaf0), AE_NOT_FOUND (20150204/psparse-536)
[ 0.256966] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.256974] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.257651] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.258130] PCI host bridge to bus 0000:00
[ 0.258134] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.258137] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.258139] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.258141] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.258143] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.258145] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.258147] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.258149] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.258151] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.258153] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.258155] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.258157] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.258159] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff window]
[ 0.258169] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.258303] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.258318] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.258327] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.258334] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.258456] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.258467] pci 0000:00:03.0: reg 0x10: [mem 0xf7a1c000-0xf7a1ffff 64bit]
[ 0.258597] pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
[ 0.258612] pci 0000:00:04.0: reg 0x10: [mem 0xf7a10000-0xf7a17fff 64bit]
[ 0.258761] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.258781] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
[ 0.258849] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.258907] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.258954] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.258975] pci 0000:00:16.0: reg 0x10: [mem 0xf7a25000-0xf7a2501f 64bit]
[ 0.259046] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.259156] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.259173] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a18000-0xf7a1bfff 64bit]
[ 0.259250] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.259309] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.259353] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.259428] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.259489] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.259533] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[ 0.259611] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.259672] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.259717] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 0.259794] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.259855] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.259900] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[ 0.259977] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.260053] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.260107] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.260130] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a23000-0xf7a233ff]
[ 0.260231] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.260306] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.260356] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.260569] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.260586] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.260595] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.260603] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.260611] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.260619] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.260627] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a22000-0xf7a227ff]
[ 0.260670] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.260765] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.260781] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a21000-0xf7a210ff 64bit]
[ 0.260803] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.260996] acpiphp: Slot [1] registered
[ 0.261002] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.261103] pci 0000:02:00.0: [1969:10a1] type 00 class 0x020000
[ 0.261131] pci 0000:02:00.0: reg 0x10: [mem 0xf7900000-0xf793ffff 64bit]
[ 0.261144] pci 0000:02:00.0: reg 0x18: [io 0xe000-0xe07f]
[ 0.261271] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.261309] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.267583] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.267587] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.267591] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.269364] pci 0000:03:00.0: [1814:3290] type 00 class 0x028000
[ 0.269385] pci 0000:03:00.0: reg 0x10: [mem 0xf7810000-0xf781ffff]
[ 0.269534] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.269571] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.271295] pci 0000:03:00.1: [1814:3298] type 00 class 0x0d1100
[ 0.271315] pci 0000:03:00.1: reg 0x10: [mem 0xf7800000-0xf780ffff]
[ 0.271464] pci 0000:03:00.1: supports D1
[ 0.271466] pci 0000:03:00.1: PME# supported from D0 D1 D3hot D3cold
[ 0.279635] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.279641] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.279744] pci 0000:04:00.0: [10de:1140] type 00 class 0x030200
[ 0.279769] pci 0000:04:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.279792] pci 0000:04:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.279816] pci 0000:04:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.279831] pci 0000:04:00.0: reg 0x24: [io 0xd000-0xd07f]
[ 0.279847] pci 0000:04:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.279982] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.284661] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.284665] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.284668] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.284674] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.284707] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.285766] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.285822] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.285876] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.285928] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.285979] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.286029] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.286080] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.286131] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.286172] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.286178] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff8801a84aeaf0), AE_NOT_FOUND (20150204/psparse-536)
[ 0.286526] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.286627] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.286757] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.286760] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.286764] vgaarb: loaded
[ 0.286765] vgaarb: bridge control possible 0000:00:02.0
[ 0.286917] PCI: Using ACPI for IRQ routing
[ 0.288384] PCI: pci_cache_line_size set to 64 bytes
[ 0.288438] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.288440] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.288442] e820: reserve RAM buffer [mem 0xb9d7e000-0xbbffffff]
[ 0.288444] e820: reserve RAM buffer [mem 0xba5db000-0xbbffffff]
[ 0.288445] e820: reserve RAM buffer [mem 0xba86a018-0xbbffffff]
[ 0.288447] e820: reserve RAM buffer [mem 0xc98b5000-0xcbffffff]
[ 0.288449] e820: reserve RAM buffer [mem 0xc9e0f000-0xcbffffff]
[ 0.288451] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[ 0.288453] e820: reserve RAM buffer [mem 0x1af200000-0x1afffffff]
[ 0.288579] NetLabel: Initializing
[ 0.288580] NetLabel: domain hash size = 128
[ 0.288581] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.288596] NetLabel: unlabeled traffic allowed by default
[ 0.288627] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.288633] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.290662] Switched to clocksource hpet
[ 0.296419] pnp: PnP ACPI init
[ 0.296545] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.296549] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.296845] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.296848] system 00:01: [io 0xffff] has been reserved
[ 0.296850] system 00:01: [io 0xffff] has been reserved
[ 0.296852] system 00:01: [io 0xffff] has been reserved
[ 0.296854] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.296856] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.296859] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.296861] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.296863] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.296865] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.296868] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.296905] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.296966] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.296969] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.297030] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.297033] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.297073] system 00:05: [io 0x0240-0x0259] has been reserved
[ 0.297075] system 00:05: [io 0x0380-0x038f] has been reserved
[ 0.297077] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.297149] pnp 00:06: Plug and Play ACPI device, IDs FLT0102 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.297194] pnp 00:07: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.297753] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.297756] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.297759] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.297762] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.297765] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.297768] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.297771] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.297774] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.297777] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.297780] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.297783] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 0.297785] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.297789] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.297888] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.298113] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.298119] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff8801a84aeaf0), AE_NOT_FOUND (20150204/psparse-536)
[ 0.298320] pnp: PnP ACPI: found 10 devices
[ 0.304961] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.304974] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.304978] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.304983] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.304991] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.304996] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.305004] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.305007] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.305012] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.305016] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.305023] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.305026] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.305028] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.305030] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.305032] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.305034] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.305036] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.305038] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.305040] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.305042] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.305044] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.305046] pci_bus 0000:00: resource 15 [mem 0xcfe00000-0xfeafffff window]
[ 0.305049] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.305051] pci_bus 0000:02: resource 1 [mem 0xf7900000-0xf79fffff]
[ 0.305053] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.305055] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.305057] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.305059] pci_bus 0000:04: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.305092] NET: Registered protocol family 2
[ 0.305327] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.305508] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.305650] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.305671] TCP: reno registered
[ 0.305686] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.305719] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.305779] NET: Registered protocol family 1
[ 0.305797] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.306052] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
[ 0.306077] PCI: CLS 64 bytes, default 64
[ 0.306126] Unpacking initramfs...
[ 0.388937] Freeing initrd memory: 4088K (ffff88007fc02000 - ffff880080000000)
[ 0.388947] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.388951] software IO TLB [mem 0xc32f8000-0xc72f8000] (64MB) mapped at [ffff8800c32f8000-ffff8800c72f7fff]
[ 0.389171] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.389230] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
[ 0.389238] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
[ 0.389248] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
[ 0.389258] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
[ 0.389313] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.389343] Scanning for low memory corruption every 60 seconds
[ 0.389619] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.389637] Initialise system trusted keyring
[ 0.390008] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.391638] zpool: loaded
[ 0.391641] zbud: loaded
[ 0.391847] VFS: Disk quotas dquot_6.5.2
[ 0.391886] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.392076] Key type big_key registered
[ 0.392275] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.392313] io scheduler noop registered
[ 0.392316] io scheduler deadline registered
[ 0.392350] io scheduler cfq registered (default)
[ 0.393087] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.393092] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.393109] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.393111] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.393115] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.393130] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.393132] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.393134] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
[ 0.393138] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.393154] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.393156] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.393160] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.393168] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.393186] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.393205] efifb: probing for efifb
[ 0.393226] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90004f00000, using 4128k, total 4128k
[ 0.393228] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 0.393229] efifb: scrolling: redraw
[ 0.393231] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.396869] Console: switching to colour frame buffer device 170x48
[ 0.400357] fb0: EFI VGA frame buffer device
[ 0.400367] intel_idle: MWAIT substates: 0x11142120
[ 0.400369] intel_idle: v0.4 model 0x45
[ 0.400370] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.400674] GHES: HEST is not enabled!
[ 0.400759] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.401281] Linux agpgart interface v0.103
[ 0.401345] rtc_cmos 00:02: RTC can wake from S4
[ 0.401480] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.401510] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.401526] Intel P-state driver initializing.
[ 0.401679] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.402207] TCP: cubic registered
[ 0.402436] NET: Registered protocol family 10
[ 0.402861] NET: Registered protocol family 17
[ 0.403549] Loading compiled-in X.509 certificates
[ 0.403578] registered taskstats version 1
[ 0.404855] Magic number: 7:305:839
[ 0.405045] rtc_cmos 00:02: setting system clock to 2015-03-14 14:49:34 UTC (1426344574)
[ 0.405254] PM: Hibernation image not present or could not be loaded.
[ 0.405865] Freeing unused kernel memory: 1168K (ffffffff818e1000 - ffffffff81a05000)
[ 0.405869] Write protecting the kernel read-only data: 8192k
[ 0.406503] Freeing unused kernel memory: 560K (ffff880001574000 - ffff880001600000)
[ 0.406722] Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
[ 0.415600] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.428621] sdhci: Secure Digital Host Controller Interface driver
[ 0.428624] sdhci: Copyright(c) Pierre Ossman
[ 0.432810] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.434654] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.434686] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.438789] ACPI: bus type USB registered
[ 0.438822] usbcore: registered new interface driver usbfs
[ 0.438836] usbcore: registered new interface driver hub
[ 0.438866] usbcore: registered new device driver usb
[ 0.439456] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.439732] ehci-pci: EHCI PCI platform driver
[ 0.439788] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.439796] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.439810] ehci-pci 0000:00:1d.0: debug port 2
[ 0.440689] SCSI subsystem initialized
[ 0.441807] libata version 3.00 loaded.
[ 0.443716] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.443738] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a23000
[ 0.450881] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.457612] hub 1-0:1.0: USB hub found
[ 0.457623] hub 1-0:1.0: 2 ports detected
[ 0.457875] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.457882] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.457958] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00003810
[ 0.457964] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.458152] hub 2-0:1.0: USB hub found
[ 0.458161] hub 2-0:1.0: 9 ports detected
[ 0.460386] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.460389] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.460507] hub 3-0:1.0: USB hub found
[ 0.460513] hub 3-0:1.0: 4 ports detected
[ 0.461400] ahci 0000:00:1f.2: version 3.0
[ 0.461544] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.474228] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[ 0.474234] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
[ 0.474875] scsi host0: ahci
[ 0.475020] scsi host1: ahci
[ 0.475159] scsi host2: ahci
[ 0.475279] scsi host3: ahci
[ 0.475335] ata1: SATA max UDMA/133 abar m2048@0xf7a22000 port 0xf7a22100 irq 45
[ 0.475337] ata2: SATA max UDMA/133 abar m2048@0xf7a22000 port 0xf7a22180 irq 45
[ 0.475339] ata3: DUMMY
[ 0.475340] ata4: DUMMY
[ 0.483062] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.764471] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.794476] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.797272] ata1.00: ATA-9: Corsair Force LX SSD, N0307A, max UDMA/133
[ 0.797277] ata1.00: 250069680 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
[ 0.797611] ata1.00: configured for UDMA/133
[ 0.797790] scsi 0:0:0:0: Direct-Access ATA Corsair Force LX 7A PQ: 0 ANSI: 5
[ 0.817843] usb 2-5: new high-speed USB device number 2 using xhci_hcd
[ 0.888974] hub 1-1:1.0: USB hub found
[ 0.889039] hub 1-1:1.0: 8 ports detected
[ 1.118072] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.121576] ata2.00: ATAPI: TSSTcorp CDDVDW SU-228FB, AS00, max UDMA/100
[ 1.126383] ata2.00: configured for UDMA/100
[ 1.134312] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SU-228FB AS00 PQ: 0 ANSI: 5
[ 1.145602] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.145650] sd 0:0:0:0: [sda] Write Protect is off
[ 1.145655] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.145664] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.149453] sda: sda1 sda2 sda3
[ 1.149802] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.159142] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.159146] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.159335] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.270792] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.332987] systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 1.333146] systemd[1]: Detected architecture 'x86-64'.
[ 1.333579] systemd[1]: Set hostname to <hal>.
[ 1.390731] systemd[1]: Starting Login Prompts.
[ 1.390866] systemd[1]: Reached target Login Prompts.
[ 1.390892] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 1.391053] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.391068] systemd[1]: Expecting device dev-sda1.device...
[ 1.391131] systemd[1]: Starting Swap.
[ 1.391189] systemd[1]: Reached target Swap.
[ 1.391204] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 1.391237] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.391251] systemd[1]: Starting Root Slice.
[ 1.391516] systemd[1]: Created slice Root Slice.
[ 1.391530] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 1.391586] tsc: Refined TSC clocksource calibration: 2394.457 MHz
[ 1.391660] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1.391676] systemd[1]: Starting Journal Socket.
[ 1.391774] systemd[1]: Listening on Journal Socket.
[ 1.391804] systemd[1]: Starting User and Session Slice.
[ 1.391891] systemd[1]: Created slice User and Session Slice.
[ 1.391899] systemd[1]: Starting Journal Socket (/dev/log).
[ 1.391955] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.391963] systemd[1]: Starting Delayed Shutdown Socket.
[ 1.392014] systemd[1]: Listening on Delayed Shutdown Socket.
[ 1.392021] systemd[1]: Starting LVM2 metadata daemon socket.
[ 1.392076] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 1.392083] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 1.392142] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 1.404539] systemd[1]: Listening on Journal Audit Socket.
[ 1.404567] systemd[1]: Starting System Slice.
[ 1.404753] systemd[1]: Created slice System Slice.
[ 1.405170] systemd[1]: Started Set Up Additional Binary Formats.
[ 1.405256] systemd[1]: Mounting Debug File System...
[ 1.405704] systemd[1]: Starting Setup Virtual Console...
[ 1.406206] systemd[1]: Starting Journal Service...
[ 1.406973] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 1.407431] systemd[1]: Starting system-getty.slice.
[ 1.407583] systemd[1]: Created slice system-getty.slice.
[ 1.407652] systemd[1]: Mounting Huge Pages File System...
[ 1.408243] systemd[1]: Started File System Check on Root Device.
[ 1.408275] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 1.408675] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 1.408786] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 1.408802] systemd[1]: Starting Encrypted Volumes.
[ 1.408843] systemd[1]: Reached target Encrypted Volumes.
[ 1.408860] systemd[1]: Starting udev Control Socket.
[ 1.408920] systemd[1]: Listening on udev Control Socket.
[ 1.409625] systemd[1]: Mounting Temporary Directory...
[ 1.410189] systemd[1]: Starting udev Kernel Socket.
[ 1.410267] systemd[1]: Listening on udev Kernel Socket.
[ 1.410296] systemd[1]: Starting udev Coldplug all Devices...
[ 1.411636] systemd[1]: Started Load Kernel Modules.
[ 1.411663] systemd[1]: Mounted FUSE Control File System.
[ 1.411711] systemd[1]: Mounting Configuration File System...
[ 1.412105] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.412517] systemd[1]: Starting Remote File Systems.
[ 1.412594] systemd[1]: Reached target Remote File Systems.
[ 1.412633] systemd[1]: Starting Apply Kernel Variables...
[ 1.413108] systemd[1]: Expecting device dev-sda3.device...
[ 1.413180] systemd[1]: Starting Slices.
[ 1.413242] systemd[1]: Reached target Slices.
[ 1.413268] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 1.413329] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.413348] systemd[1]: Starting Paths.
[ 1.413415] systemd[1]: Reached target Paths.
[ 1.413980] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 1.415449] systemd[1]: Started Setup Virtual Console.
[ 1.417502] systemd[1]: Mounted Configuration File System.
[ 1.417780] EXT4-fs (sda2): re-mounted. Opts: data=ordered,discard
[ 1.419393] systemd[1]: Mounted POSIX Message Queue File System.
[ 1.420243] systemd[1]: Mounted Debug File System.
[ 1.420980] systemd[1]: Mounted Huge Pages File System.
[ 1.421670] systemd[1]: Mounted Temporary Directory.
[ 1.422842] systemd[1]: Started Remount Root and Kernel File Systems.
[ 1.431714] systemd[1]: Started Apply Kernel Variables.
[ 1.432536] systemd[1]: Started udev Coldplug all Devices.
[ 1.437198] systemd[1]: Starting Load/Save Random Seed...
[ 1.438791] systemd[1]: Started Rebuild Hardware Database.
[ 1.438826] systemd[1]: Started Rebuild Dynamic Linker Cache.
[ 1.438844] systemd[1]: Started First Boot Wizard.
[ 1.438860] systemd[1]: Started Create System Users.
[ 1.438917] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 1.443195] systemd[1]: Started Load/Save Random Seed.
[ 1.459454] systemd[1]: Started Create Static Device Nodes in /dev.
[ 1.460356] systemd[1]: Starting udev Kernel Device Manager...
[ 1.461282] systemd[1]: Starting Local File Systems (Pre).
[ 1.461977] systemd[1]: Reached target Local File Systems (Pre).
[ 1.531924] systemd[1]: Started udev Kernel Device Manager.
[ 1.553706] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.556325] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 1.561234] ACPI: Lid Switch [LID]
[ 1.561319] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 1.561324] ACPI: Sleep Button [SLPB]
[ 1.561393] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.561396] ACPI: Power Button [PWRF]
[ 1.580408] ACPI: AC Adapter [AC0] (on-line)
[ 1.606236] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.610817] [drm] Initialized drm 1.1.0 20060810
[ 1.647229] ACPI: Battery Slot [BAT0] (battery present)
[ 1.647475] wmi: Mapper loaded
[ 1.677123] sound hdaudioC1D0: CX20751/2: BIOS auto-probing.
[ 1.677422] sound hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 1.677426] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.677429] sound hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 1.677431] sound hdaudioC1D0: mono: mono_out=0x0
[ 1.677433] sound hdaudioC1D0: inputs:
[ 1.677436] sound hdaudioC1D0: Internal Mic=0x1a
[ 1.677439] sound hdaudioC1D0: Mic=0x19
[ 1.677929] thermal LNXTHERM:00: registered as thermal_zone2
[ 1.677933] ACPI: Thermal Zone [THRM] (42 C)
[ 1.678052] sound hdaudioC1D0: Enable sync_write for stable communication
[ 1.680963] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input5
[ 1.681093] [drm] Memory usable by graphics device = 2048M
[ 1.681097] checking generic (d0000000 408000) vs hw (d0000000 10000000)
[ 1.681099] fb: switching to inteldrmfb from EFI VGA
[ 1.681124] Console: switching to colour dummy device 80x25
[ 1.681211] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
[ 1.681232] [drm] Replacing VGA console driver
[ 1.681254] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[ 1.686528] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 1.693423] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [78:24:af:6c:a3:75]
[ 1.701875] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.701878] [drm] Driver supports precise vblank timestamp query.
[ 1.701979] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.709764] systemd[1]: Found device Corsair_Force_LX_SSD 3.
[ 1.710440] systemd[1]: Found device Corsair_Force_LX_SSD ESP.
[ 1.710484] systemd[1]: Mounting /boot...
[ 1.711777] systemd[1]: Starting File System Check on /dev/sda3...
[ 1.717424] iTCO_vendor_support: vendor-support=0
[ 1.717576] AVX2 version of gcm_enc/dec engaged.
[ 1.717578] AES CTR mode by8 optimization enabled
[ 1.717646] cfg80211: Calling CRDA to update world regulatory domain
[ 1.717946] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.717986] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 1.718109] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.718376] media: Linux media interface: v0.10
[ 1.727078] systemd[1]: Starting Sound Card.
[ 1.727130] systemd[1]: Reached target Sound Card.
[ 1.729262] asus_wmi: ASUS WMI generic driver loaded
[ 1.729427] Linux video capture interface: v2.00
[ 1.730834] asus_wmi: Initialization: 0x1
[ 1.730877] asus_wmi: BIOS WMI version: 7.9
[ 1.730930] asus_wmi: SFUN value: 0x4a0877
[ 1.731917] alx 0000:02:00.0 enp2s0: renamed from eth0
[ 1.732263] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input10
[ 1.748309] fbcon: inteldrmfb (fb0) is primary device
[ 1.751204] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 1.761392] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 1.765545] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 1.772307] asus_wmi: Backlight controlled by ACPI video driver
[ 1.794652] uvcvideo: Found UVC 1.00 device USB Camera (0bda:57b4)
[ 1.797927] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0013 detected
[ 1.798396] intel_rapl: Found RAPL domain package
[ 1.798398] intel_rapl: Found RAPL domain core
[

Still no ideas ?

Laptop keyboard and touchpad not working in Windows 8.1

I just upgraded my S875-S7248 to Windows 8.1 last night. At first, everything seemed to be fine. However, this morning, the keyboard and touchpad had stopped working, and nothing I've tried has fixed it. After some research, I figured out how to open the Device Manager, and the both devices are showning the infamous yellow triangle. When I click on the device, I see the message "Windows cannot start this hardware device because its configuration information (in the registry) is imcomplete or damaged (Code 19)". Both devices are PS/2 devices, and I have tried uninstalling and reinstalling the device, and updating the driver, but to no avail. In addition, I've run the Toshiba Service Station driver update, but it doesn't retrun any new updates either.
So, short of unstalling Windows 8, what can I do to fix this?
Solved!
Go to Solution.

Hi rmikereese
I had the same issue - but luckily you dont have to uninstall Windows 8 (at least I didn't need to)
Running a system restore should bring your computer before you installed the "critical updates" from Toshiba. Fortunately I had a usb mouse already installed (because like you, my touchpad was also not working)
1. Restart Computer and Sign In
Note: I had to use the on-screen keyboard option found on the Ease of Access found at the bottom left of the screen
2. Right Click on "My Computer" (aka "Computer" aka "This PC") and click on Properties
3. Click on System Protection (3rd option on the left menu)
At this point a new System Properties window will pop up already on a System Protection tab
4. Click System Restore...
5. Choose restore point --> I had an option for "Windows Update" which was a "Critical Update"
My computer reset the registry and my touchpad and keyboard began working again!
When Toshiba tells you that you have Updates (Toshiba Support Driver) IGNORE IT!
Hope this works for you!
-Joe

Lenovo Care button not working please help!

hello everyone. i upgraded my Lenovo 3000 N200 0769-B9G from windows vista home basic to windows 7 ultimate recently. everything works fine but the lenovo care button is not working. While installing windows 7, it gave a warning saying "lenovo care manager" might not work properly... etc... is there a driver i have to install to fix this? any help would be appreciated.

You have to reinstall Rescue and Recovery. Go here to download: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-4Q2QAK
Bill

Lenovo Z5070 Touchpad not working

Similar Messages

Maybe you are looking for