Lenoxo X200 con Error 2100

Hola!
tengo en mis manos un Lenovo X200, que hace una semana presenta al boot el error 2100 de HDD. probé reiniciarlo varias veces, quitar el Disco duro, revisar los pines, formatearlo y nada, ni el CD de instalación de windows 7 ni los live CD de linux que probé logran reconocer el disco duro. El Disco duro en cuestion es un Seagate Momentus 5400.3 de 80GB
¿Algun dato respecto a este error? ¿Soluciones Posibles? ¿Alguien logró repararlo?
P.D. Ya probe la actualización que se sugiere aquí para el modelo http://support.lenovo.com/cl/es/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-x20...
Saludos!
"Pronto, los hermanos no se batirán con sus hermanos; los niños ya no serán privados del sol, ni alejados del verdor de los campos; ya no está lejano el día en que ha de haber un pan para cada boca, un lecho para cada cabeza, felicidad para cada corazón." B. Vanzetti
¡Resuelto!
Ir a solución.

En mi experiencia un disco roto es casi imposible de reparar, a menos que lo lleves a un lugar especializado en esas cosas, que no creo sean baratos.
Tienes alguien que te preste un disco duro SATA de 2.5" para confirmar que la X200 funciona bien? Eventualmente podria ser que el conector del disco duro este defectuoso o mal conectado a la motherboard.
Como ultima alternativa puedes probar de quitar el teclado, el disco duro y probar que el conector de HDD este bien conectado a la motherboard. Fijate en la foto de abajo como ejemplo:
El conector esta debajo de la chapa de metal marcada con la flecha roja. Prueba si esta bien conectada.
Para remover el teclado sigue las instrucciones del capitulo 1040 de este manual: click aqui!
Espero esto te ayude...
/L40SX/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E/A20p/A22p
A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T4x0x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/10*X2xx/2*X200T/4*X30x/Z60m/3*Z61x
Comunidad en Español English Community Deutsche Community Русскоязычное Сообщество

Similar Messages

Error 2100: HDD0 initializing error (1)

Hello.
I have W510 and change a standart HDD to SSD Corsair Force F240. And allready second time today have an error while power on:
error 2100: HDD0 initializing error (1)
how i can fix it? thanks
Stas.

This definitely appears to be a hard drive issue, possibly linked to the firmware or OS settings.
On a T410 and a refurbished Western Digital Scorpio Black 320 GB the system ran fine (Win 7 Pro), *but* at some times would get that error on boot. Either rebooting or switching from ACHI to Compatibility mode would correct the issue, but never permanently. That T410 never has any issue with other drives.
This seems to be a timing issue with the HD being recognized in time: sometimes just hitting the Thinkvantage blue button at startup is enough to get the drive to be recognized. This may also be why changing from ACHI to Compatibility helps.
So my take is to *just* try another hard drive first, possibly cloning it on another system where it is recognized. And WD refurbished no more for me. It was a poisoned gift.
Asus LG5, Toshiba M3, HP nc4400, Thinkpad R50, T60, T61, T61p, X200 Tablet, T410, W500, T430s

Nome evento problema:     APPCRASH   Nome applicazione:     iTunes.exe   Versione applicazione:     11.1.4.62   Timestamp applicazione:     52ddbf7a   Nome modulo con errori:     StackHash_1025   Versione modulo con errori:     6.0.6002.18881   Timestamp

Nome evento problema:    APPCRASH
Nome applicazione:    iTunes.exe
Versione applicazione:    11.1.4.62
Timestamp applicazione:    52ddbf7a
Nome modulo con errori:    StackHash_1025
Versione modulo con errori:    6.0.6002.18881
Timestamp modulo con errori:    51da3e27
Codice eccezione:    c0000374
Offset eccezione:    000b06fc
Versione SO:    6.0.6002.2.2.0.256.6
ID impostazioni locali:    1040
Informazioni aggiuntive 1:    1025
Ulteriori informazioni 2:    491df5c84464b99ef8f61e542b4c9ce4
Ulteriori informazioni 3:    9ade
Ulteriori informazioni 4:    7f7b00bf8397fb6909813f504d7de648

Nome evento problema:
APPCRASH
Nome applicazione:
Adobe Premiere Pro.exe
Versione applicazione:
5.0.3.0
Timestamp applicazione:
4ce382d1
Nome modulo con errori:
StackHash_8659
Versione modulo con errori:
6.1.7601.18247
Timestamp modulo con errori:
521eaf24
Codice eccezione:
c0000374
Offset eccezione:
00000000000c4102
Versione SO:
6.1.7601.2.1.0.256.48
ID impostazioni locali:
1040
Informazioni aggiuntive 1:
8659
Ulteriori informazioni 2:
865914f2b0aba0a7f763eb3f160d9c9b
Ulteriori informazioni 3:
5def
Ulteriori informazioni 4:
5defc8630ba14d9bda1ae72188ae0e03@
E' da quando ho istallato il plug-in Heroglift della Pro-Dad
Fino ad ora con istallati: Magic Bullet, New Blue, ProDad Vitascene e Boris non mi aveva dato eccessivi problemi.
Qualcuno ha avuto la stessa triste esperienza? Grazie e spero qualcuno possa aiutarmi

Posseggo Adobe acrobat 7 professional, dopo l'aggiornamento a Windows 8.1 al tentativo di avvio esce pop up con errore: (0xc00000fd) come risolvere?

Posseggo Adobe acrobat 7 professional, dopo l'aggiornamento a Windows 8.1 al tentativo di avvio esce pop up con errore: (0xc00000fd) come risolvere?

I own office 2013.
I'm Italian and I can not understand why the most of what she tells me, I can do something to solve the problem or there is no solution?
Messaggio originale----
Da: [email protected]
Data: 28/07/2014 15.37
A: "Luciano Graniello"<[email protected]>
Ogg: Posseggo Adobe acrobat 7 professional, dopo l'aggiornamento a Windows 8.1 al tentativo di avvio esce pop up con errore: (0xc00000fd) come risolvere?
    Posseggo Adobe acrobat 7 professional, dopo l'aggiornamento a Windows 8.1 al tentativo di avvio esce pop up con errore: (0xc00000fd) come risolvere?
    created by Bill@VT in Acrobat Installation & Update Issues - View the full discussion
In AA7, PDF Maker is a plugin for OFFICE 2003 and earlier that is a preprocessor for the printer. It simply provided the essence of PDF Marks that were then processed by Distiller once the printer completed the creation of the PS file. AcroTray was to automate the process by invoking Distiller to process the PS file and create the PDF. The latter fails with Win7, as does the printer itself. I have been successful at installing AA7 on both 32 and 64-bit versions of Win7. However, the installation of an additional PS print driver and the extra steps to create the PDF were necessary.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6590312#6590312
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
     To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

CFMEDIAPLAYER Shows Conn Error When I Use It

I have ColdFusion 9 installed and have been trying out some of the new tags. In trying to use cfmediaplayer I am not able to play an FLV video located on the same site as the calling page. The tag is this:
<cfmediaplayer autoplay="false" name="GeorgeAndGracie" controlbar="true" fullscreencontrol="true" source="Videos/GeorgeGracie.flv">
There is another thread that discusses this and suggests adding the proper MIME type to our IIS server, but that has been done already. There are a couple other links in the other thread, but the links take me to an Adobe forum post that says I don't have permissions to view it:
http://forums.adobe.com/message/2107303#2107303
http://forums.adobe.com/message/2107540
So I am at a loss. I have tried the tag above using a root-relative address ("/Videos...") and a full URL starting with http, but nothing seems to help.
The paths to the various pieces inside the CFIDE folder should work, because I am seeing the correct-looking JS code in the browser source and I am getting the media player to show up. It is only when I click the Play button that I see "Conn Error".
Has anyone else had this trouble (and fixed it, I hope)? Thanks.

The <%@ page import=" "%> tag is used to import other packages/ classes in other packages into your JSP/source file. You cannot import the classes of the same package, which you seem trying to do.
Hence the error!!!
fun_one

OS X Clients won't bind to 10.7.3 Server. Error 2100

I have a Server running 10.7.3, my clients also 10.7.3 will not bind to the OD. It returns the error 2100. I did some reasearch and apparently this issue is to do with having an SSL on the OD, but I don't have an SSL running on it. Does anyone know the fix for this or is any one else having this issue? Any help appreciated.

I too tried to down load Lion! twice, but my iMac would not accept the down load. I went to the Woodlands Tx Apple store where Manager Luke supplied me with a thumb drive. This is where the real fun started. I loaded Lion from the Thumb drive which took 6 hours, and then the iMac would not connect to the internet, or run any applications more than once without being re-booted. So I figured I needed to run update to download any patches, This created even more fun. After having the machine run over night down loading available patches (4) they were still not complete. I took the iMac to the Apple store, I spent 2.5 hours watching the techs confirm what I had already explained. The techs found no problems with hardware. So their big fix was to format the hard drive and install Lion. They did this and attempted to reload my added apps and data back. All the techs at the Apple store were great, But Apple quality is no different than any other computer company yet they charge 3 times more. All this started because of a "simple" switch from Mobilme to iCloud. This is a very expensive "free" "upgrade". My suggestion is that if you absolutely have to have icloud, wait until the last minute, take your machine to an Apple store for installation. Also be prepared to lose use of Quicken, and most other aftermarket apps, plus any virus software you have. What makes it even worse is I just received a receipt for purchasing Lion as a down load when it never worked and I had to get a thumb drive version from the Apple store.
Do not attempt this conversion on your own and still be prepared to waste a couple days getting your machine back to being productive.

SSD Patriot Warp V2 64gb & 128gb & Lenovo T61P - error 2100 hard disk failed initialisation

Hi guys. I have recently purchased 2 SSD drives - 1x64gb & 1x128gb. I have the 64gb hooked up to the home pc and is running as the C:\ system drive. I wanted to hook up the 128gb drive to my notebook, but I keep getting an initialisation error (2100) - I have tried AHCI and Compatibility Mode, as well as look up various firmware upgrades and hdd firmware upgrade options via Lenovo.
I was just curious if anyone has had problems with this on there system, and if so, how did you overcome it. I have tried both drives on my notebook, both providing the same error, but both work on the desktop system.
I have a strong feeling it is to do with a firmware upgrade through Lenovo (ibm), as I have the most recent upgrade which is already a few months old... Hope to hear something good soon... Thnx guys in advance.

Hi haspac2,
Welcome to the forum!
Check out following links for ROM not initialized error:-
http://forum.thinkpads.com/viewtopic.php?t=29472
http://digitalchunk.com/expansion-rom-not-initialized-pci-on-motherboard-t60.htm
As for HDD initialization error check following link:- http://www-307.ibm.com/pc/support/site.wss/MIGR-42321.html
To install Win XP, SATA AHCI needs to be changed to Compatibility mode in the BIOS for HDD. - Config - > SATA - > Compatibility.
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

T61P HDD Error 2100

Hey all, I have a T61P which I was running Windows 7 on. Two days ago my hard drive crashed. Following the boot screen there are two beeps and then I get an error 2100 message. I went out and bought a new hard drive and installed Windows 7 on it. As I was installing Windows updates and Thinkpad drivers the hard drive crashed and again goes from boot screen to an Error 2100 message. What can this be and how can I fix it? Any help would be appreciated.

Reseating sometimes helps, a while ago I was updating 6GB to 20GB on my IBM 240, I noticed that the ThinkPad sometimes threw HDD error, I reseated the drive and noticed that one of the HDD pins was little bit crooked, I straightened it out and never got any error ever since.
There is an HDD firmware update, see if your drive qualiifies:- http://www-307.ibm.com/pc/support/site.wss/MIGR-63685.html
From the txt file:-
This firmware update includes the fix for the case on a system with
Windows Vista, that the system may display the following error
message at each power on, and then cannot boot from the hard drive.
"2100: Initialization error on HDD0 (Main hard disk drive)"
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Nombre del evento de problema:APPCRASH Nombre de la aplicación:Adobe Premiere Pro.exe Versión de la aplicación:6.0.5.0 Marca de tiempo de la aplicación:5211d7f5 Nombre del módulo con errores:ntdll.dll Versión del módulo con errores:6.1.7601.1824

Nombre del evento de problema:
APPCRASH
Nombre de la aplicación:
Adobe Premiere Pro.exe
Versión de la aplicación:
6.0.5.0
Marca de tiempo de la aplicación:
5211d7f5
Nombre del módulo con errores:
ntdll.dll
Versión del módulo con errores:
6.1.7601.18247

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

Ripristino iphone con errore 1015

Ho aggiornato il mio iphone 3GS con itunes e mi si è bloccato con errore 1015. Non si ripristina più. Cosa fare per ripristinarlo???????
Grazie!!!!!!

Error 1015 means that your phone was jailbroken before you updated or restored it.

Smart, Smart con errores

El estado de SMART me pone con errores.
Esta unidad tiene un problema de hardware y no puede repararse. realice una copia de seguridad y reemplace.
Alguien me ayuda? Se me ha jodido el disco duro?
El ordenador funciona perfectamente con lo que no entiendo nada

Le sugiero que descargar una copia de la herramienta Smart 3.0 para tirar de los troncos de SMART de su disco duro. Los registros le ayudarán a determinar el estado de tu disco duro. Le sugiero asegurarse de que sus datos están respaldados por un error de SMART indica su disco duro podría fallar en cualquier momento.
http://www.volitans-software.com/smart_utility.php

Detection Error 2100 - Lenovo X240 with Crucial M500 SSD

I have a new Lenovo X240 out of the box. I immediately upgraded with a Crucial M500 SSD 240mb drive. The computer is running a fresh install of Windows 7 64-bit. The BIOS on the laptop is the most current. The firmware on the M500 is the most current. It seems that every several times I start or reboot the system I receive "DETECTION ERROR 2100". After powering off the machine and powering it on again the computer will boot to Winddows.
I have seen numerous posts about this issue between Crucial vs. Lenovo. I've tried every suggested fix to no avail. I have tried the configuration using an identical, brand new M500 SSD with the same results. Am I missing something?
Thanks in advance for your suggestions,.

Hi Mrtree,
Welcome to Lenovo Community Forums!
I’m sorry to hear that you are facing the issue with SSD drive on ThinkPad X240.
Regarding the issue we have got the same thread in the forum, but it is different model.
I suggest you to chect with the below link to follow the further troubleshooting steps.
Please click here to visit the page, and proceed with the steps provided in that.
Hope this helps. Do post back if issue persists!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Detection Error 2100 - M500 SSD in Lenovo X240 laptop

I have a new Lenovo X240 out of the box. I immediately upgraded with a Crucial M500 SSD 240mb drive. The computer is running a fresh install of Windows 7 64-bit. The BIOS on the laptop is the most current. The firmware on the M500 is the most current. It seems that every several times I start or reboot the system I receive "DETECTION ERROR 2100". After powering off the machine and powering it on again the computer will boot to Winddows. I have seen numerous posts about this issue between Crucial vs. Lenovo. I've tried every suggested fix to no avail. I have tried the configuration using an identical, brand new M500 SSD with the same results. Am I missing something?
Thanks in advance for your suggestions,.

Hello mrtree and welcome to the Crucial forum. I spotted your post yesterday and spent some time Googling for info from the Lenovo support forum last night. I found several things you are probably aware of. First, this Detection Error 2100 is not limited to just the X240 series laptops, there are quite a few other models affected in the same way. Second, it is not limited to only Crucial SSDs, there are people with Samsungs, Toshibas, Intels, and even conventional drives that have experienced this same problem at system boot. These two observations indicate to me that problem is probably related to BIOS/firmware/driver issues. Since you have stated that you already installed the latest BIOS(v. 2.23?) and firmware(chipset v. 9.5.22.1760?), that leaves one area: drivers. From what I can see, the latest Intel RST drivers available are version 12.8.10.1005, dated 1/26/2014. Please be aware that there are seperate downloads for 32 and 64 bit systems. There is also a Solid State Drive Firmware Update Utility listed, but I do not recommend using it since Crucial M500s are not listed in the "Read Me" notes. Which brings up the question of SSD firmware, do you have the MU03 or MU05 firmware installed on your Crucial SSDs? Also, just to double check, do you have AHCI mode enabled in your BIOS settings? You'd be surprised at how many people overlook this. I suppose that Lenovo will get around to releasing updated software addressing this issue, as they have for the other brands of SSD drives, it's just a question of when. Edit: Two more things I thought of after my initail post. First, did you order your M500 directly from Crucial? When I ordered the M500 for my Lenovo T400 Thinkpad, I went to the website and used the advisor to find the M500 part number for my machine. I called to order several days later, and when I gave the part number to the customer representative, she immediately replied "that's for a Lenovo T400, correct?". That tells me there is a part number that is specific to the T400 series, and this may also be the case with the X240 series. Ordering from an online retailer or purchasing the M500 from a store may not have given you the correct part. Second, does your machine have Intel's Management Engine firmware installed, and do you have it enabled? Try entering BIOS and disabling it, just to see if this problem persists. I've noticed that on my T400, when I boot from the DVD drive or a USB stick, I see a brief warning message from the Management Engine stating that I'm not using the normal boot device, but then my machine boots regardless. Perhaps it's causing some sort of grief for your machine.

W520: PNY XLR8 240GB SSD with error "2100: Detection Error on HDD0 (Main HDD)"

When I try to boot my W520, I get a BIOS boot up error : "2100: Detection Error on HDD0 (Main HDD)". I am using PNY XLR8 240GB SSD.
It worked fine for a month.
I also have PGP installed and whole disc encrypted.
I installed an update of Intel Management Engine Firmware and Intel Chipset, both are the latest from lenovo site because I was experiencing expreme slowness from my harddrive. Programs would freeze. Webpages would take forever to load..
The next time I rebooted, I got the error. If I leave the SSD out for a bit, and put the SSD back in, the disk will work for some time... but on next reboot, it is again detection error..
TRIM is enabled on my system. I am not sure how the SSD died so quickly.
I am back to using my HDD but I am not happy. I want a solution... is this a intel chipset issue? Intel IMEI issue? Is the PNY SSD just a bad model?
I've googled plenty and dont really see a solution. Sometimes there is a firmware update.. PNY has no firmware updates for my drive.. I don't see anybody else using PNY on their W520, but plenty of people are experiencing Error 2100 with SSD on their W520.. somethings fishy..
help please! thanks in advance !

No go, the drive is in there pretty firmly, a tech support to PNY said they are going to replace my drive.
They came to the same conclusion I did - which is that the drive is toast..
Drive slow downs and eventually unable to detect points to this.. I was hoping for some firmware update. I am really surprised an SSD died because I thought the whole point of them - no spinning parts - would make them last longer.. but there is some sort of logic board and maybe the flash drive itself went kaput.. who knows.
They do have 3 year warranty on my mode and i'm happy to take it. Luckily my old HDD was still around and works.. so thats what i'll be using for the next few weeks while I ship this to them and have them send me a new one.
I asked about Advanced replacement, which is when they send me a new one before they recieve my current ssd. They said the Advanced replacemenet costs $30, and they would need credit card info to place a charge of the original amount for the drive incase I didnt send in the drive too. So it would cost me $30 plus temporary $100-150 or so... which I opted not to do... So I wait now for a few weeks. I dont know if I'll get another PNY drive in the future. OCZ has faired pretty well for me, I've had 3 of them work on desktops/laptops flawlessly.

Ayuda con Error en After Effects CS6

Alguien porfavor que me pueda ayudar,
Me salen los siguientes mensajes de error en After Effects CS6 al trabajar con el plugin Newton:
AfterEffects error:Error en curso. El último mensaje registrado ha sido: <8796> <DynamicLink> <5> C:\Program Files\Adobe\Adobe Premiere Pro CS6\Adobe Premiere Pro.exe
y luego
After Effects no se puede continuar: Lo sentios, After Effects se ha bloqueado. Para obtener ayuda y soporte de After Effects, visite
http://www.adobe.com/go/lern_ae support_es. Si aún no puede resolver el problema, póngase en contacto con el soporte técnico de Adobe (2).
(0::42)
y el programa se bloquea y se cierra,
qué puedo hacer, cómo lo soluciono, ayuda porfavor
Gracias!!

Bueno, prueba el consejo, casi siempre recomendable actualizar, las aplicaciones y los controladores gráficos que en aplicaciones de video suelen ser la clave.
No aportaste ningun detalle de tu instalación, sistema,... por lo que más dificilmente se te puede ayudar.
El error que de forma parcial comunicabas, te ofrecía dos soluciones:
1. Consultar una página web.
2. Consultar con el soporte técnico de Adobe. Esto, para problemas aleatorios es lo más recomendable.

Lenoxo X200 con Error 2100

Similar Messages

Maybe you are looking for