Lens correction feature completely missing from Develop Module

The lens correction feature has gone missing from the Development Module. It was missing before I upgraded to 5.6 and is still missing. Previously, it was present, so I am wondering if I did anything to hide or remove it?

Right-click on one of the other section headings, such as Tone Curve, Basic, etc. Make sure there is a checkmark in lens corrections. This is how you control which develop features you want displayed on your system. Sometimes features disappear mysteriously.

Similar Messages

Lens corrections panel is missing from LR4 Beta on righthand side. How do I get it back? Thanks!

My lens corrections panel is missing from LR4 Beta on righthand side. How do I get it back? Windows 7 SP1.
Thanks for any help.
Tillman

Right-click any other panel head(such as Basic panel), you can turn on/off any panel in context menu list

All panels are missing from development module

Can anyone help me. I have been using lightroom for some time. Then today for some reason, not only did my basic panel disappear but also every other panel under the development module disappeared so I can't even right click on on say, the "Tone Curve" or "Lens Correction" to bring back the basic panel because every panel is missing. Can anyone help me? I have uninstalled lightroom and re-installed but still nothing. I have no idea how to fix this issue.

In develop, press Ctrl+1 (Cmd+1 on Mac) for the basic panel. Then right-click (control+click) to choose others.
Or use the Window menu.

Basic settings tab missing from Develop module

I recently bought lightroom 4 after using the free 30 day trial, and i have no basic settings on my mac, can't find them anywhere? My tabs go from histogram to colour curve. Where are they?
Very confused..
Message title was edited by: Brett N

No need to be confused, you've probably inadvertently hidden it. The thing is that in every Module, all the individual panels in each of the left and right-hand columns can be optionally shown or hidden under user control (there are few minor exceptions such as the Navigator, but by and large this control is available throughtout Lightroom).
So to bring up the options for each column (in your case the right-hand column of the Develop Module), simply right-click (ctrl-click on Mac) on ANY of the headers that are showing in that column and you'll see a pop-up context menu like the attached screenshot. Here you can see that I've previously hidden the Basic panel, so all I need to do is click on the Basic line and it's restored. Conversely, I can use this method to hide a panel.

Lens Correction Feature Not Showing Up

I have Lightroom 5.3 and the Lens Correction feature is not showing up in the Develop module. Any suggestions on how to access this feature?
Thanks,

Right-click on one of the other section titles (Basic, Tone Curve, Detail, etc) and put a checkmark next to Lens Corrections.

Problems losing quality when going from develop module to library module ?? anyone have a fix

Problems losing quality when going to library module from develop module. Sharpness and color quality decrease

This is normal. There will be a difference as you are comparing Library Previews with the image in Develop which accesses the original file, although the difference is usually slight. Real results need to be judged from exporting after selecting the output sharpening e.g. for glossy paper, if printing or screen sharpening for web images or emailing.
The idea with sharpening is to apply capture sharpening so that the image in Develop looks just sharp but not over sharp. Lightroom then uses the correct algorithm for output sharpening based upon image size and quality settings etc.

All of my titles, themes and generators seem to be completely missing from Final cut pro x. Do you know how to get them back?

All of my titles, themes and generators seem to be completely missing from Final cut pro x. Do you know how to get them back?

Do you mean that when you click the title browser, for example, nothing is there?
Do you at least see several categories listed in the effects browser?
First make sure that you have nothing typed into the search box (not even spaces).
If you still see nothing, try this in order:
1) Window->Revert to Original Layout
2) Quit FCP X, delete preferences using Preference Manager (a free download from Digital Rebellion)
3) Download FCS Remover, and use it to completely remove FCP X. This will NOT delete your content, just the application.
4) Reinstall FCP X from the Mac App Store: log in with the same Apple ID that you used to buy FCP X, click on "Purchases", locate FCP X and click Install.

Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from l

Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from lightroom?

In the printer driver (accessed through the Page Setup button) set the Advanced tab to borderless. Then in the right hand panel under Layout set all the margins to zero.

Lens Correction Feature

I have the latest version of Lightroom, 3.4.1.
Lately, I have been using the Lens Correction feature more and more.
I have 3 Nikon lenses and one Tamron lens.
I have noticed that when I check the box to Enable Profile Corrections, it automatically finds the correction if it is one of the 3 Nikon lenses.
However, if the image was taken using the Tamron lens (28 - 300 mm), LR does not automatically find the profile. The message is "Unable to locate a matching profile automatically." When I enter "Tamron" in the Lens Profile Make, then LR automatically finds this particular lens.
Is there a reason LR finds the profile fully automatically for the Nikon lenses but does not do so for the Tamron lens?
Thanks

I did what I think you are suggesting, and this is what happened.
I went to a picture taken with that Tamron lens. I clicked on "Enable Profile Corrections." At that point, "None" showed in the Make field as well as in the Model and Profile fields.
I then selected "Tamron" to be in the Make field. Both the Model and Profile fields then were populated (and, the Model field was populated with the correct 28 -300 mm lens).
Then under "Setup," I did select "Save New Lens Profile Defaults."
I went to the next picture and again selected "Enable Profile Corrections." This time, the Make, Model, and Profile fields were properly populated because that next picture was taken with that 28 - 300 mm Tamron lens.
However, I skipped a few pictures ahead, to a shot taken with a Nikon lens, and this time when I selected "Enable Profile Corrections," instead of putting the Nikon lens information in those fields, it put the Tamron 28 - 300 mm lens information in those fields.
It appears as if perhaps I will have to "Save New Lens Profile Defaults" every time I go to a new photo which uses a different lens, unless I am not understanding what you have suggested to do.
Thanks

My Lens Correction Feature Disappeared on my Lightroom/My Sigma 10-20mm Lens is not there

My Lens Correction Feature Disappeared on my Lightroom/My Sigma 10-20mm Lens is not there

The profile is applied automatically. Therefore, nothing for you to.

DSL/ Col Adj/ B&W section missing in Develop module

Hi there,
I'm probably being an idiot here (usually the case) but I seem to have lost the DSL/ Col Adj/ B&W section down the right hand side in the develop module. Running top to bottom I have:
Basic
Tone Curve
Split Toning
Detail
Lens Corrections
Effects
Camera Callibration
I've definitely used it before but it just seems to have vanished! Is there an option I've turned off in one of the menus?
Any help greatly appreciated!
Many thanks!

Hey presto!
Thanks Rikk, that's done the trick! I'm just getting to grips with Lightroom and am following all the various instruction videos... just couldn't find one that solved that problem!
Thanks so much for your help.

Basic panel disappeared from Develop module. LR 5.7 Mac OS 10.10.1 Tried control clicking headers of panels that are still there. Do not get a pop up list. Can't find way to restore. What should I do?

Basic panel in the Develop model no longer appears. Started this afternoon. Been using LR 5 since it came out. No problem before today. Searched forums and did the control click on develop module headers. Check list doesn't appear. What do I do next? I did a Time machine restore but nothing changed.

I have now tried control click, command click, option click and combinations of these on 2 computers running the same lightroom versions, same Mac OS with the same result. No list of develop headers, no way to check/ uncheck.
LR on my MacBook has all the panels. On my iMac Basic and Split Toning are missing.
The only result of clicking is collapsing or expanding the individual sliders under the headers.
My only thought now is to find the preference files for LR and delete them and see if the missing panels return. Any other suggestions?
Sent from my iPad

Tutorials on ACR 6.1 new Lens Correction features

Hi,
We are all experienced users of cameras/Photoshop/ACR etc., and wizards at learning by trial-and-error, but I think it might be really helpful if there was a good tutorial (preferably by Adobe), to deal with the new features of lens corrections in ACR 6.1, to take out some of the guesswork.
There are items to be addressed, like for instance, the difference between Default-Auto-Custom in Lens Profiles page, why the lens profiles seem to depend only on lens type, while in Photoshop they depend on Camera/Lens combinations, how to prevent double correction, and many others.
If anyone knows of such tutorials, I'll be grateful if they can share.
Thanks,
Moshe

The "Chicken Little" as you call it, isn't aimed at you, unless you want to claim ownership. It isn't mine either. The sky's not falling but there are a few heavy showers about.
I have taken the time and if you examine what I said, I am including the auto corrections in PhotoMerge as part of the whole. Particularly Photomerge at this point.
If you have taken the time to read what I said I pointed out that Lens Correction will attempt to correct the image if you ignore the warning that no profile exists. I couldn't know that unless I tested it.
If you took the time to read my posts earlier in the Profile Creator Forum, would would know that I actually ran tests on the Lens Profiler for the one lens in Adobe's collection I use, against the DXO output and found Adobe's correction way out of line. And to put to rest the notion I don't know what I am talking about, I have used this lens with architectural subjects and the barrel/pincushion distortion is very well corrected with DXO.
But then you are busy I'm sure and would not necessarily know or remember all that. Strange, you do recall just enough to give you ammunition to insult.
So bottom line for me is this:
Lens Correct is set unchecked. I'll look from time to time as more corrections show up, and if I find them satisfactory and at least equivalent to DXO, I'll use it. Why not? It fits the workflow so much better. And I'll come back and share my findings. So Lens Correction in ACR won't affect me.
Photomerge using Geometric Correction in Auto is a non-starter. I really like it better for some stitches than Reposition, but Reposition in CS3 is better than Reposition in CS5 (or 4) which is why I would go back to it.
Yes, it is complicated, complex even. What I am doing is simplifying it best I can so I can work at photography, not test and measurement.
Message was edited by: Hudechrome

Mail is completely missing from settings.

The Mail icon suddenly disappeared from my Ipad Mini. The Mail Settings category is completely missing within the General Setting screen as well. How don't I restore the settings?

Hi Mikenal,
If you are having issues with your iPad's Mail application being missing from your applications as well as from Settings, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
Force an app to close in iOS
Next, I would try restarting and if needed resetting the iPad -
Restart or reset your iPhone, iPad, or iPod touch
If the issue is still present, you may want to restore the iPad as a new device -
How to erase your iOS device and then set it up as a new device or restore it from backups
Thanks for using Apple Support Communities.
Best,
Brett L

Remove a line from develop module history

Hi, is it possible to remove a line (and the action related to it) from the history of the develop module ?
As I explain in another thread, Lightroom reinit all my modification after a "Read metadata from file" and I want to remove this action.
Thank you !

Hi Booby,
You could use an XSL-mapping for this purpose:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format">
    <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
    <xsl:template match="/">
        <xsl:copy-of select="."/>
    </xsl:template>
</xsl:stylesheet>
Sorry, i didn't read that you dont want a map, if you dont find the adapter solution you can use this map
I've seen this option in the module adapter, but i dont test it:
Regards
Message was edited by: Iñaki Vila

Lens correction feature completely missing from Develop Module

Similar Messages

Maybe you are looking for